Boot minimum vs Mode to set the CPU to 80-100% safe

Similar Questions

• The CPU usage reaches 100% and the system locks requiring a hard restart on Windows Vista

  All of sudden the CPU usage reaches 100%, which makes the system dead slow and finally the system stops responding. I have to do a hard reboot to continue using the system.

  I tried to open the Task Manager to see if there are programs or services running that can consume resources and found nothing. The remains of number of CPU use, the graph to use but less than 10 years is hovering at 100%.

  I did not change my system.

  The problem appears on the two accounts that I installed on my operating system.

  I removed all the unwanted programs since the system was started.

  I have McAfee Antivirus installed for more than a year now, and the latest antivirus patches have been installed.

  Help, please.

  Thank you in advance!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Firefox does not start (not safe mode), but uses the CPU

  I have the latest Firefox 25.0 (and the last Flash 11.9.900.117) on Windows 7 and the following behavior is reproducible. It started not too long ago.

  At first when I launch Firefox, nothing appears no matter how often, I restart. I see in the list of the process firefox.exe to 25% of the CPU, 2 x FlashPlayerPlugin_11_9_900_117.exe (CPU 0%) and plugincontainer.exe. No matter how many times I killed all of them, would not restart Firefox.

  The following also not help in this situation:

  • Starting in normal safe mode: Firefox opens a window but immediately freezes and does not respond. The process list shows the same process even if I find the unexpected FlashPlayer.
  • Disable plugincontainer: same results (just without plugincontainer.exe)
  • Uninstall Flash: Same results (just without FlashPlayerPlugin)

  The following can start Firefox only once:

  • Starting in SafeMode but select "Reset Firefox": Firefox does not start right away, however. Nothing happens, and you have to kill the process. However the very next time you launch Firefox in the normal way, it works fine (but it shows FlashPlayerPlugin.exe in the list of unopened Windows process despite the tab). Unfortunately, after closing Firefox the process (Firefox, FlashPlayerPlugin) are not deleted. I kill and the problem with Firefox do not leave reappears.

  In case you use "clear history of Firefox closing:

  • do not delete Cookies

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Use "Firefox > output" (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit) to close Firefox if you are currently doing by clicking on the X close in the title bar of Firefox.

  Create a new profile manually (and not via the reset) as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Script to set the CPU and memory for VMS

  Hi all

  We have an environment with 100's of virtual machines. We have classified these VMs, and each category will have specific vMem and vCPU. Excel / csv spreadsheet has the list of virtual machines, as well as the values of vCPU and vMem. I'm looking for a script that can set the values of vCPU and vMem for virtual machines according to the directives of the excel sheet. If anyone can help with this?

  Thank you very much

  Try this.  I took the function of hotadd from here:

  http://ICT-freak.nl/2009/10/05/PowerCLI-EnableDisable-the-VM-hot-add-features/

  I tested against 1 VM and it works well.  It will make a loop and power all VM power off in parallel, then it will change all.  Then turn on all at the same time.  If you do not parallel you can change it.

  I would like to test in your lab or against 1-2 not prod the first VM.

  Same CSV colum

  VMNAME, MEM, CPU

  Function Enable-MemHotAdd($vm){    $vmview = Get-vm $vm | Get-View     $vmConfigSpec = New-Object VMware.Vim.VirtualMachineConfigSpec
  
      $extra = New-Object VMware.Vim.optionvalue    $extra.Key="mem.hotadd"    $extra.Value="true"    $vmConfigSpec.extraconfig += $extra
  
      $vmview.ReconfigVM($vmConfigSpec)}
  
  Function Enable-vCpuHotAdd($vm){    $vmview = Get-vm $vm | Get-View     $vmConfigSpec = New-Object VMware.Vim.VirtualMachineConfigSpec
  
      $extra = New-Object VMware.Vim.optionvalue    $extra.Key="vcpu.hotadd"    $extra.Value="true"    $vmConfigSpec.extraconfig += $extra
  
      $vmview.ReconfigVM($vmConfigSpec)}
  
  $vmlist = Import-CSV C:\csvfile.csv
  
  foreach ($item in $vmlist) {    $vmname = $item.vmname    Stop-VM -VM $vmname -RunAsync     }foreach ($item in $vmlist) {
  
      $vmname = $item.vmname    $cpu = $item.cpu    $mem = [int]$item.mem * 1024    Enable-MemHotAdd $vmname    Enable-vCpuHotAdd $vmname    Set-VM -VM $vmname -NumCpu $cpu -MemoryMB $mem -RunAsync -Confirm:$false
  
  }
  
  foreach ($item in $vmlist) {    $vmname = $item.vmname    Start-VM -VM $vmname -RunAsync     }
  

• After ebms_stats. GATHER_FIXED_OBJECTS_STATS, the CPU usage is 100%

  Hello
  
  After that I ran exec dbms_stats. GATHER_FIXED_OBJECTS_STATS on my database, the CPU usage is almost 100%
  Can you please tell me how to revoke this change?
  
