Botting SAN

Similar Questions

• Google shows my weather situation as San Francisco.

  I live in Buckingham (Dallas).  I don't know how this change in San Francisco.  It has just shown one day a couple of weeks and the system won't let me come back to my correct location for the weather.  Called Apple Support and no help.  Referred me to the Weather Channel, but so far, did not get anything else than voice mail.  What happened and how do I get my time back to Buckingham (Dallas)?  I have a Time Machine backup but am wary to try this first.

  Have you checked the Date and time preferences?

• Prevent my bot console opening of more than 20 Firefox tabs

  Then I made a bot that can open a list of tabs in a Web site, but to about 20 pills they stop opening and start-up of firefox, blocking them as pop-ups, even if I have it set to allow them. Any ideas how I can fix this problem?

  How to run a bot to console? Is it a script injected into the Web site?

  You can try to increase the following value to see if it's the applicable limitation. Note that it is global and it would apply to the normal site scripts, too.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste pop and make a pause so that the list is filtered

  (3) double-click the preference dom.popup_maximum and enter your preferred value. Maybe try 40 first and see if it's enough.

• Following the upgrade to 34.0.5, I can access is no longer our SAN, airco, vSphere customers Web web pages, etc. How can I fix this?

  After upgrade to 34.05, can no longer access the web pages of the SAN, the air conditioning system, vSphere Client Web management interface, etc. All still work in Chrome.

  The air conditioning system gives an error:

     Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
     Advanced info: ssl_error_no_cypher_overlap
  

  The management interface SAN and vSphere customers Web display an empty page. Not sure if they have problems due to SSLv3.

  I understand that you want to be careful, but I seriously doubt that I have to deal with an attack of our SAN. Please, at least give us an option for you connect without worrying.

  Unfortunately, it is not possible so set this preference selectively - with preferences of internal firefox mentioned previously, you can only enable or disable the low globally.

• How can I tell if my IMac 27 is a network of BOT?

  How can I tell if my IMac 27, using Yosemite is a BOT network / it starts only in the middle of the night.

  Have you tried to resolve your power management settings?

  Apple menu > System Preferences > energy saver

  If checked, uncheck the NAP.

  If checked, uncheck the trampled for network activity

  Click on the forward button

  If the startup is checked, a check.

  If not checked, you can do a reset the NVRAM.

• I would like to install firefox on my mobile of San Francisco - can I do this?

  My Orange San Francisco mobile is unlocked to 3UK and I would run firefox on it.

  It is a phone ARMv6. Mobile Firefox requires a phone that has an ARMv7 support. We investigate adding ARMv6 support if there is no concrete timetable for this work.

• User's home drive do not disconnect on logout - El Cap / SAN / SMB

  10.10.5 managed Server 5.1 customers / 10.11.4 Server and the Profile Manager

  We have recently moved to a new SAN.  Our old SAN (CEM) used to go nuts if we have enabled SMB 2 when connecting with our Macs.  We forced protocol SMB 1 on our customers and this stopped file corruption and the SAN to bananas.

  New SAN (ch) supports SMB 3.  Migrate all user data and found that funny permissions files Mac (movies, music, photos, library etc.).  The "Everyone" group was set to 'Deny' and either remove it, or just refresh perms on a folder that has allowed the correct users access.

  When you use SMB 1 on our new SAN, it was slow as dirt, so we have enabled SMB 3.  Much faster.  Our problems are the following:

  1 - when a new user is created, and they connect for the first time, they get their 'Mac' folders created.  They are made with the funny perms that prevent users who register in these files.  We got around this new users by creating a template for folder for them BEFORE opening of session that contains the correct permissions.  Store us existing users running a monster script to strip and update perms.

  2. when a user logs on to a Mac client in network, their network folder does not disconnect properly, leaving open which means if they connect to another machine their Keychain can go nuts.

  Everyone here has experience with Macs and WITHOUT and dubious permissions?

