On my old computer wireless network connection disappeared. When I try to update or roll back, nothing happens.

Similar Questions

• How can I display characters in 'Wireless Network Connection' - > 'Properties' when the checkbox "show characters" is grayed out?

  How to display hidden characters in the Properties tab, in the connection, that I am using, under the wireless network connection box when that I should be able to check box is greyed out and unclickable?

  Also NOTE: When you try to use ctrl-p method, a ctrl-v, at the point where you click the box of characters on that he blanks.

  Hello

  You are connected to a domain?

  If the show characters check box is grayed out, the network, or the computer may be restricted by a group or local policy.

  If this computer is connected to a working network, I suggest you contact your help desk or IT Department.

  Concerning

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Wireless network connection disconnects when you plug in the charger and the error message "no connection available or limited connectivity.

  Original title: wireless computer does not work when plugged in and load, why?

  have a laptop Windows 7 who had originally installed XP. I have not changed anything inside her, but suddenly one day any time, I have the unit plugged my Ethernet and wireless turns off. As soon as I unplug it, the computer note immediately that there is a wireless card and connects.

  
  

  The computer has never done this until two weeks ago. It works just fine when unplugged, but still once, as soon as I plug it in it disconnects and States they has "No connection available" or "limited connectivity". I started seriously annoyed because it's my main laptop and I must wait for it to load in order to do something with him for an extended period of time.
  The device information:

  > Ze2000 HP (Pavilion series)
  > Original OS: Windows XP Home Edition
  > RAM: 512 MB
  > 100 GB hard drive
  > AMD Turion 64 Mobile Technology ML-34
  ___________________________________________________________________________________________________
  I can provide information. No errors appear in the error log or event viewer and I made backups and reset 3 times in recent weeks.

  Hello

  I appreciate your efforts to solve the problem.

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Are you having the same problem when you use the configuration of a network connection?

  I suggest you to check if there is no wireless or mobile network\devices which can interfere with the wireless network and remove if there is.

  Method 1:
  I suggest you to download and install the latest network driver on the manufacturer's Web site and check if it helps.

  Check out the link:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=442888&TaskID=135

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:
  If the problem persists, I suggest you to check that your device is allowed to the computer.

  a. click on start and type Device Manager in the box start the search .

  b. open the Device Manager and expand network adapter.

  c. right-click on the network driver and click Properties.

  d. click the power management tab.

  e. uncheck all options.

  f. click OKand then click OK again.

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  
  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

   

• My old Apple ID keeps popping up when I try to update apps

  WWhen is trying to update a my old Apple ID application keeps asking for a password. I use is no longer that I had

  You must delete and re-download this request; the old Apple ID is stored inside.

  (137728)

• Wireless network connection does not

  I can't access a wireless connection with my computer wireless network connection. The icon in the bottom right of the screen shows a red X and says 'not connected wireless network connection. The wireless on my keyboard button does not illuminate

  I tried to change the channel on the new ADSL2 wireless router and refreshed looking for wireless connections, but still not found connections. I have not used a wireless router before and never used a wireless connection with this computer so I don't know if the wireless card works or not, if the properties of the wireless adapter indicate that it works. Is there a way to check if the computer's wireless card is running or connected and if not, how can it be connected? Thank you

  I finally understood by trial and error, why I was unable to connect wireless to a modem, that you sent me. In my control panel, I found that the properties of HP Wireless Assistant had "Hide status icon" checked, so I checked it and the icon came in the bottom right of my screen. I left then clicked that icon and it showed the wireless and bluetooth was OFF so I went in and it now works.

  Why HP support could not help me in what I don't know, I just got the race!

  Hope this helps others with similar problems.

• Computer laptop Windows 7 can not find wireless network connections

  My Samsung RV510's laptop had windows 7 on front and without wire worked but recently my hard drive for this laptop broke and I had to get a new HARD drive. Now I have a new one that I installed windows 7 on it and now it cannot find wireless network connections even if there is a broadband router in the same room as the laptop. When I try to connect to a wireless network, the computer does not find.

  You have turned on WiFi?  Have you checked Device Manager to see if your wireless network card has a driver?  The different procedure for Urning edited that WiFi on East and model, so you for each brand will have to read your user guide - I promise he won't give you the leprosy!  :-)  To check the driver, click Start and right click on computer, then click Properties.  Click on Device Manager and look for the entry that says that the network cards.  Click the arrow to the left and look to see if

  There is a! or? next to him.  If so, you must download the driver appropriate from your manufacturer.

  Good luck.

• Equium A60 - no wireless network connection

  Hello world

  I have had a good look through the forums and can't find anything related to this but my apologies if this has been addressed elsewhere :-)

  I set up a wireless home network with a Windows XP desktop computer with a router and a laptop old Win98, WinXP SP2, which I can't connect and an Equium A60. I installed two different network on the A60 USB adapters, seems to be okay with all of them except that there is no "wireless network connection" listed under network connections Control Panel. Both cards work fine on two other machines, so there must be a problem with the A60. I installed an adapter and then uninstalled before trying another.

  Under control-> connections Panel Network, I can see an old broadband connection and the connection to the Local network (which is allowing me to connect to the router via Ethernet, so that the router will work), but the wireless network connection icon is not there. The driver for the USB adapter makes its appearance in Device Manager and is reported as working properly, but if it worked correctly then (I think) a wireless connection icon should appear - it happened with my other WinXP desktop.

  Any ideas of what could be the cause?

  Thanks in advance
  Gareth

  Post edited by: g_shaw - added a few details

  Hello

  I guess that the external WLan USB stick has been recognized one installed correctly. You said it appears in Device Manager. Are you sure that the WLAN USB key has been recognized to 101%? !!

  If the WLAN USB key is recognized correctly, check the properties of this stick. (I think you should right click and then click on properties).

  But if the stick was not recognized, you must verify the properties of the single USB ports and power safe mode.
  Choose the USB single root hubs in device, right click, properties, tab power management Manager and disable the option called allow the computer to turn off the device to save energy.

  So maybe it helps

• "Wireless network connection" is not a valid IP configuration. "

  When I try to connect to the internet via a wireless connector I can but it takes anywhere from 10 to 20 minutes and many attempts that all generate the message title above.  but then it finally works.  It works great once its connected but the same connection problem happens the next time that I try to connect.  I don't know much about the technical problems for all responses must be in pretty easy to understand the jargon and thanks :)

  Hi Richard,

  Welcome to the Microsoft community.

  According to the description, resembles the internet connection is slow.

  What operating system you have installed in the computer?

  I suggest you click on the links and follow the instructions to resolve this problem:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please post back with more details so that we can help you better.

• Wireless network connection

  I am an employee of Life Insurance Corporation of India.When I turn on my PC in the office premises, a connection named "dlink" appears in my PC. After the connection (without using any modem or external device) I can browse the internet. How is that possible? The brief description of the connection is the following:

  Wireless network connection

  Connectivity: Internet IPv4

  Name: dlink

  Strength: good signal/fair/poor

  Security type: unsecured

  Radio type: 802.11n

  SSID:Dlink

  Should I access the internet by connecting through this link? Y at - it all threat to the security of my personal information or whether it's bad for me. Please notify. The link also shows a message that "the information transmitted by means of this link can be visible to others". Please specify.

  Hi SANJIT_78,

  ·         The computer is connected to a domain environment?

  ·         Are you facing any performance issue with wireless network connection?

  ·         What operating system is installed on the computer?

  The computer you are using apparently have a wireless network interface installed in it and therefore can detect and connect to any available wireless network. The dlink network is the name of a wireless network available in your area and your computer to connect to this wireless network.

  Wireless networks more private need a password to connect to them and therefore are protected. But the dlink network to which you are connecting is apparently a public wireless network, and it doesn't have a password to connect to it. So which allows any user to connect their devices to this network wireless. Due to this insecure wireless network mode, your computer displays you the message "the information transmitted through this link may be visible to others". If you want to connect to this wireless network, I suggest you first protect your computer with a good program antivirus and firewall.

  To enable the Windows Firewall on your computer, you can check this link:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Hope this information helps.

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• An error occurred while renewing interface wireless network connection: unable to contact your DHCP server. Request a expires.

  I use an Acer Asspire One with Windows XP. We have wireless through AT & T Uverse. The netbook has an Atheros AR5007EG Ethernet card.

