Blue screen "PAGE_FAULT_IN_NONPAGED_AREA" error message
When I press the power button on my HP COMPAQ PRESARIO CQ50-115NR PC notebook it displays the usual Compaq and loading windows files. (It runs Windows Vista home top factory installed) Fuzzy Microsoft windows will appear and disappear, yielding to a blue screen show following.
"A problem has been detected and windows has shut down to prevent damage to your computer.
Technical information STOP: 0 x 00000050 (OX00000000, OX9C3A7877, OXAFEDO935, OX00000002) 1. I TRIED TO REBOOT IN SAFE MODE NOTHING IS THERE FACT.
"PAGE_FAULT_IN_NONPAGED_AREA".
If this... etc.
2 HDD SELF TEST QUICK AND COMPREHENSIVE AND EXIT THE SCRAPPING OF THE CHANGES. (As shown in method 2 of HP Support site)
3. I TRIED TO OPEN IT WITH RECOVERY DVDS BUT FAILED.
I AM STILL UNABLE TO START WINDOWS AT ALL.
THAT IS WHY I CAN NOT START THE SYSTEM RESTORE.
PLEASE HELP ME!
emsband
Hi Emsband,
Thanks for posting your question on the Forums of Windows Vista.
It seems that a recent change in hardware or software on the machine caused the problem.
I will recommend you to unplug all external equipment connected to the machine and check if the machine starts.
We can also try to perform a Windows Vista startup repair in order to solve the problem. You can follow the given link:
http://support.Microsoft.com/kb/925810
Hope the information will help. Please go back and let us know.
Thank you & best regards
Ashish Gupta
Microsoft Answers Support Engineer
Tags: Windows
Similar Questions
-
Satellite A350 - blue screen with error message
At the start of windows7, I get a blue screen with error message 0 x 0000116.
Can someone help please?
It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb
It is for VISTA but should be the same for win 7 too.
-
Blue screen with error message
Product name: HP Media Center M7250n desktop PC
Product #ED842aa-aba
I get a blue screen with error messages asking if this is the first time I get the error and then at the end it says: it is dumping memory. I would wipe my hard drive and reinstall XP but my system is out of warranty and HP gives me a recovery CD. What are my options.
Hello
If you are looking to purchase a set of recovery disc for your system, you can visit the site http://www.restoredisks.com/.
NOTE: This site is not the HP website and it's a third-party site where they provide the recovery for different computer manufacturers disk (they charge for discs).
-
Bluetooth, causing the blue screen with error message: out of State driver
Hello
I am posting this in the other thread here but it was closed before I could solve the problem.Background:I left on vacation for 4 weeks and I left my computer. When I came back, my computer was giving me the following problems:- Video playback of my SIN was rough and freezing - I fixed that by finding out one of the drives died on RAID-1
- After 30 minutes, the computer would give me a Blue Screen of Death (BSOD) and reboot - I have updated every driver I could, each piece of software, update the BIOS and then finally solved the problem by updating the firmware on my boot drive: a Crucial 128 GB SSD m4
These two problems have been resolved, but can be useful to understand the current problem
Current problem:After trying to use the webcam for video chat via Gtalk or Skype, my Bluetooth Logitech MX5500 keyboard and mouse stop responding. About 10-15 minutes after the call is completed, my computer gives a Blue Screen of Death with the message of STATE FAILURE of PILOT.The minidump file is available here, and I understand that the cause is due to my Bluetooth driver: http://dl.dropbox.com/u/30633232/052212-24429-01.dmpWhat I tried:- I've updated all the drivers available on the Asus site for my motherboard Asus P8P67 EVO, including Bluetooth and the BIOS driver
- I've updated my HD Audio integrated system with the drivers available on the Web from Realtek site
- I've updated all my drivers webcam and Logitech software
- I uninstalled, restart and reinstalled my Bluetooth drivers
- I have not matched and repaired my Logitech MX5500 keyboard and mouse
- I uninstalled, restart and reinstalled both Skype and Gtalk for Chrome, Firefox and Internet Explorer plugin
The ask:I'm out of ideas... would like to get the genius of someone on these boards help me please!The problem may be with the c:\windows\system32\drivers\sptd.sys:
******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, a device object has been blocking an Irp for too long
Arg2: fffffa8009d73060, physical device from the stack object
Arg3: fffff80004c093d8, functional device object of the stack
