Bluetooth USB dongle frustration

Similar Questions

• Satellite A205: Bluetooth USB dongle will connect is AirCable

  I plugged a dongle Bluetooth USB generic on my Satellite A205 and used for several hours over a period of three days to connect to a Bluetooth Serial AirCable to run my telescope controller. The generic dongle worked after downloading a stack of Toshiba.

  Whenever I turned the Bluetooth it incremented COM port numbers
  My telescope controller will not recognize the Comms above 20 so I deleted the Comms that really were not used.

  Connects the USB Bluetooth dongle is no longer the AirCable Bluetooth series. * It worked before and will not work

  I tried three Bluetooth USB dongles different, including TrendNet, AirCable and credits.
  I can not connect the telescope controller AirCable series Bluetooth with all the dongles.

  _ * Someone can suggest a monitor Bluetooth that will work, or suggest a way to get my A205 to work with one of my Bluetooth USB dongles? * _

  Don

  What battery Bluetooth has been bundled with your Bluetooth adapter?
  You must use it. If it was the Toshiba Bluetooth stack while I would use the custom Mode of it to set up the COM port that you like, for example, COM6.

• Problem of Dynadock U using Bluetooth USB dongle

  Hello

  I have a U Dynadock, used with a Lenovo SL500 32 Vista family. In the last four months, I got a dongle Bluetooth USB Kensington plugged into a USB port on the back of the Dynadock. My laptop had no problem finding, turn on the Bluetooth radio and allow me to pair it with a helmet.

  I had to plug everything back in after an office move (I did not remove the dongle) and now my laptop cannot find the dongle. I tried it in different locations on the nothing helps Dynadock USB, and I also checked that the dongle is still working by plugging directly on my laptop and connect it to my helmet.

  Any idea what could have gone wrong?

  Thank you
  JN

  Thanks for the comments

• Cannot use Bluetooth USB Dongle with Satellite P100

  A few months ago, I bought a dongle Bluetooth USB of Marks & Spencers. He says it's a Bluetooth 2 product. When I put the dongle into the USB port I can see no problem with drivers & Bluetooth in my device manager but I am still not able to see Bluetooth anywhere else on the computer and my phone is unable to find t.

  I was not able to load the software which accompanies it as sound does not seem compatible with windows vista. My laptop is Satellite P100 - 160.

  Can someone please tell me what I am doing wrong & what do?

  Thank you.

  You must have at least version 5 of the Bluetooth stack in oder to use it with Vista. Please check your site to sellers of laptop computer for her.

• Download stack Bluetooth USB dongle for Windows 7

  I have a Toshiba USB bluetooth dongle. The software will not be installed using Windows 7 and the dongle doesn't work at all on my PC. Download only that I could find for the software was for Toshiba laptops! Where can I download the software and drivers? I have to say that support for the updates of Windows 7 is very poor or very well hidden. Why is the only free battery for portable computer users? Have to avoid in the future products of Toshiba because the support appears to be nonexistent. Any help would be appreciated.

  > The software will not be installed using Windows 7 and the dongle doesn't work at all on my PC

  As I understand it, this software is designed to run under Xp/Vista. Right click on setup.exe and select Properties. In properties, select the Compatibility tab and you will see, Compatible mode.

• Bluetooth V2.0 usb dongle does not find the drivers with Windows Vista

  I have an Acer Aspire with Vista Basic & necessary 5536 a USB bluetooth dongle, so I could connect my laptop & mobile phone. I bought one and tried to install it, but alas, it says that the drivers could not be found, so make the useless USB dongle. I can doesn't seem to find any resolution of the problem of driver & I was wondering if it was possible to find a solution or just throw it out & drop...

  Any help would be greatly appreciated. Thanks in advance,

  Jase...!

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not resolve this the manufacturer of USB dongle for advice

• Acer XC-605. I have a wireless usb device and a usb dongle. Can I replace my w wireless card

  Acer XC-605. I have a wireless usb device and a usb dongle. Can I replace my card without extra wire with usb3 Sockets. If so, should what material I go for? Front Sockets have been botched again and are now worse thn useless. Thank you.

  Thanks Asdfguy86. The map you suggested was not good because it was full of size, but, thanks to your liknk, so I knew what to ask and what seearching I just added "low profile."

  My search came up with this https://www.amazon.co.uk/gp/product/B008N3FPXS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

  This has also been enlarged but came with an alternative mounting plate.

  There is a free space above so I was able to move my antenna wi - fi so far and release the slot for pci express to the new card usb3 so I was even able to keep my embedded wireless and bluetooth. What a result!

• Driver USB dongle v1.74

  Hello

  I need a driver for USB dongle v1.74 for windows 7 64 bit.

  (1) you can see, if your dongle is supported with windows 7 or not, see link below

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=win7&Type=Hardware&CurrentPage=0&TotalPages=24&SortCriteria=Relevance&ShowCriteria=0&Compatibility=Works&TextSearch=bluetooth%20&ProductName=bluetooth%20&LastRequested=9&Locale=en-us

  1 (b) allow all USB ports and USB controllers in the BIOS

  1 c) download and install the latest CHIPSET driver

  (2) simply insert your dongle Rhapsody of the usb ports high speed back.

  and wait a few seconds, pilot of the dongle will be install automatically, otherwise install

  Go to step 3

  (3) go to START - RUN type DEVMGMT. MSC enter, then find the unknown device

  (4) make a right click, and then click Update driver software over the internet

  Restart your system

  Guilbert

• Equium - Windows cannot load the device driver for USB dongle

  I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  -what it means and how can I solve this problem?

