Defining the limit of the CPU with c#

Similar Questions

• Increase the use of the CPU with nvme or searched ssd ssd...

  My 'record' CPU usage is about 50% on a dual xeon (system more old bridge of sand...) 2 x 8 core 32 thread) when using a consumer 850 samsung ssd as a source and the export of other ssd cache on the hard drive or ssd right also. Yes separate OS and Adobe on SSD. And the cache on another hdd put ssd caching.

  I was wondering if anyone has noticed benefits with source really slamming first CC fast disk... e. g several s searched sata in raid 0 ssd or NVME ssd or ssd pci-e.

  Know and not first love high ghz cores, just trying to find the bottleneck. Made 3d etc and so need a lot of hearts here (soon improve to 16-22 core xeon v4).

  Am also aware that codec has a lot to do with it... h. 264 and cineform (doesn't work does not at the moment) is appalling on the first, while DNxHD seems ok. For some time I've tested DnxHR.

  As a reference, FFMPG with MyFFMPG front end has no problem to use 100% of all cores/threads during the encoding. But of course does not help when editing!

  Will do... but using MyFFMPEG here (front-end GUI for FFMPEG) for some old clips of gopro in protune, h.264 mov DNxHD files hd2 (no DNxHR yet! bummer!), but quite impressive to see all 32 threads pegged at 100%! Yes baby, that's what I'm talking about!

  going to try this once again, important macroblocking, DNxHD standard MyFFMPEG parameters not maxi not rated (hard to say I look on screen uhd)... but then again 8 clips took all of about 5 minutes...!

  Edit even tried with different settings, prores standard on ffmepg profile, once again use at 100%, 8 clips made in about 5 minutes of time... of course could not use pc at all, mouse was the analysis! But good to see the hearts of work!

  Maybe Adobe reeally reaally wants us to be multi-tasking rather than take coffee/beer breaks? Will come back to this topic once I visited configuration (22 carrots x 2!... you know for real work)... and I guess that will have to buy some sort of quad-core i7 for adobe... a piddler machine located in the corner and first... hahaha... what a joke...

• Average usage of the CPU with get-stat

  With get-stat, I can get average use of the processor in MHz using the metric usagemhz.

  However, by default the maximum and minimum values in MHz is not in data points from 2 months ago.  That's fine if I want to just average, but I also need average peak values.  The average maximum CPU usage is possible with powerCLI?

  The thing is that when you have found these averages and you do that a day or a week of a data value is not enough to really give you a true picture - you need 2 - 3 months.  Can Haw I achieve this with PowerCLI?

  1. you can easily adapt the cmdlet Get - VM to produce the result for 1 or a limited set of the virtual machine

  For example:

  Get-VM-name MyVM | Select...

  Returns the result for 1 computer virtual called MyVM

  If you do

  Get-VM-name my * | Select...

  It returns results for all virtual machines whose name begins with "My".

  2. that's because Select-Object generates a hash table, and by default PowerShell displays like that hash tables.

  To get only the value real exchange the last select like this

  ...

  } | Select AvgCPUMhz - ExpandProperty

  ...

• [MAF - AMPA] Strange behavior of the MAF with REST service

  Hi MAF Experts.

  I just noticed that there is a strange behavior in my application of the MAF. The first loading of the page, amx:page does not make its contents (of REST). However if I kill the app and relaunch the app, content appears.

  Pattern:

  1. Start of the CRG App
  2. Opening of session
  3. Dashboard (the content is rendered)
  4. Go to any other aspect (lets say a list of products)
  5. Open product list (content do not get returned)
  6. Kill the MAF application
  7. Start of the CRG App
  8. Dashboard (the content is rendered)
  9. Go to the product list
  10. List of products (content gets rendered)

  I put a few breakpoints on EntityCRUDService and RestPersistenceManager.

  So far it return the list of entities and display the correct data (from watches in debug mode)

  Last thing I noticed is the red color below. She defined the EntityList with the new value of REST (This displays a correct value).

  TaskExecutor.getInstance (.execute (isDoRemoteReadInBackground ())

  , () -> {

  Auto Sync all actions pending first, pass false for inBackground because

  We want to process actions pending before the reading distance

  getDataSynchManager (.synchronize (false));

  The list of entities < E > = executeRemoteFindAll();

  If (entities! = null)

  {

  When an error occurs (for example server is not available, the method returns the value zero)

  setEntityList (entities);

  }

  });

  Any suggestion?

  All the rest service are configured with AutoQuery = true in the persistence - mapping.xml

  See you soon,.

  Hendry

  Hendry,

  Thanks your testcase, I was able to understand the problem.

  It turns out that MAF 2.1 has problems dealing with the advanced way in which AMPA running background tasks with the help of a thread in all of features.

  We have slightly modified the implementation in AMPA to use one thread per function and now the update issue is resolved. I sent you a link to new construction.

  We will publish the new generation soon on GitHub so that others can benefit in the same solution.

  Steven Davelaar,

  Oracle Mobile A-team.

• define the area reached for Movieclip button

  Hello

  button normal is too bad to use masks, movieclips or button etc, we can define the area with the image clicked

  But how do I set the area reached for Movieclip button

  I download the example fla file, I use a simple mask anime and when I roll over the button and go at the top of the button to exit slowly you can see the active, change button repeatly

  Here is the link:

  http://www.mediafire.com/download/5ca3na12r8g1dd8/movieclip_Button.fla

  I don't download and fix the files unless I'm hired.

  but here's a sample fla that allows you to find your own error, http://www.kglad.com/Files/forums/test2.fla

• Branch to the Page identified by the element with parameters

  A certain page we originally had a 'branch at or the Page URL' that has parameters associated with it (which one who reset the element on the page the branch goes back to the current value of the item page before branching him given that this necessary element to stay with the current value of population but was erased when he branched out) but now I have a new Application process that defines an element of the request for the page that should be branched to.
  
  Since Apex does not recognize the elements of the Application in a "branch of Page or URL", I need to create a "branch of Page identified by Item", the problem is that there is no "Set these elements" "with these values" with this type of branch or the option to include parameters in a URL target. I already tried to use the "branch Page or the URL" with the Application in the URL element, but that no longer works.
  
  Any suggestions on how I might branch to a page based on an element of the Application (if not this way, somehow creates a branch to a page based on a value in an application process) with the settings?
  
  What does not make sense to me, is that you could create a branch to a Page with a value of Page element with parameters defining the elements with certain values, but you can do this when identified by the item or it is not yet Application_Items in a Branch_to_Page/URL.
  
  Thank you in advance,
  -Brian

  Brian,

  Have you tried to use the Type of the branch "Branch to the Page identified by the (name of the use element) element" and put the name of your APP_ITEM like

  APP_ITEM

  ?

  This should work for you.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• The "helpsvc.exe" process is using 81% of CPU. I want to know the means for each withdrawal helpctr helphost... etc or deactivata, or the use of the limit of the CPU!

  Helpsvc.exe has ben using 81% and over CPU causing other processes to go slow or stop!  Norton identified helpsvc.exe as the CPU "pig" but I have no way to remove or limit its use. Add/Remove Programs, or a deletion of file has been accepted.  How can this problem be controlled, any suggestions?

  Helpsvc.exe has ben using 81% and over CPU causing other processes to go slow or stop!  Norton identified helpsvc.exe as the CPU "pig" but I have no way to remove or limit its use. Add/Remove Programs, or a deletion of file has been accepted.  How can this problem be controlled, any suggestions? Please respond to takis224 at yahoo, thank you

  Normally, helpsvc.exe shouldn't use all CPU resources, if you use actually help and support and not much even in this case.  It is possible, however, that you have a malware application using the same name.

  The correct helpsvc.exe must be placed in C:\Windows\PCHealth\HelpCtr\Binaries.  The current version should be 5.1.2600.5997 and 727 KB in size.  If your helpsvc.exe is located in another directory or a different size, it is probably malware.  What is the real message of your Norton product?

  There was a problem with helpsvc.exe exhausting the resources of the computer, but that the problem was supposed to have been corrected in Service Pack 2 (and you have sp3, correct?). http://support.Microsoft.com/kb/839017

  If all else fails, you can disable using Windows:

  1. Start > run > services.msc > OK
  2. Scroll down to "Help and Support" and right-click on it and select Properties.
  3. Stop the service.
  4. Set the startup type to "Manual" (service starts when you click Help and Support) or 'off '.
  5. OK your way out.

• Configuration of database running on the server with 256 cpu

  Hi all
  
  We have a rac 11.2.0.2 on Solaris 10 installation.
  The servers are 2 and a short configuration is:
  
  SQL > show parameter cpu_count
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  cpu_count integer 256
  
  psrinfo | WC-l
  * 256 *.
  prtconf | grep 'memory '.
  Memory size: * 130784 MB *.
  psrinfo - pv
  The physical processor has 64 virtual processors (0-63)
  UltraSPARC-T2 + (chipid 0, clock MHz 1414)
  The physical processor has 64 virtual processors (64-127)
  UltraSPARC-T2 + (chipid 1, clock MHz 1414)
  The physical processor has 64 virtual processors (128-191)
  UltraSPARC-T2 + (chipid 2, clock MHz 1414)
  The physical processor has 64 virtual processors (192-255)
  UltraSPARC-T2 + (chipid 3, clock MHz 1414)
  
  There are a lot of settings Oracle automatically design based on the number of CPUs.
  In my case, this number is too high.
  
  For example, normally db_cache_size = 4 MB * cpu, in this case the result is 1 G of db_cache_size.
  
  The plan is to create several databases on this car, so the question is:
  
  Is there a way to design or to tell oracle a different number of cpu?
  and in general...
  You have some tips on how it is possible to configure a machine so powerful that runs a large number of instances?
  
  
  Thanks in advance
  
  Published by: Spugna on May 7, 2012 03:01

  Hi Spugna,

  Of course, as long as you use Oracle 11 g you can use Instance Caging to limit each database, the CPU usage. Although it is no longer applicable to the single server database or a CCR node I see no reason why not to use with RAC. Look here for more information:
  http://docs.Oracle.com/CD/E14072_01/server.112/e10595/dbrm007.htm

  You could also consider the consolidation of these different in a large database of databases if it is possible and there is no dependence application?

  Kind regards
  EVS

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• Satellite M40-285 - CPU overheating after the accident with water

  Hello everyone,

  I have a Toshiba Satellite M40-285, and 2 days ago, my girlfriend dumped a cup of tea on the keyboard... The computer turns off after a few seconds. Immediately, I put the laptop upside down and disassembled parts. There was some liquid inside (especially inside the speakers under the keyboard and where is the DVD unit). Other parts (CPU, memory, wireless card, hard drive area) were completely dry. I have it with napkings and dry with a hair dryer (later I read that I shoud never use a hair dryer...).

  The turs laptop on one seems to work fine (only the first screen where it says toshiba remains more than normal long (15 seconds or more) before entering windows). But the problem I have is that the CPU gets overheated and the laptop shuts down after 5-15 minits of use. I'm getting attention via the RightMark utility I said "* Core overheating * ' and the temperature always between 45 - 55 c

  I replaced the thermalgrease but the problem remains. The CPU fan works (I think that the two speeds). The heatsink is very hot after the computer turns off (it burns my fingers if I touch)

  What could be the problem? * Is the processor damaged? Can be a problem in the motherboard? *
  I don't know what to don't know because is not woth the money to send it to the technical service, but I can't buy a new laptop now...

  Hey,.

  I m wondering that the laptop is still ongoing and no more parts are damaged. In addition he s very cool that you could fix it yourself and dry. Many people don t know how ;)

  In any case, if the CPU is overheating it seems that something on the assembly or the cooling fan is damaged and must be replaced. Possibly peut t fan run with the highest speed more, who knows.

  Of course, it is difficult to say what is the cause of the problem, but in your case I would try ordering a new fan and the heatsink too. The two parties shouldn't t be expensive and it seems that you can replace yourself.
  So just contact a service provider allowed in your country to order these parts. They can do this.

  Good luck and feedback would be great, I am interested on this! :)

• The upgrade of the P6510f with a Phenom II 965 Black Edition CPU

  I have a HP P6510f computer.  Originally, it had an AMD Athlon processor 4 630 X in it.  However, I bought a Phenom X 4 965 Black Edition. I improved the diet to a thermal take 500 watt and installed a GT 240 DDR 5 low profile card and I have 16 GB of ram.

  However, when I used CPU - Z, it is said that the basic speed is only 798,01 mhz.  But all my other friends have basic speeds similar to 4 times that speed, but they have different computer systems.  They said that I needed to change the speed and frequency in the bios.  However, when I press F10 to get to the top of cmos, I notice that the ability to change the speed or the CPU is grayed out.  Is not equipped for overclocking HP mother?  Do I have to buy a different motherboard?  I don't want to increase a lot!  Only a few megahertz.

  I cleared the CMOS three times.  Whenever I did, I would restart the system and for about 10/20 seconds, CPU - Z would say my basic speed was 3600.00 mhz.  But then he would go back to the 798,01 mhz 30 seconds later.

  Here are the specifications of your HP Pavilion p6510f desktop computer and here is a list of BIOS settings for motherboard Μatx-RS880-H (Aloe) in your computer. The 'CPU Type' and 'CPU Speed' are grayed out because they are information fields only. The motherboard does not support overcloking and "Black Edition" CPUs are not supported by this motherboard. According to AMD, the base/core speed for the Phenom™ II X 4 965 Black Edition CPU is 3400 MHz. Note also that there are two different Phenom II 965 4 processors X... with a TDP of 125 watts and the other with a 140 watt TDP. Your motherboard only supports valid processors up to 125 watt TDP.

• ThinkPad T510 problem with the CPU frequency

  Hello
  I was a problem with the CPU frequency - in DC or battery it works 1/2 frequency (1196 MHz), but when my thinkpad plugged and is with battery it works OK (2400 MHz).
  Do you have any suggestions how to solve this problem.

  ThinkPad T510 (4384) intel core i5, 6 GB of Ram.
  Thank you.
  Best regards Nikolay

  What your seeing is actually normal and a result of power management settings. When it is on battery, the reduced CPU clock speed to improve the battery life and only increases in speed if a program requires processing power (games, adobe photoshop, CAD, etc.). If you wish, you can disable this feature by setting the "maximum performance" option in the Lenovo power management program and get into the bios and disable "Intel Speedstep" and similar power options setting. I hope this helps.

  -Brian

• HP ProBook 6550 b / WL560AV: hppa_service.exe with 24% of the CPU

  I had some problems with my laptop and the process of troubleshooting, I downloaded and installed the HP Support Assistant.  Since the reboot after installation, the resource (resmon.exe) monitor showed HPPA_Service.exe at the top of the list for the use of the CPU, stable running, between 24% and 25%.

  I don't remember whether I gave him permission to install/run Power Assistant.  I don't think it worked before; If she she has never appeared as a problem anywhere so I was not aware!

  I don't want HPPA_Service.exe to 25% of my cycles use cpu full time.  What is the best way to make it stop?

  You can uninstall programs and features. If you want to reinstall you can find on your support page.

  Click on the link below, click on the "drivers and software", and then type your model number in the search box and then press ENTER, when loading the page select your operating system. Pilot your page will appear.

• HP 550: updated hp 550 memory and cpu with the unconventional settings. is not ideal, but not other choice

  HI guys, I hope you can help or at least give a point in the right direction. I am a freelance photographer with a large part of the suite creative Adobe CS6. After a disaster of a week, I came home to find the motherboard on my editing station is fried somehow. I don't know what happened though I wouldn't put past my inattention of roommates.
  I'm desperate. I have to finish my current job until I'm able to afford to buy a replacement. So I have to rely on stop-gap measures, in desperation to finish my project, that are less than ideal, but so far are doing better than I'd hoped.
  Im a photographer, Capture One, Adobe Photoshop Lightroom, Adobe Photoshop and Premiere Pro are the go for workaholic applications that I need to work. without them I have no income. in order to have this machine run these applications,
  the machine I have left is an old hp 550 that was gathering dust in the closet. It was built for 32 bit Win XP and in no case is designed to run adobe products food pork I use, particularly of Lightroom.
  Unfortunately PS with Lightroom and first are 64-bit programs and LR and first are hyper threaded. so I did some research and with the help of the list of the utility windows 7 Advisor to upgrade instructions, I was able to get windows 7 Pro 64-bit to install and run.

  I know that this is not the ideal machine or the situation, but for a few weeks, I need to make it work.

  I really just 2 simple questions. First of all, I went to the HP technical support. but they were not useful. as the guarantee of the laptop are long gone, they would be not even polite and basically told me to shove off. Then on another forum, I called back and comes with a knowledge it all who constantly insisted on the fact that there was no way no how this pc could run 64 bit win 7, which i thought what am I seeing things? It works very well for 3 months. So I decided to come to you. your forums were useful on many occasions.

  Basically, I need this machine to run these programs during the next month or two, until I can buy a new machine.

  essentially, what I want to know, it's the motherboard support an upgrade of the processor? and if anything goes, what do you suggest as a substitute, given my needs? The Core 2 duo is the bare minimum of what I can limp with like photo/video rendering times are excessively slow.

  then I was talking to the support staff essential tech upgraded memory. and possibly set the bios to force to run 8 gigs of ram. They said that they have cold cannot find any version of bios that would make that possible, but only by forcing already run 64 bit, which has already allowed the pc to use the full 4 GB of ram, which was impossible in the 32-bit format. He suggested that I buy 2 4 gig modules such as 4 GB DDR2 PC2-5300 unbuffered NON - ECC, 1.8V 512Meg x 64 which can be seen at http://www.crucial.com/usa/en/memory/ct51264ac667 and try to install the full 8 concerts and see what would happen, saying that he had a feeling that I might get lucky. his logic is that the 64-bit system already open the ram limits and who knows, you can't make an omelet without cracking of eggshells! It seemed very optimistic. So, what do you think? It seems likely you because I love to work. or do you think the guy was a quack? and this whole endeaver is a waste of time and money?

  also, any other suggestions on how to time this month long storm that do not involve suggestions of buying new machines would be appreciated!

  so that you have accurate details below are my system specs.

  Hewlett-Packard HP 550 F05
  System serial number: CNU90716GN
  Inventory number: CNU90716GN
  Chassis serial number: CNU90716GN
  Case type: portable

  Windows 7 Professional (x 64) Service Pack 1 (build 7601)
  Install language: English (United States)
  Local system: English (United States)
  Installed: 04/08/2014-18:21:11
  Start mode: BIOS (Secure Boot not supported)

  Processor and b main circuit
  1.80 GHz Intel Core2 Duo processor
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached
  64-bit ready
  Multi-core (2 total)
  Not hyper-threaded Board: Hewlett - Packard 3618 KBC Version xx.xx
  The bus clock: 200 MHz
  BIOS: Hewlett-Packard 68MVU worm. F05 19/01/2009

  Readers of memory Modules c and d
  2320.47 GB drive hard usable capacity
  959.16 gigabytes of free disk space

  HL-DT-ST DVDRAM GSA - T50L ATA Device [scanner]

  Hitachi HTS543216L9A300 [hard drive] (160,04 GB) - drive 0, s/n 090108FB0200VCCPYM3B, rev FB2OC40F, SMART location: healthy
  ST1000LM 024 HN-M101MBB USB Device [hard drive] (1000,20 GB) - drive 3
  ST310005 USB Device [hard drive] 28as - 1 player
  WD 1600JS external USB Device [hard drive] (160,04 GB) - disc 2, s/n WD - WCANM2342148 4088 usable MB installed memory

  Slot ' DIMM #1' has 2048 MB (serial number 0000202 A).
  Slot ' DIMM #2' has 2048 MB (serial number 00004042).

  Thank you friends! I can't wait to read your tips!

  Jodie

  Here is the Manual:

  Repair manuals

  Unfortunately, the maximum configuration is a processor T5670 1.8 ghz and 4 GB of DDR2-667 memory, you already have. The CPU includes the 64-bit instructions is not surprising, that it can run Windows 7 64-bit. My best advice is to save your money for when you can get a real working machine. The only other likely to help is a solid state drive, you might use in the laptop and then also use the new computer that you intend to buy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.