Arg4: fffffa800e0c3190, blocked IRPDebugging information:
------------------DRVPOWERSTATE_SUBCODE: 3
Nom_image: usbhub.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4d8c0c15
MODULE_NAME: usbhub
FAULTING_MODULE: fffff88008c06000 usbhub
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0X9F
Nom_processus: System
CURRENT_IRQL: 2
STACK_TEXT:
"fffff800'04 c 09388 fffff800'03502702: 00000000' 00000000'00000003 fffffa80 ' 09 0000009f d 73060 fffff800 ' 04c093d8: nt! KeBugCheckEx
"fffff800 ' 04 c 09390 fffff800 ' 034a2e4c: fffff800 '04c094c0 fffff800' 04c094c0 00000000'00000000 00000000'00000003: nt! : FNODOBFM: 'chain' + 0 x 34050
"fffff800 ' 04 c 09430 fffff800 ' 034a2ce6: fffffa80 '06cdf5b0 00000000'01642618 00000000'00000000 fffffa80' 097aa901: nt! KiProcessTimerDpcTable + 0x6c
fffff800 '04c094a0 fffff800' 034a2bce: 0000034f 'c591e29e fffff800' 04c09b18 00000000'01642618 fffff800'0360 d 588: nt! KiProcessExpiredTimerList + 0xc6
"fffff800 '04c09af0 fffff800' 034a29b7: 0000011a ' 68920ac3 ' 01642618 0000011 0000011a has ' 68920 has 32 00000000'00000018: nt! KiTimerExpiration + 0x1be
fffff800 '04c09b90 fffff800' 0348feca: fffff800 '0360ae80 fffff800' 03618cc0 00000000'00000002 fffff880' 00000000: nt! KiRetireDpcList + 0 x 277
fffff800'04c09c40 00000000' 00000000: fffff800 ' 04c0a000 fffff800'04 c 04000 fffff800 ' 04c09c00 00000000' 00000000: nt! KiIdleLoop + 0x5aSTACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0x9F_3_btfilter_IMAGE_usbhub.sys
BUCKET_ID: X64_0x9F_3_btfilter_IMAGE_usbhub.sys
Follow-up: MachineOwner
---------0: kd >! devobj fffffa8009d73060
Object Device (fffffa8009d73060) is:
Can not read information from nt shift! ObpInfoMaskToOffset
\Driver\usbhub DriverObject fffffa80094ffa50
Current PRI 00000000 RefCount 2 Type 00000022 Flags 00003040
DevExt fffffa8009d731b0 DevObjExt fffffa8009d73bb0 DevNode fffffa8009d7b550
ExtensionFlags (0 x 00000800)
Unknown flags 0 x 00000800
AttachedDevice (top) fffffa8009663880 * WARNING: unable to verify timestamp for c:\windows\system32\drivers\sptd.sys
ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\sptd.sys
\Driver\ACPI
Queue is not busy.I would say to uninstall the application that has installed the driver c:\windows\system32\drivers\sptd.sys, maybe it is Daemon Tools or Alcohol 120%.
Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 64-bit operating system?" in the following link:
http://www.duplexsecure.com/en/FAQ
Similar question in the following thread:
-
Original title: driver error
They just showed me an error on my computer. I am currently running Windows 8. I was in the middle of games on Steam and my computer randomly gave me a blue screen. He told me that "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys). It restarted and now I'm on that's fine, but I was wondering if there is anything I can do to prevent and what should I do to remove if it's going to be a recurring problem. Thank you.
Here is a list of the help page instructions:«' ' ' Exact error message: DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys)»»» "-Your program and Version: don't know what to put here.-Your operating system and Version Windows 8-Your browser and the Version of Google Chrome Version 28.0.1500.72 m-All soft/hardware you have recently installed or removed - None.-Any recent changes that have been made to the system - None.-What you did to solve the problem of Google there as the error message recommended, read a few results, thought I would ask here.Specification of the computer if necessary:HP - Sleekbook 15.6 ENVY "AMD - processor A10-DDR3 SDRAMWe need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.If you are overclocking stop. (chances are if you are unsure if you are, you are not) aTo allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".The procedure:* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.* Zip up the copy (compress)* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.Link to find out how to download below.To ensure the minidumps are enabled:* Click Start, in the search box, type: sysdm.cpl, press ENTER.* On the Advanced tab, click Startup and recovery... Settings button.* Make sure that automatically restart is unchecked.* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.* OK your way out.* Reboot if changes have been made.Please also run MSinfo32 and download the output as well.To run MSinfo32 please go to start > run > MSinfo32Go to 'file', 'save' and download the PDF is saved with the DMPSystem specs are extremely useful then please include everything you know.
