Bluescreen error: 0x0000007B

Similar Questions

• During the installation of XP bluescreen error 'Check for viruses on your computer' and 0x0000007B error code

  All of a sudden my computer will not start and I tried to reinstall/repair the operating system.

  When you try to install the OS, when booting from the CD and before asking questions of formatting, it displays a blue screen. sayng 'Search for viruses on your computer' and finally 0x0000007B, etc...

  Thanks in advance

  If you use hard drives SATA and AHCI is enabled in the BIOS, you will need to press F6 and add SATA drivers when it says press F6.

  Otherwise, you will need to change AHCI Mode IDE in the BIOS (BUT you cannot change it back to AHCI after). Well, you can with a registry hack

  Or you need to integrate the SATA drivers, then reinstall windows

  This is what the stop error 0x0000007B means. He can not find the hard drive (if you add or integrate SATA drivers). It will crash before you get the installation / configuration screen (XP, since the XP CD doesn't have SATA or RAID drivers on that).

  And clear the virus check option in the BIOS if its permit

• Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  I want to create a virtual machine using VMWare Converter 4.0 from an Acronis True Image to ESXi Server 3i .tib backup file. The conversation seems to be working, but when I try to start the virtual machine, it begins to start, displays the Windows 2003 splash screen briefly and then fails with a blue screen with the following error:

  STOP: 0X0000007B (0XFFFFFADFD520F3C0, 0XFFFFFFFFC0000034, 0 X 0000000000000000, 0 X 0000000000000000)

  Looking through the forums I've seen this error mentioned with 64-bit Windows 2003, but no mention of 32-bit?

  Any help much appreciated.

  THX

  > Thanks, unfortunately the .tib Acronis True image files do not work with Converter 3.0.3

  You already have a virtual computer that start - it's just bluescreens - so no need to run the full convert again.

  Juist use Converter 3.0.3 to configure the virtual machine - part seemed to have failed

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• install only a winxp.trying so that i receive bluescreen error.please give the solution

  I'm already installed win vista for my compaq cq60-104tu laptop.now I install only a winxp.trying so that i receive bluescreen error.please give the solution

  Hello

  It would be better if you provide the exact error message, but you can try the following procedure:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=ob-54270-1 & CC = US & LC = on & DLC = in & DLC = in & lang =

  Kind regards

  Mohammed Mukram

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

  How to install Win XP on PC with intel i3 processoe running win7

  Hello

  I'm working with a legacy system. My programs to work with Windows XP and more excellent only.

  Now, one day I can not PC with Windows XP we have windows 7 to house high-end system running on the desktop computer intel i3 processor.

  I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

  The new PC with SATA HDD and CD ROM, I was told that windows XP Setup has no support for SATA drives, at the same time if I want to install the drivers, that it seems that for the floppy drive. Thus, it is difficult to install the drives.

  Also when I spoke to Dell Tech support person, he said I can't install Windows XP on the Intel i3 processor. I don't think, but I will this differ from expert.

  Can someone help?

  Hi Steve,.

  You can follow this link & check if the problem persists:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  
  Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  If the problem persists, please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Receive error error: 0x0000007B while trying to install Windows XP.

  Help! I can't install XP! Blue screen of death every time?

  I am trying to install Windows XP Pro on an old hard drive from the laptop, beforehand I had it wiped, partitioned in two and made a NTFS format partition.

  I use a computer without a hard drive to install XP, the drive of the laptop is connected using an external hard drive box.

  The Windows XP computer on I use is a netbook without cd/dvd drive, that's why I use another computer to get windows installed first.

  The first installation is going well. I select the formatted partition I want XP must be installed. The files are copied from the XP CD on the hard drive. Then a restart occurs. The XP loading screen appears, but before the loading bar comes alive I get a blue screen.

  I tried to install 3 times now, each failure at the same point. I don't know what to do now?

