Equium A60-157: lines on the start screen

Similar Questions

• Equium A60-692 - cannot open the start menu and keyboard problem

  I have a problem starting my laptop A60-692 and I'm not near the points of service.

  When I push the power button the screen goes through its startup routine gives her marching band welcome charge to the top of my desk.
  But when I click on the start only the start window flashes for a split sec and remains standing. If I press the windows key on the keyboard I can then click on the start and the start window appears on the screen.

  However if I open a program like note book or internet explorer, the keyboard will not and only gives a Bell sound when I use the keyboard. If I click Start, then shut down and click on restart the laptop turns off and then restart everything works fine!

  It's very boring and tedious. I'struggled with this for a long time, although it was not like that when new.
  Everyone had the same problem or have any advice to give?
  I would be very grateful!

  Concerning

  Andrew

  Hello

  Believe me it is not easy to say what the problem is here.
  I would like to know where the mouse you are using. Use you touch pad s notebook or external mouse?
  If you use the s key to laptop please disable it with FN + F9 and test with an external mouse only.

  What about the response of the keyboard? You can also try to test with external keyboard only. Only in this way you can see if this issue has something to do with the internal keyboard.
  Please do some testing to see if this issues can be related to defective portable equipment.

• Equium A60-157 - what is the maximum memory capacity?

  I want to improve my memory to 2 GB, this laptop may be able to this ability on the location of a?

  Hello

  The laptop only has one slot for memory upgrade memory, and this slot is capable of memory module 1 GB only. So, you can replace the existing module with 1 GB module only.

• Equium A60-157 (PSA67E) - need recovery disk and AC adapter

  Can Hi anyone help me please? I get an old work Equium A60-157, sorted to the backlight inverter but I would like to get a drive recovery if possible because it can have several system files on this subject I found on this site.

  Certainly wants power! must get a more powerful adapter, as it is creaming my 4. 5 diet sometimes, but seems to be a good laptop.

  Thank you very much David

  Hello

  > to get an if possible recovery disk

  Click here for [recovery disk | https://backupmedia.toshiba.eu/landing.aspx] if it is available to order

• Could not find the update of BIOS for Equium A60-157

  Hi, I hope someone here can help me, I'm looking for the update of the BIOS for an EQuium A60-157, can't find it on the page of the Toshiba BIOS update.

  Thanks in advance

  I ve checked the Toshiba support page under http://eu.computers.toshiba-europe.com and I found 1, 90-VICTORY update of the BIOS for your computer satellite phone.
  I don't know why you can't find but please, under product type choose ARCHIVE.
  You will find.

  Good bye

• My iPhone accedentely fall after I start to be verticall line on the color screen how can fix this

  My iPhone accedentely fall after I start to be verticall line on the color screen how can fix this

  You will need to have the device examined by an Apple store or Apple authorized service provider.  He may ask you to replace your device.

• How to increase the number of lines of the App on the start screen

   I use the Lenovo Yoga powered by Windows 8 RT. When I turn on my computer and it goes to the start screen, 3 rows of Apps are displayed. However, every now and then, for some reason, it displays 4 rows of Apps. I usually adjust my Apps to suit line 4 because I prefer that display but, it always changes back to 3 ranks.   
  I am sure I have the correct screen resolution and my computer sleeps 4 rows of apps on the home screen, but I'm just not how to do it. I have 4 rows Apps displayed permanently and not only sometimes by chance. I would really appreciate if someone could give me a step by step on how to do. Thank you.

  This Friday, October 18, free to 8.1 Windows Update will be downloaded to your computer and your splash screen settings can be adjusted to display more lines.

• Black horizontal lines on the LCD screen at a specific time during the start and stop

  Hi, I am currently using a Presario CQ61 Notebook PC.  My problem, as indicated in the title, are black lines on the LCD screen, apparently when the screen is reset or enclose itself turned off during the start and stop only. From the judgment, he produced a split second her stops the hard drive, after that the screen is black. The lines and then quickly disappear. At startup, lines appear after the Windows logo has passed and the screen went from black to start loading the login screen.

  The LCD is in perfect condition, all using the PC. No line, no discoloration, etc.. Nothing extraordinary either. The problem does occur only during these two periods, specifically. I am also unable to note the lines when I'm looking directly at the screen. I have to be standing next to the PC, at an angle.

  Now, I had this PC for a considerable amount of time, however, I never paid much attention to the screen when starting upwards or stop, so this could definitely be something that the laptop has done since I bought it. I also read on similar problems, and it could be an outdated video driver or BIOS.

