Similar Questions

• Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)

  Hello

  This is my first post, please have mercy,
  I have a BSD at startup and this is the code that continues to show upward.  System Restore (from system repair and also safe mode) has not solved the teething problems.
  Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)
  I think the code means some sort of failure hardware, is anyway to deduce which device has failed in assessing these codes?
  Please let me know if I'm on the wrong track with a hardware failure, I appreciate all the advice.
  Thank you

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.

  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.

  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  (1) ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) make sure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update of the BIOS of the motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  (6) attempt (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  (7) as the last troubleshooting no invasive steps, perform a reinstallation of Windows 'vanilla': just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) if all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Blue screen AND Google Redirect Virus? STOP code: 0x000000AD (0x00000001, 0x00000000, 0 x 00000006, 0 x 85879410)

  Original title: blue screen of death AND Google Redirect Virus?
  Hey guys! :)

  So last night, my computer has experienced many problems that seem to just get worse and worse.

  It all started with a Google search I did; I must have clicked a bad link or something, because then my computer kept asking me permission to install some kind of .exe file (I don't remember what it's called, but I knew it was sketchy, so I clicked 'Cancel', but the guest has continued to pop up whenever I tried to close.) Then I closed Firefox and the pop - up's order, but then shortly after, a message came up on my screen saying:

  "A problem has been detected and windows has shut down to prevent damage to your computer.
  INTERNAL_POWER_ERROR
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
  etc etc.

  STOP code: 0x000000AD (0x00000001, 0x00000000, 0 x 00000006, 0 x 85879410)

  After research I discovered that I had the unfortunate Blue Screen of Death, which now appears whenever I try to restart my computer.

  I did a system restore to a time before that day, a malware scan using Hitman Pro 3.5 that has detected a bunch of malware that I deleted, but the BSOD persists. Later in the night, I was unable to run the .exe files and kept getting an error message "the dependency service or group could start", but fortunately, this question is left today (or at least for the moment...)

  Apart from this question, I also have the Google redirect Virus, which I think is related to my BSOD problem. I had a few weeks ago and managed successfully to remove it with Hitman Pro but now he's back with a vengeance. I did multiple scans with Hitman Pro with no results, I tried to launch the Device Manager looking TDSSserv.sys with no luck and I'm starting to feel like there is no hope :(

  I'm not extremely proficient in computer science so absolutely any help would be greatly appreciated! I'm also running Windows Vista on a HP Pavilion laptop if this is useful information.

  Thanks again! :)

  Hello

  try this program to remove it

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Blue screen stop: c00002 / a (fatal system error)

  Blue screen stop: c00002 / a (fatal system error)

  the windows login process ended unexpectedly with status 0xc0000005 (0x00000000 0x00000000) the system has been shut down.

  I have dell windows XP home service Pack 3 computer.

  I had a problem with security thinkpoint and called microsoft and after they had me take measures running a couple different scanshttp://live.sunbeltsoftware.com/download VIPRERescue andwww.eset.com virus more microsoft had click me start, run and type in the press temp ok delete all files, run and type prefetch and delete all the files, run %Temp% remove all the files then empty the trash restart and everything should be ok.

  the computer starts fine until I stopped and tried it begins again, same blue screen problem, I went to safe mode and don't start running and temp, prefetch and %Temp% remove empty the Recycle Bin and restart and computer ran fine, after the 2nd screen blue again.

  I'm now working on the computer and if I press start, run make temp, prefetch and % temp % and delete and empty the trash before turn me computer turned off it will start very well, if I don't do the temp, prefetch and %Temp% steps that I will get the blue screen at the start.

  How can I solve this problem and get rid of the blue screen for good message?

  Hi C_O_A_C_H_11,

  Perform the last known good and then restart your computer and check if you receive the error message. You can check the link below:

  How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• A blue screen (Stop error) has been reported. The message contains the error details.

  Hello Hello.
  can someone help me why this error is coming.
  I use a laptop lenovo.
  Error details:
  product-windows stytem, operating
  ID-1003,
  source-system error,
  version - 5.2.
  sysmbolicname-ER_KRNLCRASH_LOG,
  error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

  A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

  Concerning

  Chandra Murali

  .net developer,

  HYD.

  Hi Murali,

  ·         What is the random question?

  Try the following.

  Method 1: Check for memory questions

  Microsoft Online Crash Analysis - windiag

  Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

• Windows xp blue screen stop: 00000024

  Title: original windows xp blue screen

  had a blue screen with stop:

  Hi steveshepherd,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you insert the Windows XP CD?

  You can follow the steps provided by Karena R in the link below, which relate to this issue

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/blue-screen-stop-error-0x00000024-while-booting/196033b0-fbe9-45dd-abbf-889291d0d133

  Kind regards

  Ajay K

• blue screen * STOP 0x0000000A in Windows XP

  blue screen error message: * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) win xp home edition

  Around my house (less than 100 feet I can't use / the view high tower or net - only 'safe mode' whenever I start it (under each variable with or without battery) I get the error message blue screen (see above) - outside of the area of 100 feet, lap top works fine... perfect, starts every time;) HP lap top xp home ed works very well... (I can't use it at home or within 100 feet of my house via especially blue screen message)

  blue screen * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) xp home ed

  You get the following BSOD:

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  Please download the files dmp from the Windows\Minidump on your Skydrive folder (copy the dmp first on your desktop, otherwise you can not download them) and post a link here, so that we can look at landfills. Perhaps we see the cause.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

  I get this on a blue screen stop code and I can't find what this code means someone can help me please v

  00000101 0 x (0 x 0000000000000061, 0 x 0000000000000000, 0xffff98000c6e180, 0 x 0000000000000001

  Best advice I've seen on this error (here: http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 )
  What you are looking for will be in one of the following categories:

  (a) the BIOS bug
  (b) a pilot whose activity is at the origin of the processor target lock
  (c) a defect in hardware (temperature, voltage, dust, RFI, pure and simple borkedness...)? I also wonder about default CPU)
  Therefore, check the drivers
  Then check the inside of the species (temperature, voltage, dust, etc.).
  Then run tests of stress of material

  Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
  Try this free stress test: OSS - GIMPS

  CPU Stress Tests:
  Just do 1 or 2 tests in most circumstances. I have not used one of these tests myself, so I listed everything I could find.
  - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19182&lang=eng
  - http://7byte.com/index.php?page=hotcpu
  - http://www.7byte.com/index.php?page=burnin64
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://www.fossiltoys.com/cpuload.html
  - http://www.pcworld.com/downloads/file/fid, 7146-order, 1 page, 1-c, alldownloads/description.html
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://majorgeeks.com/CPU_Stability_Test_d215.html
  - http://www.xtremesystems.org/forums/showthread.php?t=201670
  -l' or the tests suggested at this link are bootable: http://www.techsupportforum.com/forums/f15/headless-cpu-stress-testing-393435.html#post2232929

  Then try to replace parts.
  Then look for the version of your BIOS to see what changes have been made.

  Text courtesy of http://www.carrona.org/ Usasma

• service pack 2 Installation error blue screen stop 0 x 0000003

  Hello

  I was unable to download the Update Service Pack 2 on my Windows Vista forever.  Get the message every time I start my computer something like "error on blue screen Stop 0 x 0000003.  When I tried to download the 2 means of redress, both gave me the screens that says 'this update not supported'.  How can I fix it?

  Search for updates of hardware of your computer - including the system BIOS manufacturer.  Do not use all facilities built to perform the check - in fact visit the web page of your computer make & model and update the drivers for your system.

  You can also try this:
  How to reset the Windows Update components?

  (Try first the value default - restart and try your download again.  If this does not work - try the aggressive - restart and try your download again.)

• Windows 7 - Crash blue screen - STOP: 0X000000F4

  Hi all

  Windows 7 - Crash blue screen - STOP: 0X000000F4

  Screen shows e blue screen will display the following error code:

  STOP: 0X000000F4 (0XFFFFFA800C4C4B10, 0XFFFFFA800C4C4DF0, 0 X 0000000000000003, 0XFFFFF8000418FE20).
  I tried to restore the mode, the safe & all the option available to start properly.  Given that I have no DVD of windows 7 to re - install windows again.
  My question is as follows:
  -Is - error code says something.
  -A way to re - install windows without CD or DVD or save the image.
  -Also, I can read and access data from the C: & D: drive in cmd in restore mode guest mode.
  Waiting for your suggestions.
  concerning
  Jagdish kone

  Blue_Screen_image_.PDF

  Hi Philippe,.

  Thanks for your reply. I want to reinstall windows on the same SSD. Given that the SSD drive works great as external drive.

  So please could you confirm, how do I reinstall windows again. As I see there are recovery drive comes when I use the SSD as external drive.

  Waiting for your suggestions.

  Concerning

  Jagdish

• window vista boot blue screen stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)

  Cannot start PC, using Windows vista, download blue screen error stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)

  Hello

  1. do you get this error on startup or when working on the computer?

  2. are you aware or any hardware or software changes to the computer?

  Try to start the computer in safe mode and try to make a System Restore.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  In addition, try and run the steps listed in the link below.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly:

  http://support.Microsoft.com/kb/958233

• Blue screen * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

  I have a Hewlett-Packard HP ProBook 4510 s 32-bit with Windows 7 Home Premium and a blue screen appears always * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

  Hello

  Check with the help of HP, their online documentation and drivers, diagnostics and ask
  in their forums about known issues with this model.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =======================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ===============================================================
  
  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Two main causes of these blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See the methods of update driver generic and verify the implementation of driver verifier in the next
  Message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  Make sure you have enough disk space.

  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
  * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue of technical information on the screen Stop: 0x0000007b (0xf79d9528, 0xc000000e, 0x00000000, 0x00000000)

  I can't start my computer beyond the blue screen.  It is said that a problem has been detected and windows has shut down to prevent damage to your computer.  It displays the above technical information.  Help please!   Thank you.

  Hello

  1. have you made changes on the computer recently?

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
  http://support.Microsoft.com/kb/316401

  Try the methods listed in the articles below and check.
  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
  http://support.Microsoft.com/kb/324103

  I hope this helps.

• STOP: 0X0000005C (0X0000010B, 0 X 00000003, 0X00000000, 0X00000000)

  I HAVE THIS BLUE SCREEN ON MY DESKTOP AFTER I UPGRADED TO WINDOWS 7.

  MY PC WORKS FINE WITH WINDOWS XP UNTIL I HAVE INSTALL WINDOWS 7.

  I HAVE CHECK AND RUN THE WIN7 SOFTWARE TO CONFIRM THAT MY OFFICE IS OK TO DO THE UPGRADE, BUT AFTER I PUT IN THE DISK OF WIN 7, THE INTALLATION SEEM TO RUN UNTIL I SEE THE WINDOS LOGO, THE SCREEN TURNS BLUE WITH THE MESSAGE ABOVE.

  I'M TRYING TO INSTALL A FEW TIMES AND GET THE SAME ERROR MESSAGE EVERY TIME.

  PLEASE HELP ME.

  Thank you.

  GHWEE.

  If you have devices not essential connected to the system are trying to disconnect them.

  In addition, you can try to do a custom clean install if your personal files and your settings are saved:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the drive

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link to change your product key

  Enter your product key and use the phone Activation to activate your license. Be sure to explain your situation to the Appeals Officer.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP