Board of Directors

Similar Questions

• Model number of Board of Directors system satellite 1800 412

  What is the model number of Board of Directors of satellite 1800 412 system?

  Hello

  I found this page.
  http://www.sparepartswarehouse.com/DeviceType-vendor-modelline-modelseries-partList.aspx?DeviceType=0&vendorlevel=ModelSeries & modelseriescatid = 51077 & partcatid = 140747 & filter = 2

  You will find different tips for Satellite 1800. It is not a Satellite 1800 412, but I think it should also work.
  But the best way is to contact the Toshiba authorized service partner in your country. You can order the compatible card of these guys here, and you can be sure it's a good advice.

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• Error 00ce after replacement of the Board of Directors

  Hi all

  We recently have a defective Board on a m93z, I had a technician who came to change the Board of Directors. After the passage of the motherboard, I got an alert from the bios telling me that the serial number and model are not valid in the bios. I ran an update of the bios of the exe on this site, but it did not work (os version).

  The tech told me that it was easy to change but at the moment, I have no idea what to do.

  should I use winphlash and how?

  Download the iso CD to update the BIOs of your machine. Burn this disc and boot the computer from it. During the update of the BIOs, gives you the opportunity to update the machine/model Type and serial number.

• When I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation

  I installed several card games again and had no problems.  But when I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation. I have

  Windows Explorer and uninstalled until I reinstalled it.  I've done 4 times.  He went all way through the process, than to see a message that Setup could not be resumed.  Given that the other two disks of Hoyle have been correctly installed, why do I have problems with the drive of Hoyle puzzle and board? I contacted Hoyle and does everything that they told me to do.  But without success.  What could I do it wrong?

  Hello

  (1) what is the operating system that you use on the computer?
  (2) you get error codes?
  If you use Windows 7, Hoyle Board Games is not compatible with Windows 7.
  You try to install the game in compatibility mode.
  Click on the below link to check the compatibility of the game.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Hoyle%20Board%20Games&v=Encore&UID=&pf=0&PI=9&s=Hoyle%20card%20game&OS=64-bit
   
  You can check the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  You can check with the manufacturer of game for patches to run the game on Windows 7.
  http://support.Encore.com/
  I hope this helps!

• Error message: this isn't a problem with intellectual property. Board of Directors, but rather with your SQL Server when you visit a Web site.

  Original title: an error occurred in SQL server?

  Hello, I just wanted to go to this site, but this error pops up: error SQL

  An error occurred in SQL server:

  This isn't a problem with intellectual property. Board of Directors, but rather with your SQL Server. Please contact your host and copy the above message.

  «Back to index »

  Please help me, I just moved my computer so I had to disconnect from the internet, but now he has problems.

  Is the site I tried to go to: http://www.minecraftforum.net/topic/227822-166-millenaire-npc-village-076c-duplicate-villager-fix/

  Hey Brainiac,

  1. are you encounter problems with this site?

  2. are you able to connect to this site from a different computer?

  3. were you able to connect to this website before?

  4. you remember to make changes to the computer before this problem?

  The problem seems to be, with the site that you are visiting. You can check if you can access the site from another computer.

  Hope this information is useful.

• X61T works wireless after the replacement of the Board of Directors?

  Hello!

  I have a lenovo X61T, who recently had a Board of Directors system of, after a repair by a local warranty service workshop (CompuCom), we found that the wireless (and fingerprints, scanner...) were not working.

  It seems that LED to my bluetooth on the monitor lights up and works fine, I can be able to snap the cycle as the combo FN + F5, but whenever I try to turn on the Wifi, it does not. I keep on pressing power, and he never replies.

  I can't check the fingerprint sensor is working, but I was able to light up, to scan and connect to wifi networks of this card without any problems from my Ubuntu installation on a separate volume that had no problems with the new motherboard.

  If the wireless card works in linux, so this leads me to think it's vista (32-bit business) that has the problem

  Here's what I did:

  1. Uninstalled and reinstaled drivers (did not remove the driver software, I should try that?)
  2. A ran an update of the system (found that the new bios necessary Council an update, but otherwise I'm keeping my system up to date, check every month at least for new updates)
  3. Turn off the TPM (Client Security Solution) completely (then maybe I need to reset that?)

