Blue screen (more of a gel to a blue screen) BCCode124

Similar Questions

• iPhone 6 more hang freeze issues

  My iPhone 6 more guard suspended (gel) for the past 6 months, I have to reset the whole phone sometimes up to 2 times just to get it to work again. Been a loyal (including my entire family) custome since gen 1 iPhone, iPad, mac book. Am really disappointed with the quality now. Did not bring to the service center since the first day of the problem because I thought that was just a few bugs & was sure that apple will fix it, but after many update of iOS so far, the pesisit still problem.

  iPhone is more quality I've known, hope apple can fix this problem before finally losing the most loyal customers

  Hello BennyFoo,

  Thank you for bringing your iPhone freeze questions here for Apple Support communities. I understand how it is important to have a reliable phone. I'm happy to check this with you.

  The first thing we want to make sure that all of your data on your device is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. If you are still having issues, try force reset then. It is designed to be used when the iPhone does not respond, and it looks to be the exact symptoms that you are experiencing right now.

  If you still experience the same problems after reboot, please try to restore your device from a backup by using this article help: restore your iPhone, iPad or iPod touch from a backup. If you don't have a current backup, please try this help article: If you can not update or restore your iPhone, iPad, or iPod touch. Please pay close attention when you get to step 4 who said "when you see the option restore or put to update, choose update. iTunes will try to reinstall iOS without erasing your data. "to get your iOS reinstalled. Test if the issue is still ongoing.

  Thanks again and have a great rest of your day.

• MBP frequently freezes / crashes on wake

  I have a MBP 2012 Middle I got in 2013 and have had problems with since day 1. I narrowed down it to / Standby failure (details below), but I have no idea how fix or solve this. Any help would be appreciated. I apologize if I have provided too much information, didn't waste time everyone, asking for things that I should have mentioned!

  H/w: MBP with 8 GB of RAM, USB hub with Mac keyboard, external HD (usually disabled), Time machine (usually disabled) disk and load cables for 2 iPhones attached. Apple bluetooth mouse. Sometimes I plug devices directly in the USB ports (instead of the hub).

  History:

  I take the computer to the Apple store 9 times since I got it. The second or third time (which was a few days after I got it) they replaced with a brand new, however that has not fixed the problem. They have made of the material tests and tests on it for the night and find nothing wrong with the hardware, which leads me to believe it's a software problem. The software that I use most often is Dropbox, Chrome, Coda 2 and Pathfinder, with various other things like Word and Excel from time to time.

  Symptoms:

  Here are some of the problems I had, which seem to occur in wake or shortly after waking from sleep

  • USB ports do not work (frequently - sometimes set by putting the computer to sleep, usually can only be fixed by rebooting)
  • Screen freezes on wake (infrequent - sleep sometimes allows the screen to work again for a minute, then it freezes once again)
  • Slow to wake up (quite frequent - may last from 30 seconds to 2 minutes to wake up once opened)
  • Hangs on the sleep/wake (rare - when open or closed nothing happens, and then after restarting the system about 30 seconds)
  • Various other (all text files have been read that after the awakening, trackpad, listed as "not connected" after waking up, lost the ability to make windows to the front, the points will not force exit, reboot has not etc..)

  Troubleshooting:

  I did a lot of reading on this and that you have not found a good solution. Here are a few things I tried

  • Reinstall OS X (I did probably 6 times since I got the computer, it doesn't seem to help)
  • Repair disk permissions.
  • Updated to OS X (I think I initially was Mountain Lion, now have el Capitan and the problems have persisted through all versions)
  • Reset the PRAM/CMS (I think that PRAM may be an old term, but I've tried both anyway)
  • Antivirus deleted and a few other programs I didn't need more

  Accidents/gels don't happen all the time (last was 2/18), but they are often enough to be annoying. For the last one, I saw it in the newspaper. I think he can relate to Google Sync, which I've since turned it off. I have not had another accident since then, but it's only 4 days.

  [syslog - edited]

  18 Feb 08:04:30 FinderSyncExt MacBook Pro [5437]: failed assertion: 15 d 21: libxpc.dylib + 35399 [61AB4610-9304-354C-9E9B-D57198AE9866]: 0 x 13

  18 Feb 08:04:32 - last message repeated 72 times-

  18 Feb 08:04:32 MacBook - Pro FinderSyncExt [419]: failed assertion: 15 d 21: libxpc.dylib + 35399 [61AB4610-9304-354C-9E9B-D57198AE9866]: 0 x 13

  18 Feb 08:04:32 MacBook - Pro FinderSyncExt [5437]: failed assertion: 15 d 21: libxpc.dylib + 35399 [61AB4610-9304-354C-9E9B-D57198AE9866]: 0 x 13

  18 Feb 08:04:34 - last message repeated 74 times-

  18 Feb 08:06:23 localhost kernel [0]: sleep the error code 0x00000000 0 x 31000000

  18 Feb 08:06:23 localhost kernel [0]: System has rebooted because of lack of sleep/wake

  Journal of EtreCheck

  EtreCheck version: 2.9.6 (256)

  Report generated 2016-02-22 10:20:12

  Download EtreCheck from http://etrecheck.com

  Time 06:00

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Description:

  problems of sleep/wake

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 572

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about 4 days

  Disc information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 498,88 GB (37,54 GB free)

  Storage of carrots: disk0s2 499.25 GB Online

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  Action Star USB HID

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Kingston DataTraveler 3.0

  Hub keyboard Apple, Inc.

  Action Star USB HID

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Action Star USB2.0 Hub

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - Count: 1

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com.devguru.driver.SamsungComposite [no charge] (1.4.28 - 10.6 SDK - 2016-01-27) [Support]

  com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-01-27) [Support]

  /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

  com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2015-06-18) [Support]

  [no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2015-06-18) [Support]

  com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2015-06-18) [Support]

  com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2015-06-18) [Support]

  /System/Library/Extensions/ssuddrv.kext/contents/plugins

  com.devguru.driver.SamsungACMControl [no charge] (1.4.28 - 10.6 SDK - 2014-12-03) [Support]

  com.devguru.driver.SamsungACMData [no charge] (1.4.28 - 10.6 SDK - 2014-12-03) [Support]

  com.devguru.driver.SamsungMTP [no charge] (1.4.28 - SDK 10.5 - 2014-12-03) [Support]

  com.devguru.driver.SamsungSerial [no charge] (1.4.28 - 10.6 SDK - 2014-12-03) [Support]

  Startup items: ⓘ

  With MySQLCOM: Path: / Library/StartupItems/MySQLCOM

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loading] 158 tasks Apple

  [operation] 78 tasks Apple

  Launch system demons: ⓘ

  [loading] 190 tasks Apple

  [operation] 99 tasks Apple

  Launch officers: ⓘ

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-02-07) [Support]

  [operation] com.amazon.sendtokindle.launcher.plist (2015-11-13) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-07-25) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-02-07) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-02-07) [Support]

  [loading] com.adobe.fpsaud.plist (2016-01-29) [Support]

  [loading] com.cocoatech.pathfinder.SMFHelper7.plist (2016-02-16) [Support]

  [loading] com.github.GitHub.GHInstallCLI.plist (2015-03-16) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2016-02-08) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [operation] com.mysql.mysql.plist (2016-01-05) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-07-25) [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist (2014-07-23) [Support]

  [loading] com.bittorrent.uTorrent.plist (2016-01-16) [Support]

  [loading] com.google.keystone.agent.plist (2015-12-14) [Support]

  [loading] com.valvesoftware.steamclean.plist (2016-02-20) [Support]

  Items in user login: ⓘ

  iTunesHelper hidden Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Hidden Dropbox application (/ Applications/Dropbox.app)

  Path Finder Application (/ Applications/Path Finder)

  Hidden Google Chrome application (/ Applications/Google Chrome.app)

  Other applications: ⓘ

  [operation] au.id.haroldchu.mac.Bandwidth.47072 (2015-07-17)

  [loading] au.id.haroldchu.mac.BandwidthLauncher (2015-07-17)

  [loading] com.adobe.Reader.128992 (2016-02-18)

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.Google Chrome (2016-02-19)

  [operation] com.cocoatech.PathFinder.7392 (2016-02-15)

  [operation] com.etresoft.EtreCheck.992 (2016-02-20)

  [operation] com.getdropbox.dropbox.4832 (2016-02-17)

  [loading] com.google.Chrome.160032 (2016-02-19)

  [ongoing] com.valvesoftware.steam.ipctool

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

  QuickTime Plugin: 7.7.3 (2016-01-19)

  AdobePDFViewerNPAPI: 15.010.20059 - SDK 10.8 (2016-02-18) [Support]

  AdobePDFViewer: 15.010.20059 - SDK 10.8 (2016-02-18) [Support]

  Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

  Default browser: 601 - SDK 10.11 (2016-01-19)

  SharePointBrowserPlugin: 14.5.6 - SDK 10.6 (2015-12-15) [Support]

  nplastpass: 3.1.21 (2014-07-22) [Support]

  Unity Web Player: UnityPlayer version 4.6.3f1 - SDK 10.6 (2015-02-19) [Support]

  MeetingJoinPlugin: Unknown - SDK 10.2 (2015-11-14) [Support]

  JavaAppletPlugin: Java 8 updated 73 02 (2016-02-15) check the version of build

  User Plug-ins internet: ⓘ

  Picasa: 1.0 - SDK 10.6 (2014-08-12) [Support]

  3rd party preference panes: ⓘ

  Flash Player (2016-01-29) [Support]

  FUSE for OS X (OSXFUSE) (2015-06-14) [Support]

  Java (2016-02-15) [Support]

  MySQL (2014-09-11) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 498,88 GB disc used: 461,34 GB

  Destinations:

  Backup [Local]

  Total size: 639,79 GB

  Total number of backups: 29

  An older backup: 2014-08-03, 01:32

  Last backup: 2016 - 02-07 at 11:16

  Backup disk size: too small

  639,79 GB backup size < (disc 461,34 GB X 3)

  Top of page process CPU: ⓘ

  8% syslogd

  4% WindowServer

  4% FinderSyncExt (2)

  3% kernel_task

  3% launchd

  Top of page process of memory: ⓘ

  906 MB kernel_task

  836 MB Google Chrome Helper (10)

  467 MB mysqld (2)

  459 MB Path Finder

  336 MB Google Chrome

  Virtual memory information: ⓘ

  808 MB of free RAM

  7.21 GB used RAM (2.57 GB being cached)

  285 MB used Swap

  Diagnostic information: ⓘ

  February 21, 2016, 17:00:33 ~/Library/Logs/DiagnosticReports/Preview_2016-02-21-170033_[redacted].crash

  com.apple.Preview - /Applications/Preview.app/Contents/MacOS/Preview

  February 21, 2016, 07:37:06 AM/Library/Logs/DiagnosticReports/Coda 2_2016-02-21-073706_ [deleted item].cpu_resource.diag [details]

  / Applications/Coda 2.app/Contents/MacOS/Coda 2

  There may be other issues, but you have installed a client third-data clouds that does not work and should be updated or deleted. It could be drive Google, Dropbox or something like that.

• System volume information stolen hard drive. VERY slow computer and windows show only (not answer) for 2 to 10 seconds at a time. Help, please.

  After starting my computer to Windows 7 Enterprise, I noticed that it runs very slowly.  for example, the scrolling of a window of firefox crashes every 10 seconds or more.  The gel lasts between 2 and 10 seconds with the little blue wheel, spinning, (not answer) in the toolbar.

  I pulled the top of resource monitor and to see that 4 PID - C:\System Volume Information\ {guid} {guid} is running non-stop with about 720ko read by writing dry and 6 MB per second Disk 0 length of the queue is pegged at 5.  from time to time (once every 10 to 15 minutes), the queue goes to 0 and the computer starts acting normally (i.e. fast) again.  But once the length of the queue points to 5, the problems continue.

  I am running in raid 5.

  I noticed that vssvc.exe is running (PID 4144) with a reference to c:\System Volume Information and the same GUID as PID 4 - system and kernel.

  Any idea what I can do to get back on my computer?  At this point, it is absolutely unusable.

  Thank you

  Marshall

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox crashes when loading sites and opening tabs

  My Firefox crashes often when I try to open a site in a tab or more. The gel lasts for a few seconds but its really frustrating.

  The version is the latest stable version (3.6.13)
  I tried to reinstall the browser, but the broblem persists.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• Re: Satellite A200 1 M 5 blue screen & gel

  I have an older A200 10 months under Vista Home Premium that came preinstalled on purchase.
  Since the beginning, but more regularly now, it freezes in any program several times a day and is now crashing with the blue screen to come before the dumping and restarting itself.

  It seems to be a major problem, according to the number of people making similar comments on the net and offering all kinds of weird answers and solutions.

  I use this computer every day for business and cannot afford this ridiculous downtime nor I believe that should I have to do anything... it's a new computer!

  What's his problem?
  What is the cause?
  Can it be fixed?

  I can't afford to be without it, or I can afford a the size of the time in the repair shops, until the answer?

