Blue Screen of Death on poor management system PTE

I've just updated my XP system to Windows 7 (upgrade to Vista and Win7). Vista is fine, but when starting to Win 7, I get a message 'the driver's mismanagement of system PTEs  It creates a mini dump, but I can't find the program which read.  Win 7 does well in safe mode with network. He goes off looking for solution and never comes back. I have download the latest driver, but it made no difference.  Next steps?

Martha

You could try a combination of things:

-Uninstall the driver for your video card, update manually (don't run do not program the video card driver installation), browse to the contents of the driver file for your software video card and update.

-Try using a different version of the driver, an earlier version (recommended) to see if that will make a difference in the stability of the system.

Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

Tags: Windows

Similar Questions

  • iPhone 5 s blue screen of death/stuck in the system restarts. URGENT

    I got my iPhone 5 s for almost 2 years, but I encountered a problem about a month ago, the screen would go blue with parts of the screen will shake off the rust or dark in thin vertical lines and change to yellow and purple. He would do this at random and I read online some solutions for this problem, but none of them worked, I even reset my phone and when I tried to download your backup as it kept crashing until the computer is stuck in the remake, I can't do an itunes backup as it will not now activate. Help, please.

    If the phone turns when it is powered or respond to iTunes when connected, see this document

    https://support.Apple.com/en-us/HT201412

    If you have tried these remedies, you should probably contact Apple using the link at the bottom of this page.

  • Vista workaround to access restore partition of the system (0xc0000C1F5 Blue Screen of Death error)

    Stats:

    Computer type: HP-Pavilion a6333w

    Product #: KC746AA #ABA

    Operating system: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_ldr.071023 - 1545)

    Processor: AMD Athlon (TM) 64 X 2 processor Dual Core 4800 + (2 CPUs), ~2.5GHz

    Disk space: 500 GB

    RAM: 3 GB

    Graphics card: NVIDIA GeForce 6150SE nForce 430 <-integrated on the mother board.

    ---------------------------

    Location: Try to update Windows Vista SP1 my computer hung up.  After a cold reboot, I got a BSoD (blue screen of death) with the error 0x0000C1F5 code.

    Current problem: whenever I try to boot Vista I get the same error during the vista loading screen.

    I tried the safe mode, the last correct log on the thing, and even a system restore disc that I downloaded from PC World.

    None of these online solutions have worked.

    ---------------------------

    Is there a way to bypass the default loading process and access the recovery partition drive to do a factory reset?

    If there is a way to save the info on my HD it please let me know.

    Thanks, Jcubed.

    Message edited by Jcubed on 11/12/2008 18:06

    I think the (BugCheck Code) code is 0x0000C1F5, and there's a Microsoft Hotfix for this:

    http://support.Microsoft.com/kb/946084

  • Driver vista Power State failure Blue Screen of Death

    Please help me I think it's that I'm doing this... What is going on.. I have replaced the ram and video card, but has seen this problem before I did it... also just reinstalled windows vista... Please help https://skydrive.live.com/redir.aspx?cid=7cbac7e09f2ecb07&resid=7CBAC7E09F2ECB07! 105 & Thierry = 7CBAC7E09F2ECB07! 101 & authkey =! AEE_idLDpolnFKY

    Hello

    Those showed all CAUSE as a Windows component that means something different it led into error.
    Then ZIP or RAR the actuall minidump files and download them on SkyDrive and post a link here for us
    to analyze the other.

    Check this KB:

    The shutdown process does not terminate and you receive an error message on a computer that is
    running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
    http://support.Microsoft.com/kb/972109

    ----------------

    You use Roxio or Nero programs? They have been known to cause this problem even
    If they worked well for a long period of time. If so check with their support.

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------------

    References to Vista also apply to Windows 7.

    This "might" be a power problem, even if this isn't the most common cause - in this case
    It seems that the PSU could be the fault.

    9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
    Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
    If a driver has been updated before this happen. This can also be caused by a loose card or cable
    and even a weak power supply.

    This error means that a driver does not properly support the power state. Check in Control Panel - device
    Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
    and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
    Maybe the only has a problem.

    Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

    General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

    Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
    (and it might still be video interacts with something else). See following message for my
    generic driver update methods.

