Bootable USB

Similar Questions

• Can I create a recovery bootable USB through disk utility?

  My HARD drive is dying, I can't access my Macintosh HD partition anymore and I can't reinstall OS because I SMART errors. Before the format and reinstall the attempt to load slow my computer, random errors, etc. So I definitely think that the HARD drive is near death. My plan is to replace my HDD for a Virgin SSD, I perform this task several times on computers of the victory but for MAC, I wonder how I will load the new OS. Can I make a bootable USB with the recovery partition, but on a USB key tools? Unofrtunately I have more available Mac to create the USB bootable through itunes.

  My computer is the MacBook Pro (13-inch mid 2010), I have also all original packaging somewhere, if there is a CD that I can use, I certainly can get too.

  Any advice?

  Thank you!

  Apple have this to do a USB installation...

  Create an installer for OS X - Apple support bootable

  Another option is to use the diskmakerx.com application

  You must have the OS installer downloaded to make these methods of work is probably not practice on your failed drive.

  Both of these options are to run a 'normal' operating system too. The recovery partition is not 'normal '.

  Another option is to use the Internet recovery mode if your Mac supports...

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  On macOS recovery - Apple Support

  Use wired ethernet for best results, since it will download a bootable OS & then download the installer of the OS also.

  I suspect you have the update of the firmware installed to add this feature if it has been updated over the last 3 years

  You may be able to generate a score of alternative recovery to another disk (such as a USB key) If you want to just "compensation of base OS.

  OS X: on Recovery Disk Wizard - Apple Support

  A last solution would be to clone your drive failing on an external drive (or use the new SSD in a proper case). That can be done in the modes of recovery via disk utility. Basically, you use a feature to "restore" to clone one volume to another. (I don't see clear instructions for the moment so ask if you want to pursue this option).

• Bootable USB Stick - El Capitan/Mountain Lion

  Using a MacBook running El Capitan, can I create a bootable USB key to run Cougar?

  Unless you've downloaded the OS X App Store before the publication of the Mavericks Mountain Lion, your only option is a purchase ($20USD) Cougar via the Apple store online. Once you have downloaded the OS X App Store ML using this purchase key, you can then run DiskmakerX top to make a USB bootable (8 GB min).

  The current (5.0.3) of DiskMaker X version only works with the Mavericks, Yosemite and El Capitan. Mountain Lion, to the 3.0.4 version on the developers site. It provides a direct download link to it. I don't know if this old X DiskMaker work on El Capitan.

• How can I create a bootable USB of OSX Snow Leopard on a MacBook with El Capitan?

  HI there, the hard drive failed on my MacBook unibody aluminum end 2008. a couple of years ago, I put in 8 GB of RAM so my thought has been that it is not yet time to entirely replace the MacBook. I replaced the drive HARD failed with a 500 GB compatible hard drive. I tried and failed to install El Calitan via a bootable USB key, because my machine is too old. I just ordered a copy of the Snow Leopard DVD on the Apple store. I wonder how I can install snow leopard on my computer, given that the DVD player on this subject does not? I am able to create a Version bootable USB of Snow Leopard on MacBook for my roommate? He is running to El Capitan. Could someone explain if this is possible and if so, how?

  Thanks in advance!

  If his MacBook has a DVD player and 2 computers have the correct wiring, try the target disk Mode.

  Target - Mavericks disk mode

  Target disk mode

• How to make a bootable USB using the disc with El Capitan utilities?

  Anyone know how to make a bootable USB key using the disc with El Capitan utilities?

  Try this its worked perfectly.

  http://www.Macworld.com/article/2981585/operating-systems/how-to-make-a-bootable - os-x-10-11-el-capitan-installer-drive.h...

• Your bootable USB key could not be created

  "Your bootable USB key could not be created.

  Hey guys,.

  I Googled what to do about this error message and all I got was to ensure that the ISO is disassembled. I did, and yet I still get the same exact error message. I'm trying to get Windows 7 Home Premium on a 2012-13 inch Mac Book Pro. I also use a flashdrive 16 GB for the ISO image. Any ideas on how to solve this problem?

