Bloons Tower Defence 5 Deluxe

Similar Questions

• How can I make a tower defense game in Adobe Flash?

  I am a Flash newbie who wants to make a Flash game. However, the only explanation on what makes a Tower Defence game that I found is this one: http://www.emanueleferonato.com/2007/10/06/make-a-flash-game-like-flash-element-tower-defe ESN-part-1 / # comment - 675488

  However, he uses a program that is unknown to me when I got the Adobe Flash Pro. CS5 (trial version) after a few searches on Google.

  Can someone help me with this?

  Right-click of the FLA and click on "open with...". "and navigate in Flash cs5.

• Videos and games does not work, Mac Snow Leopard

  It is a problem, that I actually had for a while, but it never really touched a large part that I thought it was important. Now it is just boring.

  In fact, some video players and games online does not work. Most video players outside of YouTube will not work. The player will load, but the video never does. For example, the last video with that I got in trouble is the video player of Nickelodeon for the legend of Korra. When I try to watch that, I get a black box and an image of type "Loading" appears, swirls around once and then disappears. After that, it becomes unresponsive. This is typical of many, but not all, video players, I met on the web.

  I don't know if it's related, but I also had problems with various games. Often times, they work very well until at some point, as the end of a level, transition and then they will become numb. A good example here is the game Bloons Tower Defense 4. It is a game that I know was on my old system. But now, when it loads the level, it freezes before loading the tours available to place and reacts differently. An example is shown below. The box top-left question mark in the right sidebar should reveal a dart monkey and my money of departure must be filled, but instead, the game crashes to the top. I had similar blockages on a number of games, so I am sure that the problem is not just with this game.

  

  As I said, I had this problem for awhile now. I have updated Flash and my browsers several times since they started. I have these problems in all my browsers (Safari, Opera, Camino, Firefox), there seems to be a problem with Flash. I also tried to uninstall and reinstall flash, and disable all other plugins browser.

  I use a MacBook Pro with Macintosh OS X 10.6.8 leopard snow, 2.53 GHz Intel Core i5, with Flash 11.2.202.233. Current browsers: Firefox 11.0, Opera 11.61, Camino 2.1.2 Safari 5.1.5

  Any ideas what I might be dominant?

  These errors make me think that Flash has problems to write to the folder were Flash cookies are stored (LSO, sharedobject).  On Mac, it's

  • ~\Library\Preferences\Macromedia\Flash flash
  • ~\Library\Caches\Adobe\Flash flash

  You can check the permissions for these folders?  You might want to run check the permissions on your disk (http://support.apple.com/kb/HT1452), and then delete the ~\Library\Preferences\Macromedia folder and the folder of player of ~ \Library\Caches\Adobe\Flash.

• Help on code as2 TD

  IM building a tower defence game is one of my codes

  Ive got 7 turns, how could I do so 1 tower could be placed on a movieClip called water, and not on the grass of movieClip

  onClipEvent (load)
  {
  Active = 0;
  }

  onClipEvent (enterFrame)
  {
  If (current == 1)
  {
  setProperty ("", _x, int ((_root._xmouse-10) / 20) * 20 + 20 ");
  setProperty ("", FLF, int ((_root._ymouse-10) / 20) * 20 + 20 ");
  
  hitTestOnGrassMovieClip = _root.grass.hitTest (_x, FLF, 1);
  
  If {(hitTestOnGrassMovieClip)
  gotoAndStop (1);
  _root.Ranger.gotoAndStop (1);
  }
  else {}
  gotoAndStop (2);
  _root.Ranger.gotoAndStop (2);
  }
  
  _root.Ranger._x = _x;
  _root.Ranger._y = FLF;
  _root.Ranger._width = donut _root ["tower_" + round] * 2;
  _root.Ranger._height = donut _root ["tower_" + round] * 2;
  }
  }

  
  (press)
  {
  hitTestOnGrassMovieClip = _root.grass.hitTest (_x, FLF, 1);
  hitTestOnDeSelectMovieClip = _root.deselect.hitTest (_x, FLF, 1);
  
  If (hitTestOnGrassMovieClip: hitTestOnDeSelectMovieClip) {}
  If (hitTestOnGrassMovieClip & & (! _root.hasGameFinished)) {}
  ++ _root.towerCount;
  _root ["tower_" + round] .duplicateMovieClip ("t" + _root.towerCount, 500 + _root.towerCount);
  a = _root ["t" + _root.towerCount];
  a ._x = _x;
  a ._y = FLF;
  a.active = 1;
  a.cost = cost;
  _root. Gold = _root.gold - cost;
  _root.updateInfoBar ();
  
  If it's the first tower being placed
  start the game...
  If (! _root.hasGameStarted) {}
  _root.newLevel ();
  _root.hasGameStarted = true;
  _root.instructions._visible = false;
  }
  
  }
  
  Active = 0;
  setProperty ("", _x, 1000);
  _root.selectedTower = "";
  _root.Ranger._x = 1000;
  _root.Ranger._width = 10;
  _root.Ranger._height = 10;
  }
  }

  for the most part, it's as1 code.

  but use a hittest to ensure a tower can be placed on the water.

• Cannot run Tower Bloxx Deluxe

  Hello world...
  an error message when run Tower Bloxx Deluxe like this:

  Application error
  The procedure * not found in the DLL d3dx9_25.dll

  need help...

  Hi Azheem,

  Welcome to Microsoft Windows Vista Forums.

  Are you trying to play the game online or is installed on the computer?

  I think that the game uses DirectX and which should be updated on the computer.

  If you encounter problems with the installed version of the game, you can seek assistance from Digital Chocolate:
  http://www.digitalchocolate.com/about/support/PC-FAQ.html

  Error message when you try to start a Microsoft game: "the file d3dx9_XX. DLL is not found.

  http://support.Microsoft.com/default.aspx/KB/910813

  Use the link above to download and then install the latest version of DirectX.

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Halima S - Microsoft Support

• CyberLink DVD 2.0 and CD Burner Deluxe - software is no longer on my computer?

  Hello, I bought last December 2010 a tower HP which includes 8 GB of RAM, 1 TB of memory, she understood 2.0 Cyberlink DVD and CD Burner Deluxe which was already part of my package of included software. I had used it once or twice and it worked fine, then for some reason any, it is more so on my computer? I was able to make up for it because the HP docking station includes features such as Burning CD and DVDs and stuff. I did not burn any for several months, but I've done several copies of a video that I made for a family celebration, several months ago. Now, I had to make another copy, and there is no option to burn the DVD even. Is anyway to download this software that I use to have somehow deleted from my system? Thank you.

  Thank you!  In fact, I was able to call the GEEK SQUAD last night after you answered and they found the software hidden on my computer.  It's in a really weird file that I put it in.  I appreciate the advice!  Thank you.

• G4 tower: sell or recycle?

  I have a G4 tower Leopard running with 500 GB memory and 1 GB of RAM. recently wiped everything.

  anyone, anywhere even he wants? should I just send it to recycling?

  Unfortunately, they are not worth much, still it would be useful to someone, somewhere, problem is to find the... I'd like to see if there is a local Mac user group in your area.

• Full service then no appeal abandoned service cannot connect to the Tower

  Posted to help others:

  I bought an iPhone 6 s it took 3 hours for Verizon connect my phone to my new Verizon account. The phone would display full service bars then, slide an or no service in bars. the phone was finally connected but may 2016 so far I sill experience the same problem of poor or no service call and dropped. Often the phone will not even scream or try to connect to the network.  Apple has replaced the phone 3 x but with no. change my service problems. Verizon and Apple senior level tech support spent to treat 30 + hours on the phone with me trying to solve this problem. We replaced the SIM cards without change. When I put the SIM card in my iPhone 6 it works fine. Full don't signal any calls interrupted and service when roaming. Back in the 6s and no service in the same place. Put the SIM card in the other Iphones not without problem.  If roaming is enabled, phone often it will not conbect to the tower at all. WiFi call is disabled and LTE voice data are on. I've disabled CDMA and data with little or no change with the problem. When iphone 6s loses the service and I toggle airport power phone it will display momentarily full service bars, then the bars one or not, while remaining connected to LTE. In some areas, I can receive calls but can not shout. Sometimes I can txt use data without showing on my plan as using FaceTime and can use the internet. The order indicated above of multiservices to no service happens within 10 seconds repeat throughout the day all areas companies Verizon towers and riaming towers. Verizon finally got the iPhone 6 s to work with full signal across remote I've ever had service, but continue to hamper the not being able to call in roaming. Shortly after that, the phone back to old habits after that they tried to solve the roaming problem.

  After 5 months of no stop calls to Verizon senior level tech supports on September 22, a high tech support tech senior level line finally came to the conclusion after 3 hours of troubleshooting determined it is a software problem Apple 100%. It determined that the phone for a month not was not connected totally to Verizon even if I used it. There to reset the SIM card and the network settings on the phone several times during this period to have the phone drop any connection after initial power that showed a full service then dropped the LTE then, he loses all the bars of service then shows no bar service then no service what so ever in 10 seconds. This was the problem with this phone on the first day.

  He explained that he has heard of what is happening and that Apple is currently working on a solution, but will not be out until possibly October 2016. He also said that this problen is happening now with new models Iphone 7.

  HE then stated that a specific sequence is usually not used must be used to reset the network settings by releasing the bug fix.

  How to restore your device

  1. First of all, back up your device using iTunes or iCloud so you don't lose any personal information.

  Note: If this is the first time that you have saved on iCloud, it may take time for several reasons (speed of Wi - Fi, amount of info on your device).