  Hi Ozcat,

  What USB dongle is that exactly?
  What cell phone do you have?
  What operating system is installed?
  Have you already tried to reinstall the driver for USB dongle?

• Question about an external Bluetooth USB device

  Hi all!

  I would like to ask help from anyone on this forum for this question. Recently, I used an external Bluetooth USB device, the product name is IVT Bluesoleil, is this product safe for my Toshiba laptop?

  Should be no problem.

• USB dongle Wifi taking supported 802. 1 X

  I need a Wifi Dongle USB that supports the Protocol from 802. 1 X.

  The specific problem I am solving is that I am in a place of dead wifi in the office.  10 ft away the signal is very good.  I want to plug a dongle wifi at the end of a 10-foot USB cable to receive good reception.

  Wifi office using 802 Protocol. 1 X so not all USB Dongles work.  I bought an Edimax EW-7822UAC, but it does not support the Protocol from 802. 1 X on OSX.  The source of this information is the Edimax support person I spoke on the phone.  He said that nothing the Edimax wifi dongles support 802. 1 X on mac (support on Windows).

  Assuming you mean 802.11 x wifi is a standard. A dongle 802.11 x wifi isn't different protocol-wise of your bed in your computer wifi card.

  The difference is required to push the dongle usb drivers. Some dongle manufacturers only create drivers for Windows. If you choose a dongle manufacturer that provides Mac drivers to enable the dongle work with your MacBook Pro.

• Satellite P10 and Netgear USB dongle use

  Hello

  NETGEAR insist it is a Toshiba system problem...

  Whenever I try to inslall wg111v2 cherif I get... Failed to install... "RegDBCreateKeyEx failed", and/or... "cannot read the control on the Netgear server file.

  I don't have this problem with my other non-Toshiba Office.

  HM, looks like some related software question, but it s easy for netgear say you it s a problem with toshiba. It is like moving around customers as on a chessboard. :(

  But okay, now you´re here and we all will try to help you. You say you don t get the problem on your machines 'NON-TOSHIBA.

  So, I would say that you should first try to recover your machine with the recovery media, and then try to install the USB dongle. If it really works then it was just a problem of software and it s resolved but if not then come back and we'll see the next today.

  Good bye

• System crash when you use Reliance Netconnect USB dongle

  Hello

  Yesterday, I bought a Netconnect Reliance USB dongle.

  When I connect it to my Lenovo IdeaCenter B500, it gets recognized and drivers are installed.

  But when I click on the 'Connect' button on the NetConnect software, my system hangs.

  What happens every time. The blue ramdump is displayed. And I was able to note the following message is displayed:

  IRQL_NOT_LESS_OR_EQUAL

  I also have the ramdump file.

  All the world is facing a similar problem before?

  Any ideas how to proceed on this?

  Kind regards

  Kishore

  Bangalore, India

  Dear customer, This is to inform you that your concern has been noted. Please share with us your phone number so that we can reach you. Our team is eager to help you. See you soon,. RCOMcare

• For Microsoft Wireless Keyboard and Mouse 5000 USB dongle

  My USB dongle for wireless and mouse 5000 keyboard broke. Where can I find a new dongle?

  Try here:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  I'm not sure that they will be able to replace the dongle only, I believe that the dongle and the material is matched or paired to work with each other, that way you don't end up controlling a mouse or a keyboard in another room...

  John

• USB Dongle Bridge with wireless static IP XP

  My computer is connected to the wireless router that is connected to the switch through which I am to access other computers.

  Whenever I connect my USB dongle to access internet, my offline wireless network but I am still connected to the router!

  Here, I'm limited to use only one network at a time.

  I tried the network bridge, always even (no advanced layout need to be changed?)

  Tried to ICS (ICS should not use this feature in an existing network with domain controllers Windows 2000 Server, the servers DNS, gateways, DHCP servers, or systems configured for static IP addresses)

  
  

  I'd be very happy that can help solve this problem.
  Thank you
  Lachuu
  OS: Windows XP
  Dongle USB: HUAWEI

  Your problem is probably the "metric".  I'm doing this from memory because I don't have a machine XP here, so maybe it's a little different but...
  Go to your network control panel.  There should be an entry for your USB dongle and the other for the wireless.  For each of them, right-click on it and select "Properties".  In the window, scroll down if necessary, and then double-click TCP/IP.  In the next window, click on "Advanced".  There should be a box here that is usually checked that says "Automatic metric.  What you need to do is to uncheck this check box and enter a number in the field "the Interface metric.  Put a different number for your USB dongle interface and your wireless (for example, 5 and 10) interface.  The smaller of the two numbers will be the adapter that will be used for the internet... so if I read your post correctly, the USB dongle must be the lowest numbers.

  As your USB dongle is probably the slowest connection, it probably by default a metric higher and therefore is not selected when you use the default settings.

  "An explanation of the feature of Automatic metric for the routes of the Internet Protocol"
    <>http://support.Microsoft.com/kb/299540 >

  Good luck
  JW