  Thanking you in advance for any possible solution/s

  Andrew Putyra
  OZ-LINX.

  Hi Andrew

  AGENTS can result from severe software or a hardware problem.
  But the fact is that the BSOD is a deviation and so it is not easy to say what causes this problem.

  First of all, it is necessary to know if its software or hardware related problem.
  You can find it using the Toshiba Recovery CD. After the new installation of operating system the laptop should run stable and should not occurs the BSOD.

  But if the BSOD will persist, then the problem could be caused by faulty hardware.
  The BSOD appeared on my laptop Toshiba-not too much, and it was related to the temperature inside the laptop.
  The high temperature was a bad influence on the memory modules.

  I cleaned then cooling of modules using a jet of compressed air and the BSOD appeared not.
  But look, man. This does not mean that this could be the reason even to find you BSOD errors.
  So as you can see, it's really not easy to say what could be wrong.

  If the BSOD will persist even after recovery again then I recommend to contact technical service for a detailed notebook check.

• Blue screen more often (Satellite A50-111)

  Hello. My laptop (satellite A50-111) stops with a blue screen. Sometimes when that I start the computer, sometimes, when I'm trying to play a video file, sometimes... I can't understand why... The error messages are inconsistent. They are different all the time (for example: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION or PFN_LIST_CORRUPT or PAGE_FAULT_IN_NONPAGE_AREA or something with IRQ LESS THAN EQUAL etc.).

  I suspect that the problem is the graphics card or RAM memory. It is because the file ialmdnt5.dll and ialmdev5.dll were mentioned in the error screens).

  I ran a test of memory from a CD bootable (memtest-86) and everything seems to be fine with the memory. However, the memory is not the original one. I did a brief day when I bought the laptop (the memory is TMC - 2 x 512 MB)

  Any ideas what the problem might be. The problem is that I have these blue screens more often (I've had them several times before but now I have at least one per day)

  Any ideas/suggestions?

  Thank you.

  More info: I ran the test memory Microsoft (in addition to above mentioned Memtest-86). Is it possible to have the RAM ok, but everything just does not work WITH my Toshiba laptop? In other words, is something special on the modules of memory supplied with the laptop (which I have not because I have improved the memory immediately when I bought the laptop). Thank you.

  Another relevant info: I used the program "auditor" and this explains why I've been blue screens more often. I turn off, but I have still a few blue screens (not as often as before). The newest one: «...» "Stop 0x0000008E... win32k.sys..." "However, I rarely have the same error message

• Blue screen issue started after the warranty more

  Hi I bought a HP laptop and exactly after the warranty period, there is a problem.

  And provided HP customer support a lot of drivers to install but not working.

  Seems that if we extended the guarantee we will get the right driver to install.

  My previous laptop was HP, so I got another. and now, I shall not repeat this error.

  Any soln for blue screen.

  Kind regards...

  Depends on the blue screen.

  You are able to write code for the blue screen error?

  BSOD (Blue Screen Of Death) tend to be caused by software problems, so there may be an easy solution to the problem. However, they can also be caused by serious hardware problems that may be more difficult to correct. In all cases, we will need the code error to determine what went wrong.

• Pavilion g series 1016-tx: with a burned (more likely) display card, I can't get done recovery without getting a blue screen

  Hello all, I have this old laptop that has one of these double called graphics cards. Unfortunately the ATI you won't work after a few years, I get blue screen when you try to start. I disabled the ATI display driver, and he worked well with the integrated INTEL card.

  And then I tried to restore the thing to factory default settings by using the Recovery Manager. Once more I am getting blue screen when you try to start, which means I can't get the recovery made. And this time I won't be able to boot in safe mode to disable the display driver.

  Any help?

  Hi @JonJon ,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more.

  I understand that you have a failed graphics card that overcame you by turning off that one and using the integrated card, when you tried to perform a recovery, that he had failed as a result of the card, recovery won't work due to the fact that it tests the equipment prior to installation and of course it will detect the problem.  I don't know, but after talking with a colleague, you should be able to install from a disk of Windows, but I am not sure. You may be able to download Windows from the web, if this is not possible, it would be probably more cost-effective to replace Notepad.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• Blue screen and after forced registry errors stops under XP, "volume contains one or more unrecoverable problems".

