HP 500-164 Windows 7 drivers? (USB 3.0 connection and Wired)

Similar Questions

• Error - EPPkt.sys and c:\windows\system32\drivers\afw.sys not found and fix crashes in Windows XP Pro computer.

  Original title: during repair XP Pro from the disk installation, everything crashes.

  I am writing this plea on my desktop, pc Win 7 it. The pc is older and elsewhere in the House.

  Due to the white/white space in Add/Remove Programs, after checking the extent of possible for viruses, corruption Reg, etc., the advice of consensus was to reinstall the Windows, using the disc (this XP Pro was on the HARD drive when I got the pc - new to 2009 - and I did the back-up recommended/controlled , and that's what I was doing Rcounter Set up, around 1700 BST.

  Everything seemed to go OK, but black screen of Windows is now the small hourglass circulating and 'Please wait '.  The HARD drive is flickering, but it's been more than 3 hours!

  My second pc was rotten, and I had to reinstall or repair XP Home [disk] a few times. It is only 35 GB, compared to more than 100 on the pc in question - but I've never met before delay.

  Installation messages were as follows:

  EPPkt.sys and c:\windows\system32\drivers\afw.sys not found.  I checked this point, and it should not have caused any problems. It has also sought a labeled disc 'Machine Virtual Network Services', which no doubt, since I did not, was never necessary.

  I'll leave it on - but...

  Help, please!

  Well, I had to bow to the inevitable. Please accept this response as a ' I've been there - it could happen to you. "

  I spoke to BT [they provide my broadband] and the helpful guy asked me to look at the installation and reinstall in a different place. It's OK, but [, BUT] some of the drivers have been zapped in eternity. PCI, sounds, videos. The guy thought BT that these had been modified or replaced since the beginning, whereas they were not available. The XP Prof is on the pc when I got it, but I assumed that the pilots were on the backup disk, I did. No, they were not. And how to go online to search for them if we could not put in place the ethernet connection?
  So, I bought Win - 7 it 32-bit full ed. [be too afraid to try an upgrade].

  It could have been a response in the migration of these from other drivers, but I guess it was time to go.

  As I can't afford to buy new COREL, MS Word, etc, I have installed free VMWare player as a host for my older progs in a virtual environment.

  Another thing came out of this: although what remained of XP has been saved by 7 as WINDOWS.old, I am very happy that I had a HDD eternal with ntfs to preserve my files and installable 3rd party progs.

  I hope this might help someone - thanks for the info.

• Looking for Windows 7 Drivers USB - Pavilion-G7-2243us

  Hi all

  As the title says, I recently downgraded the OS on my laptop to Windows 7 to 8, and I have trouble finding drivers for the following items:

  PCI device

  SM Bus controller

  USB controller

  USB controller

  I searched on the HP support section, but all that is available are drivers of Windows 8.  I updated the BIOS to the latest version, but still no help.  Any help is greatly appreciated, because I don't know pilots who work there.

  Thanks for your time,

  Pherix

  Hello

  Download and install the drivers for the Chipset from the link below.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  When the installation is complete, restart the laptop.

  When windows has reloaded, download and install the driver from the link card reader.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56467.exe

  Kind regards

  DP - K

• 7020us dv7: Hp Dv7 7020us try to reinstall windows 7 from USB with new HD and RAM sticks.

  Hello

  In a bit of an affair with my Dv7. The laptop started to meet a load of startup error. Try using the recovery in Start menu tool led to a blank screen. You try to start windows normally flashed a blue screen too fast to read and then started the boot sequence all over again. I made a recovery from USB on my HP m6 s SO. However try to boot from the drive did nothing to change the way the computer tries to start.

  I decided to simply upgrade to a 1 TB Toshiba HD and 16 GB of RAM. Everything installed with ease by making sure that I was not on the carpet and have myself grounded to the metal structure of the laptop while working on it. However, starting with the new HD, I get the error SMART 301. If I try to run a diagnosis of HD happens "Not available" as the result of INTELLIGENT analysis and short-and long-term. I don't get then the no display device bootable detected. I tried to play with all the settings of the BIOS without changing boot.

  I don't know what to do now any guide I found said to use the recovery disk/drive in the boot menu. All of the guides I found for the creation and verification of a recovery device assumes that you have access to a functional desktop.

  Could I really have gotten a bad HD or s it showing not available because it is not configured for the SMART test?