  Please read: create an ISO image for the Boot Camp Windows installation media.

• Problem with createinstallmedia bootable USB to install the Mavericks then

  I have tried to make a bootable USB to install the Mavericks on an external partition (so I can continue to use iDVD)

  I downloaded Maverick install app from the App Store and I followed the instructions from Apple by create a bootable OS x - Apple support Installer

  Install OS x player Mavericks appears when I hold down the Option key when starting, but then crashes to a screen of a circle with a line through its Center (the international symbol for 'No!')

  I use OS X El Capitan on a Mac Mini (end of 2012)

  Anyone could advise on what I'm doing wrong?

  I used

  sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction

  in the Terminal

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• Re: Qosmio X 870-13 M - cannot use bootable USB key

  Hello

  I want to install Windows 8.1 on my home computer, I created a USB bootable with iso DreamSpark.
  I installed the version on PC, and then I want to install it on my laptop. Problem is that my laptop Qosmio X 870-13 M () does not start, or any other bootable USB device that works on another pc.
  I've tried everything. Updated the BIOS, it recognizes my USB when windows is activated, another key works fine on another pc. The BIOS is configured to recognize the USB.

  Can someone help me with this?

  + The message was edited: assignment has been translated.

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm or
  http://APS2.toshiba-tro.de/KB0/TSB2B03EX0002R01.htm

  Change the BIOS settings and try again.

• Satellite L300D-13s - how to create a Bootable USB Flash for Vista Recovery drive?

  Hello

  Has anyone ever created a Bootable USB Flash of their Vista HARD disk recovery drive? If Yes can you help me create mine? I know that you can do for the new OS and that Toshiba provides a tool for this.

  Thank you

  Something like this is not possible. I have older machine tool and I can confirm that recovery USB media cannot be created DVD only.

• Problem in el capitan bootable usb

  Hi guys!

  I tried to clean install my book mac pro via bootable usb and install el capitan (10.11) but when began to install and show 12 minutes remaining it says that the file cannot be verified and may be corrupt.

  my friends said capitan ela can be installed via usb

  is it good?

  What is the problem?

  You want to redo your boot usb drive. Yes, you can install OS 10.11 using a usb key.

• Bootable USB-CD/DVD drive need for Portege M200

  I couldn't find any list with bootable USB-CD-& DVD-ROM-drive for Portege M200.
  No boot on USB drive. Some change to the boot of other USB devices?

  Sorry for my English

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=45144

  Horwath user posted a link to the Toshiba document that gives all the information on the CD/DVD bootable USB drives.

  In addition, you can buy a compatible USB WEIRD of the ASP from Toshiba

• G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

  Hello
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07Hello,
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07

  EDWARD07

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

  To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.
  
  But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• make bootable USB el capitan

  Apple has a formal and proven method of creating an image of El Capitan bootable USB stick?

  Here's a way to create a bootable USB key.

  http://osxdaily.com/2015/09/30/create-OS-x-El-Capitan-boot-install-drive/

• Updated the BIOS via bootable USB drive

  I want to update the BIOS by using the ISO image provided. I want to write this image a usb, then on startup, the bios update. How to create bootable USB drive.

  My system is E430, although the question is pretty generic.

  Hi again, ahaider7

  I don't think that a program would be necessary. However, after doing more research, I'm not sure the work process. In addition, update the BIOS via USB is not supported, because as far as I know. If you want to update the BIOS of your machine, I highly recommend using the utility to update the BIOS. You can also burn the .iso to a CD and the image file.

  Kind regards

  Adam

• How can I make my drive external bootable usb to install xp on a web book?

  Book of the Internet is not equipped with any optical drives or the recovery partition. That's why windows is corrupted, I need to format and re install. I have a 40 GB usb external drive. and another pc to put the files with.

  Is this feasible?

  I don't know if this will help you.

  http://DownloadSquad.switched.com/2009/08/27/make-a-bootable-USB-Installer-for-Windows-XP-Vista-7-with-Wint/