Bluetooth mouse and keyboard hesitant

Similar Questions

• USB mouse and keyboard suddenly stopped working

  My USB connected Microsoft USB Bluetooth mouse and keyboard suddenly stopped working today. After researching everything I could, I didall that I could find as a possible solution that has been:

  • Update of the chipsets
  • Uninstalling usb in Device Manager and reboot devices
  • Updated via Device Manager, usb devices
  • Reformatting and reinstalling Windows 7
  • Stop, unplug and allow the card mother "reset".
  • Try multiple ports
  • There is no 'connect' button on my mouse so I can not sure try this
  • Replace the batteries in my mouse
  • Obviously both devices have been connected
  • Updated the software for the mouse

  I have tried literally everything I could think of or read previously and I am out of options. Oddly enough however, after reformatting and reinstalling windows, my USB storage device is found and is working, but the keyboard and mouse are not. Please don't bother not suggest anything I listed above, I obviously already tried and found no chance.

  Update
  I have solved my problem. For later use, if anyone has this problem and no other solution seems not work; That's what I did.

  I bought a USB 2 ports PCI card and installed in my computer, then go back to Windows XP. While my original front and rear USB ports still recognize a flash drive, they do not recognize the keyboard or USB mouse, make ports PCI card. I had also updated ALL the updates of windows on the site, not the auto update available on the desktop. Although I don't know the cause, I am certain that somewhere, something was is altered by the hardware or software, and my default USB ports do not recognize mouse or keyboards.

  Another piece of knowledge in case anyone is interested; I use a card mother gigabyte s-series and my nvidia video card GeForce previously is no longer recognized in the port, it would cause my computer go into a State of hibernation and the monitor would go into "Analog Power Saving Mode". The only solution was to spend a friend with my video card. (Its graphics card is a GeForce 9800 GTX, mine was a GeForce 9800 GT. No reason why it should make a difference.) According to me, even if my computer is less than two years old, I was sold a bad mother. I read online cases in other forums for technical support of people having the same problem. Gigabyte motherboards stop random ports for no known reason.

• Bluetooth Arc touch mouse without being detected by the "mouse and keyboard Center."

  The mouse is paired with your PC via bluetooth and works very well.  (Please re-read that last sentence before you send information on how to pair.)

  However, when I open the Microsoft Mouse and keyboard Center, it says "no device detected".  For example, I can't change the settings of the mouse. There are the most annoying rattling noise that I would turn off.

  Have uninstalled Microsoft Mouse and keyboard Center, reinstalled latest version. IM using windows 7.

  Hello Frazer,

  We want to get this support, please follow the steps on how to solve Microsoft Mouse and keyboard issues:

  1. run the hardware store in Windows 7.

  2 steps on how to install the driver in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check run this program in compatibility mode.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  Let us know how it goes.

  Kind regards

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Mouse and keyboard Microsoft Wireless Comfort 5050

  Mouse and keyboard Microsoft Wireless Comfort 5050 will work with my MAC

  With due respect, look at the configuration required for the keyboard and the mouse and see if your iMac has the bare. You can find this information by clicking on https://www.microsoft.com/accessories/en-us/products/keyboards/wireless-comfort-Bureau-5050/pp4-00001 #specsColumns - testCarousel

  My guess is Yes, but you were not specific about which iMac you have so I can't say for sure.

• Mouse and keyboard no longer work after fixing drive dvd - Satellite A100-147

  My DVD Player wasn't working, so I fixed it with the help of some advice from a forum: go to regedit to remove the 'previous' and 'high' or something, I have a catalog specified.

  But then the keyboard and the touchpad is dead in Windows. Nor can I use an external keyboard and mouse.

  I tried to start it in safe mode and with the last settings that worked. None succeeded. Apart from the fact that the keyboard actually works to make choices, therefore, a question Ms.

  Ideas/fixes would be greatly appreciated.

  Computer: Equium a100-147
  OS: XP media center w/sp2 (I think)

  Maybe you deleted the upperfilters wrong or additional / lowerfilters?
  The correct key is {4D36E965-E325-11CE-BFC1-08002BE10318}

  Boot safe mode.
  Go to control panel-> Add/Remove Programs control
  Uninstall all software Mouse/touchpad/keyboard/logitech that can be installed
  Go to Device Manager
  go to view - > click on 'show hidden devices '.
  Delete all devices under "mice and other pointing devices" and "keyboards".
  Reset.
  XP should detect the mouse and keyboard and install the drivers.
  Download and install the driver for the touchpad to the A100 section drivers on the Toshiba site

• 23-1000 all-in-one Pavilion: mouse and keyboard stop working

  I had my all-in-one since end of February 2016 - bought at Best Buy local - touch screen pc works still but don't do me any good because the mouse and keyboard do not work after 3 months of excellent performance.  Both have new batteries.  Can be signal problem because I've set up wireless.

  Help - frustrated and have no idea what to do.

  Thank you

  Terry Anderson

  Hello @MaggiesMimi,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the keyboard and the mouse.  I understand that they both stop working recently, and you have already replaced the batteries.  I can certainly help you with this!

  First of all, try to review the following document and let me know how it goes:

  HP PC - keyboard and wireless mouse troubleshooting

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Ergonomic mouse and keyboard L5V 00001

  Hello everyone.

  I bought ergonomic mouse and keyboard a few weeks back.

  Somehow my usb transceiver was damaged, and the keyboard and mouse don't work anymore.

  Can someone help me out is there a way to get the new transmitter/receiver that can be synchronized to the mouse and keyboard?

  Thank you

  Hello

  Unfortunately for additional assistance, you will need to contact the support Microsoft Hardware here:

  https://www.Microsoft.com/hardware/en-us/support

  Kind regards

• Microsoft wireless mouse and keyboard

  When I scroll upward or down with the mouse, the result is delayed by a second or two. Otherwise, works well.

  Hi RobertBoivin,

  1. you have made no changes to the computer before the broadcast took place?
  2. what operating is installed on the computer?
  3. What is the number of the model of the mouse and keyboard?

  Method 1
  Try the steps from the following links:

  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Method 2
  If the steps above fail, then I suggest you to update the mouse drivers by selecting the model number of the mouse from the following link:
  http://www.Microsoft.com/hardware/en-us/downloads

• All USB ports not working doesn't no causing of mouse and keyboard doesn't work either (considered the source of the problem). Need help fixing without using the mouse or the keyboard.

  None of my usb ports work, and I can't get my mouse and keyboard to respond.  The computer will start, but none of the usb ports work, and I don't have the use of a mouse or a keyboard works through all the patches.  Help!

  I have PS/2 ports, but no mouse PS/2 or a keyboard... did not have those last few decades and don't know anyone who has these features more

  $6.36 (free delivery if you have Amazon Prime, otherwise on $11 including shipping): http://www.amazon.com/V7-Standard-PS-Keyboard-KC0A2-4N6P/dp/B007R9YV0C/ref=sr_1_1?ie=UTF8&qid=1372529682&sr=8-1&keywords=ps%2F2+keyboard

  during boot, or perhaps in Safe Mode

  Assuming that your keyboard works during boot (and it should; trying to tap F8 to access Advanced Boot Options Menu), probably the simplest method would be to make a Hiren Boot CD, boot from it and use one of the many included tools.  I have not experienced with your particular situation, so I can not tell you what tools will be or will work for you, but my guess is that USBDeView might work.

  Description: http://www.hiren.info/pages/bootcd

  Download and burn (copied from ElderL):

  Download the Hiren ISO here (download important enough but worth it).

  http://www.hirensbootcd.org/download/

  I like to use ImgBurn to create a bootable ISO CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask Toolbar (ever).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  Thanks for all the help. Seems that there is no easy 'reset' for bad hardware configurations.

  However, I dug to the bottom of my Lac 'tech' and found a USB-to-PS/2 adapter, which allowed me to use the USB mouse into the PS/2 port and reactivate my USB ports.

  All is well now.

  Thank you all for your answers!

  Kind regards!

• Mouse and keyboard no longer works in Windows XP Media Center edition

  I moved my Gigabyte Media Center and start the keyboard and mouse are are suddenly stopped working. Works very well to access the BIOS key and F8 for safe mode - has also no feature mouse keybpard or. So with any form of Windows I have no input control. It is not a problem with the keyboard because it works in start mode. Tried other mouse USB and keyboards all to nothing does not. There are no PS2 port on the machine. I found a few examples of this anomaly on the web, but no real answers. It looks like windows for mouse and keyboard drivers are corrupt? But how can I get reinstall - machine is defunct Evesham, I don't have a recovery disk or a serial number. Any help would be accepted with gratitude!

  Hi Keith,

  Thank you for your response and keep us updated.

  I suggest you run the fix from the link next and if it helps.

  USB devices stop working in Windows XP Media Center Edition

  http://support.Microsoft.com/kb/890546

  If the problem persists, feel free to let us know. We will be happy to help you.

• my wireless mouse and keyboard do not with windows xp after you install a new battery.

  my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.

  Hi nwecker,
   
  -What is the brand and model of your mouse and your keyboard?
   
  If the keyboard and mouse are Microsoft, here are some links that you can give a try on:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Solve the lack of response from the keyboard or the mouse wireless after weeks of typical use

• Wireless USB mouse and keyboard no longer works when disconnected and then reconnected. Cannot connect to system to be solved.

  

  I am facing a problem on my XP machine.  Here is what happened...

  I unplugged all devices and USB keyboard and mouse USB in order to move to another office.  Then I put everything back in place, then started my machine.  Mouse and keyboard not responding do not, so I can't connect it to resolve the issue.  Tried in safe mode without success.  My mouse and keyboard are made from Microsoft and are wireless.  Unsuccessful despite everything I try.  Any ideas?

  Hi Nascarfan48,

  Thanks for the update. We recommend that you check if this article helps you fix the current number:http://support.microsoft.com/kb/258826

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mouse and keyboard not working only not to the login screen

  Hi, I was recently infected with Antispyware Soft virus. In my attempt to remove it, my screen went black, so I had to restart my computer. Entering my login screen, I was unable to connect because my keyboard and mouse no longer works. I tried to start the safe mode too and they still do not work on the login screen. However, they work at the start of the BIOS. I looked around, but I couldn't find any option for Legacy USB drivers. I went to a few USB option and select [Enabled] and it still doesn't work to the login screen. I have no PS2 port, so I can't try it. I was also able to use my mouse and keyboard when you attempt a repair of the system to do a system restore, but that solves nothing. I am at a loss what to do. I hope someone is late, as I'll be gone tomorrow/more day late today. I am writing a computer laptop and unable to remember any care my office except the fact, it's Windows Vista.

  Hi HellMuT1,

   
  We recommend to use a different mouse and keyboard, then check the result. If the problem persists, try the following steps.
  1. Insert Windows Vista DVD.
  2. restart your computer.
  3. let the computer restart (boot) from the DVD.
  4. If you are prompted, press a key to continue.
  5. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
  6. do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  7. make sure that the appropriate operating system is selected, and then click Next.
  8. After you click Next, the System Recovery Options menu appears.
  9. click on command prompt.
  10. type devmgmt.msc and press enter
  11. on the window Device Manager, in the object list, expand mice and other pointing devices.
  12. make a right click the sub element and click on uninstall.
  13 expand keyboards.
  14. make a right click the sub element and click on uninstall.
  15. Type exit and press ENTER to restart the computer.
  16. remove Vista DVD and restart the computer to see if the keyboard and mouse works fine.
   
  Do the repairs to the system of Windows recovery environment
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless mouse and keyboard does not

  I downloaded DriverHound, scanned and 73 drivers who need updates. I downloaded the new sand pilot went to automatic installation. Never completed facilities and the mouse and keyboard stopped working. No problem with the monitor. I put charges batteriesin the mouse and keyboard, deleted/replaced the USB connection without success.

  I'll send this to my laptop which is not downloading from DriverHound. Computer is h9 - 1270t.

  Hello new WDJ37,

  I provided you with the HP support document: using HP Support Assistant (Windows 7), who will explain how to use software that will automatically update your software and drivers from HP. I am also including a link to the HP Support Assistant so that you can download and install the latest version of the software on your computer.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!