border - only on one side of the pane thr

Similar Questions

• only one side of the race

  Hello, I have a side border at iteam.

  I can't know all the properties in flex / as reference how to apply STROKE only on one side of the element.

  would be happy to hear that any information about you.

  Thank you

  jbeynar

  There are different possibilities.

  For example, you can try s:Line or s:Path - both would give you a lot of flexibility.

  FTQuest

• HP Pro 8600 n911a Duplex printing only on one side

  Hi Im having proplem is im using the document feeder, try to use the duplex feat. and printing only on one side

  IM using paper 8 x 11, I've changed the setting for double-sided copying print settings can somone please help...

  Hello honorable31,

  Welcome to the Forums of HP Support!

  I appreciate that you try to use the double-sided copy document feeder. This model printer the N911a does not support the loading of double-sided documents. The N911g and the n supports the loading of double-sided documents.

  So that you can accomplish something similar to come, you will need to place the original on the glass, and then press copy > settings > both sides > 1 heads 2 copy. The printer is paused in the middle of the job to allow you to turn the page on the glass.

  I hope this helps.

• Why display started moving, as shaking from one side to the other?

  suddenly the screen has started to move from one side to the other, she stop for 2 seconds, and then continue to move, as shaking.

  Hello

  (1) what is the brand and model of your computer?

  (2) remember to make changes to the computer before the show?

  I would suggest trying the following methods and check if it helps.

  Method 1: Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2: Flickering of the Correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  I would say as you reset the settings of the monitor to factory settings and check if that helps.

  Please consult the manual of your monitor to perform the steps.

  You can also try to connect an external monitor to the computer to check if the monitor is defective.

  It will be useful.

• How to create a unique page on one side of the other view?

  I have a document that considers the side-by-side, except the first page.  I would like to see unique page and the ability to print a page by page!

  Any help?

  Thank you

  Blue

  Looks like you don't have a side-by-side, as it is normally referred to in Acrobat, but that the PDF file is actually a set of pages that are 2 pages per sheet. To be able to print a page of the worksheet, use the crop tool to select one side (and the same on all the leaves if you select everything). Then print this set. For other pages, simply move the culture across the sheet and repeat. Looks like it's what you're trying to do. If you want a single PDF file with 1 page per sheet, a crude to do this is to print each cropped to new PDF series. Then merge the two sets of printing and then rearrange the pages.

• Exit only on one side

  My ipod classic only gives me an audio output on one side. I tried several headphones, it's the ipod that does not reach me. Can any ideas on how I fix?

  Probably a problem of material with plug headphones.  However, you can try to do a Reset (reboot) of iPod

  Learn how to reset your iPod - Apple Support

  If this does not help, you can try to do a restore, in case the problem is related to the software.  This erases the iPod and assigns the default condition "factory".  The restore button is on the recapitulation of the iPod settings screen in iTunes.  If a restoration is not enough, it is likely to be a hardware problem.

  If it's a defective headphone plug, you can get audio out to the dock, with an accessory connector.  For example

  https://www.Amazon.com/GP/product/B004V9G58M

• OfficeJet 8610: OfficeJet 8610 when you copy in duplex, one side to the other side

  When I try to copy multi-page documents, goes to 1 side 2 sides, one side is upside down. This works when the pages are in portrait setup but not when they are in the configuration of the landscape.

  It's COPY, not print, so I can't follow the advice to replace the flip setting. There seems not to be a setting on the printer itself to change that.

  I did a chat session with HP, but the problem was not resolved. I got a call a supervisor (level 2, no doubt), but I have not worked with them again.

  The printer is connected wireless. I run the installation wizard and the Finder solution and the update as well as the doctor of printing and scanning without result.

  Any ideas?

  Hi @Tiggy626A,

  I see you are having problems copying 2 sides in landscape mode. I will definitely do my best to help you.

  From the front panel of the printer, you can bind only on the long side, there is no option to change the copy to the short edge. I tried to copy 2 faces on our Officejet 8610 laboratory, one side released head downstairs. By experimenting, I found a solution, by loading the two documents to copy in the ADF file, load the other down. This will allow the copy two facing the landscape properly the printer. I know that's not very practical, but it worked out this way.

  This feature is available if you choose to scan documents and then print as a 2-sided document with a link on the edge short.

  Here is a document for the HP Officejet Pro printers 8610 - copying Documents.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Since the evolution of firefox, I can't print emails except on one side of the paper

  You have changed the settings to my impression, and now I can't print emails. When I try to print an E-Mail he prints in very small characters and only on the left side of the document. Other documents can be printed.

  HOW CAN I POST A REPLY WHEN YOU HAVE NOT SOLVED THE PROBLEM?

• T410 audio port gives the output on one side of the enclosure

  I had a T410 recently and have been pretty happy with it.

  The problem is, my normal headset used to work initially, had no trouble getting sound in both left and right headset speakers. Then slowly I started to have trouble getting sound in my left ear piece. I had to twist and turn the connector and it would work occasionally and it does not work most of the time.

  I tested with two headphones that work with other devices, but when I connect it with this, I hear in my right atrium only. Speakers work fine.

  How can I solve this problem?

  Hi and welcome to the forum!

  I have 3 iPod headphones, 2 of them are compatible parts but the 3rd is authentic Apple. Headphones compatible when connected to my T400 with the same problem you are describing, the sound comes only from one of their ear pieces and me too I have to twist and turn in a certain position for its exit from both ends. However, the genuine Apple earphone works out of the box, but all these 3 headphones work fine with my iPod. My conclusion is that only connect headphones of good quality with the thinkpad.

  But the problem could be different, I suggest you look at this thread and Knowledge Base article, maybe what you need is just an adapter to resolve this problem: -.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/audio-combo-Jack-vs-Headphone-Earphone-with...

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T510-combo-mic-audio-port-usage/m-p/217613

  I hope this helps.

• IPSEC only from one side (side with rays)

  Hello

  I have a star with IPSEC configuration.

  If the interesting traffic comes to speak it, the IPSEC Security Association starts and works perfectly. However, once the link is inactive on and there is no traffic, the hub shows this with the command sh its crypto isa

  196.47.133.38 185.20.242.61 QM_IDLE 1017 ACTIVE

  SH cryp peer ips of his 196.47.133.38 shows nothing at all.

  I checked my itinerary and NAT refuse to ensure that is not the issue.

  I then checked the crypto ACL when I send the traffic, I see the crypto ACL are increment correctly, but still the SA will not turn on. If I look at ipsec debugging I see nothing.

  I use a dynamic with each end map spoke in its own ACL, as follows:

  Crypto-map dynamic dynmap 5

  defined by peer 111.116.206.92

  the transform-set des-transform value

  match address 171

  Crypto-map dynamic dynmap 10

  defined by peer 111.47.132.38

  the transform-set des-transform value

  match address 172

  Crypto-map dynamic dynmap 15

  defined by peer 111.174.150.47

  the transform-set des-transform value

  match address 173

  Crypto-map dynamic dynmap 20

  defined by peer 111.166.108.250

  the transform-set des-transform value

  match address 174

  Crypto-map dynamic dynmap 100

  the transform-set des-transform value

  match address 170

  c2800nm-adventerprisek9_ivs_li - mz.151 - 4.m6.bin on a 2811

  Any ideas?

  Thank you
  Alan

  HI Alan,

  1. Please remember that when you dynamic user cryptomaps they are most of the time used for the customer site or say remotely, access VPN but can also be used as a site to site vpn when you Wan to restrict this part can initiate the tunnel and another part with dynamic map can never inititte a tunnel , and in this condition your gateways never knows the IP address of the other side clientand so never begin a connection for users of the House or on the Internet in order to build a tunnel. Only home user have to inititite a connection for establishing a tunnel if necessary because he IP could be dynamic and HUB you never know hihc IP they will come as IP might change based on the location or the ISP you connect from.

  2. Once you give a dynamic cryptomap on you ASA, you mean you don't know other IP side together like said above, and only when the other side of the peers in this business case will initiate a tunnel and thus no established peer IP no sense in dyanamic crypto card.