    BCCode: 9F 0x0000009F<-- read="" this="">
    * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

    ==========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • STATE of POWER FAILURE DRIVER Blue Screen of Death

    I m getting error after reboot please help me...

    http://www.techsupportforum.com/forums/f299/DRIVER_POWER_STATE_FAILURE-600594.html#post3437627

    PLS, get the files from this dump... Pls in the case where no update more... .pls answer...

    where to download the files, though these could not get?

    Hello

    We cannot access the minidump here unless we partner who I don't want to do. Please download the minidumps
    to your SkyDrive or other file sharing sites.

    Analyses on this site watch dwvkbd.sys was the CAUSE.

    ------------------------------------------------------

    Hello

    Check this KB:

    The shutdown process does not terminate and you receive an error message on a computer that is
    running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
    http://support.Microsoft.com/kb/972109

    ----------------

    You use Roxio or Nero programs? They have been known to cause this problem even
    If they worked well for a long period of time. If so check with their support.

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------------

    References to Vista also apply to Windows 7.

    This "might" be a power problem, even if this isn't the most common cause - in this case
    It seems that the PSU could be the fault.

    9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
    Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
    If a driver has been updated before this happen. This can also be caused by a loose card or cable
    and even a weak power supply.

    This error means that a driver does not properly support the power state. Check in Control Panel - device
    Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
    and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
    Maybe the only has a problem.

    Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

    General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

    Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
    (and it might still be video interacts with something else). See following message for my
    generic driver update methods.

    BCCode: 9F 0x0000009F<-- read="" this="">
    * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

    ==========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

    .

  • Blue screen of death now very slow internet

    I get a screen blue of death for a few months now, but never really sorted due to other commitiments, and also, it would be just blue screen flash and then restart automatically. I have not configured until recently to disable automatic reboot, but my computer has collapsed recently. I got these codes from the analysis of the recovery. I presume that these are from the blue screen:

    table. MsoNormalTable {line-height: 200%; do-size: 11pt; do-family: 'Calibri', 'sans-serif' ;}}

    Error code 1000008e c0000005 parameter1, bd053c97, parameter3, parameter4 00000000 b27bb8e8 parameter 2.

    table. MsoNormalTable {line-height: 200%; do-size: 11pt; do-family: 'Calibri', 'sans-serif' ;}}

    Error code 1000008e c0000005 parameter1, bd0b2ddd, parameter3, parameter4 00000000 b28f6bb0 parameter 2.

    table. MsoNormalTable {line-height: 200%; do-size: 11pt; do-family: 'Calibri', 'sans-serif' ;}} Error code 1000008e c0000005 parameter1, parameter 2 bd0b2ddd, parameter3, parameter4 00000000 b7ac7bb0

    table. MsoNormalTable {line-height: 200%; do-size: 11pt; do-family: 'Calibri', 'sans-serif' ;}}

    Error code 1000008e c0000005 parameter1, bd0b2ddd, parameter3, parameter4 00000000 b2d99bb0 parameter 2.

    Often, I would get these blue screens when browsing the internet, but on occasion that it would take place when I played the games. also, my computer decided to turn every time, which is also a matter of concern. It wasn't until my most recent blue screen that my internet has slowed that crashed. videos loading takes forever and surfing the internet, everything takes more time to load up. I always defrag and have done a disc cleanup and virus scanning, but it says im clean. I do these regurly but my internet is still slow. Please help as it is very annoying. actually just trying to fill this took forever!

    Hello

    Pick up the pieces after a computer crash
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available the OneDrive or other file sharing sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.

