Blue screen under windows7 64 bit
Hello.
I love playing games and watching movies on my computer. but now, when I installed windows 7 XP
am I just a blue screen when I run a game or a movie, I can look at a time and then I get the blue screen.
I have used whochrased so I get this:
Sat 12.12.2009 20:49:52 crashed your computer
This was probably caused by the following module: ladfdhp2amd64.sys
Bugcheck code: 0xBE (0x80000001A3E00121, 0xFFFFF880068BD2E0, 0xFFFFF8800446C394, 0xB)
Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
Empty the file: C:\Windows\Minidump\121209-27814-01.dmp
file path: C:\Windows\system32\drivers\ladfdhp2amd64.sys
product: Logitech G35 Headset
company: Logitech
Description: filter DPL2/DHP2 driver
Sat 12.12.2009 18:33:47 crashed your computer
This was probably caused by the following module: ntoskrnl.exe
Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
Empty the file: C:\Windows\Minidump\121209-32588-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
Sat 12.12.2009 18:12:29 crashed your computer
This was probably caused by the following module: usbport.sys
Bugcheck code: 0xD1 (0 x 0 0 x 2, 0 x 0, 0xFFFFF88003E86B40)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Empty the file: C:\Windows\Minidump\121209-35474-01.dmp
file path: C:\Windows\system32\drivers\usbport.sys
product: Operativsystemet Microsoft® Windows®
company: Microsoft Corporation
Description: USB 1.1 & 2.0 portdrivrutin
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
On Fri 11.12.2009 23:36:04 your computer crashed
This was probably caused by the following module: dxgmms1.sys
Bugcheck code: 0xD1 (0 x 0, 2 x 2, 0 x 0, 0xFFFFF8800455ADBD)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Empty the file: C:\Windows\Minidump\121209-27284-01.dmp
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: DirectX Graphics MMS
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
On Fri 11.12.2009 19:39:53 crashed your computer
This was probably caused by the following module: dxgmms1.sys
Bugcheck code: 0xD1 (0 x 2, 0 x 1, 0 x 1, 0xFFFFF8800455AEC4)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Empty the file: C:\Windows\Minidump\121109-20155-01.dmp
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: DirectX Graphics MMS
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
On Fri 11.12.2009 16:08:26 crashed your computer
This was probably caused by the following module: ntoskrnl.exe
Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
Empty the file: C:\Windows\Minidump\121109-21590-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
On Fri 11.12.2009 15:52:47 crashed your computer
This was probably caused by the following module: usbport.sys
Bugcheck code: 0xD1 (0 x 801, 0xFFFFF88003DB953F, 0 x 2, 0 x 1)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Empty the file: C:\Windows\Minidump\121109-23478-01.dmp
file path: C:\Windows\system32\drivers\usbport.sys
product: Operativsystemet Microsoft® Windows®
company: Microsoft Corporation
Description: USB 1.1 & 2.0 portdrivrutin
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
On Fri 11.12.2009 15:46:23 crashed your computer
This was probably caused by the following module: usbaudio.sys
Verification of error code: 0 x 50 (0x0, 0xFFFFF880010C256B, 0xFFFFFA7FA922EC17, 0 x 7)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Empty the file: C:\Windows\Minidump\121109-22604-01.dmp
file path: C:\Windows\system32\drivers\usbaudio.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: USB Audio class driver
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
On Fri 11.12.2009 15:37:56 your computer crashed
This was probably caused by the following module: c:\windows\system32\drivers\eamon.sys
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8800280574B, 0xFFFFF88009579C70, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
Empty the file: C:\Windows\Minidump\121109-23556-01.dmp
file path: C:\Windows\system32\drivers\eamon.sys
product: ESET Smart Security
company: ESET
Description: Amon monitor
On Fri 11.12.2009 15:05:41 your computer crashed
This was probably caused by the following module: material
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88002C3E780, 0xFFFFF880069EEA90, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
Empty the file: C:\Windows\Minidump\121109-25880-01.dmp
14:13:28 on Fri 11.12.2009 crashed your computer
This was probably caused by the following module: ntoskrnl.exe
Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
Empty the file: C:\Windows\Minidump\121109-21637-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
The game 10.12.2009 17:55:14 crashed your computer