  Error: 0x0000007B (0xF78A2524, 0xC0000034, 0x00000000, 0x00000000)

  Windows XP is not designed to be installed on an external hard disk... only an internal hard drive.  What you need to do is to buy an inexpensive netbook external optical drive so you can install Windows XP directly.  Here is an example: external optical drive

• error 0x0000007b (0xf78d2524, 0xc0000034 0x00000000 0x00000000)

  My son has an acer 5735 laptop that was infected by some kind of virus or spyware. Tried to format the hard drive and reinstall windows but had the error 0x0000007b (0xf78d2524, 0xc0000034 0x00000000 0x00000000). So I bought a new hard drive and got the same message. I don't know what to do, I read several possible fixes but do not know what I should try. Please help if you can. Thank you!

  Hi Djlhope,

  You receive the STOP error: 0x0000007B, for various reasons. You can access the links below and follow the steps in the article to resolve error STOP 0x0000007B on your computer.

  http://support.Microsoft.com/kb/324103

  Hope this helps and let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get a bluescreen error 1-3 times per week for 2 months.

  * Original title: Bluescreen Error

  I get an error bluescreen 1-3 times per week for 2 months, usually indicating that the computer is being closed to protect the computer against damage. The latest incident took place on 04/01/2016. I ran all the diagnostic tools I could find, including a group called UBCD, but received no notification of an error. A possible anomaly occurred when I was running a test of memory associated with my NVIDIA GeForce 960 GTX graphics card: the test is run rather quick end to a reboot. Device Manager, however, said that the adapter is running correctly.

  I hope you can help me.  I have a lot of work to do, particularly on the graphics this computer has been configured to manage.

  Jan 4 incident occurred when I was loading a new program to run a telescope I received for Christmas. The program has been Starry Night Orion special edition 6 I read your directions for collecting files, grouped in a rar file and placed in a file on my drive one. The link to the file is: https://onedrive.live.com/redir?resid=A3029F8020206937! 424 & authkey =! AHQicx22LzO-XM4 & ithint = the file % 2crar.

  Please let me know if I messed anything up.

  Thanks muchly,.

  Robert

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• HP 8300 Elite P2V conversion small Form Factor Desktop BSOD error 0x0000007B 0xFFFFF880009A97E8 Please Help!

  Dear team,

  We try to convert HP 8300 Elite form factor small office with Windows 7 64 bit in Mode AHCI (default) to VM

  Using Vmware converter 5.5.1 (SCSI LSI Logic SAS, the conversion worked fine, but starting the machine virtual blue screen came

  Error 0x0000007B 0xFFFFF880009A97E8

  We tried to LSI_SAS via the always the same error loading registry hive

  We tried FDI during the conversion then also the same error

  Help, please!

  Dear all,

  The problem is now solved, it was with approval on some of the filesystem (cd, usb, flpy) and INFs (cd, usb, flpy)

  about resetting the permissions, it worked

  Concerning

• BlueScreen errors

  Dear all,

  I run Windows XP it SP 3 off vmWare Fusion on my MacBook Pro, w. 2.6 GHz (v. 1.1.1) and a 17 "display.

  Currently, I am experiencing bluescreen errors about 75% of the time I start up Windows on my virtual machine. These errors started happening when I uninstalled a software on the virtual machine Windows Live, but come to increase in frequency to the extent where my use of the Fusion has become seriously affected.

  Is it possible to change this anomaly?

  In addition and it's less important if there is a solution to this problem, I would really like to know, Windows does not recognize the existence of my iSight Camera, and there is no software in XP or the Microsoft Website which is able to manage this camera. Where can I find software for Windows that would operate the iSight?

  Thanks a lot for any help to unravel these problems!

  Steve

  Hello Steve,.

  I run Windows XP it SP 3 off vmWare Fusion on my MacBook Pro, w. 2.6 GHz (v. 1.1.1) and a 17 "display.

  just a note, the latest version of series 1.1.x 1.1.3 you should consider the upgrade (no new features, some bug fixes).

  Currently, I am experiencing bluescreen errors about 75% of the time I start up Windows on my virtual machine. These errors started happening when I uninstalled a software on the virtual machine Windows Live, but come to increase in frequency to the extent where my use of the Fusion has become seriously affected.

  Is it possible to change this anomaly?

  Well, you will need to provide more accurate information about yourself and this forum. Go to control panel > system > advanced > startup and Recovery > settings, uncheck 'Automatically restart' and select 'partial memory image' in the popup button "Write debugging information" section below.

