Blue line or red vertical to the right of the screen

Hello, note that I'm a bit new to making videos, so my vocabulary may be a bit off. So when I edit and I'm at the end of a sequence and I want to put a little fade effect or a video black for a break, a thin blue or red vertical line appears to the right of the preview screen. I did some research and learned that it's something that was added in an update earlier to mark the end of a sequence. Is it possible to disable it, as it appears in the exported file? PremierePro red line.png!

8 the number.  As in 1920 / 8 = 240.  You want to make sure whatever dimensions you use are point remains divisible, not decimal.

Tags: Premiere

Similar Questions

  • my monitor displays properly, the blue and yellow lines horizontally and vertically on the screen

    monitor the display that is not right, when you move the slider it filled with blue, there are blue lines across screen

    Hello

    1 did you changes to the computer before the show?

    2. the make and model of the computer/monitor?

    Note: Make sure that the cables are connected properly to the screen and try replacing the monitor cable and/or monitor itself.

    Method 1:
    Resources for troubleshooting problems in Windows XP
    http://support.Microsoft.com/kb/307960

    Method 2: Uninstall and reinstall the display drivers and see if that helps.
    (a) click Start, right click on computer.
    (b) click on properties, click on Device Manager
    (c) expand the graphics card, right click on the map
    (d) click on uninstall
    (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

  • When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

    When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

    The standard specifies:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    -Restore factory settings/new iOS device.

    If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

  • The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925

    The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925. Sony India assistance team is subscript, but to change the Panel also did not help.

    Now the expensive game is with the service center for over a week and they refuse to return the whole and execution of R & D with no idea. In India, it is better not to go for the set bonus from Sony because they are not able to provide support.

    But people do you have any idea what is the cause?

    I'm sorry to hear what is happening with your TV. Only a technician can diagnose what's wrong with your TV. Unfortunately, we are unable to help customers outside the United States. I suggest that get you in touch with Sony India help on this issue.

  • Center a HorizontalFieldManager vertically on the screen

    Hello world

    I have a HorizontalFieldManager in a VerticalFieldManager. The HorizontalFieldManager contains a BitmapField in a 'cell' and a GridFieldManager customized in another cell.

    I'm trying to make sure the HorizontalFieldManager is centered vertically on the screen, but have been unable to do. Most of the forum posts say "create your own Manager. I can do it, but I'm not sure that the Manager must specify to vertically Center the HorizontalFieldManager.

    Someone can push me in the right direction? Here's what I have so far:

    imageOutputField = new BitmapField();
    href = new HrefField("Synopsis", 0xffffff, 0x043184, 0x00EF3825);
    href.setChangeListener(this);
    
    grid.add(href);
    
    VerticalFieldManager vfm = new VerticalFieldManager(
        Field.USE_ALL_WIDTH | Field.USE_ALL_HEIGHT
        | VerticalFieldManager.VERTICAL_SCROLL
        | VerticalFieldManager.VERTICAL_SCROLLBAR);
    
    horiz = new HorizontalFieldManager(DrawStyle.VCENTER);
    
    horiz.add(imageOutputField);
    horiz.add(grid);
    
    vfm.add(horiz);
    
    synchronized (UiApplication.getEventLock()) {
        add(horiz);
    }
    

    Thank you!

    Here's another way:

    http://supportforums.BlackBerry.com/T5/Java-development/vertical-center-a-field/m-p/254038

    Stef wrote:

    HorizontalFieldManager hfm = new HorizontalFieldManager();    
    
            LabelField testLabel1 = new LabelField( "Test Label1");
            LabelField testLabel2 = new LabelField( "Test Label2");
            hfm.add(testLabel1);
            hfm.add(testLabel2);
    
            int leftEmptySpace = (Display.getWidth() - hfm.getPreferredWidth()) / 2;
            int topEmptySpace = (Display.getHeight() - hfm.getPreferredHeight()) / 2;
            hfm.setMargin(topEmptySpace, 0, 0, leftEmptySpace);
    
            this.add(hfm);
    

    Worked perfectly. In my opinion it is better this way. You create what you want inside of a Manager, and then add the Manager and after that, do the math (with getPreferredWidth/height) and set the margins.

  • My iPhone 6s has lines of black border around the screen. Is this normal?

    My iPhone 6s has lines of black border around the screen. Is this normal?

    A screenshot would help us see what you see.

  • Satellite P105-S6114 - gray line vertically on the screen

    Hello

    I'm new to the forum so please excuse me if I look like a novice (because I am).
    I have a Toshiba P105-S6114 that suddenly developed a gray vertical line about 1 inch wide and about 3 inches from the right side of the screen. It seems that if it is washed out. You can not see on white screens but is very sensitive to all other colors. It appears when you start the laptop to search on the net, I think while it is on the screen. What is the screen? or something escapes me?

