I have my computer give a problem after installation CC LR accendentialy

Similar Questions

• Boot problem after installation of Linux Mandrake 10

  Hello!
  I installed Mandrake 10 on my computer toshiba tecra S1 laptop.
  But after installation and restart, the laptop stops in sequence starting with the toshiba logo.

  I tried the F12 key to select the boot device, but it does not work.

  If you have a solution to this problem please tell me.

  Thanks in advance.

  Hello

  It is not easy to tell what the problem may be, but it is possible that the boot manager not properly installed.

• Problems after installation with XP Service Pack 3 (screen please wait too long)

  After the automatic updates is ready to install and upgrade to SP3 of XP SP2, I have selected only quick installation and the installation progress. For a few minutes, everything seemed perfect, and I could see "Validating license... blah blah components loading... create restore point etc..". And after that, I was responsible for "System restart" I did. And then, the system displays a black screen of "Windows XP" showing "Please wait...". "and the screen is left as it is around 6-7 hours and the 256 Kbps, the internet was still on. After that, I wake up, find the same on the screen and close by the computer strength.

  After the reboot, I've seen the system configuration of Windows XP Professional SP2 to SP3. And one of my theme request then said that "he delivered a fall has resorted to previous settings.

  So, is my Windows corrupted, or incomplete installation? How will I know that the installation is successful? Please guide.

  Thank you

  Hi xploreaj,

  I noticed that often happens when a system has something like Norton or McAfee installed and that it has not been disabled prior to installation of the SP3.  If you encounter any other problems, then it is reasonable to assume that everything is ok.  However, you can also scan your system with Malwarebytes to see if there is no infections present which your current AV software has not picked up on. (how to use Malwarebytes: http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-malware-tutorial).

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• Problem after installation of window upates

  Original title: windows 7 problems because microsoft updates this week

  Hello

  Since the latest windows updates this week, MS computer windows 7 my husband does not work correctly.

  Most of the time there was no internet connection, although my laptop in the same room connects.

  Worse, it's his slider has the circle of rotation that continues for hours.

  I did F8, then: Startup Repair. memory diagnostic; System Restore (pre update); last good configuration...

  I'm not grumpy, so don't want something complex to do.

  Without a doubt-related updates.

  His computer crashed the first time they went, in automatically.

  When I finally received it goes and makes system restore, then downloaded the updates one by one with reboot between each of them and create a system restore point before each new updated the laptop seems to work again.

  Stop us it, but the major problem started once it was lit again in the afternoon. Really frustrating and such a waste of time.

  Any suggestions?

  Do not clean the computer and reinstall, so please do not suggest that.

  My deep gratitude.

  JM

  Hello Craig,.

  I understand the inconvenience you encountered.

  According to the description, I understand her you are facing problem after installing windows updates.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. What is the brand and model of your system?

  3. Are you an error message\ error code on your system?

  To resolve this issue, you need to determine the cause of the Windows Explorer to stop functioning, try the troubleshooting steps below to help decide the issue.

  Method 1.

  Step 1. Try to go into safe mode with network and check.

  Start the computer in safe mode and check if the problem persists. Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  To switch to safe mode see the link given below

  Try to go to safe mode with networking and check.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2 System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• Problem after installation of the uniblue registry booster

  After installation, I started to make a request to make changes to this computer to yahoo and google bars of tools, then adobe who, most or all it's demand for the flash player to make changes to this computer. to do this, these pop-up windows asking constantly especially when change page or just read a. the toolbaars can ask once, but takes three clicks to accept the order, adobe flash player allow takes 5 clicks stops and then restarts and continues until I shud turn off the PC. Can anyone help?

  Hello

  Firstly uninstall the UniBlue - Panel configuration-programs and features or check with
  UnIBlue support for uninstallation methods.

  ----------------

  Then use the system restore BEFORE you uninstalled UniBlue which will ensure
  None of this is left in effect on the system.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

• Problem after installation of SP3. Computer is restart only time and time again.

  Last night, I did a Windows Update, I've upgraded to Service Pack 3. My computer was low disk space, so I deleted a lot of files that I have acquired over the years. I also removed the programs that have been rarly used to free up more space. Finally, I was able to install service pack 3.

  Retstart routine my computer to take effect and boy did. When the computer starts it constantly reboots over and over again. I can't access my profile if I'm not in safe mode.

  When the computer starts, it displays this message. We are sorry for the inconvince but there may be a recent display hard or software causing Windows does not start correctly

  What can I do to solve the problem?

  What is the brand and model of your PC?

  If it is a HP and has an AMD processor, see the following page:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01457284

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• HP Pavilion HPE h9-1100 Phoen: computer hangs during startup after installation of 970 GTX

  The problem:

  So here's the deal. I bought a new EVGA GTX 970 and installed in my office (after you have uninstalled the drivers for my old AMD GPU). When that I start it freezes on the BIOS screen. Press a button and the screen goes black; It is still frozen. Fan works in beast mode, until I turn it off.

  What I tried:

  • I checked for if sure it was well installed in the x 16 PCIE slot and connectors double checked.
  • Checked to see if my motherboard supports UEFI (it does)
  • Using another monitor using vga instead of as before display port.
  • EVGA called and suggested they updated my BIOS on HP site (I think I'm already on the latest version)?
  • Called HP and they said I have spend $250 to have a technician to work on it. (I'd rather not pay nearly as much as I paid for the card to install it if I can avoid...)
  • Remove the battery on the motherboard for 5 minutes then replace and powered with the new graphics card.

  None of these things had No effect. (with the exception of the money payer which I have not yet made). I put the old card (Radeon 7670) back in and it started late.

  I'm kind of grasping at straws at this point. Any help would be greatly appreciated.

  Model: h9-1100 (A5U16AV #ABA)

  OS: Windows 10 Pro (64-bit)

  Motherboard: Gigabyte 2AC8 (970 (RX980) + SB950 chipset AMD)

  Processor: AMD FX-8150 (3600,0 MHz)

  BIOS: Ang_716 (05/04/2012)

  I would like to know if there is relevant information, that I left out.

  -edit

  I tried to install the card in HP h9 1300 t friend (he also recently installed the same card) it worked fine, if the card is not defective. Then we installed his gtx 970 in my computer. Same results as before. Startup freezes on the bios screen.

  Sure that I narrowed down it to a compatibility problem with my motherboard. I ordered a new one, the ASRock 970 M Pro3 AM3 + / AM3 AMD 970 + AMD SB950 6 x SATA 6 Gb/s USB 3.0 Micro ATX AMD Motherboard (bite). I'll post here once again with results once it arrives here in a few days. I cross my fingers.

  Hello

  The level of the BIOS of your PC is not compatible with the video BIOS in the NVIDIA GTX 970.   You need a BIOS to version 8 HP which is not displayed for your PC.

  BTW - A replacement of the card mother not HP will require a new license of Windows.

• Problem after installation of SP1 on my laptop

  Windows Update prompted me to install SP1. thought it was another update so let it. But after installing I rebbooted my laptop and got an error:! oxc0190036! 1501/91936 (netprofm.dll) I rebooted and ran the Startup Repair. After he runs Windows continues to start and then screen works in black with text of registry and gets stuck or feezes on the line above again. Need help!

  There is no anti-virus installed in my computer

  The lack of antivirus real-time protection isn't the source of your problem, Vista SP1.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Video problems after installation of NAP on Windows7

  I'm rebuilding my computer (XPS 400) after a hard disk failure, installed OS (Windows 7), and other programs without issue. I have a monitor relatively new U2312HM, (about a year), the drivers installed and software Power Nap of the disc, now at random, the monitor disconnects and connects again while working on the computer. This isn't a problem with screensaver, it happens when I'm active on the computer. Then he would go empty and come on little no matter what I did with the mouse or the keyboard. I had to make a hard stop down. Computer starts and all goes well, and then it starts all over again. Monitor works fine, press the menu, get message not getting input from the computer. I have a videocard, NVIDIA G-Force 6800 (original to the computer)

  Note, I uninstalled NAP without difference, also I am not under any demanding graphic programs. I suspect my graphics card goes... someone has any ideas?

  Specifications of the computer XPS 400, CPU speed 3.0 Ghz 4.0 GB RAM

  My computer specs, what card should should I need to replace?

  Hi wla57,

  As the problem occurs when you click on a link, you can try to copy and paste the link in a new browser window to see if it works.

  In addition, the problem is with Office 2003 and IE10, I suggest you to post the question on the Microsoft Forum as well.

  Please do not hesitate to answer for any further assistance. I'll be happy to help you further.

• Re: Satellite A505-S6040 - strange problem after installation of the NVIDIA driver

  Hello, first of all sorry for my bad English, but ill try to explain myself as best I can.

  I have a Toshiba A505-S6040

  I like 2 months

  My problem is that when I start the laptop and go to the desktop theres a certain point that stop loading... and it gets freeze here until I have to reset manually... (I can go trough well safe mode).

  I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed that there were a few problems, and so I changed it again drivers from the Toshiba web page.

  Well 2 days this is well... I might do normally...

  OK, I decided to use the recovery tool fromToshiba, but the same problem happened while isntallin drivers se... I don't know if it was coincidence, but just after it install drivers from nividia it just stop working again... it froze again... and now it won't let me start with an account , because it gets has frozen afe mode, only I can access my laptop...

  one thing I tried was unisitallin the drivers nvidia in SafeMode... and try to start the laptop... it worked... or at leat is not trapped, but since I made the recovery of Toshiba it won't let me start the session.

  I have really no idea what could it be... the grpahic card?

  Thank you.

  Hello

  > I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed there were a few problems and so I
  > changed drivers again

  It looks like a card driver from nvidia.com graphci causes freezing. In addition, it is not recommended to only use not pre-tested by Toshiba driver. Toshiba drivers are modified to support protection against overheating. So, use only the drivers of Toshiba driver page.

• Problem after installation of Windows XP Home on Satellite L355-S7812

  Hello

  I went down to WXP and after that, I have problem with the display driver. It does not work. I tried to use the Toshiba site and installation was successful, but without effect. Information about Device Manager, is that this driver is corrupted or missing. Drivers from the Intel site is not allowed to install. I have Mobile Intel 965 Chipset Family Extress.
  I also have the problem with some "IDE Device" I don't know what it is.
  I tied with WXP + SP2, SP3, and Windows XP Home edition. The same result.

  Help, please.

  Hello

  Strange sounds, running an Intel display driver won´t. It is the first time I ve never heard for such a thing. First of all:

  Installed all THE drivers of Windows XP on the Toshiba site? It's really important because there are essential tools that are the reason this machine works correctly and with his overall performance and stability.

  Are installed the chipset drivers? If Yes, then I do not double because the display drivers intel today should be able to be installed on your machine.
  What display driver you have installed? There are different types for the same chipset, and you should be careful when downloading these drivers for your machine. You should always look for drivers who adapt for MOBILE chipsets. In this case, you should look for the 965 Express mobile chipset.

  Regarding your problem of IDE device: do you have that you have installed the Intel Matrix Storage Manager Manager? See also the Intel site for this driver and the problem should go away.

  Welcome them

• Problems after installation of Service Pack 3 for Windows xp?

  After you install service pack 3, he started down, then when he tried to start it, nothing, that would make the windows logo then a blue screen. I tried to do a system restore, nothing, I tried to move the date of return in the bio, still nothing, I was payin 120.00 for someone to sit in front of my computer for 3 hours and IT couldn't work, but he ended up doing a full system restore, fortunately, I still have my photos and music but now his works more slowly. He guard tells me to download the package, tried again and poof, done the SAME thing again, this time I did the full restore again and now I'm not even download package. Y at - it something I can do or download for my computer as if it was. I did Defrag, I did the cleaning disc, cookies.etc... I clean up all this. I'm afraid to download updates due to what happened before... Help!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it! [1]

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require to install WinXP SP3).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ==============
  [1] one who made the "repair" work & you charged $120 to do a repair installation does not know his a * of his elbow. IMHO he should take care of all of the foregoing to you free of charge.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Log on problem after installation of the sp3

  Hi there forgive me if this is old news, but I just bought an old laptop for children. The seller has installed xp pro top with IE 8.

  I installed the latest java, W. Media Player. I had a browse through updates and he said that auto updates can not be read if my system is up to date. So I thought that I should install SP3. Once this is done I did the reboot and start-up of the machine re I got the newspaper of the administrator on request of password. When I bought this machine and it works, he never requested a password and went directly to the screen, probably because it was only a single account. the seller told me that he had installed a hard drive cool and a new copy of XP pro. There is a sticker on the back of the machine activation key.

  I tried many combinations of passwords, including the sellers name, leave blank and just pressing ENTER. tried Ctrl alt del all resulted in nothing.

  I contacted the seller and he said that he never put a password and therefore cannot (or will not help) I looked on the web for some ideas, including starting in safe mode, but the info it says it will ask for a password, but I am. I am now locked out of my machine. Help, please. Thank you

  On Monday, April 7, 2014 21:12:58 + 0000, DeanChaytor wrote:

  On Monday, April 7, 2014 20:29:13 + 0000, DeanChaytor wrote:

  Hi there forgive me if this is old news, but I just bought an old laptop for children. The seller has installed xp pro top with IE 8.

  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you
  do not reinstall Windows properly.

  Thanks for the reply.

  You are welcome. Happy to help you.

  To do a clean install, what I have to buy a new version or I can just a xp pro disc and reuse the key at the back of the machine, provided that they are ok.

  If you have a product key on a sticker, it's an OEM version. You can
  use the disc to a friend, if the sound is also OEM. Try to find a friend with the
  same brand of computer.