This was probably caused by the following module: ladfdhp2amd64.sys
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88003A8CD3F, 0xFFFFF88008818B50, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
Empty the file: C:\Windows\Minidump\121009-32853-01.dmp
file path: C:\Windows\system32\drivers\ladfdhp2amd64.sys
product: Logitech G35 Headset
company: Logitech
Description: filter DPL2/DHP2 driver
The game 10.12.2009 17:48:48 your computer crashed
This was probably caused by the following module: mouclass.sys
Bugcheck code: 0xBE (0x80000001A3E2B121, 0xFFFFF880009B0260, 0xFFFFF880049F025D, 0xA)
Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
Empty the file: C:\Windows\Minidump\121009-30295-01.dmp
file path: C:\Windows\system32\drivers\mouclass.sys
product: Operativsystemet Microsoft® Windows®
company: Microsoft Corporation
Description: Musklassdrivrutin
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
The game 10.12.2009 17:44:31 your computer crashed
This was probably caused by the following module: watchdog.sys
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8800197633F, 0xFFFFF880021AF9E0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
Empty the file: C:\Windows\Minidump\121009-29421-01.dmp
file path: C:\Windows\system32\drivers\watchdog.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: watchdog driver
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
The game 10.12.2009 16:04:27 crashed your computer
This was probably caused by the following module: ntoskrnl.exe
Bugcheck code: 0xD1 (0xFFFFF88058050F58, 0xFFFFF88058050F58, 0x2, 0 x 8)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Empty the file: C:\Windows\Minidump\121009-31168-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
The game 10.12.2009 15:44:39 crashed your computer
This was probably caused by the following module: mouclass.sys
Bugcheck code: 0xBE (0x80000001A3EF2121, 0xFFFFF80000BA22C0, 0xFFFFF88003BB22D0, 0xA)
Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
Empty the file: C:\Windows\Minidump\121009-26691-01.dmp
file path: C:\Windows\system32\drivers\mouclass.sys
product: Operativsystemet Microsoft® Windows®
company: Microsoft Corporation
Description: Musklassdrivrutin
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
10.12.2009 game 14:55:50 your computer crashed
This was probably caused by the following module: dxgmms1.sys
Bugcheck code: 0x1E (0xFFFFFFFF80000003, 0xFFFFFA800520B810, 0xFFFFF88004542F81, 0x0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
Empty the file: C:\Windows\Minidump\121009-23166-01.dmp
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: DirectX Graphics MMS
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
10.12.2009 game 14:17:06 your computer crashed
This was probably caused by the following module: mouclass.sys
Bugcheck code: 0xBE (0x80000001A3F68121, 0xFFFFF88002F222C0, 0xFFFFF88003BEC2D0, 0xA)
Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
Empty the file: C:\Windows\Minidump\121009-21621-01.dmp
file path: C:\Windows\system32\drivers\mouclass.sys
product: Operativsystemet Microsoft® Windows®
company: Microsoft Corporation
Description: Musklassdrivrutin
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
10.12.2009 game 14:06:41 your computer crashed
This was probably caused by the following module: mouhid.sys
Bugcheck code: 0xD1 (0 x 110000, 0xFFFFF880044CD8C2, 0 x 2, 0 x 1)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Empty the file: C:\Windows\Minidump\121009-22854-01.dmp
file path: C:\Windows\system32\drivers\mouhid.sys
product: Operativsystemet Microsoft® Windows®
company: Microsoft Corporation
Description: Filterdrivrutin for HID-mus
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
We sea 9.12.2009 18:01:21 crashed your computer
This was probably caused by the following module: hidparse.sys
Bugcheck code: 0xD1 (0 x 0, 97 x 2, 0 x 1, 0xFFFFF88004E28D42)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Empty the file: C:\Windows\Minidump\120909-29827-01.dmp
file path: C:\Windows\system32\drivers\hidparse.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: Hid Parsing Library
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
We sea 9.12.2009 14:35:59 your computer crashed
This was probably caused by the following module: ntoskrnl.exe
Bug check code: 0 x 101 (0 x 31, 0 x 0, 0xFFFFF88002F63180, 0 x 2)
Error: CLOCK_WATCHDOG_TIMEOUT
Empty the file: C:\Windows\Minidump\120909-248259-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
The accident took place in a standard Microsoft module. Your system setup may be incorrect, perhaps the culprit may be another driver on your system which cannot be identified at this time.
I would like an answer so that I can start playing games I watch movies and do not get a blue screen
I think that the best way to follow this on is to use a test called Driver Verifier tool.
If the tool detects a problem, your machine will crash again. If all goes well with this permit, it will allow you to easily identify the bad driver.
Enable the driver verifier
(1) open a command prompt
(2) type "check/standard/all" (without the quotes)
(3) restart your machine.
(4) use the computer again, until it breaks down (I hope it will be soon :)
After the crash & restart, go to safe mode. http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx
Disable the driver verifier
(1) open a command prompt
(2) type "auditor/Reset" (without the quotes)
(3) restart your machine.
After that you have broken a few times, copy the minidumps on above mentioned same sharing.
Thank you
Mark you want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.
Tags: Windows
Similar Questions
-
Help with error on blue screen under Vista 32 bit
Had this message pop up several times. Any ideas?Thank you!Signature of the problem:Problem event name: BlueScreenOS version: 6.0.6000.2.0.0.768.3Locale ID: 1033More information about the problem:BCCode: feBCP1: 00000008BCP2: 00000006BCP3: 00000001BCP4: 867B 9000OS version: 6_0_6000Service Pack: 0_0Product: 768_1Files helping to describe the problem:C:\Windows\Minidump\Mini122811-01.dmpC:\Users\xxx\AppData\Local\Temp\WER-37955-0.SysData.XMLC:\Users\xxx\AppData\Local\Temp\WERB24D.tmp.version.txtRead our privacy statement:http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Hello
Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
and their forums (if any) for known issues.Check these KB Articles that "pourraient" apply.
Stop 0xFE peripheral sleep or Hibernate with USB streaming output
http://support.Microsoft.com/kb/974303"Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
use some USB AMD EHCI host controllers
http://support.Microsoft.com/kb/982091==================================================================
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65=============================
Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
be a connected USB device and not a system USB device. And you can never really exclude drivers.BCCode: FE 0x000000FE<-- read="" this="">-->
http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order--------------------------------------------------------------------------------------
A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
Special instructions. (Antivirus/antispyware/security programs)----------------------
Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
devices.References to Vista also apply to Windows 7.
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
(can have zero or more than one) and top - right click UNINSTALL.Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USBThis KB shows XP how to and methods of Vista and Windows 7 are the same
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer.
as well as all USB devices that you previously used. Run Options and tick three 1
are there choices to see if any.http://www.NirSoft.NET/utils/usb_devices_view.html
You must remove all instances of the devices and restart.
----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems=======================================
After the above, attach a USB device at a time to see if any cause the issue.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I recently started having blue screens on my 32-bit Windows 7 computer. There is nothing new, other than windows updates. At first I thought it was the Intel graphics driver which I removed. Then, I read something on Skype so I removed that. Always problems. I have the system dump, but can't see where I can download the dump. Thanks for any help.
Associated with the VirtuWDDM.sys LucidInterop Lucidlogix Inc. WDDM driver.
Remove the driver current completely and install the latest driver available. For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 hereIf you continue to plant I would remove Symantec because it often causes this kind of question
-
I get the blue screen on windows 7 64 bit. Can someone tell me what he do to close it from the reference below code?
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
More information about the problem:
BCCode: a
BCP1: FFFFFFFA8059E865
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80003ABC87A
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files helping to describe the problem:
C:\Windows\Minidump\012616-16224-01.dmp
C:\Users\gmorton\AppData\Local\Temp\WER-96112-0.SysData.XML
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
Best regards
Vishnu
Hello
You can also check out this link that talks about troubleshooting stop errors (blue screen) in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
-
0x00006b blue screen windows 7 32 bit
I have problem with my computer. Blue screen when I start my computer. I need help please
It happens all the time when I restart my computer, and I need to restore my computer to a previous date and lost all information and files that I saved before.
Error code: 0x00006b
you will find the my computer information in the link
http://ImageShack.us/f/707/52249198.PNG/
Help, please
What should I do now? *^*
I uninstalled TuneUp Utilities 2012, and I changed the setting as you said. It does not work normally. Thank you very much. I appreciate your efforts. Thanks again.
-
application of 32-bit under windows7 64 bit
one of my 32-bit application does not work in windows 7 64 bit os
Check with Samsung to see if there is a 64-bit compatible version of the software. They should be able to help with this question.
Thank you
Marilyn
-
Error on blue screen Windows 7-64 bit ultimate version
Hello
I got bluescreen error very often on my computer.
The error code is IRQL_GT_ZERO_AT_SYSTEM_SERVICE
The dmp file are attached.
https://onedrive.live.com/redir?RESID=1C4F6FD3EF23B007! 175 & authkey =! AB5iyvrzUeUWfus&ithint=file%2c.zip
Please give me idea what to do with this issue.
They were related to the corruption of memory (I suspect Kaspersky) Please run the Driver Verifier to confirm
Please run this test to find out which driver is causing the problem.
If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
Driver Verifier (for full instructions, see our wiki here)Co-written by JMH3143 -
SXC-1080 Modem CDMA does not not under windows7 64 bit
Driver software not installing device do not.
Please help me...Hello
As the software could not be installed as compatibility mode, I suggest you to contact the manufacturer for help with this issue.
-
Blue Screen Error MODULE_NAME: Ntfs
I have a few BSOD that appear from time to time and I do not understand the minidump files.
My minidumps can be found at:
https://onedrive.live.com/?ID=13511480866954F4! 135 & cid = 13511480866954F4
Any help would be appreciated. Thank you very much.
Hello.Bugcheck 1E, {ffffffffc0000005, fffff80002d7daf5, 0, ffffffffffffffff}
Probably caused by: memory_corruption (nt! MmCreateSection + 395)
Error checking 24, {fffff88002811e78, fffff880028116d0, 1904fb, fffff80002aa88de}Probably caused by: ntkrnlmp.exe (nt! CcUninitializeCacheMap + this)
Bugcheck 3B {c0000005, fffff80002a902a5, fffff88004628f40, 0}Probably caused by: ntkrnlmp.exe (nt! KiSystemServiceHandler + 7 c)Ntkrnlmp.exe is a component of Windows which mean than anything else that the leads in
Fault.BiosVersion = F10e DS
BiosReleaseDate = 01/04/2009
SystemManufacturer = DataLogic
SystemProductName = G31M-S2L
BaseBoardManufacturer is Gigabyte Technology Co., Ltd..
BaseBoardProduct = G31M-S2L1. check with Support Gigabit, their documentation and online drivers. Update the
BIOS, drivers from the chipset and drivers of major on-board and separate devices (see pilot
Update methods below). Also check for later versions at Intel and the other device
tea.Support for Gigabyte
http://www.gigabyte.com/support-downloads/technical-support.aspxGigabyte Downloads
http://www.gigabyte.com/support-Downloads/Download-Center.aspxFor the Intel driver update utility<-- run="" this="" after="" checking="" with="">-->
http://www.Intel.com/p/en_US/support/detect?redirector_count=1&Intel Download Center
http://Downloadcenter.Intel.com/Intel - Support
http://www.Intel.com/p/en_US/support
Intel - community and Forums
http://www.Intel.com/content/www/us/en/blogs-communities-social.html------------------------------
Avast has been executed in two events of BSOD and can cause instability.
2 uninstall Avast and running of its removal tool to avoid leftovers. MSE - free use
instead.
MSE - free
http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download3 check memory very carefully (see memory test methods below).
4 use ALL other methods in the troubleshooters below if necessary.
5 if necessary run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier
methods below.====================================
Resolve errors stop (blue screen) under Windows 7 - has a section for them if you can
or are unable to start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7====================================
BCCode: 24 0 x 00000024
Remove ALL power and reconnect the cables (at both ends, memory and cards)
When possible) - in fact, remove and replace - do not just tight.The main cause of this Bug_Check is disk emits however it can be caused
problems of memory and same antispyware/antivirus/security programs.-----------------------------------
BCCode: 24 0 x 00000024
http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html? order = votesBug Check 0 x 24: NTFS_FILE_SYSTEM
https://msdn.Microsoft.com/en-us/library/ff557433%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396====================================
BCCode: 1st 0x0000001E
Remove ALL power and reinstall all the memory cards and cables (both ends when)
possible) - in fact, remove and replace - do not just tight. Those who are for a PC and on what is possible for a laptop is reinstall the memory and clear the vents. Make sure BIOS, drivers from the chipset of low level and main device drivers are all to date by check manually at the sites of the manufacturers.Bluescreens many are caused by the BIOS, chipset of low level drivers and other major drivers that are not the latest, even if the computer is new. Following the link manually check updates using the methods of updates as indicated in the resolution of the problems.
BCCode: 1st 0x0000001E
Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED
BCCode: 1st 0x0000001E<-- read="" this="">-->
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-Bug_Check 0x1E - read link for the example
http://msdn.Microsoft.com/en-us/library/ff557408 (v = vs. 85) .aspx====================================
BCCode: 3B 0x0000003b
BCCode: 3B 0x0000003b<-- read="" this="">-->
http://www.faultwire.com/solutions-fatal_error/system-service-exception-0x0000003B-* 1074.htmlBug Check 0x3B: SYSTEM_SERVICE_EXCEPTION<-- read="" this="">-->
https://msdn.Microsoft.com/en-us/library/ff558949%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396====================================
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpYou can disable the driver verifier
http://support.Microsoft.com/kb/244617Start - type in the box search-> auditor/Reset hit enter to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.
If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.
----------------------------------------------------------
References to Vista also apply to Windows 7.
It's my generic how updates of appropriate driver: (look for the BIOS and driver
updates.)This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd partywith their own software and drivers and other major device drivers, you have.
Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to turn off the pilot facilities in Windows updates, that leaves is to Windows Update, but it will not install the drivers who are generally older and cause problems. If updates offers a new driver and then hide it (right click on it), then go get new ones manually if you wish.
How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967
==========================================Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor the Windows Memory Diagnostic tool.
Start - type in the search-> memory box - find top - right click - Memory Diagnostics tool follow RUN AS ADMIN instructions
Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.htmlI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
MANY blue screens - no. Dumps and for different reasons
I am running Windows 7 Ultimate SP1 - x 64
My startup and recovery settings are set up right:
Write an event to the log system - verified
Automatically - restart disabled
Image partial memory (256 KB)
Directory: %SystemRoot%\Minidump
Error Reporting Service - running and set to automatic
I got all blue screens under the Sun, Ntfs.sys does not, LeAPC_INDEX_MISMATCHErreur, IRQL_NOT_LESS_OR_EQUAL, BAD_POOL_HEADER, MEMORY_MANAGEMENT (the most common), REFERENCE_BY_POINTER, PFN_LIST_CORRUPT, and more, it's just at a glance down the list Bug Check Code reference
Whenever this happens, no minidumps are created in C:\Windows\Minidump, even after reinstalling Windows. Almost all parts of my PC has been replaced since it started, except the hard drive, CPU, optical drive Bay hard drive and 2 sticks of ram on 4.
I'm sure that it is not overheating, that my temperature control it ever close to overheating, even when it bluescreens. And I replaced the power supply with no luck, so I guess this isn't a power failure.
I made the disk, the controller memory, and System File Checker check without operating
It makes me crazy, any help would be appreciated, thanks
If the minidumps are still not created, check these reasons as to why that may happen
For discharges to be product what follows must be correct
Paging file must be on the same drive as your operating system
The basic file size must be greater than the physical RAM installed
Windows Error Reporting (WER) system service must be set to MANUAL
Value file system run on the operating system drive
The value of options/crash recovery system "kernel memory dump".
User account control must be running.
Sometimes the SSDS with an older firmware are not DMP (firmware update)
Applications like Ccleaner cleaner remove DMP files to avoid them until you're fixed.
Please read this wiki to know how to find and download your Event Viewer logs
-
Blue screen error 0x0000009F Windows7, 32-bit, sp1.
(0 x 00000003, 0 86953030, 0x83564AE0, 0 x 85621740).Windows7, 32-bit, sp1. After a long time trying torestart due to very slow performance issues, I copied everythingthe info, find where I put it is another problem. think :-/I had the same problem as my computer. is it possiblea virus of a machine, I'm sorry very tired. all ideasPlease, I beg you. If more information is needed I'll find it. There is athing that could be a help, a problem persisting, I have somedate certificates, when user account control asking permission todifferent applications open, about 50% have been exceeded. whichwent up to 15% prob, but my ISP is always up to date. I havedon't know if this is important whenever I boot my desktop computerHe's trying to load drivers for improved storage of Microsoft WPDcertificate & device password but fails every time. But usingPiriform Speccy shows install them?. A soon for the time being, cordroyHi Cordroy,
You have installed any third-party antivirus on the computer protection software?
To resolve the blue screen issue, follow these methods:
Method 1:
See the article and check if that helps:
Stop error "0x0000009F" in Windows 7 or in Windows Server 2008 R2 when the computer enters or leaves soft power off (S5) power state
http://support.Microsoft.com/kb/2459268
Method 2:
I suggest you to refer to the article and see if it helps:
Resolve stop (blue screen) error in Windows 7
Note: when running chkdsk on the drive hard if bad sectors are found, it tries to repair this sector and if all the available data may be lost.
Method 3:
Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Hello world
In recent months, I use a 8570w Elitebook.
I can't tell you when the problem started, but as soon as I unplug the notebook from the power supply and WLAN is enabled, I get a blue screen after a while. Sometimes, but not this oftehn, I encounter this problem even when the laptop is connected to the power and WLAN is enabled.
I could not determine when exactly this blue screen, but it's certainly the WLAN (Bluetooth is disabled in the BIOS for the moment). It happens most of the time when I'm under two or more virtual machines with VMWare Workstation (version 9.0.2).
The WIFI card is an Intel Centrino Advanced - N 6205. I tried several drivers (mid-2012 at the latest in April 2013) with a complete uninstall of the previous drivers. Without success. Operating system is Win 7 SP1 64 bit.
Google helped me a bit and I found an Intel forum where people are describing almost the same problem with these Intel WLAN modules.
Checked the Knowledge Base of HP and I am just find more messages do not deal with the new modules.
Should I consider replacing the WLAN (guarantee) card? Someone knows the same issue and was able to find a solution/workaround?
All opinions are appreciated.
Thank you
JerryHello world
Finally, I have launched the Intel WLAN module and replaced by a Broadcom module (HP spare part number: 669832-001, Broadcom model: BCM943228HM4L) with the driver version: 6.30.223.228 (05.02.2014).
This solved my problem of blue screen. Intel (same as last) drivers do not work with the configuration I have on my Elitebook 8570w and I gave up to find an another software/driver associated solution. In recent weeks, I can run multiple virtual machines in VMWare (9.0.4) without problems.