  Version of DB-> 11.2.0.3
  -> Linux OEL5 64 bit OS
  
  Thank you!

  There could be a statistics screen of restoration with a box fixed objects somewhere in your statistical optimizer dbconsole administration screen. (I'm on a different version, so I can't say for sure).

• Tile performance - I want to set the maximum value to 100%

  Hello

  I'm running a question on the slab of the Performance.   I'm hungry when I'm adding percentages and rolling up to a tile of unique performance.  If the point x: 11%, Y: point 19%, point 24% Z:... etc.  However, when I add all the elements together, sometimes I'll get 101% which, in our profession, the rule, not possible.    Is there a way to force the maximum allowed be 100%?  I would like a method to implement logic that says: when summarizes all the elements, if the value is greater than 100, make the value of 100.

  I know that this sometimes rounding errors on individual items, but it is acceptable.  I'm looking for a way change the tile of the performance instead.

  Thank you

  Figured it out.  For future reference, I added a case statement for the sum... If the sum ([the index]) > 100 then 100.  Otherwise, use the sum ([the index]) essentially, go to edit the formula in the criteria and change now.

• U310 Impossible of Boot or BIOS enter or set the boot device

  Hello

  I've got U310 with bad hard drive. SYTUATION:

  Laptop on the old hard drive failed to load Windows 8.1 or recovery. When I try to go to recovery error apears. Windows cannot start propetly. I change the HARD disk again an SSD, but after that turn it on nothing happens, black screen. When push button recovery menu shows, but none of the 4 options does not work. Problem with the bios, I read something can not start after trying to recovery.

  Now I don't know how to install the new system on the laptop. I ' t is possible to upgrade the BIOS without a system?

  I had USB HDD with Installation of Windows 8 in UEFI (GPT) mode. Affter correctly install the system, upgrade the BIOS now computer laptop works very well.

• Igfxupdate.exe forces the cpu to load 100%

  Recently, my cpu load @ full, when open the Task Manager it remains cool. I couldn't find IGFXupdate.exe job manager. When deleting the file in the windows folder, it activates by itself once the Task Manager is closed. Please someone find a solution to my problem... Even google is looking for the answer...

  Thank you

  Hi, after several hours of attempts, I think I finally found the culprit:
  most likely a Trojan Generic 792778 of KDV, it claims to be the windows service "Search Indexer" and it creates the executable file false: 'igfxupdate.exe' who tries to connect to the internet and increases cpu load all the time until you open the Task Manager to hide...
  So I solved the problem like this:
  in the windows services management console, I disabled the above fake windows service (he was in automatic start mode) and after I deleted the igfxupdate.exe file in the windows system32 folder...
  I restarted the pc and I deleted the same service with the command: "sc delete SearchIndexer '...
  problem solved! CPU back to the normal level, no more connections and no more files igfxupdate autour...
  in any case, for more security, it is best to also do a full scan with a good antivirus/malware software

• Setting the camera to RX - 100 for to make the new copies of the zoomed image

  
  

  Thank you for your quick response.

  Dennis

• my pc CPU running at 100% for all the programs I opened / what is the problem and how to solve?

  my pc CPU fan runs very strongly & the processor running at 100% for all the programs I opened. DO NOT KNOW IF IT IS A VIRUS IN THE PC WAS WORKING FINE A FEW DAYS AGO. How can I solve this issue?

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  I would also refer the below article which may be useful.

  The CPU utilization reaches 100 percent when you run programs after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/890582

• Stop the fan from the CPU in a few seconds (T440)

  CPU fan stop my T440 after a few seconds,

  When I turned computer on I heard his fan and air jet, but after a few seconds the fan seem to be collapsed, is this normal?

  Hello

  In cooling mode active, while the CPU temperature is low (usually about 55 degrees), the fan is beeng rotation at low speed, about 2000 RPM. Good quality fan is very silent on this mode.

  In any case, you could check if the fan is spinning by the hardware test tool, HWiNFO is an example.

  Of course, once the laptop is on, the fan starts to work at the POST stage too.

• What is the program "explore.exe"... All of a sudden, he took over my computer and it is with the HELP of 95-100% of the CPU?

