Blue screen, lines on the screen on the start screen

Similar Questions

• Blue vertical line on the screen of the Qosmio G20

  A few minutes ago, I was surfing the web and from nowhere share an apperead to the blue vertical line on the screen.
  A blue vertical line near the middle of the screen and crosses the screen all the up toward the bottom.

  If I'm looking at a white background, the line is undetectable, but if it is colored, it comes right thru.

  Please don't tell me they are dead... hoooo pixels... I am now, life away from any toshiba repair shop and I get a guarantee...
  I think that I bought 3 years ago. Need urgent help

  Hey Susana

  I wouldn't say it s a lack of dead pixel, but to me, it looks like a more serious problem.
  It looks like a malfunction of the graphics card. But to be sure, you should try to connect the external monitor to the computer and check if the same vertical line will appear on the second screen.

  If you're going to see the same line on the external monitor, then I assume that the question of the vertical blue line might be linked to the GPU fault.
  This could be the case value because the chip graphic card cannot be replaced. You need to replace the whole motherboard :(

  So, as you see it s not easy to solve this problem and I really recommend to contact a technician who has more experience with these laptop problems.

  Good luck

• Blue vertical line on the screen

  Hello

  After a day of use, I have a blue vertical line on the screen. Defective LCD screen? Tried to reapply the latest firmware, but that doesn't change anything. Other things to try before a sent an RMA?

  

  I dunno if Newegg "corresponds to" Amazon product replacement policy is defective products: Amazon will cover the shipping costs for the return (via a pre-paid return label he sends you) but also send a replacement free of charge.  You might want to check with Newegg, if your Clip has been purchased recently.

  Apart from Newegg, if you need to take advantage of the SanDisk warranty directly with her, SanDisk (at least in the United States) covers shipping as well as for the replacement that is sent back.

  http://www.SanDisk.com/about-SanDisk/contact-us?utm_source=contactus&utm_medium=hyperlink&utm_campai...

• little blue horizontal lines on the doc, I've done the nozzel check and head cleaning.

  All of a sudden one day when I print there are some blue horizontal lines on the doc, I've done the nozzel check and head cleaning. I have a 810

  Hello

  ·          What version of the operating system is running on your computer?

  Step 1: Check if the problem occurs on a test print.

  http://Windows.Microsoft.com/en-us/Windows7/print-a-test-page

• Photoshop CC 2015 is a line connecting the start and end of the brush strokes

  Hi guys,.

  I had a strange problem with a certain brush (size 5px, difficult tour, no shape dynamics, no transfer) in Photoshop CC 2015.1.2.

  It only happens when the drawing very fast on my Cintiq 22HD.

  The problem is PS is a line connecting the start and end of the brush strokes. I don't hold in shift or whatever it is.

  

  Here's my brush settings:
  

  I use a PC with these specs:

  Intel Core i7 - 4790 K 4.00 GHz

  ASUS motherboard

  NVIDIA GeForce GTX 970 (10.18.13.5354 driver version)

  16 GB OF RAM

  Cintiq 22HD

  Win 10
  

  Is it a question of PS or Cintiq?

  Thanks for help.

  OK, here is therefore an update.

  The problem is not at all with Photoshop or Cintiq, with Windows 10 parameters of the stylus.

  Fortunately, there is a small piece of free software that you can download called "Fix my pen" (by Smith Reddy) which defines the features of Windows Tablet PC in the registry for you (essentially by disabling everything related to it):

  viziblr - News - difficulty my pen makes your Wacom tablet JUST WORK on Windows 7

  It works fine on Win10 too.

  Now, as my original problem with Photoshop to do a line connecting the start and end of the brush strokes left, however I have another question more small that came after running difficulty my pen. The lines that I draw now are not smoothed by a software more. You can see the difference below.

  

  Fix My Pen sets a lot of things in the registry, but you cannot individually control which setting is disabled. So I guess that one of them is the cause.

  

  I expect response from Smith about it, cause I have no idea who he is.

• Touch force constantly removes the gesture and replaces it with a straight line from the starting point to point stylus. Is this a bug? It made impossible delicate designs on iPhone 6 s more.

  More iPhone 6s and Adobe Illustrator drawing

  When establishing, too much pressure removes the gesture and replaces it by a straight line connecting the initial start of the drawing just under the pressure point. This makes delicate drawing impossible. This affects all types of brushes and occurs when you use your finger or the stylus. Deleting the app, reboot the iPhone and reinstalling does not remedy the problem.

  As long as we don't have contact with the screen and varies the pressure beyond a certain point, the gesture will be constantly removed and replaced by a straight line. This issue was present in the previous version, and in the course of December 3 update.

  Carlos,

  Thank you for reporting this issue. We have a fix for this issue will be released soon. Are you interested in helping us test the fix?

  If so, please join the preliminary program of the draw the fate by filling out this short questionnaire.

  https://www.SurveyMonkey.com/r/FTDMDX3

  Sorry for the inconvenience.

  -Draw Will, product manager, Adobe

• Always get the blue spinning wheel at the start of the creative cloud

  I use Win 7 and have had no problem until today.  Creative cloud would not initialize.  I went through all the steps of: Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  I did it several times and even after the removal of the OOBE and do a fresh install, I always get the same result.  Blue spinning wheel.  The only thing I can think is that I have to update to adobe reader before that happens.  I uninstalled drive and I actually uninstalled all applications in cloud and same result.

