Blue screen when I start my pc

Similar Questions

• PowerMac G5 stuck on blue screen when it starts up

  Hello everyone,

  I have a PowerMac G5 (1.8 Ghz, 1.25 GB RAM 10.5.8 Leopard)

  If I turn on the machine it starts normally with the apple logo and the spinning wheel

  but when you have completed it sticks on the blue screen that you see before the connection menu.

  I don't know what to do,

  I hope to hear soon.

  Greetings, Rick

  Hey, Rick, start with this & let us know the result please.

  If 10.7.0 or later...

  Start with CMD + r or the Option/alt key to boot from the recovery partition & use utility disk from there to repair the disk, and then repair permissions.

• Driver IRQL not less or equal appears on the blue screen when you start Paintshop Pro X 2

  I've been running Paintshop ProX2 6 months using Vista Home Premium and suddenly, whenever I try to start the program, the dreaded blue screen appears and the first line of the text is as shown above. Can someone explain this and help me to recover using the application? This does not happen with any other application as far as I can see, including another program of digital imaging Photoshop Elements 6.

  Hello

  As the application works fine in safe mode, it would take a few conflicts between the third-party applications. Perform a clean boot and see for the third-party application that may be causing the problem.

  http://support.Microsoft.com/kb/929135

  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• I get a blue screen when XP starts

  I tried to repair the operating system with the boot CD, but still the same error.

  I try to record the requests on the boot drive and would greatly appreciate a solution or advice.

  ERROR RECEIVED: Stop: 0X0000007E (0XC0000005, 0XBA308750, 0XBA4DF42C, 0XBA4DF128)

  Your CD of Windows XP - what level of service pack is this?

• Why my computer is being a "blue screen" when not in use (can be started Windows 7 very easy) why the blue screen?

  How to stop the computer to go to "blue screen" when not in use. In other words, how can we not shut down the computer for a ~ 10 hours?

  Arthur

  Please keep all your messages on the same topic in the same thread / conversation.

  Click on the following link to access your profile

  http://answers.Microsoft.com/en-us/profile/798d7b71-764c-E011-8dfc-68b599b31bf5

  Click Edit profile and check the box in front of notification by e-mail.

  A suggestion if you are using Internet Explorer 9, 10 or 11.

  Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz

  Hi, I was wondering if I need different software or?   Tent for upgrade achieve performance more than one old computer.   When I turn on the computer, it starts to initialize, then turns on the blue screen, all new material that was added.   3.6 GHz was also used in the 650's.  Just by looking at the cpu they look the same to me.  Any ideas is better than what I have now.   Dell number is 4QXB451

  This isn't the site for these answers... Try intel.com/support/cpu

  Youre pc requirments are based on the chipset boards, chips intel only run with

  the default CPU.

• Get a blue screen when loging to AOL. How can I fix?

  Original title:

  Get a blue screen when loging to AOL. How can I fix?

  blue screen when I try to open aol why is what is happening, that it only happens when I try to open aol

  Internet explore is fine

  Hello

  1. did you of recent changes to the system before the show?

  2. do you get an error message?

  3. do you have security software installed on your system?

  Method 1:

  Follow the link below, start in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the issue is fixed in SafeMode with networking, I suggest you perform a clean boot and check if it helps.

  Method 2: Perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 3:

  Follow the link below, check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7   (Applies to Windows Vista)

  In addition, check out the link below and check if it helps.

  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=223529

  Let us know if it helps.

• I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  After starting my Windows I got these message below

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.256.6
  Locale ID: 2052

  More information about the problem:
  BCCode: a
  BCP1: 00000000
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 82E9837B
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini041011-01.dmp
  C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
  C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt

  
  C:\Windows\Minidump\Mini041011-01.dmp

  View your dump using file:
  BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  For each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.

• Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please

  Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• Satellite P200D-12f PSPBQE - blue screen when waking up from sleep

  Hello again!

  I feel blue screen problems when I close my laptop and open it again (while he wakes up).
  It says something about Ati blah blah.

  I find that very annoying reseting every time the PC cuz he went to sleep... any1 has / had similar problems?

  What can I do about it? I had b4 of win xp on my laptop (toshiba don't support even xp for this model) and it worked perfectly, even not a problem... and now with win 7 I have millions of problems and win7 is supported!

  > I feel some problems blue screen when I close my laptop and open it again (while he wakes up).
  > It says something about Ati blah blah.

  Blabla ATI means that the BSOD is related to the ATI graphics card chip or graphics card installed driver.

  If Win XP worked perfectly, then the problem must be caused by software installed. Maybe the graphics driver...

  I recommend the update driver graphics card and if necessary, update the BIOS.

• Get the blue screen when you create a new message or the response message in OWA Exchange 2007

  Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

  It will be useful.

• Blue screen when you unplug the power of the computer dell laptop XP

  I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

  Hello suncoastsrq,

  Usually, when we see problems during shutdown, the cause is something that loads at startup.

  To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

  You can download the dump Auggy's previous suggestion?

  Let us know.

  Best regards

  Matthew_Ha

• 2 Ihave rundll to appear on my screen when I start saying error loading I need them to be installed or I can remove them thanks

  2 rundll Ihave to appear on my screen when I start my pc, they declare that they are error loading c\windows\system32\prwleprn.dll. and c\windows\system32------nsiad.dll - (the specified module is not found.)   could you help please because I do not know if I need it or not if I could you tell me how I can install them, but if I don't need them could you tell me how I can remove them thanks

  PML instructions are precise and concise.

  My instructions for this issue are similar but more verbose - perhaps they will help you get your system fixed to the top (just read them first, then apply them).

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.

  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.
  
  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]