  2. Connect to iTunes to restore your device. 3. Choose "Set Up as new". 4. Make sure you that you connect to iCloud with your Apple ID so that only your contacts are re-added. Do not re - add photos, music or applications as they can be the source of your problem. 5. Set up your email. 6. Test for the next few days to determine if your problem has been resolved. 7. Restore your backup from iTunes or iCloud.

  Note: If you have a food problem, try to use the recovery mode.

  I hope this helps someone it is to have the same problems. I'm waiting to see if the bug fix works otherwise I'm going to an android phone. It has been too long a process without having a phone that works.

  I have the same problem - it has taken far too much time out of my weekend to try to resolve this problem. In addition, the Apple support person I spoke on the phone was very condescending.

  I've read elsewhere that change the LTE cell Options > Data Only will not solve the problem. So far, this seems to have worked for me.

• Mac Pro Tower 2012 Unresponsive (Power Light On, red LED turn on)

  Found my Mac Pro 2012 Tower responds more today with the power led and a red led light on the inside of the tower.  The subject of research and could not find anyone who had this exact question (unless I'm missing something) and I also have trouble understanding what LED light and how do I proceed.  Any advice would be greatly appreciated

  

  Remove all external and off devices, disconnect all external cables

  Check your GPU for dust/dirt/creep (where it "fits" of the socket), you can remove it but when undertaking this make sure that you are properly grounded at all times and the components are put in static free containers, then clean the inside of the computer with compressed air ensuring that you damage the connectors not blowing the white point.

  Replace the GPU and follow the instructions to reset the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

  See the yellow highlight

  

  Plug directly into a wall outlet connected to the ground not a power strip or battery backup.

  otherwise, to replace the CMOS battery on the logic board, after that leave the device unplugged for 30 minutes or more.

• Compatibility «?» (Mac Pro Tower / Firewire / climax together, etc..)

  I take Logic Pro 9, but after looking at all the improvements for Logic Pro X, I can't wait to get up to speed.

  I like the look of the improvements to the plug-in; logic adding distance (not available for LP9?); Drum Kit Designer, synthesizer, etc.

  When he (LP10) announced that there is a flagrant limitation I had with my current set-up but I don't remember what the hiccup was... perhaps there is none and I could be good-to-go.  Can anyone confirm if and where I'm looking at compatibility problems?

  System: Mac Pro Tower (mid-2010) 2.8 GHz Quad Core Intel Xenon

  OS: 10.10.5 (Yosemite)

  Interface: Climax together - Firewire

  If I remember, the question I met was first introduced with the announcement of Logic Pro X was he needed El Capitan - which did not offer the divers "Core Audio" / support, which means that overall height (Firewire) would be uncertain if even not work at all.  "" Looking at the "tech specs" on Logic Pro X, it supports OS X 10.10.  That looks promising (if it in fact the issue with El Capitan and the lack of support for Core Audio driver still exists).

  Can I run Logic Pro X to Yosemite?

  Can I run overall height (FireWire) in El Capitan without the Core Audio Driver issues / Firewire?

  Thanks in advance!

  I must add, additional hardware, I am running is a UAD PCI card in the tower.

• Is it possible to connect an external drive Thunderbolt 2 to a USB equipped MAC Tower?

  Is it possible to connect an external drive Thunderbolt 2 to a legacy equipped USB MAC Tower?

  No, currently the Thunderbolt must be integrated with the system board.

• On facebook I can't watch my friends with the name of Tracey I can using my phone app I can with Chrome etc but not on my PC Tower firfox

  On facebook I can't watch my friends with Tracey name I can use my phone app I can with Chrome etc but not using Firefox on my PC Tower

  Hello

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• 10-bit in Mac Pro Tower

  Has anyone found a graphics card that will work with a MacPro tower which will certainly be released 10-bit color to a 10-bit monitor?  Preferably a Nvidia card.

  Thank you
  Scott

  https://eShop.MacSales.com/item/Sapphire/100352MAC2/

  See also:

  How can I know what NVidia drivers are in el Capitan?

• can I access synchronize bookmarks of my laptop if my PC Tower is off

  I want to have the same bookmarks on my laptop and Tower pc, I can work on one when the other is off? Wil they be updated when I pass usage.
  Thank you

  Yes. You can just connect your two computers for synchronization, and no matter if it is off or on, as long as they both downloaded their data for synchronization of servers, you can access it regardless of what machines are turned off at the time.

• Firefox opens to a page divided into parts of towing, we're a little transparency on top and another is the largest part. No URL bar appears. Even I can not go to settings

  Its nothing showing towing but just divided part.

  You can also open Firefox SafeMode by holding the shift button down on the launch of Firefox . Might need to do this way if the toolbars UI isn't appearing.