error 0x0000007B after installation in Portege R500 XP OEM recovery CD

Similar Questions

• Error occurs after installation of Service Pack 3

  Windows XP starts after installation of Service Pack 3 only in safe mode.
  What about this error, the machine doesn't turn after restoration (to an old restore point) very well, but in this case that I do not have Service Pack 3.

  Can I install updates that are unique in the future, or do I have service pack 3 for windowsupdates in the future?

  Kind regards

  Pluto

  http://support.Microsoft.com/kb/950717

  Steps to take before you install Windows XP Service Pack 3

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Support: https://support.microsoft.com/oas/default.aspx?gprid=1173&st=1&wfxredirect=1

  TaurArian [MVP] 2005-2010 - Update Services

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• Error 0x0000007B after return of 10 to win

  Greetings.  I was wondering if anyone knows how to fix 0x0000007B 0xFFFFF880009A97E8 0xFFFFFFFFC0000034 errors that occurred after my back on 10 to win, after I got my machine was not compatible.  Windows goes into an infinite loop with this error.  I tried to recover the BCD and used the system recovery disk - I rebuilt the BCD and the system recovery disk not found errors with the system, but it always starts in this error.  Any ideas?  Thank you.

  If you want to revert to the earlier version of your operating system, make sure that you back up or created a system from your old operating system image disc. In your case, it seems that the 10 Windows is completely installed already when you created a return to the top. The reason why he went to an infinite loop is because it is possible that the backup file is corrupted. The best thing we can offer is that you perform a clean installation of Windows 7.

  If your concern is to lose your files, try installing Windows 7 upgrade. Please see this link for instructions: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  Feel free to get back to us if you need further assistance.

• kb2492386 error 0x8024200E after installation attempt failed

  The error message above appears after checking Microsoft Update & any attempt to install updated kb2492386.

  I am running WinXP Home, SP3. Any help would be appreciated.

  Hi UKdeejay,

  1. did you of recent changes on the computer?

  2 are you able to install some other updates on the computer?

  3. do you have security software installed on the computer?

  Method 1

  I suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If the previous step fails, then I suggest that you manually download and install the update, check if it works.

  Update for Windows XP (KB2492386)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=186EDB1C-4D75-480e-AADC-CEDE88D9B047 & displaylang = El & displaylang = in

• Error 80070005 after installation of driver update

  From: surfer100

  I've lived (literally) six laps with HP support chat, try several ways to uninstall and reinstall, also without success.   They practically abandoned.

  The resolution of the monitor is fine... but I can't use all of its features, because the display software will not work.

  Then, suddenly, automatic update of windows offered this update driver... which will not be installed.

  Then... I suspect that the problems are related.

  Any ideas or suggestions are welcome.

  From: surfer100

  I found that disable the program data execution prevention in Vista, lets now HP my display software works correctly!

  I turned Data Execution Prevention on OFF, execept for essential windowsservices by going to control panel, click System, click on the system protection, click on the Advanced tab, click settings, click data execution

  Prevention tab and then click "turn on DEP for essential Windows programs...". »

  This problem of HP my display software does not, as well as several other programs began only a few months ago. So I guess that a security update changed the DEP for always on for everything... so if any program would run is not "compatible" with DEP it does not work... and the error message

  will not tell you!

  Another response of the community of Windows Vista discussion groups

• Portege R500 - blue screen after installing Windows XP SP3 home edition

  * computer toshiba Portege R500 laptop *.

  * non-modele ppr50e00j00fs4 *.

  SP3 installed via update-site, received successful message SP3 installed restart... now bluescreen an impossibility to restart! Not even in save mode!

  If I try to start with the InstallationRecommandations, I get the following message:

  STOP: 0X0000007E (0XC0000005, 0XF79ED8EB, 0XF79ED7F4, 0XF79ED4F0)

  Can someone help me please?

  Hmmm. seems that this is a known Microsoft issue because I found these MS knwoldge base article:

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182/en-us/

  Microsoft has stated that:

  + These problems may occur if a system thread generates the error handler catches not an exception. You receive this error message if one or more of the following conditions are met: +.

  + If this issue occurs after the first restart during Windows Setup, or when the Setup program is finished, the computer does not have a sufficient disk space to run Windows. +
  + If this problem occurs after the first restart during the installation of Windows, or once the installation is complete, the computer's BIOS may be incompatible with Windows. +
  + Incompatible video card drivers. +
  + A chauffeur service or system device damaged. +
  + If the problem is associated with the Win32k.sys file, it can be caused by a control program remote third +.

  I recommend checking the solution proposals published on the website of Ms.

  Good bye

• Re: Installation of Win XP on Portege R500 12 q

  Hello
  I would like to install Microsoft Win XP on my Portege R500 12 q (128 GB SSD drive)

  If I start the installation of the CD, there is normally the possibilety to install a third-party driver through by pressing F6. But the problem is, that nothing happens if I press F6 at this time (tried more than once).
  OK if I wait, I get the possibilety to specify the mass storage, because the installation program does not find any. If I want to install the drivers now, is the only possibilety to install drive A: (floppy drive) but I don't have a floppy drive.
  I have not found the driver SSD - to the Hompage, but I think that it is included in the Matrix Storage Manager, isn't it?

  It is really difficult to install Win XP on a SSD? Please help me.
  Thanks in advance.
  Greetings
  Stefan

  > Ok if I wait, I get the option of specifying mass storage, because the Setup program does not find any. If I want to install the drivers now, the only possibility is to install from drive A: (floppy drive), but I put t have a floppy drive.
  If you want to include the SATA driver using the F6 option then you MUST USE the floppy drive. But if you have a USB floppy drive, then you can use nLite software to include the SATA drivers in the new created XP CD.
  The SATA driver is part of the Intel storage Manger and you can download if from here:

  [Intel storage utility eat 32-bit Configuration diskette (201ko) 8.6.0.1007 | http://downloadcenter.intel.com/download.aspx?url=/17061/eng/f6flpy3286.zip&DwnldId=17061&ProductID=2101&lang=e ng]

  For more information about nLite Internet search!

  > If I change the setting again in the bios I always get a blue screen, but I can't install the driver of the matrix (SSD) as long as I n t, setting change and I think I don t use the SSD speed possible.
  It is clear. You will always get a BSOD if you would replace the SATA mode in the BIOS after installing any OS. If you have installed the operating system, you can not change the SATA mode in the BIOS.
  But if you want to change it again once, then you will need to install the new OS using the SATA drivers

  Good bye

• Error installing software Portege R500 to fingerprints under XP

  Hello, I install XP on Portege R500 and all the drivers from the Toshiba site. After installing the software of fingerprint AuthenTec worm: 1.1.11.8 and restart error of: fingerprint identification system TrueSuite Access Manager:

  EventType: BEX P1: P2 FPManager.exe: 1.1.11.8 P3: 471317a 0
  P4: FPSuites.dll P5: 2.2.13.19 P6: 4733c92a P7: 00003628
  P8: c0000409 P9: 00000000

  Do not send

  I'm trying to install the driver without software but it's impossible.

  Thanks in advance.

  Hello

  Have you installed the following things all enforcement facilities contained in the Instructions of facilities?

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• Portege R500 - error message "sound device is not supported" THotkey

  Hello

  Whenever I have start up my Portege R500 I get THotkey message error "sound device is not supported. \
  The same error message repeats when I touch the volume icon. There is also no sound.

  Any idea what causes this? I have tried to uninstall and reinstall the driver most that can affect the shortcut key and the sound.

  Thank you

  Nico

  Is it Vista or XP?

  Have you installed Windows yourself or it was preinstalled?

  Maybe the wrong driver was installed (of another model for example).

• Portege R500-100 - drivers after format HARD drive

  Hey,.

  First post so go easy :)

  I reformatted my hard drive the other day, but the drivers for my laptop support is poor.

  The audio drivers are not working, I have several unknown devices in Device Manager in need of drivers, but I don't know what drivers to install.

  Anyone could point us in the right direction?

  Its a r500-100

  Hey Buddy,

  Why you are not satisfied with the Portege R500 driver support? I mean can you all the drivers on the site of Toshiba, and for most versions of Windows. Just follow the link posted by Al - eX.

  And you should install all the drivers you can find on the Toshiba site. After that, you use all the functions of your mobile phone and you get back to factory settings.

• CTRL key is lost after installing XP on Portege R500

  I recently got rid of Vista and installed my XP SP3 on Portege R500 (deleted all partitions in Vista and created 2). However after that all the drivers and software from Toshiba are installed, I realize that both 'Ctrl' keys on the laptop don't work, and they are the only keys that do not work. I need to use the external USB keyboard to have functions of "Ctrl".

  No one knows why the ' CTRL ' disappeared? Is it a hardware driver/config that disabled on laptop computer, the keys 'Ctrl '? How to solve it?

  Thanks in advance!
  Patrick

  It's amazing. What a crazy problem? Never heard of this.

  What version of BIOS is preinstalled on your laptop? Later perhaps 1.60?

• 'Unknown devices' after downgrad from Vista to Windows XP on Portege R500?

  I recently downgraded my Portege R500 of Vista installed at the factory for WinXP.
  I managed to install without problem, and today I met an "unknown device" which I can't fix.

  The details of this device:
  Location: on Interl 82801GBM (ICH7-M) LPC Interface Controller - 27 b 9
  Device Instance ID of: ACPI\IFX0102\4 & 38462492 & 0
  Hardware ID: ACPI\IFX0102 * IFX0102
  Compatible ID: * PNP0C31

  If anyone can help, please help!

  Hello

  Have you installed the XP drivers all available from the European pilot of Toshiba page?
  Please take the look in installation instructions txt file. You will find a list of all the necessary drivers that must be installed. The order of installation is important.
  Please install all drivers as mentioned in the installation instructions.

  PS: On the page there is also an application of Infineon Trusted Platform Module.

  Greetings

• Failing utility Portege R500 fingerprint after upgrade to Windows 7

  Just, I improved my Portege R500 to Windows 7 (clean install) and downloaded the latest Tosh utilities and install.

  When I tried to set up the utility of fingerprints by the registration of fingerprints, I get to the end where I am asked to register the imprint, and then get the message "operation failed. Model duplicate already exists. "

  Can anyone help please?

  Hello

  Seems there is something wrong with the registration of fingerprints for me it looks like the old fingerprints are still present, somewhere in the registry or on the folder of files to HARD drive.

  I think you should first remove the traces of fingers and then have to uninstall the software.
  After this should clean the registry using a tool like Ccleaner.
  Restart the unit. Install the VAP (value added package) and fingerprint software!

  I hope this helps!