  Please let know us what to try next

  Carl S

  Hello

  Please try following steps depending on your operating system

  (MAC)

  (1) close adobe every process in activity monitor (creative cloud, sync Core, CC library, services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate click finder, and then in the menu goto bar... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

• Equium A60-157: lines on the start screen

  Hi, I have a problem with my Equium A60-157.
  When the machine starts and get you the LOGO LOGO & P4 TOSHIBA lines running down the screen there is a fault or a common thing with Toshiba?

  Thank you

  Hello

  I don t think that these lines are a common thing on Toshiba laptops.
  This problem occurs after full load of Windows?
  Have you seen these lines on other applications?

• HP 2600n prints with a blue vertical line on the sides

  There is a powder blue line appearing on my paper when I print. This vertical line appears on the left side of all my papers. I opened the front to find coverage that revolves around the rollers had what looked like to dry ink on this subject. I wiped it out and for one or two pages no. or very weak lines appeared. They are back.

  Help!

  Hi ellettrhi,

  ·         Since when are you facing this problem?

  ·         Remember to make changes?

  It looks like a hardware issue to me. However, try the following.

  You can view the following HP help guide and see if it helps.

  Print the HP Color LaserJet 2600n printer

  See also:

  Solve a HP Color LaserJet 2600n printer problem

  For more help, you can contact HP.

• My MBP boot with two horizontal lines at the start

  Hello

  I have a Macbook Pro (15 "mid 2015).

  2.5 GHz Intel Core i7

  OS X El Capitan

  (1) my MBP boot with two horizontal lines on a black screen after the apple logo.

  (2) sometimes the screen suddenly became all glitch on the dry mouse 5-7 (2 - 3 times a day) the cursor moves and CPU rises from 4% to 13%

  

  What I did, reset the SMC, check mac by TechTool 8 - is shows OK.

  Please help, what happens? Someone at - it experience of something similar?

  Thanks for any help,

  Ivan

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  Ciao.

• Why am I a thin blue vertical line on screen?

  Why am I a thin blue vertical line on the screen of my PrecisionM4800

  .? Is there problem with Video card?

  Hello Karthi.SK44,

  Thanks for writing on the Dell Community Forum.

  I suggest you to test the display on the external monitor to confirm if the screen is bad on external monitor while the motherboard is faulty.

  Then run LCD BIST (built-in self-test) on the system to shut down the system, then press and hold the power button. Then put on the system where, in solid colors will be visible on the system. If the line is visible during the test, then the screen is defective.

  If these two tests pass and then make sure that the system ins safe mode with network to eliminate the operating system.

  I hope this helps. If there are questions more respond to this message.

  Nice day!

  Sincere greetings,

• Blue vertical line appear on the screen of the series M Satellite

  I had a blue vertical line appear on my screen its about inch thick and is at - it start, can someone tell me if I can get rid of him? Thank you.

  Hello

  If this blue line is present from the first second after turning on the laptop that I presume it's because of the faulty graphics card. To be sure try to connect an external display to see the same thing will happen. If Yes, it is the evidence that this line occurs due to faulty hardware.

• Qosmio G30 - lines on the bottom of screen and blue

  Hello

  I m a lot of problem with this laptop...
  Having bought some time ago it s summer works well, but out of the blue it s given me...
  I switch on the laptop, and when the Qosmio logo picks up his all with lines inside and rather than the background is black it is blue... after that funny of characters begin to appear on the screen and the Windows Xp logo appears then a blur a blue screen comes up with an error it blinks fast if you can not read and the laptop restarts...

  I tried to reformat, but the same problem occurs. Help!

  see you soon

  You are using Windows XP?
  Fact the same question is displayed using the OS preinstalled Toshiba?

  Check this box!

• Boarder line divides the screen in resolution 800 x 600 permanently. After SCREEN (bad_pool_caller) BLUE

  PC fell and landed with only the base of the screen. about 10 minutes later, it displays a BLUE SCREEN (bad_pool_caller). After the compilation of the dump file, it is restarted with a line thick boarder that divides the LCD display into 2 halves. both does not appear as one (whole) but individually displayed in 800 X 600 resolution. The way I see it is not for lack of material, because the line is typically straight (no curve, no rough edges) and it does look like INK, as its dissemination even not nor intend to broadcast when the touch screen.

  The border line is horizontal 1.5 cm thick and startup displays (i.e. when the system boots, the line is there also). I discovered that my auto pilot intel display install another software to monitor who is digital flat screen 800 x 600. and option to increase/decrease the resolution as being disabled as a result (only 800 x 600 seems can't be changed) focused on the development of display drivers who have no effect on the boarder line as the remains of 800 x 600 it. now, I would deliver the windows pc 10 back to windows 7 drive c. remains of the border formatting line.

  Lately I have to check the registry values on the display and video and can notice that my values seems different from the default value of the other PC.

  Questions: Blue error screen can change the values of registry permanently? I formatted only C (leaving the D drive as its my backup) this means that the registry values can always stay the same even the old window?

  ##I do not have the .dmp file more #.

  Screen material, has been replaced. Corrected automatic resolution screen. Updated to OS Windows 10. Problem solved of the screen.

  I thank you all.

• After installing lightroom cc, the photos show ok in library. When sent to develop module there is a blue screen with 2 white diagonal lines on pic. How is it removed?

  After installing lightroom cc, the photos show ok in library, but when the peak is selected and implemented development module, there is a blue screen with 2 diagonal lines white covering the picture. half of the photo will show when I put side by side feature on. How can I remove this blue screen.

  Edit/Preferences/Performance and uncheck "use graphics processor.