Problem after installation of SP1 on my laptop

Similar Questions

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• Boot problem after installation of Linux Mandrake 10

  Hello!
  I installed Mandrake 10 on my computer toshiba tecra S1 laptop.
  But after installation and restart, the laptop stops in sequence starting with the toshiba logo.

  I tried the F12 key to select the boot device, but it does not work.

  If you have a solution to this problem please tell me.

  Thanks in advance.

  Hello

  It is not easy to tell what the problem may be, but it is possible that the boot manager not properly installed.

• problems after installing Vista SP1

  I have Vista 64 Business edition. I managed to install SP1 from a MS DVD.

  The only problem is that after installation I can't get internet connection.

  I'm on broadband with Tiscali/Talk Talk and my connection is cable to router Thomson TG585 v7.

  If I uninstall the update SP1 my internet connection works perfectly.

  Talk Talk were unable to help.

  Thank you very much

  Geoff

  I have Vista 64 Business edition. I managed to install SP1 from a MS DVD.

  The only problem is that after installation I can't get internet connection.

  I'm on broadband with Tiscali/Talk Talk and my connection is cable to router Thomson TG585 v7.

  If I uninstall the update SP1 my internet connection works perfectly.

  Talk Talk were unable to help.

  Thank you very much

  Geoff

  Download the drivers from the hardware manufacturer for the device INSIDE the computer network.

  What is a clean install of Vista or something (why just get installed SP1 - since SP2 came out for years)?

• Re: Satellite A505-S6040 - strange problem after installation of the NVIDIA driver

  Hello, first of all sorry for my bad English, but ill try to explain myself as best I can.

  I have a Toshiba A505-S6040

  I like 2 months

  My problem is that when I start the laptop and go to the desktop theres a certain point that stop loading... and it gets freeze here until I have to reset manually... (I can go trough well safe mode).

  I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed that there were a few problems, and so I changed it again drivers from the Toshiba web page.

  Well 2 days this is well... I might do normally...

  OK, I decided to use the recovery tool fromToshiba, but the same problem happened while isntallin drivers se... I don't know if it was coincidence, but just after it install drivers from nividia it just stop working again... it froze again... and now it won't let me start with an account , because it gets has frozen afe mode, only I can access my laptop...

  one thing I tried was unisitallin the drivers nvidia in SafeMode... and try to start the laptop... it worked... or at leat is not trapped, but since I made the recovery of Toshiba it won't let me start the session.

  I have really no idea what could it be... the grpahic card?

  Thank you.

  Hello

  > I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed there were a few problems and so I
  > changed drivers again

  It looks like a card driver from nvidia.com graphci causes freezing. In addition, it is not recommended to only use not pre-tested by Toshiba driver. Toshiba drivers are modified to support protection against overheating. So, use only the drivers of Toshiba driver page.

• Problem after installation of window upates

  Original title: windows 7 problems because microsoft updates this week

  Hello

  Since the latest windows updates this week, MS computer windows 7 my husband does not work correctly.

  Most of the time there was no internet connection, although my laptop in the same room connects.

  Worse, it's his slider has the circle of rotation that continues for hours.

  I did F8, then: Startup Repair. memory diagnostic; System Restore (pre update); last good configuration...

  I'm not grumpy, so don't want something complex to do.

  Without a doubt-related updates.

  His computer crashed the first time they went, in automatically.

  When I finally received it goes and makes system restore, then downloaded the updates one by one with reboot between each of them and create a system restore point before each new updated the laptop seems to work again.

  Stop us it, but the major problem started once it was lit again in the afternoon. Really frustrating and such a waste of time.

  Any suggestions?

  Do not clean the computer and reinstall, so please do not suggest that.

  My deep gratitude.

  JM

  Hello Craig,.

  I understand the inconvenience you encountered.

  According to the description, I understand her you are facing problem after installing windows updates.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. What is the brand and model of your system?

  3. Are you an error message\ error code on your system?

  To resolve this issue, you need to determine the cause of the Windows Explorer to stop functioning, try the troubleshooting steps below to help decide the issue.

  Method 1.

  Step 1. Try to go into safe mode with network and check.

  Start the computer in safe mode and check if the problem persists. Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  To switch to safe mode see the link given below

  Try to go to safe mode with networking and check.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2 System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• I have my computer give a problem after installation CC LR accendentialy

  I have my computer give a problem after accendentialy installation LR CC while I had 6.4 LR, no CC. I could not come back, and a new installation be not admitted. The CC tool does nothing and now I have a huge problem.

  I install windows 7 now still fresh on my pc and install again LR 6.4. I read diverend answers on the forums, my question is: should I turn you off my first LR? I can not install 6.4 and have temporary installed 5.7.

  Under the help button I would not find a deativate more. What should do?

  Hi rfh.

  Please let us know what exactly is the issue that you are facing after installing Lightroom CC?

  If you already have Lightroom 6.4, Lightroom CC will not be installed separately.

  The CC tool does nothing and now I have a huge problem.

  Please visit Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  I read diverend answers on the forums, my question is: should I turn you off my first LR? I can not install 6.4 and have temporary installed 5.7.

  Under the help button I would not find a deativate more. What should do?

  Lightroom does not disable the menu help . Uninstalling Lightroom should turn off.

  Kind regards

  Assani

• Problem after installation of the uniblue registry booster

  After installation, I started to make a request to make changes to this computer to yahoo and google bars of tools, then adobe who, most or all it's demand for the flash player to make changes to this computer. to do this, these pop-up windows asking constantly especially when change page or just read a. the toolbaars can ask once, but takes three clicks to accept the order, adobe flash player allow takes 5 clicks stops and then restarts and continues until I shud turn off the PC. Can anyone help?

  Hello

  Firstly uninstall the UniBlue - Panel configuration-programs and features or check with
  UnIBlue support for uninstallation methods.

  ----------------

  Then use the system restore BEFORE you uninstalled UniBlue which will ensure
  None of this is left in effect on the system.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

• Laptop will not load after installation of SP1. "!! Oxc01a001d! 28497/89893 (\Registry\Machine\COMPONENTS\DerivedData...) "is displayed after the start!

  I have a Toshiba Satellite. Running Windows Vista Home premium 32 bit.
  It was working fine until I tried to intsal Service Pack 1 through Windows install after having been invited by windows that he criticized the update.

  Now windows won't start. I tried the Safe mode, but it stop at the "Loaded: \windows\system32\drivers\crcdisk.sys ' telling me to wait, but it does nothing.

  I tried to start another option but they all end in error. Oxc01a001d! 28497/89893 (Registry\Machine\COMPONENTS\DerivedData...) »

  Someone please HELP!

  I was able to fix the problem by reinstalling windows using the Installation DVD of Vista. He did a "fresh" Reinstall. To do this you first have to set the BIOS to boot from the CD drive instead of the hard drive.
   
  Instructions to do so can be found here: http://techpaul.wordpress.com/2007/08/03/how-to-boot-from-a-cd/

  Insert your Vista DVD and choose repair or install. My Vista files have been basically corrupt but not your strength. If they are not to select Repair will give you the opportunity to do a system restore.

  Don't forget to reinstall Vista to wipe your hard drive and you will lose your files. System Restore will not. But if you supported rose them to an external drive or online so no problem!

  I hope this helps!

• Problem after installation of Windows XP Home on Satellite L355-S7812

  Hello

  I went down to WXP and after that, I have problem with the display driver. It does not work. I tried to use the Toshiba site and installation was successful, but without effect. Information about Device Manager, is that this driver is corrupted or missing. Drivers from the Intel site is not allowed to install. I have Mobile Intel 965 Chipset Family Extress.
  I also have the problem with some "IDE Device" I don't know what it is.
  I tied with WXP + SP2, SP3, and Windows XP Home edition. The same result.

  Help, please.

  Hello

  Strange sounds, running an Intel display driver won´t. It is the first time I ve never heard for such a thing. First of all:

  Installed all THE drivers of Windows XP on the Toshiba site? It's really important because there are essential tools that are the reason this machine works correctly and with his overall performance and stability.

  Are installed the chipset drivers? If Yes, then I do not double because the display drivers intel today should be able to be installed on your machine.
  What display driver you have installed? There are different types for the same chipset, and you should be careful when downloading these drivers for your machine. You should always look for drivers who adapt for MOBILE chipsets. In this case, you should look for the 965 Express mobile chipset.

  Regarding your problem of IDE device: do you have that you have installed the Intel Matrix Storage Manager Manager? See also the Intel site for this driver and the problem should go away.

  Welcome them

• Problems after installation of Service Pack 3 for Windows xp?

  After you install service pack 3, he started down, then when he tried to start it, nothing, that would make the windows logo then a blue screen. I tried to do a system restore, nothing, I tried to move the date of return in the bio, still nothing, I was payin 120.00 for someone to sit in front of my computer for 3 hours and IT couldn't work, but he ended up doing a full system restore, fortunately, I still have my photos and music but now his works more slowly. He guard tells me to download the package, tried again and poof, done the SAME thing again, this time I did the full restore again and now I'm not even download package. Y at - it something I can do or download for my computer as if it was. I did Defrag, I did the cleaning disc, cookies.etc... I clean up all this. I'm afraid to download updates due to what happened before... Help!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it! [1]

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require to install WinXP SP3).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ==============
  [1] one who made the "repair" work & you charged $120 to do a repair installation does not know his a * of his elbow. IMHO he should take care of all of the foregoing to you free of charge.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems after installation with XP Service Pack 3 (screen please wait too long)

  After the automatic updates is ready to install and upgrade to SP3 of XP SP2, I have selected only quick installation and the installation progress. For a few minutes, everything seemed perfect, and I could see "Validating license... blah blah components loading... create restore point etc..". And after that, I was responsible for "System restart" I did. And then, the system displays a black screen of "Windows XP" showing "Please wait...". "and the screen is left as it is around 6-7 hours and the 256 Kbps, the internet was still on. After that, I wake up, find the same on the screen and close by the computer strength.

  After the reboot, I've seen the system configuration of Windows XP Professional SP2 to SP3. And one of my theme request then said that "he delivered a fall has resorted to previous settings.

  So, is my Windows corrupted, or incomplete installation? How will I know that the installation is successful? Please guide.

  Thank you

  Hi xploreaj,

  I noticed that often happens when a system has something like Norton or McAfee installed and that it has not been disabled prior to installation of the SP3.  If you encounter any other problems, then it is reasonable to assume that everything is ok.  However, you can also scan your system with Malwarebytes to see if there is no infections present which your current AV software has not picked up on. (how to use Malwarebytes: http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-malware-tutorial).

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Option of surround sound clothes outside with HD4870 HDMI connection after installation of SP1 Vista54

  Clothes outside with HD4870 and HDMI connection surround sound option
  I just built an HTPC and installed SP1 Vista64 and I have a problem. I have a DFI LanParty very X 58-T3H6 motherboard and a VisionTek Radeon HD 4870 video card with HD audio. I have a HDMI cable to my Sony AV receiver and all I get is Audio stereo. The subwoofer never wakes from sleep, or AV receiver indicates anything but a stereo input.

  I have the RealTek HDMI audio device installed, and he says he's working properly in Device Manager. Under properties, what is proposed is stereo speakers. Surround sound is presented as an option, but it is grayed out and not selectable. All drivers are up to date from four days and I have the on-board sound card mother disabled in the BIOS and it does not appear in the Windows Device Manager, nor are there any other audio device except the RealTek HD HDMI audio device.

  Other HDMI devices, such as my XBOX 360, a surround sound very well via the AV Sony receiver.

  VisionTek support told me to install the RealTek HDMI driver, I did, but that's all the help they were able to give me.  The problem persists.  Surround sound is gray under sound properties for this device,

  I took the HDMI cable from HDMI port on the video card and plugged on my XBOX 360 and I get surround sound, so I know that the cable and the audio/video receiver is configured correctly.

  If anyone has an extra idea about it, I know you more!

  Thank you!

  Hi flattery.

  Thank you for taking the time to post.

  Can you please post here the result of your dxdiag in the forum?

  ·         Click on the Start Orb on the Office

  ·         In the Search box , type dxdiag and press enter

  Once you're in the DirectX tool, click Save all information and save on your computer. Open the saved file (must be a text file) and copy this information and paste it into the forums here so we can see again.

  1. What is the version of the BIOS that you run on your motherboard?

  2 have you ever had this installation or surround sound from always grey work?

  Please let us know.

  Thank you

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restart the problem after closing the lid of the laptop for a few minutes

  I use Windows 7 Home Premium on my Asus A53S. I have reboot issues a few minutes after closing the computer laptop lid eventhough I put what to do after closing the lid to "do nothing" for both on battery and the plug. And it will keep restarting over and over again. Rest

  Hi DennisHii,

  You did changes to the computer before the show?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Problem after installation

  Installation of PShop Elements 9, original disc with the serial numbers. It is an ligeit installation.

  Message problem: Config with licenses error code 213:19. This installation is on a laptop replaces a former use not in one.

  http://helpx.Adobe.com/Photoshop-elements/KB/licensing-problem.html