  I got these numbers by displaying the Windows Task Manager...

  Hello

  1. All changes made to the computer before the show?
  2. When exactly this question produce?
  Essentially, Windows Explorer is used to browse the files and folders in Microsoft Windows. When running the explorer.exe file, a window of the application is started and allows the user to navigate the content of files and display the file information.
  Do the methods provided and check if it helps to solve the problem.
  Method 1:
  Check out the link and follow the steps.
  Explorer.exe process uses many CPU Cycles when Windows is idle
  http://support.Microsoft.com/kb/317751
   
  Method 2:
  Check out the link and follow the steps.
   
  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=1vrPRuhAhAg
   
  For reference, you can visit the following links:
   
  The CPU utilization reaches 100 percent when you run programs after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/890582
   
  The CPU usage may reach 100 percent when you resume a computer that is running Windows XP standby mode several times
  http://support.Microsoft.com/kb/903737
   
  the 100% CPU usage may occur under some battery conditions
  http://support.Microsoft.com/kb/328915

• The CPU usage goes to 100%

  I have a laptop Dell Studio 2010, the processor Intel, 4 GB of ram, hard disk 320 GM (180 GB consumed) running Windows 7 and IE 11 giving me CPU usage problems.  I don't know what everything is related, so here's the story.

  I lived my download speed slow - dropped by half every 2 hours or more after a reboot.  Occasional problems with the speed of the computer as well, and when I checked the resource monitor I see the CPU usage hit 100%.  A reboot has always solved the problem.  Running in Mode safe mode eliminates the loss of download speed so I knew it wasn't a problem with the hardware or my cable modem or a wireless router.  I have explored many possible problems, but none solves the problem, then I reinstalled Win 7 Friday, January 16.  Download speed, not only fixed but faster than before.  It remains stable and do not disintegrate so there was something wrong with the OS, etc.

  However, the problem of the use of the CPU remains.  What seems to happen is that something triggers a high demand and then all processes on the computer joins.   When I look at the resource now monitor consumes 1.3% of CPU, but when things are choking it consumes 15% of CPU and go all processes running as 0.5% to 5%.  So you can't point to a single process as the culprit it is possible that web sites of strong demand (lots of ads) trigger the problem.  I'll do some research on that.

  I did a lot of web research as well as this forum, and no patches seem to work or apply to me.  I ran a Malwarebytes scan and a full virus scan with Microsoft Security Essentials: nothing found.

  The computer is almost 4 years, but I wouldn't spend the $$ to replace and find that the problem is software.  Any ideas?

  The problem solved when I've upgraded to Win10 on this machine.  At the same time degradation download speed (with time) newsletter is resolved.  I can't imagine how everything worked but I discussed the idea with several IT people I know and have gotten various suggestions.

  Since a clean installation of the operating system has not fixed it, I do not understand why install Win10 fixed, but that's it.

  Since then, I've replaced this computer.

• Defining the limit of the CPU with c#

  I can't set the CPU limit. Whenever I run the following code what happends is the VM shares get set to low temperature.

  spec.cpuAllocation = new VimApi.ResourceAllocationInfo ();

  spec.cpuAllocation.shares = new VimApi.SharesInfo ();

  spec.cpuAllocation.shares.level.Equals ("custom");

  spec.cpuAllocation.limit.Equals ((long) 1200);

  clientInfo.Connection.Service.ReconfigVM_TaskAsync (vmmor, spec);

  How you set the CPU limit using c#?

  Thanks Jim.

  The snippet above in c# will ask you to set a property more in the specifications, in order to define the limit correctly.

  > spec.cpuAllocation.limitSpecified = true;

  In c#, there are certain properties that require '< propertyName > specified' to 'true '.

  Hope that solves your problem.

• Deadline the CPU.

  Hi guys have an ESXi newbie question.

  I put ESXi on a test machine.  Pentium 4 2.8 GHZ.

  When I check the allocation of resources. The deadline for reservation of CPU is 1539 MHZ.

  How do you calculate this limit?  Is this something that can be changed?

  2. in general do I have to set the CPU limits or can I just put it in unlimited?

  By default, the limit of the reserve is equal to the difference between the cycles available total CPU physical in the Active Server less than CPU cycles used by the vmkernel, virtual running machines and what is reserved by the pools VMa and resources - so in your example, there is 1539 MHz available that can be reserved.

  With regard to the limits - I wouldn't recommend playing them - the VMkernel does a great job of scheduling so when your virtual machine needs, it is available and when it is not required, it is returned in the pool-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful