Bluetooth using RFCOMM Sockets

Similar Questions

• Activate Bluetooth using the wireless switch?

  Hello. Mine is Inspiron N5030 Laptop (New). When I try to install the driver of the blue tooth, he asks me "Turn on Bluetooth using Wireless Switch". I tried press f2 & fn + f2. But no change. I went to the BIOS and everything was correct and active. How can I get rid of this problem? Please help me!

  Meanwile: Problem solved

  The problem was not the bios, but the new installation of Windows that has used the wrong device.
  Directly linking the R273948.exe Dell driver has not solved the problem

  I did the following steps:

  1. make sure that Bluetooth is enabled in the bios

  2 removed the generic bluetooth device in Device Manager

  3. manually added the bluetooth device in Device Manager (for me it was the 365 dell bluetooth module)

  4A ran update 'setupbluetoothDFu in the unpacked R273948 driver.

  5. install the driver R273948

  Worked for me.  (Dell N5010 wind 7 64 Premium bios A12 version wow)

  Good luck

  Luke M

• How to activate Bluetooth using the switch wireless on dell inspiron 3542

  When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop 'Dell inspiron 3542 run ms windows 8.1. Please help me!

  How to activate bluetooth dell 3542

• How to activate Bluetooth using the switch wireless on dell latitude e6420 (early 2011)

  When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop "Dell Latitude e6420 run ms windows 8.1". Please help me!

  Your variant of the system doesn't have the Dell Wireless 380 card and that's why it will fail to install.

  Install.

  A21 OF THE BIOS:

  http://downloads.Dell.com/FOLDER01853317M/1/E6420A21.exe

  See notes about the update of the BIOS http://dellwindowsreinstallationguide.com/updating-the-bios/

  Free fall sensor:

  http://ftp.Dell.com/FOLDER01679418M/5/St-MICRO_FFS-LNG3DM_A06_V6681_setup_ZPE.exe

  Intel Chipset Device Software:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=Intel%20chipset%20Software%20Installation%20Utility

  Intel Management Engine Interface driver:

  http://downloads.Dell.com/FOLDER01232584M/2/SWB_DRVR_ME7P1_5M_7_1_70_1205_MR_A05_SETUP_ZPE.exe

  O2 card reader Micro:

  http://ftp.Dell.com/FOLDER01481873M/1/Chipset_Driver_CY8D1_WN_3.0.08.18_A01.exe

  Utility Intel Identity Protection:

  http://downloads.Dell.com/FOLDER00705710M/1/Chipset_Driver_NGH46_WN_1.2.27.0_A05.exe

  Intel Wireless N-6250:

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm

  Intel N-6250 Bluetooth:

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034060.htm

  Touchpad:

  http://downloads.Dell.com/FOLDER01669864M/1/Input_Driver_VW486_WN_8.1200.101.134_A07.exe

  Audio

  Integrated

  Driver Intel Ethernet:

  http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/24198/A08/LAN_Win8.1_64_19.5.exe&lang=eng&DwnldID=24198

  Intel Video:

  http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/24329/A08/win64_153330.exe&lang=eng&DwnldID=24329

  Video NVidia:

  http://www.nvidia.co.UK/download/driverResults.aspx/80210/en-UK

  Intel Device Manager Diagnostics utility:

  http://downloads.Dell.com/FOLDER01433785M/9/DIAG_Network_Intel_A09_x86-6DDVX_setup_ZPE.exe

  Application of Control Point System Manager:

  http://downloads.Dell.com/FOLDER35332M/1/APP_WIN_R312259.exe

  Let me know if all errors remain in Device Manager.

• How to use the Socket for AS3 networking?

  Hello, I'm a Flash game and have successfully obtained the RTMFP to work, but it is not very reliable and has a little loss of packages inside. I've heard many people only using TCP (socket), it is much tighter, but I have no idea on how to do it. I've Googled it many times, yet I really can't seem to find a clear answer. I hear you must have a server... How do you get one? Is it possible to make your own simple server that people your LAN can play? Thanks in advance.

  Yes, you can make your own simple server using the ServerSocket class and connect with the Socket class. And then you have TCP... it's actually pretty simple. Discover the ServerSocket docs to start, and there are also many examples if you googled around.

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/NET/ServerSocket. HTML

• Use of socket in CS5 JS

  Hello.

  I got this request in another post, but it is hidden under an inappropriate topic, let so first apologized me for duplication. I'll remove the other post.