  3. Once you set a dynamic crypto maps, you still havve to associate it with the crypto statsic map as you cannot associate a dynamic encryption directly map to our part = interface device.

  example of

  step 1

  set the network card crypto as follows:

  crypto dynamic-map mymap 1 set transform-set myset crypto dynamic-map mymap 1 set reverse-route
  
  (in line 2 you are instructing your ASA or HUB device that
  
  other client after establishing a client to site tunnel with this machine can insert
  
  a static route dynamically on the rop of the routing table so that the trafic for client can use static route instead of using defaut route and could save tie else it has to traverse through all the router to reach deault route very time communication happens between
  
  the new IP of the cleint machine from HOme iNternet to office firewall /ASAthe so that )
  
  
  step 2
  Now call this above dynamic map named mymap into a static crypto map(named dyn-map) as follows
   crypto map dyn-map 10 IPSec-isakmp dynamic mymap
  
  step 3
  Assign this static crypto map to an interface so as to actually apply dynamic crpto map as told befor eit cant be applied directly:
  crypto map dyn-map interface outside
  Please share the configuration of HUB and spoke ina  separate separate fille and state who is HU and who are spoke 1 spoke 2 spoke 3 and so on.
  Hope I could offer you more clear help after that.
  best regards
  sachin garg
  
  [email protected]/* */
  

• Cannot copy master items from one side to the other (pages face to face) with the help of stick in place.

  I am trying to copy text from one side of a master page two "facing pages" face to another using Paste in place, then I me identical Master Articles for both pages, but stick it in place is not working.

  I select one side of A-master in the pages Panel (where I have the master items), the copy, and then by selecting the other side of the A-master, then glue in place.  But the points just stick on top of the original ones.

  Drag the items by pressing the alt key on the other side. In addition the SHIFT key keep aligned.

• 110 eprint only prints one side

  My desire to 110 will be printed double-sided of the word etc. because it is set as default (both through the "HP printer Assistant" and "devices and printers", but when I send a document or print it ignores the parameter by default and print the front.)

  Any ideas on how to assign eprint duplex?

  Hi TheWooster,

  Welcome to the Forums of HP's Support.  I believe that when you send a print job to your Envy 110 use ePrint printer it does not print double-sided.

  EPrint currently doesn't support duplex (print on both sides of the page).  This information is found in the document Getting Started with ePrint under the FAQ entitled "are there restrictions when you use ePrint?

• How can I drag my clips of images from one side to the other quickly?

  Is it possible that I can drag a video clip of the right side to the left but faster that just take it

  and drag it to the left?

  I tried holding down SHIFT, alt, cmd, but key without success.

  Thanks for the help!

  Prior to zoom, select and cut out and then paste.

• Effect of green screen to only ONE SIDE of the split screen

  I know how to add a green screen... quite easy to drag an image in a video clip. However, I have a side-by-side video recorded where a participant has a green screen and the other does not. Basically, I try to have three layers:

  1 person with green screen video

  2 background image to go in the green screen

  3. any other person clip

  Can I do this in iMovie?

  iMovie supports only 2 layers.  You use final Cut Pro or similar to do more than two.  You can however share a clip with a layer and then re - import and add another layer.

  Geoff.

• PDF form - send again only one side at the post office

  I have a PDF file with 9 sites. I placed a small order form on page number 9 with a button to send the pdf to my email address. In the options, I can choose between some export options. Where can I find the Option "PDF - document as a whole.  Is there a way to send only the page number 9?

  ICH habe ein PDF mit 9 Inhaltsseiten. Auf der Seite, habe ich ein Bestellformular Internet, nach dem ausfüllen which last an meine E-mail-address zuruckgesendet werden kann. In den Optionen kann ich 'PDF - Dokument entire' Park. There're auch eine possibility, nur Seite 9 zuruckzusenden?

  

  Assuming that the file will be used in the free, not Adobe Reader, you cannot do so.

  You should consider only submit the form (FDF, the first option) data, however. It is a much smaller file, and you can import it into a copy of the form on your side to get a filled in the version of the file.