Blue screen of a malfunction of the equipment

Similar Questions

• IRQL_NOT_LESS_OR_EQUAL blue screen. No luck with the help, can't "Repair computer". Help, please!

  Whole new generation that has been very well,

  Mobo: EVGA P55 SLI,

  Processor: Intel Core i7 860,

  RAM: Mushkin matched 2 X 2 = 4 GB

  PS: Blue Antec 750W

  GPU: EVGA Nvidia GTX 260 SLI (x 2)

  HD' Samsung 750Go (x 2) RAID 1

  DVD RW

  Blue Ray RW

  OS: Vista Edition Home Premium 64-bit

  System has been great from the GET go, there are more than 2 weeks. Never a failure to the no boot, no lock ups etc. Woke up in the middle of the night last week with cmptr attempt to restart. No new software or hardware installed had been. Nothing worked, quiet dampened.

  From there on, I was not able to start Windows.

  I entered the BIOS and tried to start a well known point... nothing. Always get blue screen. I have reset the CMOS on the mobo, removed the battery on the mobo and reinstalled. I unplugged the two hard drives power and SATA cables, bought a NEW (third) HD and installed, with only one new HD connected, with a full version of Windows Vista DVD in the CD/DVD drive, tried to boot Windows from scratch... still get the blue screen?

  Blue screen says:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  If this is the first time...

  Check that any hardware or software is installed correctly.

  technical info:

  STOP: 0X0000000A

  (0xFFFFFA8D839EFB18),

  (0 x 0000000000000002),

  (0 x 0000000000000001),

  (0xFFFFF8000A481DD2)

  I was able to run the memory test and it came back without errors. I was not able to get to "repair your computer", as the beginning is never far away. When the computer reboots, it comes to the sequence: normal mobo beeps (five) than even that when the system was working fine... then I get the graph of the mobo splash screen EVGA P55 SLI,... then black screen with "Windows loading files"... which appears just above the loading bar (it looks like gage fuel fill from left to right).

  Once the bar then "fills" Blue Screen of Death!

  It's EXTREMELY frustrating because it was built for me by an employee of INTEL (very smart read), all latest drivers etc. Very little software loaded on the system. Most of the aid that I read guess you can operate within Windows already... Catch 22! I can't!

  Hello

  You get beeps when it worked? This is not normal.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  =======================================

  Think that material:

  Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates - pilot
  updates), or add key software lately? Pilots and security/antivirus/antispyware products are also likely
  suspects. Next message is my generic driver updated methods to use when you get to this section of the
  troubleshooter.

  You can access Mode without fail - repeatedly press F8 as you start - last good configuration or system restore known?

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Look in the Event Viewer to see if something is reported on these reboots.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  BCCode: a

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  -------------------------------------------------------------------------

  It is my generic troubleshooting tool and can probably give more specific help when you give the ICC codes.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Equium A100-549: blue screen error during installation of the recovery CD

  Hey,.

  I recently bought a Toshiba laptop computer, everything worked perfectly until my laptop was attacked. I've got rid of the virus and went to reformat due to a lot of problems that occur. The main one being a mistake has cursed and 'Blah blah' program must be closed. As I continued to get loads of errors.

  http://aumha.org/win5/kbestop.htm
  The types.

  Now then reformatting disk Toshiba said just put the disk in the drive and turn off. I did very well. The said toshiba drive press F12 on startup and then click on run the CD. The CD starts and gets half way thro reformatting.

  Suddenly, I get a blue error screen. I thought oh well ill reboot and continue. This is where the problem started. Because I was half way thro removal/reinstallation of windows I was missing some files. I'll reinstall or try to use the Toshiba CD, I get a blue error screen.

  0 X 00000050: PAGE_FAULT_IN_NONPAGED_AREA
  (Click to consult the Online Win XP Resource Kit article, or see the Windows 2000 Professional, p. 1548 Resource Kit).
  The requested data were not in memory. An address of invalid system memory was referenced. Defective memory (including main memory, L2 RAM, RAM video cache memory) or incompatible software (including remote control and antivirus software) might cause this stop message, as may other hardware issues (for example, incorrect SCSI termination or imperfect PCI card).

  Any ideas what I can do? I don't want to return the Toshiba laptop to fix However im thinking this is the only way out.

  Please if repplying try to keep technical language to a minnium. Thank you, Dan.

  Hello

  It s very strange because the installation since the Toshiba Recovery CD should work properly and without any blue screen message.
  Usually, if the BSOD appears if there is a serious software problem or something wrong with the hardware.
  I don t think that the software on the CD of restoration could be corrupted.

  Have you tried to install the OS from the original CD of Microsoft Windows? It would be very interesting to know if the blue screen also.

  However, I think that your laptop is new and the warranty is valid. In my opinion, you should ask the after-sales Service of Toshiba partner to help him because guys could start the diagnostic test and can find the fault.

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• Di Shutdown does not work, got the blue screen, beware, if it's the 1st time, etc., bios .updated .shutdown worked for awhlie, then got the same blue screen on another attempt to stop

  I had trouble with the fans so I unplugged everything, pulled out the memory and put it in. Shortly after received warning on a stop. I've updated the bios and things worked fine for one night. The following day I uninstaaled some programs and blue rebooted and got the screen again. I can right through the blue screen and sign, but have to stop with button / stop.

  Hello

  What is the exact error message on blue screen?

  This error message can point to a hardware or software that causes this problem. If the computer restarts after the Blue error screen, disable the automatic system failure restart option allows to capture the error message on blue screen.

  Check if the problem persists in safe mode and after the same return.

• Blue screen Crash webcam plugged during the conversation live call video windows

  Whenever my webcam is plugged in a conversation in windows live, to allow us to start a video call, it causes my computer crash blue screen and closed.