  Then the blue screen is displayed, and you can take a screenshot of it (for example with the utility Grab in OS X - Grab in Spotlight search, run it, and then in the menu bar, Capture > window, then select the merge window with the blue screen). In addition, a dump file will create in your C:\Windows\Minidump folder. Attach the screenshot and the dump file to post in this thread as well. Also, try to search these forums for some representative text (usually written in capital letters) of the blue screen, you may be able to find a solution.

  In addition and it's less important if there is a solution to this problem, I would really like to know, Windows does not recognize the existence of my iSight Camera, and there is no software in XP or the Microsoft Website which is able to manage this camera. Where can I find software for Windows that would operate the iSight?

  Install Boot Camp on Leopard DVD drivers inside the virtual machine WIndows, if you haven't done it yet - the drivers of Boot Camp contain Windows driver for the iSight webcam, you need. Restart Windows and the Virtual Machine > USB > Connect Apple built-in iSight. Then try to use it with a program, or you should see along your virtual hard drive and right click computer and test it (don't know how it is expressed exactly, hope that you will be able to understand).

  Boris

• Blue screen STOP error: 0x0000007B

  Last night, I shut down my computer as usual, allowing it to update itself.  This morning I turn on only to find a formidable bluescreen message:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

  I tried the safe mode, safe mode with network, safe mode with command prompt (to run a chkdsk), last good known configuration and start windows normally only to be taken to the same blue screen message over and over again.

  Please help!  Thank you.

  Hello

  What were the changes made before the issue started?
  I suggest you check the section below.
  http://support.Microsoft.com/kb/922976
   
  Hope this information helps you.

• error 0x0000007B after installation in Portege R500 XP OEM recovery CD

  I have a R500 with 64 GB of SSD and preinstalled Vista.
  I try to downgrade from Vista with a R500 XP Pro OEM recovery CD.

  Decompression for the SSDS works fine - but at first start-up of XP Pro, I get a blue screen with an 0x0000007B error message and some tips about the infection by the virus?

  What causes this problem?

  Hello

  To my knowledge the R500 supports a HDD SATA controller and you include the SATA driver in the CD of Win XP using nLite software.

  The SATA driver is part of the Intel Storage Manager that could be found on the European driver Toshiba page or on the page of Intel.

  By the way; Check out this forum and use the search option to find more discussions about the Intel Storage Manager and how to use the nLite and include the SATA drivers.

  Here are enough discussions on this topic.

  See you soon

• Bluescreen error driver Tecra A4

  Tecra A4 model PTA42A-01C001 running XP - Pro bluescreens occasionally with a driver error. I can't find my model on the download from Toshiba site. Can someone please help?

  Very interesting, mate! :)

  Thank you for your comments. It's always interesting to read.

• Satellite M40-129 Harddrive Bluescreen Error

  Hello
  I got a M40-129 last year, created 2 Partitions and installed XP Pro SP2. Everything worked very well, but a few months I drive hard-error-Bluescreens. When I run Chkdsk afterwards, I get messages about bad securities Index or orphan data segments (translated from German). Normally I reinstall my laptop then go to a backup Image and all is well again. But these errors occurring weekly/daily now.

  I called the support, but I was told that the support would be only grab the laptop and see if the problem still occurs. But that's what I'm already doing. Is it possible to fix this?

  Best regards
  Spoony

  P.S Partition Magic shows my a score of 88 Type which is big 204 MB. Any idea what this score is used?

  Hello

  First something about your partition hidden.
  The M40-129 Sat was delivered with the Media Express Player.
  This player is pre-installed on the hidden partition.

  Well, HARD disk system errors and the file can result from a variety of problems, such as hardware failures, outages of electricity, poor system maintenance, virus and human error.

  When you run Chkdsk with parameters, such as / f / / r, Chkdsk repair errors related to file system structures.

  I recommend the Microsoft information page. Here, you will find many useful information about HARD drive failure and why this happens.
  http://www.Microsoft.com/technet/prodtechnol/winxppro/reskit/c28621675.mspx

  Good luck