Bose Companion 5 pilot

Seriously, no Bose Companion 5 drivers for Windows 8 yet?  I have a game that comes out on February 19 and I not all sounds.  I get really upset if I have to go out and buy speakers.  Windows 8 has been out for some time now.  There should be drivers.  Is there an ETA on the release of the drivers?
 

Hi Gary,.

Thanks for posting your question in the Microsoft Community Forums.

I understand your concern about the compatibility of the Bose Companion 5 with Windows 8 driver.

Don't worry, we checked the Compatibility Center Windows 8 and this shows that the Bose Companion 5 is compatible with Windows 8. Check out the link:

Compatibility Windows 8 Center:

http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Bose%2BCompanion%2B5&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

If you have problems about Bose Companion I suggest you to contact Bose support.

The link: http://www.Bose.com/controller?URL=/customer_service/index.jsp

Hope the above information helps you resolve your query, if you have questions about Windows do not hesitate to post. I'll be happy to help you.

Thank you best regards &!

Tags: Windows

Similar Questions

  • Windows 7 and Bose Companion 5 speaker system lose sound intermittently.

    I use Windows 7 Ultimate RC, bought the version complete, simply have not yet installed.  I also use speakers Bose Companion 5.  Card mother Asus M3A79-T Deluxe and an AMD Phenom II processor.  My problem is this, my speakers work for a period of time, usually less than a day, then all of a sudden they'll stop working, is in the middle of playing World of Warcraft, viewing a video, whatever, all of a sudden they just stop working.  The speakers are still reported by default in the sound settings and remain are worth in the hardware Manager, I can unplug the USB and plug it back and he presents himself as the work, etc. but no sound until I restart the computer.  I do not use a hub and have tried different ports, please help.  I read around other people have problems with the function of ' cool n quiet AMD acting, but mine is disabled by default in the bios and I also ran the AMD power monitor, the two have no effect, I always lose her completely and randomly.

    None of this works... the problem still exists.  I thought I had resolved in the power settings... If you go to advanced there is a place to turn off USB, select suspend settings, it worked for 3 days this time before deciding to just turns off again.  Anything that you can do to watch it all would be appreciated.

    You encounter a driver problem, and the only real solution is a driver of his best. You should keep control of driver updates, if you want to use the devuice in Windows 7.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • My Bose Companion 5 cut automatically after 5 minutes

    original title: I need help with my Bose companion 5

    Hi, I need help please. While wacting movies or listen to music the bose companion 5 just past himself to cut every 5-10 min or so, the system is only 2 days, how it works? If not how can I solve this problem

    Hello

    The question you posted would be better suited to support BOSE. Check out the link and ask the question.

    http://worldwide.Bose.com/ProductSupport/en_US/Web/home/page.html

  • Bose Companion 2 multimedia speakers

    Hello:

    I have Bose Companion 2 pregnant media supplied with my Dell desktop computer I bought in 2009. My speakers worked perfectly until this past Sunday when all of a sudden the volume on the speakers went from 100% to 40%.  I checked all connections, but also check the volume on the Realtek Audio Manager and everything is in order.  I even tested the volume on the speakers and volume works but not at a level of 100% of its capacity.

    Is this reduction in sudden volume due to old age on the speakers, since I've had them since 2009?  Is keep your cell phone near the speakers destroyed them?  I ordered from another pair of identical speakers.

    Thank you

    NYCityGirl

    Hi NYCityGirl,

    Cell phones use electromagnetic fields to transmit and receive calls that interact with normal speakers however keep the phone near the speakers will not damage the speaker. In this case the failure of the president might just be due to its use as you might have guessed.

  • IDT High Definition Audio Codex.

    Get the message "this device cannot start (code 10)".  I tried Windows Troubleshooting.  I'm no sound from my speakers (Bose Companion 2 series).  I think I deleted something I should not have under "programs".

    Hi goreydog,

    The Code 10 error code is generated when the Device Manager has not enough information or the error that is upward by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    See the link below: errors Code 10 Description that generates the Device Manager in Windows computers:http://support.microsoft.com/kb/943104

    You can also run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/gp/no_sound

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP a110z-251 HP: my pc HP 251-a110z has internal speakers?

    I can't hear any sound - if I plug headphones I hear.
    If I use a USB bluetooth and use my earpiece to my android phone, it works - but the microphone does not work.

    But without either of the above, I cannot hear any sound. This pc is no internal speakers?  I hope someone can tell me, I am at a loss

    Thank you!
    Susan

    Thank you for the additional information.

    No, there are no speakers built into the monitor.  You can buy external speakers.  I highly recommend watching the USB speakers.  The connection to your computer via a USB port.  My next speaker with being pregnant BOSE Companion 5.  They are expensive, but you don't need a sound card.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Can I add a sound card on my HP Pavilion 9180f?

    I would like to add a sound card for my HP Pavilion 9180f desktop PC, but he said I need to know if I have a PCI slot or something else.

    Can someone please? I use Windows Vista 64 bit & Bose Companion 5 speakers are registered.

    If your PC is a motherboard e9180f has:

    Two graphics PCI Express 2.0 x 16 (for graphics cards)

    A PCI Express x 4 card (for cards such as network, sound, tv tuner)

    ) A card PCI Express x 1 (for cards such as network, sound, tv tuner)

    If your PC is a m9180f your motherboard has:

    1 PCI x 16 graphics card slot

    2 PCI x 1 slots

    1 PCI slot

    The slots PCI Express x 4 and x 1 are your best option for the sound card.

     
  • Add external speakers

    I have a HP all-in-one 200qd series (200-5380qd). Embedded speakers comes with the system, but I want to add external speakers and a subwoofer. I can't locate the appropriate ports. Can it be done?

    Thank you.

    SmallBizMD, welcome to the forum.

    This is the page for Specifications of the motherboard of the computer.  It seems that the only Audio output port only supports two channels.  You can find this information in the section titled "rear i/o Ports.  I suggest watching the Bose Companion 5 speaker system.  They are a bit expensive, but they connect to a USB 2.0 on your computer.  They do not require a sound card.  This will be my next computer speakers.  They sound very good and do not use a lot of space on your desktop.

    If your problem is solved, please click "accept as a Solution.

  • My computer does not recognize my speakers...

    I have a desktop Pavilion with Windows 7.

    Several months ago, I bought a speakers 'Bose Companion 5' system, which is compatible with Windows 7. It worked beautifully until about four weeks when all of a sudden the computer decides that she does not recognize the Bose speakers. After trying several times to fix the problem, I just unplugged the speakers.

    Then, a few weeks ago, I took a chance and reconnect the computer and heckling speakers! It worked!

    Well, long story short, when I logged on to the computer at night last Windows made one of their 'critical updates'. After that my computer was freezing every few minutes and my new speakers Bose were not recognized by computer!

    I did a system restore, but I had to restore it to a date where the speakers weren't working. And of course, they are not recognized.

    It drives me crazy! There is absolutely no reason that my computer recognizes no not my speakers!

    I wonder if the problem is with the USB port and if it is, does that mean that the ports will all fail?

    Can someone help me here please? I am so tired of fighting with the computer!

    I'd appreciate any help I can get.

    Thank you for hearing me.

    Niam, welcome to the forum.

    I'm jealous of your speakers.  In my opinion, they are among the best.

    Have you tried plugged into every USB port on the computer?  Sometimes it will work and another will not.  Also, have you looked at the "Control Panel / Device Manager / Universal Bus USB controllers" to make sure that they are all recognized and there is no yellow exclamation through them?

    For future use, when the application for aid, you must always include the brand / model of the computer or the monitor. This information is necessary for us to review the specifications for them.

  • H8 - 1237c need diagram of Audio inputs

    Hello: Where can I find a diagram of the audio sockets (entries) on the back of the computer and an explanation of what they do exactly? I also need a new speaker system, any recommendation would be most appreciated! Thank you very much

    Steve in Kansas

    Steve, welcome to the forum.

    This is the page for Specifications of the motherboard of the computer.  Scroll to the I/O ports/rear section of i/o ports to the list of ports and what they do.

    There are many good speaker systems, but in my opinion the Bose Companion 5 system is the best.  While it is expensive, you don't have to buy a sound card to make their great sound.  They connect to your system via a USB port.  Integrated sound will not simply allow good speakers to reach their full potential.  If Bose is too expensive, here is a pair of Logitech speakers who have a lot of good reviews.  Read the reviews to see what the owners have to say about them.

    If your problem is solved, please click "accept as a Solution.

  • XPS 8700 - adjust the bass and treble?

    Running Windows 10, with 'Audio Dell' (it is what it is called in the settings) and Bose Companion 2 speakers.  In earlier versions of Windows and in fact back to BACK 3.11, I was always able to locate a "sound engineer", where the high and low levels can be set.  For this system, nothing in the Device Manager or settings seems to give me this option.  Y at - it some trail adjustment that I am on, or is there some cool freeware that can fill the void?

    Thank you!

    * Reinstall the Chipset drivers Windows specific, 10. Restart after each one
    XPS - 8700_Chipset_Driver_CR5PJ_WN32_10.1.1.7_A00. EXE
    XPS - 8700_Chipset_Driver_VJ54R_WN32_11.0.0.1153_A00. EXE
    * Reinstall the Realtek Audio driver specific for Windows 10. Reboot when finished
    XPS - 8700_Audio_Driver_MN0T2_WN32_6.0.1.7525_A00. EXE

  • Problems with Dell XPS 435 sound

    Hello:

    I have a DELL XPS Studio desktop purchased in 2009 with Vista 64-bit OS. Until 3 days ago, the speakers on my computer worked. These are the original speakers that came with my BOSE Companion 2 multimedia pregnant computer. Initially, the sound was 100%, now it is suddenly down to 40%. I upgraded the speakers Bose one another and I will always have the same problem, my sound quality is reduced from 100 to 40%.

    I checked all sound card drivers and they are up-to-date, I also checked the sound Manager file, and it is also in order. I also did a "sound test" and I can hear the sound on the left & right speakers, the problem is that when I tried to listen to music or listen to video online I hear a very low noise coming out of two speakers, almost like a whisper.

    Can someone give me some tips fix - it.

    Silent in NYCABE

    Hi Nathalie:

    Thanks for your recommendation, I installed several audio drivers which have been recommended on the Dell Diagnostics page, but this has not resolved my problem of sound.  I think I probably need a new sound, in addition to the other parties. My computer is going on 4 years, his begins to fall apart, that I recently bought a replacement.

  • Several SndTAudio playback devices

    I run Vista Ultimate, 32-bit MS.  There are 16 instances of SndTAudio listed as playback device in Control Panel, sounds.  All of them are disabled.  The driver tab indicates that the driver provider is SndTAudio, 4\4\2008, V. 6.1.10102.333, signed by "multimedia private authority".  The Device Manager shows an entry for SndTAudio.  Under driver file details, he lists the following drivers in the windows\system32\drivers: drmk.sys, LVUSBSta.sys, portcls.sys and SndTAudio.sys.   I use a Bose Companion 5 sound system.

    What is SndTAudio used for and why is there 16 reading entries in the Control Panel, sounds.  Can I delete these since they are all disabled, anyway?

    Hi curt1943,

    Thank you for visiting Windows Vista Microsoft answers forum.

    The SndTAudio.sys file is not a system file. Probably, those are disabled and disconnected device listed in playback devices. To prevent these disabled/disconnected display devices, you can right-click the empty space in the reading devices and uncheck show disabled/disconnected devices.

    Also, I will suggest you to run a scan for viruses online on the computer.

    You can run the full Service scan of: http://onecare.live.com/site/en-us/default.htm

    Please let us know if it helps.

    Thank you and best regards,
    David

  • No sound on video with win 7 pro

    Win 7 pro played sound in the videos for a while, he STOPPED! I did as much as I do. Checked for mute, checked the performance evaluation report, checked the event logs, checked for obvious dll conflicts, checked the recent applications loaded and read the newspaper in the performance evaluation. The sound comes in a video for a few seconds, then stops. ALL system sounds stop. Only a reboot will bring the sounds and they will stop when a video is viewed. Sound does not work in media player for cd this happens in Explorer and Google. My voice from screaming at the computer - that did not really work! One last thing the speakers are Bose USB and don't need you the internal Realtec card to work. Bose speakers when tests show they are working but no sound!

    See if the audio troubleshooting detects problems when the fault happens - http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter

    If there are any drivers associated with USB speakers, to update with the latest supported versions from manufacturers web site (if you have not already done).

    Theres a similar sounding long posts here - http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/windows-7-and-bose-companion-5-speaker-system/6d913c21-4a4d-4a0c-ac08-5d4c83124e3f?page=8&tm=1410974261287 which can give some clues, if the above does not help.

  • Monitor - required device and multi Track Record

    I would like to

    1 drag a track on the track into the hearing.

    2 arm track 2 to save.

    3. the voice on track 2.

    4. finish with a voice on track 2, which is in the context of music on track 1 - so I can then manually mix the two stalking after the words.

    It's just if I can follow the track and therefore the voice I hear the track. In a studio as appropriate.

    Currently I run

    1 x IMAC

    1 x EPM900 table Soundcraft mixer connected via the outputs to the IMAC

    1 x Neuman which is connected to the fade an XLR on the mixer

    1 x two mini phono for a single entry mini on the IMAC of entry decision.

    1 x Bose Companion 2 (exit IMAC directly to Bose)

    I can now record in the IMAC and here myself through the headphones into the mixer - play recording by the companions of Bose.

    I guess I have to introduce path 1 to mixer so I can hear the track and voice mix at the same time right?

    So I need a straight audio interface? If so - what kind, £150 is very good.

    Don't know how I make the mixture in my headphones, I guess I could pre fade 1 9 track (i.e. my music) as a hack or just open the fader... oh I'm confused. Even better if you can make 1, 2, 3 for me

    Any help to achieve this would be very useful.

    Well, I couldn't find the 900 EPM on the Soundcraft site... just the 08/06/12 EPM.  Depending on how the EPM900 differs from those I found, there might be a way to make your follow-up help to send on the mixer - bring the computer in the mixer, set the pre melted, increase departures on both the mic and computer chains, but only reveal the fader for the microphone you save.  If you can monitor the departures to the helmet, it would basically make you want.

    However, I would probably recommend you go even when on the road of the audio interface.  Audio integrated on computers are notoriously bad quality (Yes, even Macs), so more convenience you would also get much less noise and a lot more.

    In your price range are quite a few models.  I can personally recommend the Alesis iO2 - I have one that I use for simple location records during the use not my big digital mixing console.  The iO2 goes for about $100 in most USA providers.

    If you want to look at the others, the only feature you want to look for is followed directly.  This will allow you to monitor your microphone without the latency that occurs to send your voice on a round trip via your computer and DAW.

Maybe you are looking for

  • Shoot the setting T4i screen / 650 d

    I'm having a problem with the screen settings to shoot.  That the screen flashes only once when the unit is turned on.  The ISO, AV, Q, WB, AF setting screen, etc... do not come either.  Menu, review of photo and information screens screen made it up

  • built-in photo editor called (photos) does not. It says "cannot load data.» Check your connection.

    Can someone please help, when I click on a photo to change and I chose the second Editor (photos), that it loads a bit, but then he said can not load data, check your connection. But it used to work before! and I am connected to wifi!

  • JDE4.5\bin has sigtool.set of the file what to do?

    Hello I installed 4.5 JDE and want sign the code. I don't see the files sigtool.db and sigtool.csk. What should do? Please advice asap. Also, I am only customer-CPR - xxxxxxxxxx.csi file to support BB after the application of key signing, what to do

  • Resolution of sketch in Illustrator

    Hi guys,.I love working with sketches, but when I import the file into a file the resolution illustrator is poor. It would be ok for web design, but it doesn't resist to printing needs.Clues? Can I export the sketch as a .svg?Thanks in advance - Jon

  • maximum bandwidth of vmotion

    What is the bandwidth maximum vmotion to move virtual machines?