    Please correct me for false assumptions in my post.

    I started pricing new screens. Locally for installing I got a quote of less than $500.00. I saw on ebay (new) about $280.00 aus replacement screens. Installation I expect about $100.00. If someone knows a cheaper solution, I would be very happy to hear it.

    I saw a screen for a P105-s6062 that appears from the PDF file to be identical to the S6114. It is second hand, but sounds like a viable option. Does anyone know if the screens are identical, including the connections?

    Someone at - it any other suggestions? I'd be happy to hear from someone as the laptop itself is large and I don't really want to get rid of it.

    > It appears when starting the laptop to search on the net, I think while it is on the screen. What is the screen? or something escapes me?
    It might be the screen of laptops, but it could also be a malfunction of the graphics card.
    If you first need to know what's exactly wrong.

    In your case, I recommend you to connect a second external monitor to the laptop.
    Then check if the same vertical lines appears also on external monitor.

    If the same could not be visible on the other display, the chances are high that a graphics card is malfunctioning.

    In this case a replacement of the motherboard would be necessary and this would be a costly affair!

    Anyway, in both cases, I would recommend contacting the ASP in your country.

    Good bye

  • Satellite P100-286 - vertical on the screen restart and constant lines

    I got this P100-286 with Nvidia Geforce Go 7900 GS and recently the laptop started to freeze options even with vertical lines on the screen tried recovery cd tried to re - install and after installation, that he started to do the same. I have read similar problems in the forum and this is a common problem with Toshiba? I have spend £1500 on this and it is only 3 years old. My friends have older laptops of this almost 6 years old and in good working condition.
    Y at - it a suggestion for this problem or a solution? The heat on the basis of the laptop is really hot and it's like that for centuries.

    Any help is really appreciated after spending so much like to last longer or it is a problem of reliability with the Toshiba brand.

    Hi vns.

    Hmm strange. I have ever read on these issues here in the forum with Satellite P100. Friend of me has the same model and it s still does work correctly, no problems at all.

    Do you have the same vertical lines on a screen? If so, it is certainly associated with the internal graphics card and not watch.
    By the way: you have the same problem in the BIOS or just Windows?

    With regard to the heat on the underside: I think that it s time to clean it and remove dust. You can do this using the jet of compressed air to blow the dust from the cooling fans. That's why it of not necessary to disassemble your laptop.

  • my screen has fallen to 90 degrees. It is now horizontal instead of vertical on the screen,

    I need to know how to flip the screen my back to a normal vertical view... portrait? landscape? Help me!

    I need to know how to flip the screen my back to a normal vertical view... portrait? landscape? Help me!

    Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

    If this does not work: right click on the empty desk > graphics > Rotation.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite L650-14F - lines and streaks appear on the screen

    I have a toshiba Satellite L650-14F PSK1LE, bought from a reseller of Romania last week and I have big problems with the video, I guess.
    The scree Somethime closes and appears a few scratches on the screen and I can't use any command.
    The blocking of the laptop. The only thing I can do is to close the laptop and re-open.
    The display driver is installed. What is the problem?

    PS: Sorry for my language and we hope you understand

    Hello

    There are some common steps that should be made on the one hand;
    -test new graphics driver
    -updated the BIOS to the latest version
    -recover the laptop to factory settings

    If the lines are still visible, you must connect an external display.
    If the lines would be visible also on the external monitor, the graphics card can be affected.

    In this case, the part needs to be replaced.
    But this is a job for a technician in ASP.

  • P7-1298cb: Multi-color flickering lines in columns displayed on the screen after upgrade Windows 10.

    I upgraded Windows Windows 8.1 1O.  I've updated the drivers.  The monitor multicolored poster of fine lines in columns.  The lines of twinkle randomly.  The monitor is a diagonal LED of 2711 x 27 inch HP (XP600A) screen.  It is not that there is a specific monitor for Windows 10 driver.  Any suggestions on how to fix this?

    HI @TLL2016,

    Thanks for getting back to me.

    There is no update BIOS, but there is more recent graphics driver.

    Here is a link the download AMD UMA Graphics Driver.

    Just to check the monitor, here is a document for display quality problems.

    Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

  • M40-237: small lines up and down on the screen

    I installed DirectX 9 c Feb 2006.
    When I am playing a game, in the center of the screen there is little horiz. lines from top to bottom.
    How can I solve this problem?

    Thanxs.

    Hello

    Before trying to solve it, you need to know why this happen. As far as I know, this camera comes with DirectX V9.0C. Have you had this problem before the last installation of DirectX?

    Are these lines just at the time when you start the game or all the time?

