SXC-1080 Modem CDMA does not not under windows7 64 bit

Similar Questions

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Satellite P10 824: modem driver does not install

  I have a tosiba Satellite P10 824 and the modem driver not install what can I do? This page driver is installed but the modem does not work.

  Hi Cienciala

  If the reader is already installed and the modem is correctly listed in the Device Manager, do not try to install it again and again. I advise to enter the properties of the modem in the device and on the diagnosis tab Manager list, you can use Query modem and verify the results.

  If the modem does not work it may also be the configuration dial problem.
  By the way there is also a useful site, you can check http://support.toshiba-tro.de/kb0/FAQ35006G000UR01.htm

• F380 printer with a USB modem / router does not work as a scanner

  Hello, I have a Hp F380 printer I've always used on my PC, in Windows 7, via the USB port.

  Given the need to print and scan from another PC on the same router modem, I tried to use the USB port master who is mounted on my modem router (Alice Gate VoIP 2 Plus Wi Fi), to which I have connected the F380 to share with the new PC.

  I followed the steps in the manual installation of the modem and everything was fine except for the use of the scanner.
  The scanner, you can not use because the HP Solution Center does not see the device if it is connected to a USB port on the local PC (I normally, I used this for my scans)

  Even try to use scanning directly from the "devices and printers", click the right button of the mouse over the device icon in the menu window F380 does not appear the scanning features that appear in the place when the F380 is connected to a USB port on the local pC.
  I also tried to analyse using paint, Windows live photo gallery and scanner and fax in Windows, but the problem is always the same: the scanner is not detected.

  Do you have a solution for this?

  Thank you very much

  Hello

  The scanner cannot be access via a shared printer. The printer must be connected directly to the device, or you must connect using a standard network connection.

• Satellite Pro S300 - F3507G modem 3G does not work

  My Toshiba S300 Pro has a built-in 3G card (sony ericsson F3507g).

  I have just updated the firmware from R1D06 and shortly after the startet LED to change.
  Now when I turn on the 3G card, the blue light flashes once every two secconds and it also runs on the Wifi light, even thoug Wifi is disabled.

  The light does not change when it is connected, always the same Flash.
  And the Wireless Manager seems to lose its connection to the card and says it is not connected, even thoug it's on and internet works. Sometimes there is no blue led, and saw that it works correctly once, this is not always the same behavior.

  Connection is good, thoug disconnection a lot and sometimes windows uninstalls the material.

  I would like to try downgrading the firmware again but can't find it on the on the net anywhwere, but do not know if my card is defective or not.
  Toshiba europe has a support email?

  Can't find that either.

  Hello

  Unfortunately I can't help you with this issue, but on the Toshiba download pages when a new update is available the old one disappears from the list and just one is available.
  It is the same with the BIOS updates.

  If you need advice or assistance may contact nearest Toshiba authorized maintainer.
  They have access to the database of Toshiba and they can get for you older version of the firmware.
  Talk with them. I don't know that they can help you with this.

• Z500: Samsung 840 evo does not (under windows)

  Hello

  I replaced the build-in the hard drive in my Ideapad Z500 with a brand new Samsung 840 evo and tried to install Windows 8.1 on it.

  (I also replaced the dvd player with a hard drive caddy, where I put the old hdd)

  Unfortunately, I can't install windows.

  Whenever I try to format the primary partition, nothing happens for about 3 minutes, and then he throws the error code 0 x 80070057 "unable to create partition" (actual description is in German)

  When I boot from the old hdd and try to format the SSD inside windows, it does not either.

  Magician tells me, everything is fine with the ssd, but it cannot perform all tests, because there is no volume

  SATA controller mode is AHCI.

  Boot mode is UEFI.

  Here's what I've tried:

  -In installation: diskpart-> disk list-> select disk-> own-> convert gpt-> exit (exits without errors)

  -Manual partitioning with parted magic

  Someone at - it an idea that doesn't require you to disassemble the laptop new? That's what I want to only try if all else fails. I was very careful when you replace the readers and did not notice any physical damage, suspicious sounds, etc.

  
  

• Does not, how I update BITS?

  I reinstalled IE8, after which the Windows updates did not work and I got error 0 x 80070424. (XP SP3)

  I have re installed SP3, but this does not solve it.

  I tried the FIXIT suggested by David Vinod

  (http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/updates-continue-to-pop-up-but-cannot-download-no/73ccc5a1-64c1-4ffe-90be-32e4c7c93bbd)

  but this is a no cure.

  My latest updates have been in November 2012, nothing since. Any ideas how to fix?

  This Microsoft hotfix fix 50687 allowed me to download the updates, but they wouldn't install.

  (BITS is re appeared under Services)

  Microsoft Update does not store my update history, so he re scan each visit.

  These were not installed:

  Update for Windows XP (KB946648) security
  Update security for Windows XP (KB2510531)
  Microsoft Office Compatibility Pack Service Pack 3 (SP3)
  Update security for Windows XP (KB2758857)
  Update security for Windows XP (KB2770660)
  Update for Windows XP (KB2779562)
  Update security for Windows XP (KB2753842)
  Update for Windows XP and Windows Server 2003 (KB2798897)
  Update security for Windows XP (KB2802968)
  Update security for Windows XP (KB2780091)
  Update security for Windows XP (KB2807986)
  Update security for Windows XP (KB2820917)
  Update security for Windows XP (KB2813170)
  Update security for Windows XP (KB2813345)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2817183)
  Update security for Windows XP (KB2808735)
  Windows Malicious Software Removal Tool - April 2013 (KB890830)

  Ko 2757638, which I installed it manually, has not been downloaded or installed.