    Adding files to your OneDrive
    http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

    Download pictures and files
    http://Windows.Microsoft.com/en-us/onedrive/add-photos-files A disk - sharing files and folders and change the permissions
    http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

    ZIP or download the content of the C:\Windows\minidump

    Use OneDrive to upload collected files

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -----------------------------------------------------------------------------------------------

    Are two main causes of this blue screen BIOS and video drivers - check with the system manufacturer's Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be that other drivers so check there. DISABLE the auto-pilot plant as those who are older and if Windows Updates suggest a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
    * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

    BCCode: 8th 0x0000008E is the same as 0x1000008E
    https://msdn.Microsoft.com/en-us/library/ff559271%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens. (If necessary)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Blue screen of death of locale: 1033 BCCode: d1

    Hi, I just purchased a Lenovo Thinkpad Edge 14 in July and I havn't had a problem with it so far. But recently I just got BSOD with the Codes of the following report:

    Signature of the problem:

    Problem event name: BlueScreen

    OS Version:6.1.7600.2.0.0.256.48

    Locale ID:1033

    More information about the problem:

    BCCode: d1

    BCP1: 0000000000000008

    BCP2: 0000000000000002

    BCP3: 0000000000000000

    BCP4: FFFFF880058E8F5C

    OS Version: 6_1_7600

    Service Pack: 0_0

    Product: 256_1

    Files helping to describe the problem:

    C:\Windows\Minidump\012411-28236-01.dmp

    C:\Users\Jesse\AppData\Local\Temp\WER-42525-0.SysData.XML

    I had once. Restarted and after a few minutes it just rebooted itself. I uninstalled all the programs I don't use and so far he did not once again but I really need help to diagnose this problem incase it doesn't.


    Hello

    Check with Lenovo support, their drivers and documentation online and ask in the Lenovo Forums for
    known issues. You might still have some security in force.

    Support from Lenovo and downloads
    http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

    Lenovo forums
    http://forums.Lenovo.com/

    ==================================================================

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
    methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
    programs may also cause this. Check the resolution of problems and when you get to the driver and memory
    test sections refer to generic methods in next message and then returns to the resolution of problems
    If necessary.

    BCCode: D1 0x000000D1

    Cause

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

    This bug check is usually caused by drivers who used a wrong address.

    If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

    • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
    • The function call was made to a function in another pilot, and that this driver has been unloaded.
    • The function was called by using a function pointer that was an invalid pointer.

    BCCode: d1 0x000000d1<-- read="" this="">
    * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

  • problem is with media center (blue screen) have hvr 1600 hauppauge win system is acer aspire m100 2 GB ram

    Windows media center (blue screen) and live tv hauppauge tv 1600

    Hello

    Best estimate is video driver related but the real error code would help to determine the cause and the best solution
    of the action.

    Look in the Event Viewer to see if something is reported on these reboots.

    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

    The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
    -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
    Event name: BlueScreen
    Answer: no
    Cabin ID: 0

    Signature of the problem:
    P1:
    P2:
    P3:
    P4:
    P5:
    P6:
    P7:
    P8:
    P9:
    P10:

    Attached files:
    C:\Windows\Minidump\Mini013110-01.dmp
    C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
    C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

    These files are available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
    Online from the best part of twenty minutes before it occurred. The two users of the
    program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

    Hello

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista

    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

    Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

    Hello

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • need help with the blue screen of death!

    Hey, I recently got two usus strix 980ti and since then iv been doing the blue screen of death when I try to restart my pc and turn off it crashed randomly one or two times as well.

    blue screen:

    Check with your hardware vendor for updates to the bios. Disable the bios memory options such as implementing caching or shading. If you need to use safe mode to remove...

    technical information.

    Stop: 0x0000007e (0xffffffffc0000005, 0xfffff8800554368c, 0xfffff88003938158, 0xfffff880039379b0)

    isub3xhc.sys - address fffff8800554368c base at fffff880054f5000, datastamp 560555f0

    then he dumps memory and reboots.

    any help would be full use thank you.

    Hello

    References to Vista also apply to Windows 7.

    It's my generic how updates of appropriate driver: (look for the BIOS and driver
    updates.)

    This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
    for the drivers Microsoft hide - updated those without drain in their names. (Also updated
    the BIOS and chipset drivers.)

    -Free - DriverView utility displays the list of all device drivers currently loaded on
    your system. For each driver in the list, additional useful information is displayed:
    load address of the driver, description, version, name of the product, the company that
    created the pilot and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit system Maker as replacements and manufacturer device which are the
    most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
    and complete the model of your video - double click - tab of the driver card-
    Note the version information. Now click on UPdate Driver (this can do nothing
    that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
    will update the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
    If there are 3rd party with their own software and drivers and the other main device drivers
    you have.

    Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
    and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
    their latest versions. (Look for the system to update the BIOS, Chipset and software updates
    Site of the manufacturer here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
    REBOOT after each installation.

    Always check in the Device Manager - drivers tab to be sure the version you are
    installation actually appears. This is because that some rollback of drivers before the
    later is installed (particularly that audio drivers) so to install a driver - restart
    -check that it is installed and try again if necessary.

    Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
    SCANNER - check manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using
    the above methods is preferable to ensure the latest drivers from the manufacturer of system
    and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable driver facilities
    in the updates of Windows, which leaves on Windows updates, but it will not be installed
    pilots who are generally older and cause problems. If updates provides a new
    driver then hide it (right click on it) and then go get new ones manually if
    you want.

    How to stop Windows 7 automatically install drivers
    http://support.Microsoft.com/kb/2500967

    ==========================================

    Tests of memory intercept all errors such as memory do not match (possible
    even for the Poles that seem identical) and when the faster memory is placed
    in the system behind the slower memory. So it is best to also swap sticks in and out
    to check for those even if all the tests of memory are not a problem.

    To test the RAM here control - run 4 + hours or so.<-- best="">
    www.memtest.org

    For Vista/Windows 7 memory diagnostics tool

    Start - type in the search-> memory box - find top Memory Diagnostics tool
    -Right click - RUN AS follows ADMIN instructions

    Windows Vista: How to scan / test your RAM or memory with Windows Vista
    Memory Diagnostic tool
    http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

    How to run the diagnostic tool memory in Windows 7
    http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • blue screen of death wake mode 'sleep' how to fix?

    I get a blue screen of death to the awakening of fashion 'sleep' how to fix?

    ==================================================
    Dump file: 040515-21762 - 01.dmp
    Crash time: 05/04/2015 14:16:26
    Bug Check String: IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x0000000a
    Parameter 1: 00000000'00000000
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000001
    Parameter 4: fffff800'02c8e8ec
    Caused by the driver: ntoskrnl.exe
    Caused by the address: ntoskrnl.exe + 74ec0
    File description: NT kernel & system
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7601.18741 (win7sp1_gdr.150202 - 1526)
    CPU: x 64
    Plant address: ntoskrnl.exe + 74ec0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\040515-21762-01.dmp
    Number of processors: 8
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 276 192
    Dump of file time: 05/04/2015 14:17:28
    ==================================================

    BA

    You can, but until you get the new driver and install it, you don't have to.  A new write more old.

    For the future to uninstall a driver, you go into the Device Manager.

    Start > Search > type Device Manager > click on the device you want to the right of the update (in this case audio devices) click > uninstall.

  • Various blue screen of death windows 7, Asus laptop

    Experts/dear Microsoft community,

    Recently I had some problems with my laptop. I tried reformatting and everything but nothing seems to solve the problem long term, brief (2-3 days)

    My computer crashes (blue screen of death), whenever I play big games online. Games such as Company of Heroes, or Dota 2, etc. If I don't play these games solo (offline) I have no problems. Also all other programs work perfectly.

    I have a feeling that it has to do with my Asus laptop drivers, I tried to update, restore and re - install, but without result.

    To tell you that as the scenario for the crash: I start the game, I log on online, join a game. Then after 20 to 25 minutes of play online with no loss of FPS, it auto-shutsdown the game with absolutely no message, followed with an accident soon after, sometimes immediately.

    Here's the accident report I got the program: Whocrashed

    Look forward to hearing your suggestions.

    Concerning

    computer name: ICRASHEVERYWEEK
    Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
    Windows dir: C:\Windows
    Material: N61Ja, ASUSTeK Computer Inc..
    CPU: GenuineIntel Intel (r) Core i5 CPU M 430 @ 2.27 GHz Intel586, level: 6
    4 logical processors, active mask: 15
    RAM: 4140355584 total
    VM: 2147352576, free: 1929850880

    --------------------------------------------------------------------------------
    Crash Dump Analysis
    --------------------------------------------------------------------------------

    Crash dump directory: C:\Windows\Minidump

    Dumps are enabled on your computer.