  I want to just make sure that it is not a major problem. Thank you all!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  1) click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. Under the Services tab, click to select the hide all Microsoft services check box, and then go to tap Start , click on disable all. Click apply OK restart the device.

  (2) please visit the HP website and update the Bios and graphics drivers on the unit.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Accidental renaming of Recycle Bin Equium A60 - 157 Win XP SP2

  Accidental renaming of the Recycle Bin to "54443434...". by a quick fingers grandson with momentary access to the keyboard.

  How can I go back to correct title.

  The trash is still working OK. It's just the logo of office that has this digital title and I can't get the

  Instruction "Rename" in the drop down menu the menu highlighted so that I can use it.

  The machine is an Equium A60 - 157 running Windows XP SP2

  Hello

  I've found this workaround short:

  1. start the registry (type regedit in RUN)
  2 open the HKEY_CLASSES_ROOT folder
  3. open the CLSID folder
  4 open the {645FF040-5081-101B-9F08-00AA002F954E} folder
  5 open the ShellFolder folder
  6. change the data value of 'Attributes' of the ' 40 01 00 20 "to"50 01 00 20".". "
  7. change the DWORD "CallForAttributes" at "0x00000000" (double click and change value data to 0).
  After this procedure, the option rename must appear in the drop-down menu when you right click on the Recycle Bin icon.

  Good bye

• Equium A60 - 157 HELP Card/PCMCIA wireless network!

  Hi all!

  This problem has been frustrating me for at least 2 months.

  OK, I recently bought a Belkin Wireless G Notebook Card (wifi card).
  The first time I installed the wifi card it worked perfectly. I powered
  extinguish your laptop (after I had finished working on it). The next day
  When I turned the laptop on, you guessed it, the wifi card was not
  work. I did not remove the wifi card for the power off/power on stage.

  When I went into Device Manager, a yellow exclamation point was
  above the wifi card. When I looked at the properties of wifi cards, I found the
  following message appears:

  This device cannot find enough free resources that it can use. (Code 12)
  If you want to use this device, you will need to disable one of the other devices on this system.
  Click Troubleshoot to start the troubleshooter for this device.

  I tried unistalling and reinstalling the wifi card. I tried to use the latest Belkin drivers for the wifi card. Sometimes it works, but when I have the power turned off/turned on the laptop it s not go.

  One of the ways I got the card to operate was removing and inserting the card several times
  until he finds resources and finally worked. I put t use this method as, obviously, I might damage the cardbus slot and the card. In the meantime I ve been using a Belkin Wireless G USB network adapter. I had no problems with the USB adapter, but I prefer to use the wifi card. This is because the majority of the wifi card is housed inside the laptop, so it s not easily evicted. The USB adapter is great for wireless networks inside, but too risky for roaming outside.

  I had this problem of 1.70 at 1.8 ° C bios version, and I still have it with revision 1.90. I intend to return m wifi card in the store for an Exchange, but I have a really bad feeling that the same thing will happen with the replacement of the card. I m not convinced that the current wifi card is defective, because it works perfectly when he gets the resources.

  I tried to manually configure resources on the devices, but I have a major problem. Windows seems to be LOCKED in the automatic settings. The automatic settings check box is grayed out completely, it is impossible for me clear the checkbox. I did not take anything in the bios that can help me solve this problem.

  I noticed that there are many devices running off IRQ (interrupt requests) 19, when you view resources by type in Device Manager. These devices are:

  Standard enhanced PCI to USB Host Controller
  USB host controller standard OpenHCD x 2 (two entries)
  Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  Controller CardBus Texas Instrumetns PCI-1410

  When the wireless card works she also runs IRQ 19, but as I said before Windows is locked in the automatic settings and do not manually configure the hardware resources.

  Equium A60-157 is not provided on board, but it has the potential for. WiFi L.e.d. on the front panel, physical location for wifi turn on side panel wireless icon and F8. Someone know if Toshiba offer an upgrade service, or can I install wifi on board myself?

  ANYONE, PLEASE HELP ME WITH THESE QUESTIONS!
  Thanks for your time!

  Hello

  I found this for you:

  Both devices have received a same ports of entry/exit (e/s), the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller does not get a break in the BIOS because of a damaged MPS (Multiprocessor) system table).
  You can use Device Manager to determine where the conflict is and turn off the device in conflict. On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.
  Try disabling the features of conflict. It will be interesting to know if the problem will occur again.

  In my opinion, you should contact the Service partner and ask them if the unit is ready for the Wi - Fi module. Sorry, but I'm not sure about that and I don't want to give you a bad information about it.

• Drive recovery for Equium A60-157 PSA67E

  Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

  I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

  I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

  So can you help me please...

  David

  Hello

  Why you n t install a new Windows OS on this laptop?
  Missing drivers can be downloaded from the page of European driver of Toshiba.
  All drivers are available!

  The recovery disc can be ordered for this model of laptop because it s too old.
  Clean install OS Win + drivers is therefore the only option

• Equium A60-157, problem after update BIOS 1.90

  Hi all!

  I've had my Toshiba Equium A60-157 for two months. I've updated the my bios twice. First of 1.70 to 1.8 C and from 1.8 to the current 1.90 (common at the time I made this post).

  I noticed that as soon as I used my recovery DVDs to restore the laptop to the default constructor, I had a problem with the main user account that is normally created after the completion of the recovery strategy.

  Whenever Windows would open a session after the recovery account generated, a popup would display a message similar to the following:

  "Windows can not load the profile and connects you with a temporary profile." No changes will be saved. "

  He also said that this problem was maybe due to incorrect permissions, or something like that. The pop-up window also contained a 30-second countdown before opening in windows with the temporary profile. As indicated by the pop-message no changes would be recorded. I could even change my user account image.

  I ran it again the DVD of recovery only to get the same problem. This NEVER happened when I ran on the original bios 1.70, bios recovery DVD AND 1.8 c.

  Anyway I came up with a solution to this problem, which only caused me no problem at the present time.

  I just logged into Windows mode without failure, entered the account administrator, created a new account and deleted the account of departure (created at the end of the recovery program).

  So far, the user account-wise, everything back to normal.

  If the recovery strategy or the bios did not cause this problem, I would be grateful if someone could give me some possibilities of doing just that.

  I don't want to get updates of bios from 5-10 down the road, only to find out that my recovery DVD does not work.

  Fact the DVD should be updated as well as the recovery bios?

  Thanks for your time.

  Hi, Conrad

  Can you please tell me why you do the updates to the BIOS? Have you had any problems? I use my unit for close to two years and I didn t make any BIOS update so far. If everything works well, it is not necessary to do an update with the exception of some Microsoft updates that make the OS more secure. Don t do any update if it is not necessary.

  In any case, I am very confused with your question. Normally, Recovery DVD should not be updated. The BIOS updates are useful if there is a hardware conflict or a problem and not a problem using the operating system or any software.

  It will be interesting to know why you're doing the recovery procedure each time after BIOS update.

• What mini PCI WLAN card can be used on Equium A60 - 157?

  Hi, im trying to buy a wireless mini LAN card pci for my toshiba Equium A60-157... do not know what an I need or I can use? Thanks Carl

  Hi Carl

  According to the specs of your device is not ready WLAN. This means that you can not switch on the unit with the mini PCI WLAN card. Only solution is the card PCMCIA or USB WLAN stick.

• Equium A60-157: Question about maximum size of HARD drive

  Hello

  Looking to upgrade my Pentium 4 3.06GHz Equium A60-157 a bit then got a new module of 1024 MB of RAM, but now really to upgrade my 40 gb HDD to go with. I found all the specifications of the type of HARD drive, I need, but may not know what the maximum size of the disk, it is that the BIOS will recognize. I don't think that I've never updated by the BIOS and I'm looking to get a 120 GB drive. Any ideas please?

  Thanks for your help!

  Hi Alex,

  Most portable smanufactured in the last 5 years or so are able to accept larger hard drive capacity without problem. I am currently using a 80 GB drive in an old SA30 of three years. I can't guarantee a 120 GB drive will work, but I see no reason why it wouldn't.

  Kind regards

• Equium A60-157 - PCMCIA or USB WLan adapter

  I have an Equium A60-157 and you want to add a wireless adapter.
  Can someone advise me on a PCMCIA or USB adapter suitable for this model.

  VIN.

  It s indifferent if you buy a card PCMICA WLAN or WLAN USB stick.
  My opinion would be a USB key, because you can use it on a PC too.

  I put t have much experience with these WLAN sticks but I would buy one from the manufacturing of your router. For example, I have a router of AVM and a stick of AVM WLAN.
  So you can be sure that s has no problems because you have from different manufacturers.

  I hope I could help a bit.