  • Pixelated, yellow and red stripes on the screen

    So here's the deal.

    When I drag a clip in a timeline, it seems fine.

    When I play the video seems normal, like this.

    Screen Shot 2015-10-23 at 7.56.03 PM.png

    But when I stop (pause) the video, the screen turns to this:

    Screen Shot 2015-10-23 at 7.56.09 PM.png

    It's exactly the same when I export the video.

    Screen Shot 2015-10-23 at 8.00.07 PM.png

    The only way that I'm NOT to look like it is when I change the zoom to 100% level

    Screen Shot 2015-10-23 at 7.54.49 PM.png

    But it still all wobbly still exports.

    I edited a bunch of different projects with a bunch of codecs in the past. This problem just started magically appearing recently.

    This problem happened with three different file formats and settings of sequence is not only these images.

    Any help would be appreciated!

    Here are a few screenshots more of my setup.

    Screen Shot 2015-10-23 at 7.58.10 PM.pngScreen Shot 2015-10-23 at 7.58.53 PM.png

    (yawn)

    If you had searched or read through the forum here at all, there has only been what, a hundred or more of the same? in the last two weeks. If it seems to you that this could well be the same period of time as more recent trash-OS of Mac, El Capitan, was released... gee... you wouldn't be fair!

    So complain to Apple, since this OS hit other programs and companies too.

    Then... Project settings... Mercury Playback... to choose only the software (stop down your graphics card, sorry...)

    Select Remove previews in the box below...

    And seek to El Capitan questions here. And make sure you are on the last patch of OS...

    Neil

  • Satellite M30: colored lines running vertically on the screen

    Hello

    Ive had a problem with the display on my satellite M30. I can start in fine etc windows but colorful lines going up and down my screen, as well as the general artifacts. I cant even install drivers nvidia without a blue screen.

    The strange thing is that if I apply pressure to the left side of my touchpad, I install the drivers and all is well! Release the pressure and the computer crashes. Ive opened the laptop and can't find anything that could be the cause.

    Any idea here?

    Maki43

    Hello

    You can check if the problem is related to the LCD or the graphics card.
    Try to connect the external monitor and check if the lines appear on the second screen.
    If the lines appear not the graphics card should be ok.

    Have you tried to install the graphics driver on the Nvidia site? These drivers are not designed for use on the Toshiba laptop. You must use own graphics drivers of Toshiba, because drivers support a protection against overheating.
    If the temperature rises to highest, the Toshiba drivers critical level will be decrease the performance of the graphics card.
    Other graphics drivers don t support that such function and, therefore, the graphics chip can overheat!

    In any case, I think that also the technician must check the laptop

  • Satellite M30-853 - vertical white lines or black spots on the screen

    Hello

    I have a laptop Toshiba Satellite M30 - 853 during nearly four years. A few days already, I'm having a problem that they come from the white lines vertical or black spots or screen is smear when I am trying to move a window from time to time. My wireless adapter is in use.

    The vicinity of processor, video card and wireless network card are very hot. My cooling fan is starting and stopping, but I'm not sure of its effectiveness.

    I disassembled the laptop to clean it if there is little to dust, but I found it in very good condition. Anyway, the problem persists and I am looking for decision. Someone told me that probably that's because of the defective video card memory. It's strange to me because the problem is not permanent it is often and if I try to cool the surface it disappears.

    I'd appreciate any suggestions.

    In my opinion, these issues must be verified correctly. This can be done using different diagnostic tools. It is important to know what the problem cases.
    Of course, it has something to do with the temperature of material and graphics card. Sorry but I'm really skeptical, you can do something alone. Maybe you should seek professional help.

Maybe you are looking for

  • USB ports, CD/DVD player, and Mike just does not work

    So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open).

  • Why my battery not charging?

    I have a laptop Dell Inspiron 1525. I just bought a new battery a few weeks ago and for some reason any it will not load. Even if my laptop is off it still doesn't load.  Y at - it a setting I need to change on my lap top?

  • How can I get back story I didn't save and can't come back?

    Help, please!I use Photoshop CS6 to paint all my animals and someone who uses CS6 too and knows about it would be great!I worked on this piece even for aaages, and I finally got to the point of having to just add whiskers to her face that's literally

  • The list of values with contains criteria

    HelloI use Jdev 11.1.2.0.I created a template driven Input text with a list of values and display the page and works very well. (List of values to an attribute in a VO and display of this attribute as LOV)My requirement here, is when the user enter s

  • You can only amplify the noise above a certain threshold?

    I am trying to raise the floor of a topic that I interviewed in a video clip at an event where people are wandering around in the background. A simple amplification could raise his speech, but also the level of background noise. Is there a way to amp