Blue screen view and that crashed are often wrong and should only be used in case of emergency...
You can learn more about BSOD here
Team Zigzag3143.com -
Original title: Windows 7 Home Premium Bluescreen
My laptop crashes after 3-5 minutes of availability and then I get a blue screen
STOP: 0X000000F4I downloaded the minidump here:as well as a log of driverview:TomHi Vashem,
The error STOP: 0x000000F4 can occur for several reasons. There are many reasons why your system may crash because of these screens to stop errors\Blue. The most common scenarios are: faulty drivers, hardware problem (especially RAM). In this case, the issue could be due to the motherboard is heated.
Check firmware and system disk controller BIOS settings are correct and that the storage device has been correctly installed.
Method 1: The problem is possibly due to material of unsupported disk controller. Check if BIOS (Basic Input\Output System) is set to IDE. Enter the BIOS and check the settings. Change the SATA to IDE option (if available). You can view the manual to do the same thing.
Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.
Method 2: Disconnect any external devices from the computer except for the mouse and keyboard and check if that helps.
-
Blue screen stop error message. __
I'm in serious trouble. I use Windows XP service pack 3.
I reloaded the OS after formatting the hard drive. all measures have been taken as advised. I was not able to detect the device that is causing a FALSE START of the windows and then blocking the operating system while I do a lot of work.
The following error report is generated any time well.
BCCode: 1000008e BCP1: C0000005 BCP2: 00000004 BCP3: A699DC68
BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1C:\DOCUME~1\SIDDHA~1\Locals~1\Temp\WER9f80.dir00\Mini020311-01.dmp
C:\DOCUME~1\SIDDHA~1\Locals~1\Temp\WER9f80.dir00\sysdata. XMLHi pays.
You may receive this error message when Windows tries to use incompatible device with Windows XP drivers.
Follow the steps listed in the article mentioned below to solve the problem:
Error message: the system has recovered from a serious problem
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Windows 8 BLUE SCREEN with error message "SYSTEM_SERVICE_ EXEMPTION"
I have a HP Pavilion G6 mobile 2302ax. When I use google chrome, sometimes the screen gets a few grains and suddenly becomes blue. A message appears saying that the system has encountered an error and needs to be rebooted. The error is "SYSTEM_SERVICE_ EXEMPTION".
I use graphs of high performance for execution of google chrome. If anyone has an idea about this problem to my PC, please help.
Hi Dipuab
I hope that my problem is now solved...
Thank you very much for you time, I reaally appreciate it very much.
Kind regards
Greg
-
I get a blue screen with error message when starting
error 0x0000000A (0x00000002, 0x00000001, 0 x 00008000, 0x8050CC18)
http://msdn.Microsoft.com/en-us/library/ff560129(v=vs.85).aspx Hope this helps, Gerry Cornell
-
Hello Hello.
can someone help me why this error is coming.
I use a laptop lenovo.
Error details:
product-windows stytem, operating
ID-1003,
source-system error,
version - 5.2.
sysmbolicname-ER_KRNLCRASH_LOG,
error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
Concerning
Chandra Murali
.net developer,
HYD.
Hi Murali,
· What is the random question?
Try the following.
Method 1: Check for memory questions
Microsoft Online Crash Analysis - windiag
Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.
-
no internet connection, without starting, windows will not open, etc. safe mode goes to the blue screen with the message above.
Usually a terminal problem, IE HD / memory problem
-
I get the above error message and bluescreen when the computer is just sitting idle does nothing. Usually, it's when the internet is open, but not surf. Can someone help me understand this. The graphics card is an Intel 82945 G express shipset family and I checked to see if it is up-to-date and the pilot said he is up to date.
Any help?