  It did not used to do this, and we do not know why?

  We use Vista and the WebCam is a model of Delux from Logitech:

  M/N: V-UBG35, V20

  I tried uninstalling and re - install the WebCam software, but it makes no difference.

  Thank you very much for any help you can give us!

  AppleRight

  Hi pgard,

  1. did you of recent changes on the computer?

  2. what software do you use for video conversation?

  3. What is the error message that you receive in the blue screen?

  It seems the webcam must update software or good version of the driver must be installed.

  Check out the links and try the steps mentioned below.

  http://forums.Logitech.com/T5/video-chat-applications-non/BSOD-for-notebook-webcam-Deluxe/m-p/68910

  http://forums.Logitech.com/T5/webcams/computer-crashes/m-p/118452

  If fails it step above, they are checking in the case where the newspaper for the cause of blue screen of death and post back with the details.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  For additional support, post your request in the forums of Logitech using the link below.

  http://forums.Logitech.com/T5/webcams-video-calling/CT-p/webcam_video

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?

  Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?  Almost everytime I try to print to the printer HP Office Jet m I get the Blue Screen of Death in the middle of printing or shortly after that my document is printed.  I then have to shut down my computer and restart it.  I am running Windows 7.

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask
  
  

• Common blue screen that's happened in the last 2 months

  Hi everyone, I would ask you to help solve my PC frequently in the blue screen before 2 months after the release of Windows installed. I tried recovery my PC but still not after having re-installed the update of Windows. I also tried to recover my PC and then install only the updates of Windows before 2014. The blue screen comes up again. What you can do now & how to solve?

  You can find the minidump via this link info

  https://onedrive.live.com/redir?RESID=76E7A2707D4C9F06! 704 & authkey =! AKyONMJODMwxiqY & ithint = the file % 2cdmp

  Many thanks for your time and your help.

  Best wishes

  Tony

  Error message after restarting the PC *.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 4105

  More information about the problem:
  BCCode: a
  BCP1: 0000000000000048
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF8000313F34F
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\112814-65582-01.dmp
  C:\Users\Miu-Fujitsu\AppData\Local\Temp\WER-198370-0.SysData.XML

  Tony

  You have installed F-Secure!

  Please download and install the update of security for Windows 7 for x 64-based systems (KB2961072):
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=43452

• 6 of Lightroom. When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  Most likely, LR has problems talking to your video card.

  In the Preferences dialog box, tab Performance, disable the use of the GPU.

• .... MALFUNCTION OF THE EQUIPMENT... CALL YOUR PROVIDER OF SUPPORT MATERIAL... THE SYSTEM STOPPED... NMI: CHANNEL CHECK / IOCHK...

  After the execution of 4/5 in my system hang and sometimes, it's the blue screen and message showed...

  HARDWARE MALFUNCTION
  CALL YOUR PROVIDER OF SUPPORT MATERIAL
  THE SYSTEM STOPPED *.
  NMI: CHANNEL CHECK / IOCHK
  Please, I beg you. someone tell me how to solve this problem...

  I would recommend that you contact the manufacturer of your computer and give them the error code, as shown.  The error means there is a serious hardware problem with your computer, it is not what Microsoft or Windows caused or can solve.

• Windows Vista bluescreen malfunction of the equipment. Possibly from Nvidia.

  Hello, I was wondering if someone could help fix me my laptop computer malfunction. Two days while my son was playing world of Warcraft graphics becomes very blurry and grainy and the system shuts down completely, prompting a BSOD to appear. The blue screen said that Nvidia has been the cause of the problem, but even after an attempt to safe mode to remove Nvidia and reboot, the problem still persists then the first time worse. We have tried many things and nothing seems to return the computer to normal.

  Windows Vista Edition Home Premium (Service Pack 2)
  Hewlett-Packard (HP Pavilion dv9700 Notebook PC)
  Intel (r) Core (TM) 2 Duo CPU T5750 @ 2.00 GHz 2.00 GHz
  4.00 GB (RAM RAM)
  64-bit operating system

  BSOD message:

  Technical information:

  STOP: 0 x 00000116 (0xFFFFFA80074D6010, 0x000000000000000D, 0xFFFFFA6002C18CC0, 0 x 0000000000000000 (16 zeros after x)) (15 zeros between x and D)

  nvlddmkm.sys - address FFFFFA6002C18CC0 base at FFFFFA6002C0F000, DateStamp 473183a 1

  The sound skips and repeats on connection, the graphics are of different colors and form rectangles, the internet connection is not found and on starting any program, it crashes immediately. If anyone can help I would appreciate it a lot. If more info is needed, let me know!

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Those who should help as a sort of preparatory work.

  =============================================

  Have you updated your screen/video or other great drivers latetly - check in Control Panel - updated Windows Update of
  see if a driver has been loaded it. Use this generic utility below and when you get to the section of the driver
  Use the methods in the next message, and then go back to the resolution of the problems according to the needs.

  Also check with system Maker Support and Nvidia because it might be problems known - also check in their forums.

  BCCodeL: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to return the display
  driver and recover from a time-out has failed.

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is only coincidence and has no specific meaning (other than)
  pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• Blue screen in decline after replacing the screen

  I got my iPhone 6plus screen replaced at an apple store, earlier this week, and now a random regression a blue screen appears from the top of the screen and goes up and down, disappears, then pops up. Meanwhile, the screen is not sensitive to the touch, but when it stops and I double finger restart my phone several times, it works perfectly fine, then at random again. I've already set up another appointment on the apple store. What is an internal error and apple will charge me to fix this?

  It's either a problem with the screen replacement and Apple will not charge your for this or there is also damage to the logic board and you need to replace the entire phone. There will be an extra charge for this.