  I don't know what could be causing the problem, I have tried to set up a connection profile and specify the wireless network and other, but I get an error saying that the wireless radio is turned and press repair to fix the problem, it does not work

  I did save the results and have save them as an HTML file (to see what happens when he tries to shut up... here are some of the messages in the newspaper that I found interesting: (the paper is long enough, so I could send it to someone if they requested))

  ERROR AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:405 CIpNotify::GetIpAddress: network cable not connected to adapter PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:420 GetProfileStatus: addressn Ip obtained for PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:452 GetProfileStatus: call AcTcpIpServices::IsValidIP for PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) 14:24:20:483 [9/12] AcProfileStatus::AcSvcIsValidIP (CAcLanSettings LanSettings)) EntryERROR AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:514 AcProfileStatus::AcSvcIsValidIP no valid IP [0.0.0.0]        

  ERROR SvcGuiHlpr (Mike (Prvlg).2304.5200) 14:24:20:826 [9/12] AcDiagnostics::AcDiagnostics: call AcSvcGetWLConnectionStatus() for pnpid = (PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014)

  ERROR SvcGuiHlpr (Mike (Prvlg).2304.5200) 14:24:20:857 [9/12] error Impossible de AcDiagnostics::AcDiagnostics to the adapter object get

  Then I thought about it... Fix anway, would try to Exchange wifi cards and out the keyboard and the palmrest. Found that there are locations for 2 cards, put the card wifi of origin in another location, and before power to set up, wifi worked as if it never failed!

  So I swapped back to the original square and voila, the problem is back. Vista seems to not be happy, but fortunately, I know that the slot works very well since it was detected by linux.

  So ultimately has this amazing piece of hardware continues to grow on me. This is my first laptop class IBM Business and I must say that I am very happy!

• Qosmio G50 from power (PQG55A-024020) - on board the Board of Directors

  Computer age subject to 18 months starts giving various indications of power supply 3 Aug. DC In light flashing, battery load sometimes and sometimes not, would be put off, computer doesn't end not a boot on the power supply with battery removed.

  Computer limped along for 8 days then failures stabilized. DC in stationary light on plug, battery indicator is "0% load, no charging current". Battery should have about 70% fresh and computer boots properly on the battery. I guess that the on-board power unit is u/s.

  Any comments or advice appreciated. I am currently in journey to the center of the Australia.

  Thank you, David.

  Hello

  If you have an adapter that you can test or a friend, maybe you should do this, otherwise I think that it s mainboard malfunction or something else controls the process of loading. In this case you need professional help form an ASP to get rid of it.

• New Board of Directors St

  I lost my board St. and to buy a new one... pl help

  Kind regards

  Manish Kumar

  [personal information edited by Moderator]

  M07 says:
  

  I lost my board St. and to buy a new one... pl help

  Kind regards

  Manish Kumar

  Hello

  There are millions and millions and millions of them, which one you want to buy?

  Kind regards.

• New options of Board of Directors system for w530

  Hi all - I've got w530 2436-CTO that probably needs a new main Board. He post, and when the memory is removed it gives a beep code manual says is the module DIMM or system board. I believe that my card system FRU is 04 x 1505, but I can't find anywhere to buy this part. How can I understand that other replaceable units on site are compatible? For example, I see lots of places selling 04 x 1547.

  A Lenovo doc describes 04 x 1505 as PLN Q1 AMTC-y y - TPM and the 04 x 1547 as PL Q3 W8 nAMTyTPM.

  Any thoughts? Thank you guys.

  
  

• Outbreak of several boards of Directors

  Hello

  I have a PXI-1033 chassis with a digital map of the PXI-6534 and an analog card of the PXI-6733 and am using DAQmx and LabVIEW 2010 (I'm fairly new to both). I try to sync the series of ~ 1 min output digital and analog with a temporal resolution of 1us topic. To store the value of each channel to each 1us need more memory cards would, so I've set up a trigger to tell them when a channel needs to change.

  Currently, the way I put it in place is the following: the berries of the analog and digital output are loaded on the cards, and they are configured for output with examples of clock accepting an input external trigger (PFI2 and PFI5, respectively). One of the digital output lines on the 6733 is configured for an output pulse whenever a channel needs to change. This line is connected to PFI2 on the 6534 and PFI5 on the 6733.

  It works as expected, but I have a few questions:

  (1) for the time being, I'm using an external function generator clocked at 1 MHz as the clock to the digital output on the 6733 (who acts as a trigger). I had rather not need an external device to do: is there an internal clock on maps or in the PXI chassis that I can use instead? I tried to select "OnboardClock" as the source for the sample clock VI, but it gave an error: "terminal Source routing is not found on the device."