  A number of things have taken place lately: I had not used the Acer for some time and the battery was dead and would not recharge. I could book until when it was plugged, but could not get on the Internet. I found online that the solution to the battery problem was to download a new bios that worked wonderfully and it is now loaded. Recently, our AT & T router died and was replaced. I put the new WEP keys in two other computers, and they connect to the Internet. I can't connect to the Internet with the Acer. I tried ipconfig / renew and get the error message: "an error occurred during renewal of the wireless network connection interface: unable to contact your DHCP server.» Request a expires. No operation can be performed on Local area connection while it has its media disconnected. "On the tab"Choose a wireless network", it shows my network and said"absorbing the network address"but nothing happens. When I do ipconfig I see that there is no IP address.
  I took the computer to Starbucks this morning, ran ipconfig / renew and she acquired the IP address and I was able to connect to the Internet. I brought the computer home and tried and failed to connect. The IP address is back to 0.0.0.0 and the error message appears when I try to renew it.
  I hesitate to make a lot of changes since it was working with a different network.
  Original title: IP address is missing
  These forums are wonderful. I tell myself that I've saved the cost of a new battery using the bios, I found on a forum!

  Hello

  DHCP - Dynamic Host Configuration Protocol is a protocol used by devices computer network (DHCP clients) that dynamically distributes the IP address of the destination host. Now the error indicates that your computer is not able to communicate with the server and assign the IP address.

  Method 1:

  Let us try to disable the firewall and check the issue.

  Note: Re-enable the firewall after checking the issue.

  Check whether the problem is resolved.

  Method 2:

  If the issue is not resolved, you can follow the steps from the link provided and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Hope this helps and let us know if you need more assistance.

• How to xp 64 pro wireless network connection wizard

  I installed xp64 pro on my desktop and a dlink wireless card but there is no wireless connection wizard. How and where can I get a wireless network connection wizard. I also tried to get for xp64 sp2 but could not find.

  Hello

  · What is the number and the model of the computer?

  You can check the link below which has steps on how to set up automatic wireless network configuration: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  You can download Windows Service Pack 2 for Windows XP Professional, x 64 Edition: http://www.microsoft.com/download/en/details.aspx?id=17791

• Yellow triangle with! the wireless network connection in the task bar icon, but ok in Device Manager

  I still need help: 11-24-10' uncorrected problem after all

  I have a laptop of refurbished HP older Pavilion ze5385US who has recently lost the wireless connection.  Now, I have to leave it plugged in to use, not practical at all.  I did the right click on the icon to open the network connections, left clicked wireless network connections and then clicked "repair this connection.  The uninstaslled of the computer, and then was not able to reinstall.  When I checked D, it was empty.  I thought it was where restoration stuff should have been.  So I downloaded and reinstalled much Express IEEE 802.11 PCI card Lan, until I found the one that the computer would be except.  Now, it appears in device very good Manager, but has theyellow cone with! on the icon in the status bar at the bottom.  When I raised it lights, it is said: 13 of (ANY) wireless network connection, speed: 11.0 Mbps, Signal strength: Excellent, status: limited or no connectivity.  When I choose "View available wireless networks", I get "Windows cannot configure this wireless connection.  Under network without wire/support/details of connections, Iget physical address: 00-02-8A-92-BE-0C, IP address: 169.254.196.112 subnet mask: 255.255.0.0, then the default gateway, DNS server, WINS server & have not enumerated values. I'm afraid to hit the repair again, it could wipe out the only map I've found so far that is accepted by my computer.  When I try to enter the knowledge base for WinXP, I get an error for this page, as well as several other help pages I tried the site of microsoft.com for help.  When I used configurationtool thewireless zero in respect of services & restart earlier, I had a red X on my icon, so I guess I've lost my card after all.  Can I disable this?  The map always shows as OK in Device Manager.  Any ideas anyone?  I need help here please.

  Hello

  I thank you and wish you the same.

  I see that your problem has been solved using the HP driver that you mentioned on Thursday, November 18 in your message and the Express.sys is a problem with Windows install.

  I suggest to install the version of Windows install 4.5 on the system from the link below and then update the driver from the link that was attached to your question before and check.

   

  Step 1:

  Install windows install 4.5

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2:

  Update the driver from the link you mentioned in your previous post.

  I suggest you to check with TP-link if this model is compatible with Windows XP or not.

  http://www.TP-link.com/products/ProductList.asp?class=WLAN#S6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.