  In any case, I'm eager to open a http socket and post a message to a php page that connects to my mistakes and sent me e-mails.

  I can do this by using a JS-> Applescript-> shell script using the doScript method, but I need eliminate the need for a Mac.

  I can use the socket method to return data from a html page returned using a provided API, successfully so I know that the reception is possible, but perhaps there is a restriction on sending an argument.

  Here is the code that I use, it is a page on a live server, so if something is successful, it will be validated, and I will receive emails! Not that I don't mind, I just wanted to say.

  function combinedErrorReportWithSocket (errorText) //errorText is something like "library not found".

  {

  = myServerAddress ' automation.yappp .net: 80 ";

  errorText = encodeURI (errorText);

  Conn = new Socket();

  Conn.Open (myServerAddress);

  Conn.Write ("GET sendSrcError.php? e =" + errorText + ""-HTTP/1.0\n\n "");

  response = conn.read (999999);

  Conn.Close;

  }

  If this isn't a proper way to go about this, can someone suggest an alternative? I don't want to stay away from Applescript function however.

  Thanks in advance

  To?

  Answer your original thread, I would ask you do not divide the wire in the future.

  http://forums.Adobe.com/message/3963488#3963488

• Can we pair it two iPad via bluetooth using the remote keyboard/third

  I intend to buy two of 'Presidential teleprompter' overall using two iPads.  It is possible to combine two iPad use keyboard / remote via bluetooth?

  There is not enough information on ""ikan ELITE-REMOTE Bluetooth iPad teleprompter remote control ", if the app could connect and simultaneously control two iPad ."

  He would be grateful if someone could suggest a solution.

  Thanks in advance.

  I think that the profiles of the https://en.wikipedia.org/wiki/List_of_Bluetooth_profiles#Human_Interface_Device _ Profile_.28HID.29 HID

  take only be connected to one device at a time

  for you to get what you want a program must be running on both devices, likely using the https://en.wikipedia.org/wiki/List_of_Bluetooth_profiles#Personal_Area_Networkin g_Profile_.28PAN.29

  Profile and then there is if it would be in violation of the rules of the sandbox in app store security but with 3rd party keyboard being taken in charge, it might just

• Satellite L655-1HC - how to disable Bluetooth using Win 10

  Hello

  I am using TOSHIBA SATELLITE L655-1HC, recently upgraded to 10 of Windows, but my Bluetooth is not be disabled.

  I tried everything, but no result at all. I think maybe it's like the driver support for Windows 7.

  How can I for me? or is there another solution to make of (the necessary key is missing, by the way).

  1. go to "Device Manager".
  2. in Device Manager, expand Bluetooth.
  3. right click generic Bluetooth adapter and update the driver.
  4. re-start.
  5. now you should be able to turn off/turn on the BT

• P1a42 high power Bluetooth use after upgrade of Marshmallow

  Everyone sees heavy use of Bluetooth power under details of power consumption (90% +) after upgrade to the marshmallow?

  I did a factory reset, but problem not solved. Also see nothing obvious (loopback, Dying, scanning, etc.) in the LogCat...

  I hope that Lenovo engineers see this also and a new update will fix this...

  Looks like the release of S272 resolved the problem of Bluetooth. Thanks devs!

• Only to get the pointer-nothing else; cannot be on/off switch. So, I use the socket on the wall?

  Can not get the computer; only to get the pointer so I turned off with the switch on the wall socket?

  Hello

  1. What is the brand and model of the computer you're using?
  2. what operating system is installed on the computer?
  3. any changes to the computer before the show?

   
  You can disconnect all external devices except the keyboard and mouse and check if you are able to boot to the desktop
   
  Method 1:
  I suggest you to start the computer in safe mode. Let us know if you face the issue in safe mode or not. Check out the link below to start the computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Method 2:
  I suggest you start WinRE (Windows Recovery Environment) and perform the Startup Repair.
   
  To start in WINRE and for more information about Windows RE view the following link.
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Once you start in WINRE try Startup Repair and check if this may help solve the issue, to perform the startup repair using the link below:
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions
   
  Also check out the following link:
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7
   
  I hope this helps!

• my bluetooth using engineering update driver then the MS bluetooth enumerator disappears DEV Manager, what has gone wrong?

  Blue tooth installed on the motherboard.

  Hello

  as allowing you to change the software of bluetooth 3rd party software I suggest you contact their Support

  or try this

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________________________

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  _______________________________________________________________________

  also run the sfc/scannow command if necessary

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  _________________________________________________________________________________

  and read this:

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct it contact the hardware manufacturer

• SSL/tls over TCP using tcplistner socket or a tcpclient

  I am trying to use ssl/tls, TCP, but in my code, the socket is used not a tcpclient or tcplistner. I searched on the net at least 200 links but I have not everything related that. I want to use less coding and fact ssl or tsll during the tcp socket connection. I have a client, server, certification authority, a key to the .key format. Please help with the example.

  Hello

  TechNet support team can solve your problem correctly since your question is beyond the scope of what is generally answered here.

  Kind regards.

• How to send a picture by Bluetooth using Windows 8-way

  I selected a photo via pictures tile, drag the right side and choose 'Sharing', I can't find the option to use bluetooth to send the photo to my friend who has the phone bluetooth...

  Note that I added my friend bluetooth device in the "Device" option to the forehand bar already...

  The current workaround is to use the old and no Windows 8 path via Office send the image via bluetooth... But this only defeated the purpose of showing what the new concept in tiles/Start of Windows 8...

  No idea how?

  Thank you!

  It is ACTUALLY how this in Windows 8... no idea what the other poster was thinking, but in most cases, there are a few thing missing in step by step preceding... as moving to the left does not bring to the top of the search appsicon.

  In any case.

  1. Add your BT device through Control Panel-> devices menu and make sure it is coupled.  THIS MUST BE MADE BEFOREHAND.

  2. in the window of your desktop, click on the Bluetooth icon in the notification area (you may need to press the icon of development according to the system icons How are present).

  3. Select "send a file".

  4. Select the device you want to send to, and then click Next. (this is why it needs to be paired FIRST, mentioned in step 1).

  5. you now need to select the window or files.  Locate the file you want to send; Click Open, and then click Next.

  6. If your device is not set to always allow, you will need to accept/approve receive the file on your device.

  7. click on finish once the shipment is completed.

• Problem setting Deskjet 460WBT Bluetooth using Windows 7

  I used a small travel-friendly in recent years Deskjet 460WBT printer now, together with my Dell laptop, connected via Bluetooth.  No problems.  Now, I have replaced the Dell XP OS with Windows 7 and downloaded the new Windows 7 drivers for the Deskjet printer.  However, the Dell laptop can't see the Deskjet bluetooth signal.  I tried using online HP support tech, but in vain. Same thing with Dell.  There is no specific indications of HP on the net for Bluetooth Configuration with Windows 7 on this printer, only for XP.  Also, I can print with it using a USB connection.  Someone has an idea how to re - install this feature for Bluetooth?  Thank you.

  JJ

  Message edited by jacjon on 02/11/2009 23:22

  Hello

  I have a printer HP "Officejet H470" similar, and I could easily put place and feel to it, using BlueTooth on my laptop with Windows 7.

  I'll share what I did with you and perhaps you might be able to get installed so yours

  1. Ensure printing is on and wireless turned on, press, i.e. the (if necessary) USB dongle is attached to the side of the printer on the USB slot.
  2. On your laptop, Windows7, Goto "Start", then to the "devices and Printers" (you may need to control panel to find it).
  3. Select "add a printer".
  4. In the "Add a printer" dialog, select "add a network, wireless or Bluetooth printer.".
     • Windows displays "searching for available printers...' and should eventually find your device and display it in the list (may take a minute or two)."
     • Windows will automatically install the drivers and display a dialog box "Install drivers" in the taskbar.
  1. Finally, you will get the "You have managed to add HP Officejet H470 BT" (or similar).
  2. Click on ' Next... and when you are prompted to 'Share' Select NO if no, of course, and then click 'Next' again.
  3. A second dialog box "You managed to add HP Officejet H470 BT" must be posted... as well as the ability to "Print a test page": try it.
  4. Click Finish.

  This should be it!

  Yet once again, it worked for my H470... and perhaps differ slightly from yours... Also note that, since we are installing directly through Windows7, it uses the latest drivers available from Windows Update.

  I hope this helps!

  On paper.

• Using HttpUrlConnection Sockets?

  In its implementation, java.net.HttpUrlConnection uses java.net.Socket or java.net.ServerSocket?
  
  Thank you very much!

  java.net.HttpUrlConnection uses java.net.Socket

  Yes.

  or java.net.ServerSocket?

  N °