  (2) is there a way to route signals from triggering internally, rather than having the BNC cables between boards? (This is less important; it is more a cosmetic problem).

  Any help is appreciated :-)

  Rob

  
  

• Swap of the Board of Directors system on pavilion dv6-2057 cl

  Hi, just replaced the motherboard on my Pavilion dv6-2057 CL. laptop works now but started it stops at a black screen, indicating that the product information are not valid. The following information on the system board are invalid or missing. card system OOA, produce product - Configuration name - serial number - product number. Can someone tell me how to correct this info.

  dsi183 wrote:

  The info. in the link worked! Step by step instructions were right on and easy to follow. Laptop has a new mainboard and perfect work.

  Play well! Where did you find the PCID on the laptop? A user on this forum has a new ATV, the same problem but couldn't find the CCDI.

• Select the symbol on the artboard and copy the name of symbol on behalf of the Board of Directors art

  I'm generating icons in AI CS6

  I have files WITH 100 work plans

  Some Arts Councils are still empty, just underway.

  On the artboard, I gross and paths on a separate layer called symbols with a symbol only.

  The symbol layer could be the layer is visible.

  100 symbols in the document.

  Now, I want to copy these names for the names of art Council for export and a text box on the art map for an overview of printing.

  I found a script to rename a layer in its content - but it does not recognize the symbols

  I found a script to rename a work plan in a layer

  I found a script to place a text box with the name of Council of art on the art map.

  I can't combine them, please help!

  I can make applescript and Filemaker scripts, but I'm new to Javascript.

  Rename the layer to the content - does not recognize symbols!

  function LayerNameMatch() {}

  If (app.documents.length == 0) {}

  Alert ("No. Open/Active Document Found");

  } else {}

  var doc, i, l, ab, salt, n;

  doc = app.activeDocument;

  for (i = 0, l = doc.artboards.length; i < l; i ++) {}

  AB = doc.artboards [i];

  doc.artboards.setActiveArtboardIndex (i);

  doc.selectObjectsOnActiveArtboard ();

  Salt = doc.selection [0];

  sel.parent.Name = sel.name;

  doc. Selection = false;

  }

  }

  }

  LayerNameMatch();

  Work plan and rename the layer name:

  If (app.documents.length == 0) {}

  Alert ("No. Open/Active Document Found");

  } else {}

  var doc = app.activeDocument;

  If (doc.artboards.length == doc.layers.length & & doc.layers.length == doc.artboards.length) {}

  for (var i = 0, l = doc.artboards.length; i < l; i ++) {}

  var ab = doc.artboards [i];

  AB. Name = doc.layers [i] .name;

  }

  Alert ("completed: \nRenaming work plans to match the names of layers is finished");

  } else {}

  Alert ("OPPS: it won't work!") \n the number of layers and work plans do not match");

  }

  }

  Make a Textbox containing the name of art Council

  This script takes the names of artboard to a document and print them in each work plan.

  Tell the script to operate only on the document open and targeted

  myDocument var = app.activeDocument;

  IDoc var = app.activeDocument;

  ilayer var = idoc.layers.add ();

  ILayer.Name = "0 SeitenName";

  STEP 1: create labels for each work plan

  Grab a hold of work plans

  for (var i = 0; i < app.activeDocument.artboards.length; i ++)

  {

  Board graph var = app.activeDocument.artboards [i];

  For each work plan, add a new text block

  myLabel var = myDocument.textFrames.add ();

   

  fill it with the name of the artboard

  myLabel.contents = artboard.name;

  This line controls the font size

  myLabel.textRange.characterAttributes.size = 12;

  This line positions the text against each work plan

  myLabel.position = [artboard.artboardRect [0], artboard.artboardRect [1]];

  }

  You can use this:

  #target illustrator
  function test(){
      var doc = app.activeDocument;
      doc.selection = null;
      for(var i=0; i		   

• Noise on our Board of Directors/pyrometers SC-2345

  I'll try to describe the situations the best that I possibly can.

  We have implemented a package of signals Council (SC-2345) be our controller to a durability test bench. We have also implemented an another SC-2345 to only to acquire the data of 8 pyrometers read the temperature during the tests.

  The problem is with noise on playback of temp. Most of them work properly and we can live with about 5-7 degrees F noise because it is not essential to the accurate precision. We have a few that are about 30 to 50 degrees F noise when nothing works. Then if we turn on our collector hydraulic control, the noise will disappear, but it will be set in another seemingly random way 2-3 pyros. There is no consistency at all with which we're going to make noise.

  We spent countless hours investigation and we found that the shields on the cables have a potential in them. We can not understand, but we have them crashes on one end and that seems to have solved this problem of potential, but not the noise. We also have a potential on our box OR even subject .3V with no reason for to be. We thought that maybe it was a bad ground at the exit of the building, but we tested those and they were put ashore as well as all conduit wire crosses. We put everything on a UPS, and it did nothing.

  Pyros are on nylon materials so they are not picking up interferences of the machine like this. The wires are all performed directly in the modules in the box, so no connection BNC exposed or something like that.

  With all of the tested, than we have done, it seems that the problem lies in the box OR somewhere, but we do not know where.

  Would it be just low power and it's hard to run?
  Any advice on how to locate the problem or how to fix this noise would be great. Also, please ask questions if I can answer so others can read them to be clarified more.

  Thank you

  Patrick

  After countless hours trying to solve this problem, we re-wired and put in the new pyrometers and it worked perfectly. We can entirely blame the bad pyrometers of the original company, we bought.

• Can PCI 6602:How I use digital lines of the Board of Directors and at the same time to generate trains of pulses by using a meter?

  Hello!

  My problem appeared when I tried to update my traditional NOR-DAQ legacy code to DAQmx.

  I use 2 meter (meter 5 and 7 meter) on PCI-6602, to generate trains of pulses, as well as the lines of e/s digital port 0 (the form lines from 0 to 7). What I do in my request, it's that I'm starting to generate the pulse train on the output of 2 meters and after that I play with the State of digital lines.

  Traditional, it was no problem to use the meters and digital lines at the same time, everything went perfectly, but in DAQmx, is not possible.

  What's happening: I start generating train of pulses on the output of counters, no errors, but when I try to change the State of a line of digital port the generation of the pulse train is stopped. What happens when I start the task associated with the digital way.

  My question is: is it possible to create a channel on digital lines without changing the channels created for meters?

  Another thing that I managed to do with the panels 'Measurement and Automation Explorer' and Test for PCI-6602, is basically the same thing, I generate trains of pulses on the output of the 7 meter and try to start a job on the digital line, but I get an error:

  "Error-200022 occurred in test Panel.
  Possible reasons:
  Measurements: Resource requested by this task has already been reserved by another task.
  Device: Dev4
  "Terminal: PFI8.

  On the contrary if I use the counter 0 or a counter 1 to generate trains of pulses I encounter the same problem.

  What resources are used by 2 to 7 of the PCI-6602 card counters and the counters to 0 and 1 do not use?

  Thanks in advance for any answer!

  Ciprian

  After doing some real tests on this device, I found that it is a normal behavior for the jury of 6602.  This is because when you start a task digital all 32 lines are configured for digital i/o, so it replaces your meter operation.  The article below the link explains a little more on this subject.  You must start the digital task before the task of counter to use the features of both in your program.

  2 meter and above will not work correctly when you perform digital i/o on NI 6601 or 6602

  http://digital.NI.com/public.nsf/allkb/43F71527765EEC3886256E93006CD00C?OpenDocument

• OR MAX see GPIB controller/board of Directors, but crashes on test/Scan troubleshooting

  Hello

  I have a new PC (Win7 64 bit) with a new GPIB PCI - E card and NI-VISA 14.0 (later). I can't get the map to 'do' something - he's not troubleshooting auto test, or search for instruments, and the ibfind in an interactive control command does nothing (they are all "don't hang up" no error reported). What is happening with two identical machines, each with the PCI-E card. My 6 monts test machine there is works very well, but it is 32 bit and has a different chipset/firmware of the provider (which was not planned, we ordered the same model, but the seller seems to think that it's little, they kept the model the same number).

  Any ideas on what to do? I demoted NI-VISA a couple of times already, and Windows reports gladly driver card / work properly. GPIB options all seem normal in case of default (GPIB0, controller of system activated, etc.).

  Thank you very much for your suggestions!

  -Rick

  Hi rnelsonee,

  Make sure you also have the NOR-488 driver. 2-day so you can communicate with GPIB devices correctly. You can follow this link to download.

  http://www.NI.com/download/NI-488.2-14.0/4802/en/

  If you still have questions, could you let me know what kind of errors you get when you fail the self-test NI Max? All codes error or screenshots you can provide will be useful. Thank you.

  Paul C