Bluescreen when starting the computer
The blue screen recently pop up on my computer trying to put in safe mode, but the blue screen always appears with the same erro message that says a problem has been detected and windows has shut down to prevent damage...
Hi Ashleyy99,
1. did you of recent changes on the computer?
2. When you get the blue screen of death on the computer?
3. What is the full error message and the error code you receive on the blue screen of death?
Method 1
I suggest that you try to start in last good known Configuration and check if it helps.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 2
If the previous step fails, you will need to perform the installation of repair of Windows XP.
Perform a repair Installation
http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx
Tags: Windows
Similar Questions
-
In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled... So far, it has been very nice to have allowed. Is no longer mapped network drives see the place as disconnected. But what happens if the computer is not connected to a network? Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?
Check these:Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspxPriority and group policy processinghttp://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx -
When start the computer can be turned on but nothing happens
Original title: computer does not start
Hi all
Have a dual processor Intel running Vista with 2 GB of memory.
When start the computer can be turned on but nothing happens. That is the screen is not lighting, brief flashes KB on and nothing. I hae take the drive HARD case and implemented it is powered, but there is no sign that it is accessed at all when the machine is running. It seems that ot could be the HARD drive, but I think that there is a rom on the motherboard, which is accessible in the boot process and I wonder if this could fail. I don't have a spare drive to test what happens then is anyway I can be sure if I need new hard drive or m/Board?
While on the question - if I need a HARD drive, Vista is the one that crashed and I do not have a Cd with the machine when I bought it. Nor has created a cover of one! I have an old XP Pro upgrade disc and an original copy of Windows 2000 (so I can switch to XP). This is my best option? I can't afford £ 140 for Windows 7.
Hi Eddie,.
Since this is a hardware problem, you should contact your computer manufacturer or a hardware technician to understand the defective material.
And also, since Windows Vista was preinstalled on the computer you must consult the manufacturer of the computer for resettlement or a recovery DVD. Also survey about data recovery on hard drive crashed.
-
ESSO-LM - Installation Package MSI when starting the computer, instead of login
Hello
I'm on the migration project ESSO of the V10 V11.1.2.2 customer asked the deployment of the package to the large community of users without user intervention. Logoff scripts have been changed to remove the old version. And they already have scripts to run when the computer reboots, as well as during the user logon.
My question is can I install new MSI packages during the reboot, without user having to connect and wait for the package must be installed after it connect?
Thanks in advance
I guess I answered my own question by testing in the laboratory. I tested the MSI installation when you start the computer up without any problem. The conclusion, there is NO dependence of the user with the installation of ESSO-LM for the computer to start. The advantage is to push the installation without the need to have the user performing the installation...
-
Cursor freezes and the keyboard does not not when starting the computer.
Original title: I can not move the cursor. Why
After I log on the computer, the cursor is frozen and the keyboard is idle.
Hi Ron,
-Were there any changes made to the computer before the show?
I would suggest trying the following steps and check.
Method 1:
Step 1: Start the computer in safe mode and check.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeIf the problem does not still in safe mode, then put the computer in a clean boot state and check.
Step 2: Configure the computer clean boot.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.
Method 2: Run a virus scan to ensure that your computer is virus-free.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Let us know the results.
-
Satellite L100-130: every moment of sound when start the computer
I have a Toshiba Satellite L100-130 (my first laptop and my first experience with Windows XP). When I start my computer I hear the Microsoft Windows XP, but after that I have to manually set the volume, because it is set to 0 whenever I start my laptop.
I wanted to know if this is normal with Windows XP/portables or there is something wrong with... nothing...
Hello
The sound at the beginning Windows XP is a normal problem.
All the audio settings you can change in the control panel and sounds and audio devicesIf you don't have a sound while the laptop and the OS from so you can turn it off on sound tab sounds and audio and audio devices
To change or disable the sounds you must change the settings in the program events window -
Original title:
When the computer starts, this message to MS Visual C ++ Runtime Library C/program files/real/Real Player / Real pure R6035 - virtual function cell Play.exe
Hello
1 how long have you been faced with this problem?
2 have you made changes on the computer before this problem?I suggest you perform the clean boot on the computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on Startand then click run.
2. type msconfigand click OK.The System Configuration Utility dialog box appears.
3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer. -
I get the same code at startup until you mean? Stop: 0x0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)
0x7B bug check code
http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspxThe boots are sometimes successful and sometimes not?
If you you do not want to lose any data, make sure you take a backup on removable media before trying to solve the problem.
Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.
Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.
If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.
However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.
What is your computer brand and model? You have a Windows XP CD? It's a detail. Generic OEM or OEM brand copy. Suppliers of computers brand often give users a copy of Windows to a recovery partition. That applies to you?
Take a look in the system log in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.
You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.
A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.
-
Error message when starting the computer in normal mode: btdna.exe
I get this error during start-up:
WSA startup failed or if you have the wrong version of the installed Winsock.
I tried the command prompt, run as an administrator and reset but it not taken care of the problem. Help, please!
Hi Amy Shane,.
Welcome to the Windows Vista answers Forum!
You can check the following link and analysis online on your computer to verify if your computer is infected with a virus.
http://OneCare.live.com/site/en-us/default.html
Step 2: Manually remove BitTorrent from the PC
1 open the Task Manager by pressing the Ctrl + Alt + Del or Ctrl + Shift + Esc key combination.
2. go to the processtab.
3. search btdna.exe and right-click on it.
4. Select end process.
5. click Yes when the warning sign is displayed.
6. close Task Manager.
7 Click Start then start search
8. enter C:\Program Files\DNA\btdna.exe / UNINSTALL.
9. use the search function for all other instances of btdna and also remove them.
If you are prompted to restart the computer, then restart and reinstall the btdna.exe.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Get message BSIZE_CDB_Software is deleted from my computer when starting the computer
Tuitel original: BSIZE_CDB
When I restart my computer, I get the message that bsize_cdb_software is deleted from my computer.
Hello
1. did you do changes on the computer before the show?
2 is the exact error message?
3 are you using an HP computer or is any HP device attached to the computer?
Method 1: Clean boot
I suggest that you put the computer in a clean boot and check the cause.
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
Check out the link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135.
Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.
Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).
Method 2:
Uninstalling and reinstalling all HP drivers\software and check if the problem persists.
To uninstall the drivers:
a. Click Start, type devmgmt.msc and press enter
b. now right click on the device and select uninstall.
To uninstall all HP software, please visit this link. Reinstall the same website here.
-
off frequency message error when start the computer in normal mode
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hey pamyres
you say not what led to what happens
You must give information here to get help
try a restore of the system in safe mode before your problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Walter, the time zone traveller
-
Desktop HP 110: password when starting the computer
How do I get this to quit asking me a password to start whenever the computer reboots
not the password to get in this lies in the middle of rebooting it ask pswd so it will be
finish booting
Thank you
Hi again ladyneon4,
Thanks for the quick response!
Since you mentioned that this issue happens Mid-boot, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
I hope this helps!
Concerning
-
Unknown BIOS 8302 error when starting the computer
Original title: error code 8302
Whenever I turn on my computer, I have to press F1. A screen pops up saying
Check the NVRAM...
Unknown BIOS error.
Error code = 8302
Press F1 to resume
What it means and how to fix it? He used to start fine then all of a suuden one day he started this dong.
Hello
Have you tried to delete / reset the CMOS? This error starts occurring when the BIOS starts to lose its information, which can sometimes be resolved by updating / flashing BIOS as recommended above. If it does not, the Council will have to be replaced or repaired.
Kind regards
Patrick
-
Help, Network 2 appear when start the computer and not connect to internet.
I have a problem with the network on win7. I have a modem and router wiless. I connected through router wiless. Currently I change the ip address of the router, and the problem occur. 2 apprear and ip network, change default gateway ip address of the router and I can't connect to the internet.
I don't know for this problem
Hello
1 what happens exactly when trying to connect to the Internet?
2. you get any error message?
I suggest to follow the steps provided and check if it helps.
Method 1:
Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshootersMethod 2: If the problem persists, then try the steps from the link.
Wi - Fi and in Windows network connection issues:
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsCheck this link for more information:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-InternetHope this information is useful.
-
Display the icon "2 MIN" when starting the computer
Is this normal?
Whenever I turn on my netbook (756-2420) a "2 MIN" appears in the background of the welcome/login screen. Everything works well, but it's boring and I don't know how to get rid of it.
Could be normal, not sure.
Your 756 does?
This netbook is brand new (1 day).
Thank you
This is an easy solution, because it is just a wallpaper. Go to C:\Windows\System32\oobe\Info. Rename background file in Backgroundsold or the name you want! Create a new folder named Backgrounds & copy the content of the NOWAIT circles! Restart the PC & all should be well
Maybe you are looking for
-
I opened my garageband, but I does not, because there was a question mark hollow garageband icon, then I restarted the computer, it normally restarted (whithout saying I restarted the computer because of a problem), and when it was made of built-in a
-
Satellite Pro C50 - A - screen Black/Brown problem
Hi all I want to share one problem that I have with my cell phone, just to see if anyone of you already experience or maybe you know some options how to solve this problem. I bought a Satellite Pro C50 - A model in January 2014, with 8.1 Windows prei
-
Pavilion 15-n248sa: Hp pavilion n248sa-15 drivers Win7
Hello, I have remove win8 and install windows 7 but can not find, if somene is going to help me where I can download driver I will be very greatfull. I tried HP but no result, wireless and ethernet its more important. PCI\VEN_10EC & DEV_8179 & SUBSYS
-
I have Windows Defender and MS Security Essentials (disabled) on my laptop VAIO under VISTA SP2. My main question is, ' who is best (if there are two) AV App? I note in WIN10 (on my HP Pavilion desktop computer) that Windows Defender is the default
-
I was informed by Norton that the windows base filtering engine service is not running on our laptop. And I need to notifify you.