  Hello!  My computer hung on me for quite some time, so a few days ago I had no choice but to make a closed group.  Now, I can't even as much as screen (with the blue bar and the Windows logo).  I tried the following:

  (a) via the Windows Recovery Console chkdsk.  I tried / p, / r, / f, all give me a "volume contains one or more unrecoverable problems." or something like that.  If I try to install a new Windows, as soon as it "looking for previous versions", I get a BAD_POOL_HEADER blue screen with stop error message 0x000000C2.

  (b) I tried to hit every single F shortcut key, but none would let me go in the recovery console (which is F10 for me) and safe mode (which is F8 for me).  Only the F1 works, who has access to my bios Setup, I think.

  If I jump just the recovery console, I just get a white loading bar, who finally stops loading, and then I get a message telling me that one of my files (windows\config\system I think) is missing or damaged.  I tried after a few steps through one of the Windows solutions to counteract this, but I can't even copy/delete files via the command prompt that it denies access.

  Help, please!

  Hello

  · What is the number and the model of the computer?

  You can check the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/what-to-do-about-chkdsk-message-the-volume-appears/e351d02f-F508-489e-AFDC-988d8ddc462c

  Regarding the BAD_POOL_HEADER error, according to the research of mu, it points to be a hardware problem with the memory or a driver issue as possible.

  We can offer further assistance once you are able to boot XP.  Overall however, looks like some ongoing hardware issues.

• Vista restore & Defrag failure more blue screen & restart issue

  I have a desktop Gateway with Vista Home OS. It ran fine until 3 weeks when I started getting blue screens & system closed and then restarted. This seems to happen when the line & open a second search window. I tried to restore, but it fails on all restore points, I've tried to the 14/09/2010. I tried the defrag, but when I click it it close the window & nothing happens. I tried in safe mode but still nothing works. I took the computer to a computer Arrdvark & they said it was a video driver problem but when I got back there was immediately another blue screen & sound did not work. I brought & they disconnected a disk & deleted (deactivated) my Norton 360 program. They have installed a Malware & AVI program? freeware. Defrag & system restore do not always work.

  Hello

  Actually I take it back again and insist that they fix it properly.

  You might be better back up the data and reinstall Windows.

  Check with the drivers, documentation online and Support technique Gateway.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  --------------------------------------------------------------------------

  To fix the BSOD:

  Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
  at this link as they will help solve or at least narrow down the questions. After that you can post the
  information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
  check with a real store of the computer or the system manufacturer's support would be a good idea though
  I would try the possible solutions, you can first.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  You can use BlueScreenView to stick the BSOD info in a message here.

  NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
  Paste the lines in a message here. Make sure and check the file name section. Also check the time
  in MyEventViewer for more information as possible.

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HOW TO MAKE THE LETTERS ON MY SCREEN POLICY MORE BIG - TRYING TO READ THE SCREEN BELOW IT BLUE LETTERS ARE TOO LIGHT AND TOO SMALL

  HOW CAN I MAKE THESE LETTERS MORE GRAND AS WELL ON MY DESKTOP SCREEN - THE LETTERS ON THIS BODY ARE TOO SMALL AND THE LIGHT BLUE IS DIFFICULT TO READ

  Hello

  If you are using Internet Explorer, press the Alt key to display the menu bar , and then select View/Text Size. Select a size that's comfortable for you.

  For the Office, you will need to change the ppp settings.

  Click on desktop and select Screen Resolution.

  In the next window, select Make text and other more or less important.

  In the next window, the Select one of the sizes in option or set a custom size to your needs.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Hi friends, I find this blue screen error more than 1This per day, please help me ♥

  problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 locale ID: 1065 of additional information about the problem: BCCode: 1000008e BCP1: C0000005 BCP2: 919D 0976 BCP3: 94FD2C38 BCP4: 00000000 OS Version: 6_1_7601 Service Pack: 1_0 product: 256_1 files that help describe the problem: C:\Windows\Minidump\040113-30656-01.dmp C:\Users\ehsan\AppData\Local\Temp\WER-54187-0.sysdata.xml

  Hello

  You have installed new hardware on your computer recently? If so, then it would certainly be one of the factors behind the Blue Screen of Death (BSOD). More often than otherwise, BSOD is related to the driver incompatible, withdrawal which solves the problem.

  When exactly do you get the error message?

  We will log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). In addition, we will check for other updates for the device driver.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  See also the following link:

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  In addition thereUO can also Zip or download the content of the C:\Windows\minidump in Sky Drive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  Back with the information so that we can help you further.

• blue screen nvlddmkm.sys for nVidia GeForce 9500 M on studio dell XPS 1340. recently upgradeed to windows 7, fine for a while but now cela and has many problems: BSOD, freezing, CPU utilization more... I DO __HOW FIX IT?

  Hi, well bad get right to it. I have a dell studio XPS 1340 and have recently upgraded to Windows 7 last week. everything was fine until last Monday. When I switched high performance mode for my battery, my nVidia card also goes to Boost Performance. but this time, I got a blue screen with this:

  nvlddmkm.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Since then I tried to update the video driver from the dell site and even the nVidiasite. one of them gives me a blue screen as soon as I get to the windows login screen. and the other divides my GeForce 9500 M into its two parts > GF 9400 MG + GF 9200 AMS. When this happens, I can't use the nvidia Control Panel and I can't go to boost performance. I have uninstalled and installed these drivers in safe mode too, but no luck. I system restored before the weekend, when everything was fine, but still the same problem. so now, I have the driver 8.15.11.8633 version

  other side effects I've noticed is that Skype does not work either. When I first upgraded to win 7, Skype has worked well. but now, when I run a video or normal call, my computer completely freezes. In addition, the games I play seem to decrease in performance. I used to be able to play very good Burnout Paradise, but now there is a significant drop in fps. also, the computer seems to use more cpu and heats more quickly. The battery life has decreased too. and when I use windows media center to connect with my xbox360, my phone freezes when I try to access a video.

  I tried the diagnostics start and the only problem was:

  Error code: 0F00:133 media suitible C Msg:No drive is present

  and today, I used the windows debugger and it came with it. im sure this is good information, but I don't know how interperate it. Please help and thanks in advance!

  Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\111409-21434-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug_symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  The kernel version of Windows 7 7600 SQUARE free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02e0d000 PsLoadedModuleList = 0xfffff800' 0304ae50
  The debugging session: 11:03:52.777 sat 14 Nov 2009 (GMT-5)
  System Uptime: 0 days 1:03:33.572
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .......................................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88007000000, 0, fffff880047d5b1e, 0}

  Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

  Could not read the name of the problem driver
  Probably caused by: nvlddmkm.sys (nvlddmkm + 135b1e)

  Follow-up: MachineOwner
  ---------

  KD >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88007000000, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff880047d5b1e, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: fffff88007000000

  FAULTING_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: System

  CURRENT_IRQL: 0

  TRAP_FRAME: fffff88009d7fdf0-(.trap 0xfffff88009d7fdf0)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff88007000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffffa80057a7270 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880047d5b1e rsp = fffff88009d7ff88 rbp = 0000000000000000
  R8 = 0000000000000000 r9 = 0000000000000000 r10 = 0000000000000003
  R11 = fffffa80057a7298 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  nvlddmkm + 0x135b1e:
  fffff880 '047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4] ds:5110:fffff880' 07000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80002efe1e4 to fffff80002e7ef00

  STACK_TEXT:
  "fffff880 '09d7fc88 fffff800' 02efe1e4: 00000000'00000050 fffff880 ' 07000000 00000000 00000000' fffff880 ' 09d7fdf0: nt! KeBugCheckEx
  fffff880 '09d7fc90 fffff800' 02e7cfee: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 047d60b0: nt! : FNODOBFM: 'chain' + 0 x 42907
  fffff880 '09d7fdf0 fffff880' 047d5b1e: fffff880'04824f5e fffff880'04 c 72260 00000000'00000000 00000000'00000001: nt! KiPageFault + 0x16e
  fffff880 '09d7ff88 fffff880' 04824f5e: fffff880'04 c 72260 00000000'00000000 00000000'00000001 00000000'00000000: nvlddmkm + 0x135b1e
  fffff880'09d7ff90 fffff880'04 c 72260: fffffa80 00000000'00000000 00000000'00000001 00000000'00000000 ' 04ef9000: nvlddmkm + 0x184f5e
  fffff880 '09d7ff98 00000000' 00000000: 00000000'00000001 00000000'00000000 fffffa80 '04ef9000 fffffa80' 057a 7270: nvlddmkm + 0x5d2260

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nvlddmkm + 135b1e

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a4fbef6

  FAILURE_BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  Follow-up: MachineOwner

  Hi anchit02,

  Thanks for posting.

  The page fault has a high probability to be RAM or hard drive related.

  You can test the computer memory using the memory diagnostic tool.

  You can start the memory Diag tool by clicking the ORB start and type 'Memory diagnostic tool' in the search box, clicking on the entry that is displayed.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.