Hope this information is of help to anyone who is struggeling with the Intel Centrino Advanced-N 6205 WLAN module.
Cheers, Jerry
-
My computer is
Intel Core i7 860 @ 2.80GHz processorInstalled RAM 8 Gb (usable 3.24) - G.SKILL RIPJAWS, DDR3 1600 GB PC3-12800 2 x 4 sticks.System type: 64-bitMotherboard: ASUSTek Comp Inc. Model: P7P55D
BIOS Date: 2009-12-07 Ver: 08.00.15Operating system: Windows7 Professional 64-bit Service Pack 1
GeForce GTX 275Tried "Remapping ACTIVE" in BIOS > tab advanced, then restarted and the system was fine and kicked + 100%(Checked system properties - display of 8 GB of RAM installed perfectly usable)then stop. Then restarted the system, but after the system attempts to restart I get "Blue Screen of Death" - unstable system and "Dumping Memory. So now, he is off again.Necessary assistance in this regard, been looking for solution for a while.Dear Gerry,
I think I solved my problem.
I have reset the motherboard and CMOS by removing the battery.
I now get on my system properties
-installed memory 8Gb and (usable 6.99)Thanks for your help once again.
-
P2V Windows 7 64-bit blue screens with 7 b
Hi all
I found this link on the forum http://sanbarrow.com/p2v2008r2.html#patching
and I followed it to the letter. But still my blue screens Vm.
What I don't understand, is that you need to load some keys. Cheange it and then to unload these same keys that you just changed. How to forge that fix anything?
Also, the "button" is 0. But the 'type', it is 1 so I changed to 0, but still, I get the blue screen
I also tried the 5 converter that comes with workstation 8 and I get the same result. I've done a P2V of my Dell Precision M6500.
I have been struggeling with this for about 4 days now and I'm not a happy camper.
Please sombody can help.
Kind regards.
Jaco.
Here's the VMX file.
. Encoding = "windows-1252".
config.version = '8 '.
virtualHW.version = '8 '.
numvcpus = '8 '.
cpuid.coresPerSocket = '8 '.
scsi0. Present = 'TRUE '.
scsi0.virtualDev = "lsisas1068".
memsize = "4096".
MEM.hotadd = 'TRUE '.
scsi0:0. Present = 'TRUE '.
scsi0:0. FileName = "J:\Virtual Machines\Laptop\JFOURIE-NB1-0.vmdk".
IDE1:0. Present = 'TRUE '.
IDE1:0. AutoDetect = 'TRUE '.
IDE1:0. DeviceType = "cdrom-image".
floppy0.startConnected = "FALSE".
floppy0. FileName = "".
floppy0. AutoDetect = 'TRUE '.
ethernet0. Present = 'TRUE '.
ethernet0.virtualDev = "e1000".
ethernet0.wakeOnPcktRcv = "FALSE".
ethernet0. AddressType = 'generated '.
USB. Present = 'TRUE '.
EHCI. Present = 'TRUE '.
Sound.Present = 'TRUE '.
sound.virtualDev = 'hdaudio '.
sound.fileName = "-1".
Sound.AutoDetect = "TRUE".
MKS. Enable3D = 'TRUE '.
Serial0.present = 'TRUE '.
Serial0.FileType = "thinprint".
pciBridge0.present = 'TRUE '.
pciBridge4.present = 'TRUE '.
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = '8 '.
pciBridge5.present = 'TRUE '.
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = '8 '.
pciBridge6.present = 'TRUE '.
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = '8 '.
pciBridge7.present = 'TRUE '.
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = '8 '.
vmci0. Present = 'TRUE '.
hpet0. Present = 'TRUE '.
usb.vbluetooth.startConnected = 'TRUE '.
displayName = "Laptop 2011"
guestOS = "windows7-64.
