Bluetooth configuration between mobile phone and Tecra S3

Similar Questions

• BT connection between mobile phone and Satellite A100

  I have a Satellite A100-225. What should I do for my computer to be able to make a link to my mobile phone?

  If anyone can help, it will be great.

  Course, your mobile phone must support Bluetooth. Check if your laptop is Bluetooth built-in, otherwise, you can use a USB bluetooth adapter for example. You can find the most appropriate for your laptop in the "Product information" section of the Toshiba bluetooth site:
  http://APS.toshiba-tro.de/Bluetooth/
  The latest version of the software that you can download from the download section of this Web site. This software lets configure you connection BT mobile phone.

• Switching of data (contacts,...) between mobile phone and smartphone Acer Liquid E600

  Hello world

  I own a E600 liquid Acer (my first smartphone) and I would like to transfer my data (contacts,...) of my mobile phone (Sony Ericsson T715) on my smartphone. I would use my PC because my mobile phone is no longer in good working condition. Transfer data from my SIM card (in mobile) and then put the SIM in Acer, presents a risk a lot because the mobile could fall. Can I do not to transfer the data to the micro SD card in my laptop and read it with the card on my desktop reader? What is coordinate and what software (Acer) do I need to run it.

  Thanks in advance for your support

  If your T715 is able to save contacts as .vcf (Vcard) on the microSD, then you can put the microSD on the E600 and charge these to the list of contacts .vcf.

  http://en.Wikipedia.org/wiki/vCard

  You can also try to pair 2 phones via Bluetooth and transfer contacts via bluetooth. can be a simple or a nightmare... depends on matching the success and the bluetooth protocols.

• connection Bluetooth with the mobile phone cannot be established

  HP pavilion laptop g6 with windows 7.

  connection Bluetooth with the mobile phone cannot be established, all drivers were dated until, when it is associated with my phone samsung smart, driver downloads and everything is ready for use.but when click the smart phone

  It shows offline and it said no device ID is given,

  What to do, please help

  my portable BT device is defective? or some other problem, has also tried to connect other phones too, but same problem.

  Rgds,

  Hello

  I just want if sure that you have the right driver installed from this first link provided in the answer from the Support Engineer. If you click this link, then clikc the first option 'Use the device in Windows 7 Troubleshoot utility' need you a paragraph with a link to the appropriate driver.
  I will link here just to make sure.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?swlinkmsg=200&cc=us&DLC=en&docName=c01590950&LC=en&product=5068623&softwareitem=ob-76382-1
  It's the right driver you need. Please verify that this is the one that you have installed and do we know the results.

• The cloud, mobile phones and save automatically.

  Hi all

  Bit of a mash of questions here so please bear with me.

  First part of my question is about 'cloud' for storage.  I'm a designer and I've never used the cloud / all cloud for storage as I always have just saved on my hard drive.  Of course, this has its limits and is not at all afraid (except perhaps not being able to access the cloud but hard drives can fail too).  People use the cloud as their main storage medium for their records?  I wonder if there is a way that when I save my work on my computer it could automatically save in the cloud (perhaps overnight auto update?) Or the other way around, I save to the cloud, then it downloads on my computer?

  Second part of my question is regards to mobile phones and outlook, which I know is not a matter of CC but I wanted opinion techno that I'm not very aware of the tech stuff.  In September, ends my mobile contract.  For now, I can get my emails on my phone (iphone 5 s) but I don't know how (or if possible) to set up my schedule so it is all synchronized with outlook.  My emails with Gmail via outlook on my pc running.  My question is: what is the best phone / implemented to reach my emails etc being synced calendars?

  Thank you!

  Links for synchronization of files that can help... all the links I have, since I do not use cloud storage

  FAQ - https://forums.adobe.com/thread/1937790

  -https://forums.adobe.com/community/creative_cloud/host_sync

  -http://helpx.adobe.com/creative-cloud/help/sync-settings.html

  -http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html

  -Size limits https://forums.adobe.com/thread/1488242

  -sync and send a link http://forums.adobe.com/thread/1427516?tstart=0

  -Record ghost https://forums.adobe.com/thread/1490445 problem

  -an overview of https://assets.adobe.com/files assets

  -File sharing https://forums.adobe.com/thread/1838790

  I do not use cloud storage, I use an external enclosure and turns many readers 'naked '.

  Docking station USB3 with fan to swap disks http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-Cooling/dp/B0055PL2YI or http://www.newegg.com/Product/Product.aspx?Item=N82E16820147511

• I can't seem to synchronize collections between mobile lightroom and lightroom cc

  Hello

  I can't synchronize collections between mobile lightroom and lightroom cc. I think as lightroom mobile sync is not enabled on my Mac and so it syncs. I created a collection on my mobile and received an email that it is ready to be viewed on my computer, but it did not appear.

  see you soon

  Nick

  Could check you on your identity plate (see screenshot). Looks like your synchronization is paused.

  

• Transfer of multiple bluetooth files between Vista PC and mobile phone

  Does anyone know how to send multiple files (specifically contacts) from a standard mobile phone (not iPhone, Blackberry or Windows Mobile device) to a PC via bluetooth?  The Vista BT file transfer Wizard allows me to do one at a time, but not multiple.  I tried OBEX medieval and that seems to work for image files, but not contacts.

  Hi TampaRob,

  You should start by contacting the manufacturer of phones or browse the manual to find the information you're looking for.
  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra M9 - Bluetooth, problem with mobile ' phone

  I installed Bluetooth stack and a connection via Bluetooth Manager

  But Tecra will connect only as "Network Access Point.

  How can I create a link as modem - I'm probably not using the Tecra via mobile, on the internet but I have certainly you want to use the functionality of modem from mobile phones to send faxes and SMS (text) messages when out and about

  Any help much appreciated

  You must use the custom of "Bluetooth settings" Mode.
  Take a look at the following document called
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  on this site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO
  and you should make it work.

• WRT120N mobile phone and pc

  Hello, I have the following problem/question. I have W without WRT120N router and I use it for the WIFI connection for your laptop. My internet provider has limited life and I can't share internet between multiple computers. But I wonder if I can set up there a way to use the net Wireless from my mobile phone (nokia). The gsm based my WIFI but cannot connect and which is may be because life is limited. I connected the lan cable in one of the ports 1,2,3,4, not on the Internet port and I think that I now use the router as a switch. I can do something to configure the router so I can use the internet in my phone, too. I have nothing against if I have to unplug the pc to use internet from my phone. I just connect my phone on the net. I use an IP address, I mean that it has failed to obtain an IP address automatically. Ideas then?

  Simply because they have their own profile when you first connected to them. So whenever you try to sign in again, you will not too much problem. If you have changed the settings for your router, you need to remove the profile wireless on your phone before plugging in. Check your manual on how to do it.

  Let's try some troubleshooting on the router.
  Check this procedure. Do not configure PPPoE. Select static IP address in the Internet configuration then key - in the IP address assigned to you. Here is the procedure. On the basic settings tab, go to the Advanced Routing tab, select gateway instead of router.

  The provider of wireless Internet, post the IP address is assigned to your computer, connect your laptop.
  Same procedure, connect your computer to the router, after the INVESTIGATION period. Here is the procedure.

• Need access to tables 11g 11.1.1.7.0 OBIEE on mobile phones and tablets

  Hi all

  We have a requirement to allow users to view dashboards built in 11.1.1.7.0 on phones and tablets.

  Can you please let us know the configuration below appropriate to get to this.

  We need to build dashboards to be built again?

  Thank you

  Hello

  So, if you want to start you setting reports for mobile or tablets.

  You should enable the option of mobile application, how can you do that?

  1. you must apply a hotfix to an OBIEE:

  "BI Mobile App Designer is now available as a patch for Oracle Business Intelligence Suite Enterprise Edition, version 11.1.1.7.1. [patch number 17220944 to support.oracle.com] »

  2. When you got the enable Mobile Application, you must create your report with "BI Modila App".

  

  3. you have to set this link in your mobile phone, checking the connection to. layout

  http://docs.Oracle.com/CD/E21764_01/bi.1111/e10544/bimobile.htm#BIEUG11339

  Note: Also, you have this guide on how to create apps with Oracle BI Mobile App Designer

  Kind regards

• Projects of reactive nature is not recognized correctly on mobile phones and tablets.

  I have problems with a sensitive project being displayed correctly on mobile and tablet devices.  When I use Adobe Edge inspect the test on the mobile and tablets, it renders correctly in a vertical orientation, but not a horizontal orientation (direction of the unit).  When I publish the project for devices, and then download the project on a web server to test in a browser, I get the same results for the Tablet and mobile phone doesn't recognize any mobile version.  My problem is trying to get the device to recognize the mobile version in a sensitive project.

  What I found:

  On a Tablet (iPad 2 - iOS 8) I get the tablet of the presentation version when the unit is vertical and get a desktop morphing version when the device is horizontal. (These results were the same in Safari and Chrome browsers).  When you test in Adobe Edge inspect the tablet version works as it is supposed to be the direction. 

  On the mobile device (iPhone iOS - 6 8) I get the version compressed when the device is in a vertical and horizontal orientation.  It does not recognize the Mobile version of my responsive project at all (these results were the same in Safari and Chrome browsers).  When you test in Adobe Edge inspect, the phone does not recognize the project in mobile version when it is vertical, but recognize the version of the tablet in a horizontal position.

  I do not have access to other devices (i.e. Android) to see if the results are the same.

  How I found this:

  I created a new responsive project with only 1 slide and 1 button (the button is pause the presentation).  In the view of the office, I created a "Desktop" title and hid in respect of other points of view.  I did the same thing for the Tablet and mobile, with the titles 'Tablet' and 'Mobile' which are hidden in other views.  I then published the draft for the devices and downloaded on a test server.  Here is the link to test.

  So my question is if someone else gets the same results that I am and if someone knows a solution.  What I need the most is for mobile devices to recognize the correct version in a vertical orientation in a browser.  I hope this isn't a problem with browser/phone and it is an easy fix.

  Thank you!

  Also with regard to your iPhone.

  Your IPhone memory 6 is 375px width of display window, the default value of CP is 360. That's why your iPhone 6 enter the cause of the published file tablet mode detects your iPhone 6 width is greater than 360.

  Open this site on your phone and confirm your width is 375: what is my Viewport size?

  Then adjust (increase) your mobile breakpoints in captivate to the width of your phone. It should then enter the width of your phone.

• Facebook info is empty. It works on mobile phones and other browsers. What to do. no available on firefox settings troubleshoot pageeshoot

  The facebook toolbar is there, just no info is displayed when you switch. FB works fine on mobile devices and on other browsers. This just started yesterday... until everything was fine.

  If you have mac os x 10.6 with a processor intel latest Firefox 33 is supported in this regard. Please try if you get when you update again, since it will contain many criticisms of fixed security.

• Trying to connect my Samsung mobile phone and the camera to my PC

  Original title: device

  I'm trying to connect my cellphone samsung & camera to my pc, it came to say its there, but do not open please any help [ps [PS IAM 80 YEARS so do not hard & Ireally do thank you for any help]

  Hello

  1. what exactly happens when you try to use the device?

  2. do you get any error messages?

  3. what version of operating system do you use?

  4. What is the model of the devices?

  5 did you do changes on the computer before the show?

   

  We can share data in the phone and camera with PC only when install us the drivers for the devices. I suggest you follow the methods mentioned below.

  Method 1: Run the hardware troubleshooter

  See the following site:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update the drivers

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

   

  If the problem persists then I suggest you to download the driver for the device according to the model.

  You can try to download the drivers on the site mentioned below:

  http://www.samsung.com/us/support/downloads/.

  I also suggest you to reference the sites listed below:

  How to transfer media to your Android phone.

  http://www.samsung.com/us/article/how-to-transfer-media-to-your-android-phone/.

  http://www.samsung.com/global/allshare/pcsw.

• Bluetooth connection between Equium M70 and TREO 650 phone/PDA

  Hi all

  I have Toshiba Satellite M70-173 and come from TREO 650 phone/pda
  I want to hotsync my laptop and pda with bluetooth.
  How can I go? My laptop shows bluetooth stack, how can I activate bluetooth, what I have to buy the bluetooth adapter?

  Kindly help
  Concerning
  Maryline

  Palm based, isn't? If so, then check the HOWTO of the Toshiba Bluetooth site section:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists a HowTo called "HotSync over Bluetooth (TOSHIBA PC - Palm-PDA).
  It is perhaps useful to you.

• HP G60 - 430CA: I am trying to set up bluetooth between my phone and my HP with vista laptop flip

  My product name is a laptop HP G60 - 430 that why I can't put up with my flip phone via bluetooth.

  Hello

  Your machine doesn't have a built-in Bluetooth:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01768915

  You can buy/use USB - Bluetooth dongle to connect

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01768915

  Kind regards.