  I downloaded and run Microsoft Fix It Center (21 patches) and this explains that the problem has been corrected. WELL WELL, IT IS FALSE. The problem persists.

  But the power down of all installed updates then maybe it's fixed. I'll report later.

  Hi, pawn,

  Please restore the computer and when you receive the prompt to install the nvidia update, please hide and it woun't install. Here are the steps:
   
  To hide updates:
   
  (a) click Start, type: Windows Update in run
  (b) press on enter on your keyboard
  (c) a list of the updates
  (d) right-click in the update/s in question and click Hide.
   
  Update the adapter driver video directly from the Nvidia site.
  http://www.nvidia.com/page/support.html
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.

• Download link for first 12 items does not offer English 64 bit

  I'm in the middle of a project to import, and my 12 items has become corrupt because I uninstalled Photoshop elements 12.  I need to download 12 EP recorded, under license, paid for but the link I found (products download Premiere Elements | 10, 11 and 12) does not appear to offer it in English?

  Is there somewhere else?

  timmyleeturner

  What operating system is involved? And, did you buy the 12 elements of Adobe's first direct?

  If you have purchased from Adobe directly, you should be able to get a new set of installation from the web site of Adobe files 'my orders '.

  Have you been there and done that?

  When you do this, you need to download two files, the exe (the smallest file, Adobe Download Assistant) and the .7z file (the larger file, one for the program itself). You need both. The smallest is Adobe Download Assistant. There may be more than one set of files to select from Adobe. If you have

  Windows 7, 8 or 8.1 64 bit, you want to make sure that you see "64-bit" somewhere in the title of the files you select to download.

  Once these files on the computer, follow the instructions, if you have not configured for automatic opening of the 7z file.

  If problems, please post again with more details.

  Thank you.

  RTA

• I have Ellis Mega Bible Library 6 version which ran on 32-bit, but does not load on 64-bit.

  This program does not load and the message that I said that I must have 32-bit system. I have 64. All solutions?

  Hello

  Please see the link below for results of compatibility:

  http://Windows.Microsoft.com/en-AU/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Also, check the link below for more information.

  http://Windows.Microsoft.com/en-us/Windows7/understanding-hardware-and-software-for-64-bit-Windows

  Hope the helps of information.

• Adobe Flash Player does not work for 64-bit browser

  If Adobe Flash Player does not work for a 64-bit browser, they should stop the company, because if it doesn't work why bother to use it, I'm good?

  1. use a 32-bit browser
  2 install 64-bit of beta from labs.adobe.com
  3 wait for the release of the 64-bit version of Adobe

  'Maryam Ziad' wrote in the new message: * e-mail address is removed from the privacy... *

  If Adobe Flash Player does not work for a 64-bit browser, they should stop the company, because if it doesn't work why bother to use it, I'm good?

• Bought Windows 64 bits but hotel does not work on 64-bit

  I needed a 32-bit Windows 7 for my client of the hotel lock software installation, unfortunately, HP distributor misled me into buying 64-bit instead of 32 bit.
  The software does not run on the 64-bit and 32-bit and the Distributor is unwilling to change the system for me.
  What should I do to install this driver on the 64-bit or change the 64 bit to 32 bit?
  Thank you

  If you install virtual Windows XP, you can install your software in this environment, virtualwinxp emule Windows XP 32-bit

• MP3-Info Extension (MP3Ext) does not not with Windows7 64 Bit

  Does anyone know why Extension MP3-Info (MP3Ext) does not work with Windows7 64 bit. I heard, that it works as expected with Windows7 32 bit, but I have only the 64-bit Version of Windows, so I can't check it out.

  In Windows 7 64 bits of the program can be installed, but the PropertyPage, icon Manager, and tooltips don't work.

  MP3Ext is an extension for Windows Explorer.

  It is a freeware program and can be downloaded with the source code in C++ here: http://www.mutschler.de/mp3ext/

  I'm not a C++ programmer, so the source code does not help me. But maybe someone can look at the code and can finally say, what's the problem.

  Help, please

  Alfg

  @uDJinGrey,

  I think you're wrong. At least for Windows 7 64 bit.

  You wrote: "go to windows Explorer, go to any mp3 file and right-click on it, then click Properties.

  "It should be a mp3-info tab, click on that.

  but there is no mp3-info tab .

  What you wrote is true for Windows 7 32 bit.

  The only solution is to recompile the Extension Mp3-Info (MP3Ext) with a 64-bit compiler C ++.

  The reason is that Windows Explorer is a 64-bit application and it cannot use the 32-bit dll from Extension Mp3-Info.

• "" File to error message "does not contain a 32-bit software" what xerox workcentre pe220 installation' pilot

  Original title: xerox workcentre pe220'drive does not work

  I need help. I downloaded xerox workcentre pe220' 32-bit disk. When I try to install, it's been declined (Advisor: folder does not contain software for 32-bit)

  I use windows 7 ultimate 32 bit.

  Could you help me?

  Thank you

  Liana Almeida

  my email: * e-mail address is removed from the privacy *.

  or * address email is removed from the privacy *.

  Hello

  Follow the steps below and check.

  a: Right-click the installation file.

  b: then select run as administrator.

  Hope this information helps.