NVRAM = "computer laptop 2011.nvram.
virtualHW.productCompatibility = "hosted".
powerType.powerOff = "hard."
powerType.powerOn = "hard."
powerType.suspend = "hard."
powerType.reset = "hard."
extendedConfigFile = '2011.vmxf of the laptop.
scsi0:1.present = 'TRUE '.
scsi0:1.filename = "JFOURIE-NB1 - 1.vmdk.
ethernet0.generatedAddress = "00: 0C: 29:60:f4:c4.
vmci0.ID = "274789572".
UUID. Location = "56 4 d fc 5th 4A 39 - cc 4f 4 c 10 60 f4 c4 c7 f0 f6.
UUID. BIOS = "56 4 d fc 5th 4A 39 - cc 4f 4 c 10 60 f4 c4 c7 f0 f6.
cleanShutdown = 'TRUE '.
Replay.Supported = "FALSE".
Replay.FileName = «»
scsi0:0. Redo = «»
scsi0:1.redo = «»
pciBridge0.pciSlotNumber = "17".
pciBridge4.pciSlotNumber = "21".
pciBridge5.pciSlotNumber = "22".
pciBridge6.pciSlotNumber = "23".
pciBridge7.pciSlotNumber = "24".
scsi0.pciSlotNumber = "160".
usb.pciSlotNumber = "32".
ethernet0.pciSlotNumber = "33".
sound.pciSlotNumber = "34".
ehci.pciSlotNumber = "35".
vmci0.pciSlotNumber = '36 '.
scsi0.sasWWID = '50 05 05 6th 4 a f6 f0 30'
USB:1.present = 'TRUE '.
ethernet0.generatedAddressOffset = '0 '.
vmotion.checkpointFBSize = "134217728.
USB:1.speed = '2 '.
USB:1.DeviceType = "hub".
USB:1.port = "1".
USB:1.parent = "-1".
IDE1:0. FileName = "D:\Downloads\Windows 7 64-bit recovery Disc.iso"
tools.remindInstall = 'TRUE '.
USB:0. Present = 'TRUE '.
USB:0. DeviceType = 'hidden '.
USB:0.port = "0".
USB:0.parent = "-1".This means controlset001 which should be ok
If you send me a PM of immeditaly now with a teamviewer ID 5 and go I could help
-
Satellite L850D blue screen towers using Corel Draw X 5 under Win 8
As in the title, whenever I move an object (or click on the background) in CorelDraw X 5 running under widows 8, the screen goes blue when I release the object that it becomes normal.
I also hooked up a different monitor and it is mirrored there.
The laptop is brand new. I had a lot of trouble installing corel from the CD and had to copy the files on my HARD drive and install the program from there. I get a message of inconsistency when you start Corel.Although it seems to work OK except this blue screen problem. It is a transparent blue.
It is not really possible to use the program in these conditions.
What is a graphics driver issue. ?I have Corel working to High Performance on the switchable graphics card.
> I am getting an incompatibility when Corel starting
In my opinion, you are using a (Corel) application that is probably not completely compatible with Windows 8 System.
I recommend you to check the page developer Corel for more information on the use of such software under the new system to win 8.
Maybe you are looking for
-
The top of my Firefox window is transparent: how to change that?
I just returned from a trip and the top of my Firefox window is now transparent. I looked online for a solution, but none of the answers worked. I went to customize as many of the suggestions offered, but none of it options here after work. I have Wi
-
How can I LOCK you your desktop in place icons so that they DO NOT moving whenever I REBOOT or POWERUP?
-
tvwizard2ft.exe I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.
-
List of unsupported of functions have RT part of CompactRIO
Hello Each day begins with a function not supported by the party of the CompactRIO RT (secondary, the UI event, properties). I was wondering if there is a list of these unsupported function, so I can spend less time to change and change my program ag
-
Unable to connect to wireless internet at home and cannot renew IP address
Here's the question: I have a few years old Toshiba Satelite laptop with Windows XP SP3. I recently took my office where he has been on the internet via an ethernet cable in the living room where I tried to connect to my wireless internet. It would c