  Any help is appreciated. I really enjoyed the two Dv7 I've owned and do not want it to turn into a paperweight.

  Although he remained until about 03:00, I had actually work on my own after few more search.

  I found a discussion saying that USB flash drives created using the Recovery Manager contains the recovery tool, but not a copy of windows for the restoration of the system. Given that I made a copy of the recovery media with my m6 SO, I was out of luck.

  Do some research more I found an article from a reputable site which links to a mirror of the files digitalriver. I don't link or discuss much more I know most of the forums do not like the word 't'.

  I however checked checksum SHA1 file against the official registration of the ISO file windows.

  Formatted the USB stick which was the Manager of recovery on it and turned it into a bootable USB key. Downloaded the drivers listed on the site of HP to get my WiFi market to download the rest of them directly on the Dv7.  All checks very well now. The 1 TB HD no longer displays the 301 error.

  I tried to reset the BIOS and make also a BIOS for emergency return to zero. Not more than anything.

  Thanks for the reply it would have been interesting to see what we could have done.

  Can you confirm what I've read about the creation of recovery media regarding the USB is different from a CD?

• Unable to restart or shut down Windows when a USB modem is connected to the computer

  When I plug a USB modem, either 3 G or dial-up, my computer will restart or shut down. It complements the normal stop the procedure, but instead of actually put back in power, the screen becomes black and stay like that. After a manual stop, Windows reports that he is recovered from a serious error. I have had this problem since I first installed Windows Vista about half a year ago. When there are no modems connected to the computer, it restarts and stops normally. In addition, printers and USB flash drives appear not to cause to happen.

  No idea how I could solve this problem? Thank you.

  Works fine now. Another bug of Microsoft.

• Computer laptop Windows 8 will not let me connect, and the code to reset are not sent

  I just got a new laptop lenovo yesterday, I've set up and it was perfectly fine, I've been in and out of her signature today without any problem, until that earlier. I stopped him an hour ago and now I can not connect, it is said that the pasaword is incorrect when I know it's because I can connect anywhere else for what is right. I tried to reset my password several times but I do not get a code.

  The cat has worked.  Turned on emails telling me that a reset code would be sent received in my Inbox, but the emails with the codes have been sent to my spam folder.

  Thanks for your help!

• Aspire driver V3 - 772 G Windows 8.1 USB 3.0 problem

  Hi all

  I bought my V3 - 772G 1 months ago about.

  Yesterday everything worked well and today, I noticed that none of the 4 USB ports were working (laptop was suspended since yesterday)

  No USB not connected, nothing. Key/mouse USB/hard drives /... does not work.

  I noticed that in Device Manager, I had problems with the ' USB 3.0 eXtensible Host Controller Driver "that the driver was not loaded. I've seen people online saying to uninstall and restart the computer. That and once again no operation USB, Device Manager, the device with problems was now "Compliant Host Controller xHCI USB".

  I tried WITHOUT success to the following:

  -Downloaded ' USB 3.0 eXtensible Host Controller Driver "Intel has failed (available only for W7) - Web site

  -Restart windows full - same

  -Disconnecting the battery and power for a few minutes, restarted - even

  -Remove all USB devices (hubs and so forth), restarted - even

  -Uninstalled all updates of 2 days before (to the point that I know that it worked) - pilot months before change - same result dates

  -Tried to search the BIOS to disable USB3.0 and put 2.0 - not found

  -Tried to get back to another restore - point na not work, complained that the disc is maybe damaged

  -Widnows run chkdsk/r several times - no error found - nothing resolved

  -Run chkdsk/r - stuck at 16%, but I guess that needs all night (TODO) - solved anything

  -Tried to do a repair without losing files (using recovery partitions) - always guess how

  Any idea or any help? They just stop working. I plug laptop already with windows 8.1 and they worked for 1 month

  Thank you

  -UPDATE1-

  I used the command-line (via recovery windows at startup) and copied all the files from backup drive (I assume) X:\Windows\System32\Drivers\usb* on the local drive C:\Windows\System32\Drivers

  Rebooted - still nothing

  [Solved]

  Here's what you can try:

  (1) ensure that the ntbtlog.txt file located in C:\Windows it is removed (to clean the logs)

  (2) to activate the startup log check which driver loading fails:

  Option A:

  (1) open administrator command prompt

  (2) write "bcdedit/set {default} bootmenupolicy legacy" to allow the start of legacy with F8 (don't forget to change the settings after this guide)

  (3) reboot and press F8

  (4) select this option to start with active log

  Option B:

  1) press "WIN + R" and write "msconfig".

  (2) in the Startup tab, select the option "Startup journal."

  (3) to apply the changes and reboot (remember to change the settings after this guide)

  (3) check the drivers failed in the log (C:\Windows\ntbtlog.txt) file (in my case I got "ucx01000.sys" driver failure)

  (4) after researching online (Source) I saw the USB3.0 stack consists of 3 files of accommodation with the xHCI Host Controller: Usbhub3.sys, Ucx01000.sys and Usbxhci.sys.

  (5) restart the laptop and press 'ALT + F10' to enter in the menu ACER recovery

  (6) select "Troubleshooting", then "Advanced Options", then "Command Prompt"

  (7) you will be located in the "X:" drive and the folder "system32" of the recovery unit

  (8) write "cd drivers.

  (9) "copy write Usbhub3.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (10) "copy write Ucx01000.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (11) writing "copy Usbxhci.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer 'Yes')

  (12) write 'exit '.

  (13) restart your laptop, and you should be able to use USB again

  (14) disable the startup option if you used Option B.

  In my case, the "Ucx01000.sys" file was missing in the drivers folder.

• Windows 7 drivers for a1730N desktop

  Hello-

  I have a desktop HP a1730n and that you want to upgrade to Windows 7, but the drivers for this product support page says that Windows 7 is not a supported operating system.  Does this mean I can not upgrade my computer to Windows 7?  Will Windows 7 drivers here in the future and if so when?  The pilots current Vista works with Windows 7?

  Thank you.

  Hi efish,.

  Let me see if I can answer all your questions. When there is no drivers on your HP software & driver page, it means that HP is currently not drivers for this operating system for your PC model. Sometimes it's because of the drivers HP are not made or tested on systems that are not designed for any other OS, and sometimes, that means that HP got not only to provide drivers for this OS for your PC. In your case, because your PC is two years old, it's probably HP doesn't provide Win 7 drivers for your PC. But this does not mean that you cannot upgrade to Windows 7 on your own with a new installation of Microsoft. Many of your drivers will be charged by the Win 7 system, but for those devices that do not work after the installation, you can usually find the drivers on the web site of the original equipment manufacturer. For example, if you have an NVIDIA graphics card, NVIDIA.com will provide a driver Win 7.

  Your current Vista drivers will probably not work in Win 7, but it is difficult to say with certainty because some software and drivers are compatible, so it's really a case by case basis. But it is best to just assume that they work and then find the drivers that you know will be.

  Now, to help you find the drivers for your PC. Here are a few that you will probably need if you upgrade to Windows 7:

  Chipset & Graphics - NVIDIA GeForce 6150 THE

  Sound - Realtek ALC 888 (select "High Definition Audio Codecs" and go to the driver with your Win 7 driver page).

  Oh and for reference here is a copy of your specifications a1730n.

• How to recover the administrator password in windows 7 via USB

  I have a HP netbook mini and need to how do to recover the administrator password in windows 7 via USB that we forgot and had to load itunes from another Iphone.

  Hello

  You can use a utility to reset as in the free sample on the link below - using another PC, this can be created on a usb flash drive.

  http://pogostick.NET/~PNH/ntpasswd/

  Kind regards

  DP - K

• My laptop rpet device usb can perform better when there is nothing connected and it does again and again

  can someone help me I have a laptop running xp win at the time where he continues to start and starts the programs he started to appear the box that indicates the usb device can perform better. The problem is no usb devices are connected and it appears again and again. I uninstalled all the USB in the device manager then reboot, it finds all the usb and begins to do it again. I think it might be an update but do not know about you.

  Ok. try to uninstall the current usb drivers and reinstall.
  Use the good day updated USB 2.0 driver.

  reference http://msdn.microsoft.com/en-us/windows/hardware/gg487327.aspx

  pls make sure there is no virus infected on your system.

  Thank you!!

• the desktop pc Pavilion 500-164 to date of Windows 8 for windows 8.1

  My dealer told me that the 500-164 Pavilion had windows 8.1.  This isn't.  Even if the Assistant on HP site says that it has not been tested, has anyone successfully done?

  Hello:

  I do not have your PC but I don't see any reason why it wouldn't.

  HP provides W8.1 drivers for this model on its support page.

  Before moving to W8.1, I'll make sure to create the W8 recovery media so that if for some reason, something doesn't work well in W8.1, you can restore the operating system and software from the PC to its status of "out of the box.

  And you should do anyway even if you do not upgrade to W8.

  Check out this guide to make your W8 recovery media set.

  http://support.HP.com/us-en/document/c03481733

• Necessary drivers for HP Pavilion 500-267c Windows 7 Professional 32-bit

  Hello

  I upgraded my HP Pavilion 500-267c windows 7 Home premium 64-bit windows 7 Professional 32-bit.  I need all drivers of base.  I couldn't find anywhere for HP pavilion 500-267C windows 7 32 bit prof.  Help, please!

  Drivers for Ethernet controller network controller, device PCI Simple controller PCI Communications, audio, graphics, etc.

  Your help is greatly appreciated... Thank you in advance...

  Daniel.

  Hi, Daniel:

  There is no 32-bit support for your model.

  You have to experiment with the drivers of business models and of drivers from the Internet sites of the Lim component material.

  You can try these for starters:

  1 chipset driver. First, install and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  2 the graphics driver.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23638&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  3. audio. This one, I'm not sure, and you never have the audio to work (try to update the Device Manager and the Auto search box once you can connect to the internet).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19282&keyword=IDT&DownloadType=drivers&lang=eng

  Network: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128686-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0007

  PCI Simple Comms:

  Try windows update of the device.

  USB 3.0:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB+3.0&lang=eng

• need the drivers usb 3.0 for Pavilion 15-e013nr windows 7

  Hello, I have recently downgraded from Windows 8 to 7 on my Pavilion 15-e013nr. I can't find the drivers for the USB 3.0 ports. Also, I was not able to find a driver for graphics card for the AMD Radeon HD 8350 G came with the laptop. One of these drivers available for this product and the operating system out there? Thank you for your time Justin

  Hi, Justin:

  You must first install the amd chipset driver and restart. You want the first file on the Web page.  Who will install the smbus controller.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then to the graphics driver, you can try this...

  Download but do not run the driver beta amd from the link below.

  http://support.AMD.com/en-us/download/mobile?OS=Windows 7-64

  Download and install the free utility 7-zip file from the link below.

  http://7-zip.org/

  After installing 7 - Zip, right-click on the beta amd graphics driver you downloaded, select 7 - zip, and select it to unzip the file in a folder. I leave decompress the file name, so it's easy for me to find.

  After do you, go to Device Manager, click to expand the category of display cards, click on the standard VGA, click the driver tab, click on put to update driver.

  Select her browse my computer for driver software method, then click on let me pick from a list of drivers for devices on my computer, and then click disk.

  Access the AMD beta driver folder 7 - zip created\$ _OUTDIR\Packages\Drivers\Display\WB6A_INF\CU165580, and select the AMD Radeon HD 8350 G graphic card in the list and the driver should install.

  For usb 3.0:

  Install these two drivers:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Need USB 3 Windows 7 drivers for HP Pavilion 17-e016dx

  Anyone know the correct drivers to install Windows 7 drivers for usb 3.0?

  I don't miss the old days, when you can just download the drivers from the seller... no wonder that HP losing market share

  Hello:

  Install the AMD chipset driver and restart.  USB 3.0 drivers are probably not automatically install in your model.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Read this thread below on how to obtain these drivers installed on your model. Try my method first and if that does not work, try method posted by NAP_CHL_IT.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/driver-for-HP-M6-k010dx-for-ACPI-HPQ6007-on-Windows-7/m-p/2891907#M145254

  In addition, you may have to restart the laptop again and repeat the manual procedures listed, I learn.

• Pavilion of 500-164 usb controller driver

  I have a 500-164 Pavilion on which I have installed win7 because win 8 is... Well, lets not go. Now, the usb ports do not work. It is said that there is no driver. This driver does not work?

  BTW, some ports are labeled SS E (where E is the simbol of wireless USB) and some are just the E (without SS in front). Is this a new USB type?

  The keyboard and mouse only function in the ports of E. a key drive will not work in any of them...

  Hello:

  You probably need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-104117-1&cc=us&DLC=en&LC=en&OS=4063&product=5231479&sw_lang=

  .. .and this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-105965-1&cc=us&DLC=en&LC=en&OS=4063&product=5231479&sw_lang=