Hello
Have you checked Site system manufacturer (manufacturer of custom systems motherboard), then
Intel downloads?After checking the system manufacturer's Site
Intel - Downloads - graphical value and then the other parameters as needed.
http://Downloadcenter.Intel.com/===========================================================
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65--------------------------------------------------------------------------------------------------------------
Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.
You can solve the problems of BIOS by upgrading the version of the system BIOS
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">-->
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
If it received Blue error screen and auto restart past since I did the sp1 update. I have Windows Vista-32 and the error I get is:
Stop: 0x0000008E (0xc0000005, 0x93F042F9, 0X92CD3C50, 0x00000000)
Win32k.sys - address 93F042F9 base at 93E00000, DateStamp 4549aea2
I need help here. I'm going nuts trying to figure this out. I would appreciate your help. Thank you.
Hello
Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
You must identify which exception has been generated.Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Make sure that all new equipment installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. Also, clear or
remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use
Safe mode to rename or to delete the faulty driver. If the driver is used as part of the system startup
Mode process without failure, you must start the computer by using the Recovery Console to access to the
file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the service from the system startup of
using the recovery and then Console by removing the system service file incriminated.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x1E. You can disable the cache in memory of the BIOS to try
to resolve the error. You must also run the diagnostics of equipment, in particular the scanner memory, which
the manufacturer of the system provides. For more information about these procedures, see the owner
Manual for your computer.The error that generates this message may occur after the first reboot during Windows installation or after
The Setup is completed. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For problems during the installation of Windows that are associated with the lack of disk space,
reduce the number of files on the disk drive hard target. Search for and delete temporary files that
you do not have to have, the files hidden Internet, backup application files and .chk files that contain saved
fragments of files on the disc scans. You can also use another drive to hard disk with more free space for the
installation.You can solve the problems of BIOS by upgrading the version of the system BIOS
=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
Displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, drivers particularly video drivers but it
are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Original title: how to find missing or corrupt files on windows xp pro
I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files? My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it
Hello
1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
2 are you able to install any other software?Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.
Step 1: Try to install the webcam software in clean boot state and check.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
Blue screen driver error less than stop: 0x000000D1
Hi everyone-
I get the following error message when you access the Internet (such as randomnly)
Blue screen driver error less than stop: 0x000000D1 (0 x 00000778, 0xF93D8F0F, 0x00000002, 0x00000001) NDIS.sys - address F93D8F0F base at F93C0000, datestamp 41107ec
I have frankly not much idea on why this would happened because I don't use a lot of this computer. I actually erase me just my files and photos and to transfer to a USB port so I could donate to this computer. Anyone has any advice they can share? (I did an error checking and it did not work)
Computer details:
IBM Think Pad R50 series (R51)
Windows XP
Hello
1. have you made changes on the computer recently?
Follow the steps listed in the articles below and check.
Stop error message on a Windows XP-based computer: "STOP 0x000000D1".
http://support.Microsoft.com/kb/916595You receive an error message "STOP 0x000000D1" on a laptop computer Windows XP Service Pack 2
http://support.Microsoft.com/kb/888399I hope this helps.
Maybe you are looking for
-
How can I send an attachment to another recipient in a separate email
I get a lot of attachments that I have to print, scan and attach to another email. I think that there should be a way to simply attach this doc to a new email, I know I could just before all this, but I don't want to follow the original message.
-
Want to 750-124 HP: HP 750-124 power PCI for Geforce GTX 950 video card connection
I oened my HP Envy 750-124 to add a videocard GeForce GTX 950 and 6 pin PCI power cord to power the card could not be found. There is a PCI Express slot present on the motherboard, but no way to connect the power supply Board. So what don't understan
-
Question about promotion nomatterguarantee
"Your device list. Vasile dear Eduard Acrasmaritei,. ............................................ Add a new device Product family phone number model name serial number Date of purchase coverage unemployment Satisfaction guaranteed Date of registratio
-
ThinkVantage Access Connections for Windows 7 (32 bit, 64 bit) - laptops
The download link for version 6.26.79 released 7 February 2016 does not. https://download.Lenovo.com/pccbbs/mobiles/gic779ww.exe
-
Scroll the images at the same time
How to synchronize the picture 2D control scroll bars? Scroll bar Image1 = Image 2 scroll bar (or vice versa)