    Friday, November 7, 2014 22:01:49 this computer crashed
    crash dump file: C:\Windows\Minidump\110714-44912-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x5996A0)
    Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Friday, November 7, 2014 22:01:49 this computer crashed
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
    Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
    Bug control description: this bug check indicates that a system thread threw an exception that the error handler did not.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Friday, November 7, 2014 18:29:29 GMT crashed your computer
    crash dump file: C:\Windows\Minidump\110714-17737-01.dmp
    This was probably caused by the following module: athrx.sys (athrx + 0x1C4F76)
    Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF88005E67F76, 0xFFFFF880035A7438, 0xFFFFF880035A6C90)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
    file path: C:\Windows\system32\drivers\athrx.sys
    product: Atheros CB42/CB43/MB42/MB43 network card driver
    company: Atheros Communications, Inc.
    Description: Atheros Extensible wireless device driver
    Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
    Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

    Friday, November 7, 2014 18:27:43 GMT crashed your computer
    crash dump file: C:\Windows\Minidump\110714-14570-01.dmp
    This was probably caused by the following module: atikmdag.sys (atikmdag + 0x1421E5)
    Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88005B4A1E5, 0xFFFFF88003E795E0, 0x0)
    Error: SYSTEM_SERVICE_EXCEPTION
    file path: C:\Windows\system32\drivers\atikmdag.sys
    product: ATI Radeon Family
    company: ATI Technologies Inc.
    Description: ATI Radeon driver in Kernel Mode
    Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
    Google search: ATI Technologies Inc. SYSTEM_SERVICE_EXCEPTION

    Friday, November 7, 2014 6:26:57 PM GMT crashed your computer
    crash dump file: C:\Windows\Minidump\110714-15194-01.dmp
    This was probably caused by the following module: atikmdag.sys (0xFFFFF88005B20B5B)
    Verification of error code: 0 x 50 (0x0, 0xFFFFF88005B20B5B, 0xFFFFF8A0024CF000, 0x0)
    Error: PAGE_FAULT_IN_NONPAGED_AREA
    file path: C:\Windows\system32\drivers\atikmdag.sys
    product: ATI Radeon Family
    company: ATI Technologies Inc.
    Description: ATI Radeon driver in Kernel Mode
    Bug control description: This indicates that invalid system memory was referenced.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
    Google search: ATI Technologies Inc. PAGE_FAULT_IN_NONPAGED_AREA

    Friday, November 7, 2014 17:57:41 CEST your computer crashed
    crash dump file: C:\Windows\Minidump\110714-49280-01.dmp
    This was probably caused by the following module: atikmdag.sys (atikmdag + 0x899D90)
    Bugcheck code: 0xBE (0x12F9A6860, 0xFFFFF880035BC560, 0xFFFFF880062ACD90, 0xE)
    Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
    file path: C:\Windows\system32\drivers\atikmdag.sys
    product: ATI Radeon Family
    company: ATI Technologies Inc.
    Description: ATI Radeon driver in Kernel Mode
    Bug control description: sounds if a driver attempts to write to a memory segment read-only.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
    Google search: ATI Technologies Inc. ATTEMPTED_WRITE_TO_READONLY_MEMORY

    Friday, November 7, 2014 17:55:49 this computer crashed
    crash dump file: C:\Windows\Minidump\110714-16692-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
    Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000395AA49, 0xFFFFF8800AB310C0, 0x0)
    Error: SYSTEM_SERVICE_EXCEPTION
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Saturday, November 1, 2014 8:24:12 PM GMT crashed your computer
    crash dump file: C:\Windows\Minidump\110114-17550-01.dmp
    This was probably caused by the following module: rdyboost.sys (rdyboost + 0x2C476)
    Bug check code: 0x1000007E (0x0, 0xFFFFF880035248B8, 0xFFFFFFFFC0000005, 0xFFFFF88003524110)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
    file path: C:\Windows\system32\drivers\rdyboost.sys
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: driver for ReadyBoost
    Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

    Saturday, November 1, 2014 8:22:52 CEST your computer crashed
    crash dump file: C:\Windows\Minidump\110114-18142-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
    Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
    Error: "KMODE_EXCEPTION_NOT_HANDLED"
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Wednesday, October 15, 2014 9:09:56 CEST your computer crashed
    crash dump file: C:\Windows\Minidump\101514-50856-01.dmp
    This was probably caused by the following module: athrx.sys (athrx + 0xF9D77)
    Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880051BED77, 0xFFFFF880033A7708, 0xFFFFF880033A6F60)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
    file path: C:\Windows\system32\drivers\athrx.sys
    product: Atheros CB42/CB43/MB42/MB43 network card driver
    company: Atheros Communications, Inc.
    Description: Atheros Extensible wireless device driver
    Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
    Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

    --------------------------------------------------------------------------------
    Conclusion
    --------------------------------------------------------------------------------

    13 dumps were found and analysed. Only 10 are included in this report. 2 third party drivers have been identified to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

    athrx.sys (Atheros Extensible, Atheros Communications, Inc. wireless device driver.)
    atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.)

    If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

    Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

    Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

    Analysis of Dump 1Crash
    --------------------------------------------------------------------------------

    Crash dump directory: C:\Windows\Minidump

    Dumps are enabled on your computer.

    Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
    crash dump file: C:\Windows\Minidump\101314-17004-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
    Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
    Error: CID_HANDLE_DELETION
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: this bug control appears very rarely.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheck + 0x0)
    Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
    Error: CID_HANDLE_DELETION
    Bug control description: this bug control appears very rarely.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Monday, October 13, 2014 12:15:52 CEST your computer crashed
    crash dump file: C:\Windows\Minidump\101314-17784-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x2EDF95)
    Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003145F95, 0xFFFFF88004650448, 0xFFFFF8800464FCA0)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Monday, October 13, 2014 11:09:34 AM GMT crashed your computer
    crash dump file: C:\Windows\Minidump\101314-14320-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
    Bugcheck code: 0xA (28, 0 x 2, 0 x 0 x 0, 0xFFFFF80002F21D80)
    Error: IRQL_NOT_LESS_OR_EQUAL
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Monday, October 13, 2014 2:53:45 AM GMT crashed your computer
    crash dump file: C:\Windows\Minidump\101314-46987-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
    Bugcheck code: 0x3B (0xC0000005, 0x0, 0x0, 0xFFFFF88002DA2910)
    Error: SYSTEM_SERVICE_EXCEPTION
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Sunday, September 28, 2014 17:57:12 CEST your computer crashed
    crash dump file: C:\Windows\Minidump\092814-16926-01.dmp
    This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0xC0A1)
    Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
    Error: "KMODE_EXCEPTION_NOT_HANDLED"
    file path: C:\Windows\system32\drivers\dxgmms1.sys
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: DirectX Graphics MMS
    Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.
    Google search: Microsoft Corporation KMODE_EXCEPTION_NOT_HANDLED

    Monday, September 22, 2014 6:50:05 PM GMT crashed your computer
    crash dump file: C:\Windows\Minidump\092214-42525-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
    Bugcheck code: 0x1A (0xFFFFF780C0000000, 0x1DEE, 0 x 5003, 0x420700003BD8)
    Error: MEMORY_MANAGEMENT
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: This indicates that an error occurred serious memory management.
    This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    --------------------------------------------------------------------------------
    Conclusion
    --------------------------------------------------------------------------------

    7 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

    dxgmms1.sys (DirectX Graphics MMS, Microsoft Corporation)

    If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

    Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

    Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

    PC! PK

    These two were related to the material.  Specifically of the RAM.  Please run memtest

  • Blue screen of death event 41 (task category 63), Kernel-Power

    Original title: Blue Screen of Death

    Hello, I get the blue screen of death on my desktop computer.  I looked at records of Viewer event and here are the results:

    Event 41 (task category: 63), Kernel-Power

    BugcheckDode10

    BugcheckParameter1 0x0

    BugcheckParameter2 0x2

    BugcheckParameter3 0x3

    BugcheckParameter4 0xfffff8000369592c

    True SleepInProgres

    PowerButtonTimestamp 0

    I'd appreciate comments on this issue!  Thank you very much!

    These were related to scmndisp.sys which is a driver that is associated with a Netgear wireless adapter.  Yours is 2011 so I re - install the most recent driver available and update the following drivers

    Old drivers

    AFC.sys 12/07/2006 01:48:20
    lmimirr.sys 10/04/2007 18:32:45
    C:\windows\system32\drivers\lmirfsdriver.sys 2008-07-14 12:26:56

    How to find drivers:


    Search
    Google for the name of the driver
    Compare the Google results with what is installed on your system to determine on what device/program, it belongs to
    Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
    If there are difficulties to locate them, post back with questions and someone will try and help you find the right program

    The most common drivers can be found on these pages:
    http://www.carrona.org/dvrref.php
    http://SysNative.com/drivers/

    Driver manufacturer links are on this page: http://www.carrona.org

  • blue screen of death 0 x 00000050 ntoskrnl.exe

    Evry time I play company of Heroes 2, I got a blue screen of death

    PAGE_FAULT_IN_NONPAGED_AREA 0 x 00000050 fffff880 '09b 80004 00000000 00000001' fffff880' 0516a 384 00000000 00000000' ntoskrnl.exe ntoskrnl.exe + 5 has 440 x 64 ntoskrnl.exe + 5 a 440
    I downloaded the minidump and here his him shorten the link :)

    http://sdrv.Ms/15koHJI

    Please help me

    DK

    This a DMP are inconclusive (we usually have 2 or more), but you should try these things first

    Older drivers who need update
    emupia2k.sys 09/04/2007 09:08:10
    ctsfm2k.sys 09/04/2007 09:08:11
    ctoss2k.sys 09/04/2007 09:08:14
    ha10kx2k.sys 09/04/2007 09:08:15
    hap16v2k.sys 09/04/2007 09:08:17
    ctaud2k.sys is 09/04/2007 09:08:29
    ctprxy2k.sys 09/04/2007 09:08:30
    COMMONFX. DLL 2007-04-09 09:08:38
    CTAUDFX. DLL 2007-04-09 09:08:39
    CTSBLFX. DLL 2007-04-09 09:08:42
    HECIx64.sys 2010-10-19 19:33:43
    C:\windows\system32\drivers\elbycdio.sys 2010-12-16 18:58:13
    VClone.sys 15/01/2011 12:21:04
    anvsnddrv.sys 2011-11-14 04:17:35
    e1i63x64.sys 29/02/2012 23:25:14

    How to find drivers:


    Search
    Google for the name of the driver
    Compare the Google results with what is installed on your system to determine on what device/program, it belongs to
    Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
    If there are difficulties to locate them, post back with questions and someone will try and help you find the right program

    The most common drivers can be found on these pages:
    http://www.carrona.org/dvrref.php
    http://SysNative.com/drivers/

    Driver manufacturer links are on this page: http://www.carrona.org


    ALSO I would like to use the built in Defender & remove Kaspersky

Maybe you are looking for

  • Don't get the names of the tracks - No Error Message

    Hello I have a problem that happens with all CD when I try to import, no track, the name appears and when I choose to get names follow No error message is given, this used to work but stopped after the recent updates. What is strange, is that when I

  • Blutooth driver

    I have a laptop HP (HP 15-d017tu), I am not able to find the driver Blutooth of it. Hardware ID is mentioned below for the same thing. PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103CPCI\VEN_1814 & DEV_3298

  • Update Compaq SR5610F graphics card?

    I recently bought the Compaq Presario SR5610F, and I plan on upgrading the video card fast enough. I know that the PC has a PCIe (x 16) slot, but I am also concerned about food. I just found out that it only comes with a power of 250W and I was wonde

  • Icons on the desktop are covered by some kind of a generic icon after installing updates

    Original title: updated ruined my office! Once the updates have been downloaded and installed to my computer Gateway DX4840-03F (Windows 7 Home Premium x 64) icons on my desktop are now covered by some sort of a generic icon applied on top of the ico

  • On my old computer wireless network connection disappeared. When I try to update or roll back, nothing happens.

    I just wrote all of the above details in the section title - I can connect to the internet with an ethernet cable, but not with my wireless connection (e.g. in McDonald's restaurants). I bought a new computer with Windows 7 and installed a dlink on t