Bluetooth does not appear anywhere!

Similar Questions

• computer accepts the flash drive, but the drive does not appear anywhere.

  I can insert a flash drive and the computer accepts it, but the reader does not anywhere - I see the drive C, drive D, but not E, F or anything would be the flash player. Him 'delete... '. Safely"icon acknowledges the drive is there, but I can't copy a file to it, because it does not appear on the list of drives.

  I had a similar problem and it was hardware related.  There was too many USB devices on my drawing power USB bus, even if I had 6 USB ports on the motherboard.  I bought a 7 port Belkin powered hub to solve the problem.  A device such as a flash drive would connection beep and come in the widget of material safely remove, but the drive letter would never appear.

  Unplug all usb devices, turn off the system and pull on the power cord.  Remove the battery if a laptop.  Wait a minute or two to make sure that all power had evacuated and then turn it on and see if the flash player works just in itself.

  I assume that you checked the fash drive and it's OK.

• At Yosemite 10.10.3. When I download Firefox to Safari, it appears to download but does not appear anywhere.

  I had Firefox on my desktop and deleted from my system - clean the system. Then I tried to download Firefox again and it seems to start the download that happens really fast. Then, the screen comes up saying thanks for downloading - but the firefox.dmg is not found anywhere on my system. At no time small symbol shows himself - the time of download.

  Looks like you have a download called "iGetter" software that supports the download and safari does not block the software, making the download doesn't work do not. I don't know whether or not you want this software, but you should try to uninstall it, it will probably work. Uninstall instructions are at http://www.igetter.net/downloads.html

• the taskbar does not appear anywhere.

  My screen is good, the icons, but no taskbar. Button start completely around the clock do not appear.  I don't know that there's a simple solution. But by holding down command/window/delete button does nothing no more. Help

  Press Ctrl + alt + delete to bring up the Manager of the tasks in the Task Manager, go to file > new task > and type explorer.exe

  then proceed as follows to ensure that your system is clean:

  1. What is your current antivirus?

  2.

   

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  Remove all found, restart, and run again until analyses race clean, these can be removed later if you wish.

  3. tell us about your system:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

• Ordered the bluetooth on my new R61i-it does not appear anywhere...

  
  
  

• XPS 8700 Media Card Reader does not appear anywhere

  I have an 8700 old XPS to a month that is upgraded to win 8.1 (64-bit).  I tried to use the card reader for the first time yesterday with no success.  No indication after you have inserted an SD card (I tried 2), nothing in the file Explorer.  No obvious entry in Device Manager stating the existence of the device.  No HW in Device Manager, indicating problems of HW.  Any ideas other than opening the box to see if it is connected?   Bailey05

  Had the same problem with xps8700, win8.1.  Reference called Dell.  Were told to stop, unplug the machine, hold the power button for 15 seconds, then restart.  Worked like a charm!  Has been said that it is because the static load on the card reader.  Don't know if that's true, but the fix worked! Easy!

• Mail says it is downloading of mail but does not appear

  When I open the Mail I often get the message ' download 'X' to 'Y' messages '. The value of is usually is 66. The value of X, the last time I did was 37. Download thermometer shows progress, but no new emails are appearing. I think that there is no 66 emails, download, so I'm closing Mail. When I reopen it Mail, the message does not reappear is there 66 new emails in my "Inbox" or "Junk" folder

  I'm afraid that, while "downloading" is underway, something else is the download or download data are. I use OS X on a Macbook Pro 10.11.6.

  Anyone else run into this? Is this a problem or just a gene?

  Thank you

  I don't know if I have the same problem or not, on my iMac OSX 10.11.6. I'm afraid that mail which would have said that it is "Download" (and does not appear anywhere), is found in cyberspace somewhere!

  I don't want to lose personal mail!

• My Windows 8 partition does not appear

  Hello

  I have a problem with my macbook pro (early 2011) which I hope someone can help me with.  I tried researching the issue on mine and have not found anything that fits my specific situation.  I consider myself a little above the average user and do not have any formal education in computers.

  I had partitioned macbook brother previously with windows 7 and had no real problems.  I had looked at the walkthroughs on youtube and forums.  It was a year ago.  Last week I decided I want to partition my macbook so that I could use windows.  My boyfriend already has a version of windows 8 (64-bit) that had not been used, so I assumed that it would be nice to use it.  I carelessly did not saved my computer.  I used the boot camp assistant who has two boxes to check with the download of the last support Windows of Apple options and install Windows 7 or later.  I did both, which prompted me to plug in a USB key, I did.  When he was done download Windows support, it prompted me to install the cd that I used for the installation, I did, the 64-bit windows 8.  Then it prompted me to choose how I wish the windows partition.  I chose the option to divide it into equal parts, if I remember correctly out to be about 159 GB for storage remaining on my mac and about 159 GB passes to the new partition of windows.  At some point the computer restarted and I had the option to accept the terms and agreements for Windows and I did, and then he invited me for a product key, I got in.  I had options for disk 0, 1, 2, etc. and the correlation of numbers for partitions.  When I'd done it before if I remember correctly, one of the options should have considered something like "disk 1 Partition 3: BOOTCAMP" and I think that I would have a few steps after this formatting including it.  But the bootcamp partition has not showing as an option.  I decided to restart my Mac and remove the partition and start again when I had someone to help me.

  The problem is that I can't delete the partition because its does not appear anywhere on my mac, I can see.  I tried to use boot camp again to remove it, but he gave me the same guests as if I had just started.  I also tried to go to disk utility and it does not appear there either.  I also noticed that the approximate amount of GB I assigned to the windows partition always took to the top of this memory.  Instead of having the original number of GB of free space on my mac, it says now I 159,84 Go 85,87 Go free.  When I tried Windows partition using boot camp just to see what he would say, the corresponding figures having only 85,87 GB to divide between mac and windows.  After looking to the top of the information on my mac, the only thing I've noticed showing how much storage I had initially is entering the system report and selecting storage and see what is called the logical volume group which has 319,21 GB of which 159.02 is free, which is the number of the partition that I did.  But I have no idea if it is still relevant or even isn't a logical volume group.  I should have saved my computer and should have looked more into it before plunging blindly, but now that I have, I was hoping if anyone had any idea of what could have happened or what I could have done wrong.  The only solution I've come across is my current computer backup and reformatting of my mac.  I would try to avoid this if its possible but will if I have to.

  I apologize for the wordy explanation.  I used OS X El Capitan when I made the partition, and I updated after I made the partition hoping it might help somehow, but there is no change.  If more information is needed or if images are necessary, I would be happy to do so.  Thanks for your time.

  Other information:

  OS X El Capitan 10.11.3 version

  MBP 13, in early 2011

  Intel Core i5 to 2.3 GHz processor

  4 GB 1333 MHz DDR3 memory

  Graphics Intel HD Graphics 3000 384

  Wizard Boot Camp, Version 6.0.1 (522)

  Can you post the output of the following commands in OS X Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Assistant smart index does not appear

  Hello!
  I am fighting a serious problem while developing RoboHelp office x 3.
  Assistant smart index does not appear anywhere.
  Don't ~ ~, nothing associated with Smart indext Wizard does not appear in the program.
  Have I not bad installation?
  Someone help me.
  

  Hello dsfda and welcome to our community

  Using RoboHelp for Word or RoboHelp HTTML? Assuming that RoboHelp HTML, have you tried looking at the Tools menu?

  If you use RoboHelp for Word, I'll have to rely on a person who uses this product to answer.

  See you soon... Rick

• IPhone 5 Bluetooth icon sometimes does not appear on the status bar even though she was on

  Hello

  My iPhone 5 is a little weird lately after installing a new copy of ios 9.2.1 and I set up like new. Bluetooth icon sometimes does not appear on the status bar even if she was turned on.

  Here is my screenshot

  

  The application of settings

  

  Thanks in advance.

  I think it's one of those things. 1 you are not connected to anything with blue tooth here for you aren't really "use it" 2. Its a software problem and maybe if you take it to the apple store that they would turn you off and back on to reset it or you say to wait for the next update, if you want to save gas or if you ride or walk save energy if you the person who has a power car electric you can write a quick review with the Apple and say hey guys do a new update , I really need a heres my problem.

• Bluetooth headset does not appear in the control panel

  I try to use my bluetooth headset.  It is paired with success and it seems in the window bluetooth devices.  However, it will not work.  I looked in the sound control panel and the helmet does not appear.  This use to work, but stopped.  How do I add the bluetooth headset icon in the sound control panel so I can choose it as audio device by default?  I uninstalled and reinstalled the device several times.  I also have a bluetooth mouse and it works fine.  There is no other bluetooth devices.  I use Windows 7.

  Thank you

  Hello

  I suggest you to update the driver for your Bluetooth device.

  Method 1:

  I suggest you go through the steps and check:

  (a) Control Panel

  (b) sound > manage Audio devices

  (c) set by default

  See also:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Method 2:

  Step 1:

  To change the audio device by default:

  (a) click the Start button

  (b) type 'Change sound card settings' or ' manage audio devices'.

  (c) click the link with the same name.

  Step 2:

  An alternative is:

  (a) right click on the sound icon in the Notification area

  (b) select "Playback devices"

  (c) a new window called Sound, opens.

  (d) in this window, you will often see the audio devices for playback, which are currently present in Windows 7.

  (e) select the device you want to set as the default value and

  f key) click on the default value .

  (g) click on OK to save the current configuration.

  NOTE: the default selected device will be used by all of your programs unless otherwise stated.

  Set Default has two options: Default Communication device that manages all communications like the calls or videoconferencing on IM or VOIP, and default device that manages all the output is without the communication part.

  To choose the device that should be the default value for the communication and device that should make the rest of the book,

  Method 3:

  (a) click on the small arrow button set as default.

  (b) If you click it, the arrow will show you both options.

  (c) Select the communications device.

  (d) click on set as default -> default Communication device.

  (e) select the device for all other types of reading and

  f) click set default-> default device

  (g) If you want the device of Communication by default and the default unit will be defined on the same audio device just click on the button set by default instead.

  Reference:

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

• My USB hard disk drive does not appear in my computer, but is seen in the BIOS and not in disk management or anywhere else! What should I do now?

  I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

  Sunday, January 20, 2013 11:46:37 + 0000, Nikesh1123 wrote:

  I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

  On which computer data has been put on this drive? What is the file
  the drive system?

• Bluetooth does not work anymore

  Bluetooth function seems to have completely stopped working on my watch.  When I tried to re-pair it with my phone, it does not appear.  Neither appears in the bluetooth settings of the phone as an available connection.  I turned the market watch and bluetooth of my phone works normally with other devices.  I updated my phone a couple of days and have noticed this problem since then.

  mlantz23 wrote:

  .. When I tried to re-pair it with my phone...

  Clarify the status of your watch, as well depending on your watch and your iPhone. For example:

  Watch

  Is your watch still operational, but just disconnected?

  You always have access to the face of the watch and other functions, but with an icon of disconnected state indicated at the top of the face of the watch at the time display?

  

  Or is it odd - and asks you to choose a language when you turn it on?

  iPhone

  In the app shows, go to: Watch My:

  -Is your display shows at the top of my watch?

  -If you press it, then press the 'i' icon next to your watch on the next screen, the status of the next screen "Matched" above the name of the watch?

• USB key does not appear in the Finder or Desktop

  Using the latest version of El Capitan on a Macbook 12 "and then plug a SanDisk flash drive in the USB - C drive: the device does not appear in the Finder, at all, not under devices in the sidebar, or anywhere in the Finder. Also it shows only intermittently on the desktop. Of course, this makes the useless car.

  I found that the USB 3 restart MB with 3 USB stick connected via an adapter to the port of C rises. But we must secure it by Apple with an update of the firmware; We should not need to use workarounds to get 3 USB works through much touted app one port USB C.

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70