  Bosco1983 wrote:

  1 - when a new user is created, and they connect for the first time, they get their 'Mac' folders created.  They are made with the funny perms that prevent users who register in these files.  We got around this new users by creating a template for folder for them BEFORE opening of session that contains the correct permissions.  Store us existing users running a monster script to strip and update perms.

  Roughly permissions must be that the owner can access the files and content, but everyone should be declined. As long as the user creates the folder, they should the registered owner.

  Bosco1983 wrote:

  2. when a user logs on to a Mac client in network, their network folder does not disconnect properly, leaving open which means if they connect to another machine their Keychain can go nuts.

  Yes unfortunately network directories have a lot of questions. This is something that I and others have seen as well as various other issues. I have I feel resolved this by putting in place a logouthook script that takes place as his name when the user disconnects, and checks and if necessary disconnects all left to mount the users home directory. Here's my logouthook script.

  #!/bin/bash
  # Kill secd processes left running after user logs out
  killall -9 secinitd
  killall -9 secd
  logger "LogoutHook killed processes"
  # Unmount network home directory share if left mounted after user logs out
  mountpath=`mount | grep /Network | awk '{print $3}'`
  if [ "$mountpath" != "" ]
  then
    umount -f $mountpath
    logger "LogoutHook unmounted network home"
  fi
  # Delete old stuff from /private/var/folders - mainly cache files after user logs out
  # more as a security measure but also helps clear any bad stuff
  find /private/var/folders/* -type d -mtime 1 -exec rm -rf {} \;
  exit
  

• How to remove a bot certified Skype to a group conversation?

  Hello. I'm having a few problems remove a Skype Certified bot a group convo. Jessie Humani to be more exact.

  I can't find a single button for it, nor can I use the command/kick or /kickban, since these commands need I enter a username, and these types of bots don't seem to have a user name.

  Anything that can kick or remove a bot of a group conversation?

  Discovered how A.
  First, you must be an administrator for the conversation.
  The bots actually have usernames, but they are not obvious.
  Type /showmembers in the discussion group and it should appear.
  Copy & paste the username and then use it with the/kick command.

• Master of Trivia bot

  Hello I was wondering how to play the quiz master bot game that I tried and when I type the start as it says told me what subjects he is Professor of but he then sends me something that sends me on skype.com and looks as if asking to download me Skype, but I already have Skype. How to play the quiz master bot game?

  Thank you for any response.

  I don't know how to mark this resolved, but I have now solved this problem I googled the latest version of Skype which came 7.26.85.101 so I looked at my on Skype and I noticed it showed that I had version 7.25 so I uninstalled version and then to the down loaded 7.26.85.101 version and then I was able to play trivia bot master.

• error while sending IM Mitsuku bot

  error: {}
  "status": "error", he said.
  "message": "the request is incorrect.
  }

  I get this error when I send an instant message to bot mitsuku any idead on how to solve this problem? Thank you very much!

  Initially, she said: "WARNING: unknown user: Skype-skypeuser-user-90489.
  and each message after it has been followed by the one you posted. Strange. I'm registered and everything. Tried it on my phone and the PC, so I guess it's the fault of Mistuku ~.

• Skype bot knew my personal data?

  I added what I thought, it was a bot of Skype, and me being the funny person I am I thought it would be funny to talk with her and say stupid things and send the same and so now when he spoke to me, but then I sent a photo of a runescape game in npc and he responded with '' I love runescape '' I was sure it was a bot until there , but I'm still very curious. I sent a few more images to see what he would say, and she continues to meet with "wow, you're hot" and things in this sense. And then I sent a picture of my friend on crutches and he replied 'I'm sorry for people like that' and I started to worry because as far as I know, bots can't identify the images, and then he asked if I was at school and I said of course, 'I am' and told to stop talking to me and he replies 'I like young teens' after that , I locked it and now I'm worried. the name was "xhotty23".<3" and="" it="" kept="" telling="" me="" it's="" name="" was="" amanda="" and="" they="" were="" 24="" years="" old.="" it="" told="" me="" to="" go="" on="" a="" website="" called="">
  Someone urgently help me.

  Update on this...
  Got pranked by a friend lmao

• SanLink2 and Dell Compellent SAN?

  Hello world

  I'm currently developing a sharing of the AFP on a Mac Mini with our Dell's Compellent SAN fibre channel storage.

  I have a late 2014 Mac Mini connected through love at first sight for a SanLink2 adapter CF 16 G.  The adapter has two HBA that is connected to our Cisco MDS 9148 fibre channel fabric switches.  The WWPN of the HBA on the adapter have been the subject of a zoning on the fabric buttons, and we cannot FCPING SAN HBA successfully.

  However, we have 2 TB of storage of our Compellent SAN to Dell for the mac mini, and I can't get the mac mini to see volume (do not see it in disk utility and can not see all the new drives in / dev).  I have a support case to open with promise, but he was curious to know if the community had seen.

  I tried fell different cable, different fibers and several reboots.  In my research on Google, I've learned a fun terminal command under OS X: fibreconfig-l [it's a lowercase L].  When I run this command, all I get is the following:

  terminalprompt # fibreconfig-l

  Controllers of

  Targets

  NodeWWN 23:00:00:01:55:5 B: 29:08

  NodeWWN 23:00:00:01:55:5 B: 29:08

  In my monitor OS X system, under the section of Fibre Channel, I get a little more information, but I'm under the impression that I should see (s) Lun in there and I'm not.  Here's what I see:

  Seller: promise

  Product: SANLINK 2

  Review: Firmware 1.1.65.30 material b

  Initiator identifier: 3791655135

  Node World Wide name: 23:00:00:01:55:5 B: 29:08

  Port World Wide name: 24:02:00:01:55:5 B: 29:08

  Address identifier: AE:16:00

  Description: Port 1

  Speed: 4 Gigabit ports

  Topology: Auto (point to point)

  Status: Connection established

  Cable type: optical fiber

  I can provide more information if necessary.  Thanks in advance if anyone has any ideas!

  Hello

  I know some FC HBA require that either a device mapped to LUN 0. For these HBAS if there is no mapped to LUNS 0 none of the storage will be recognized by the client. It has been my experience that whatever it is based on the older chipset of the LSI FC has this problem. The original SanLink FC HBA has no need of any drivers that was also the case for Apple brand LSI FC HBA OSX - thus could perhaps use the some of the previous control logic? Additionally, make sure that you are properly set up as point to point or FC - AL topology in the SANLink 2 configuration utility - this should match what is your San.

  Try this:

  1) map to the storage presented to the Mac with 2 SanLink to LUN 0

  (2) check the topology setting (try it was taking off from point to point auto and try first)

  (3) check if there is of"security groups" on storage that there ID WWN of the SANLink2 registered

  (4) make sure that the storage and the Mac are zoned properly on the FC switch (could be WWN zoning or rezoning of port, in both cases, it must be set up correctly).

  I hope this helps!

  -Jonathon Lee

• Antenna Apple TV screensaver is blocked on San Francisco

  Air screen saver works normally except what happens in San Francisco every time. It was working fine until about two or three weeks.

  Unfortunately there is no way to control what screensaver air rises, outside setting when new are downloaded

  You can give your comments

  http://www.Apple.com/feedback/

• Appreciate direction correct forum, as if to suggest an emoji Aladdin Sane if necessary

  I would suggest the creation of an emoji Aladdin Sane, if appropriate?

  Tintinrocks wrote:

  I would suggest the creation of an emoji Aladdin Sane, if appropriate?

  Sorry, apple is not responsible for the manufacturing of emoji.

  Using google and you will know that, then you can let them know.

• Migration of data from records on Win2K8 cluster to a new SAN SAN

  I hope that someone here might have a clear answer to my question. We are currently working on a project to migrate all the data of a former SAN that stores our info Win2K8 Cluster (Quorum, MSDTC and SQL DBs) to a new SAN. I know that databases SQL, the plan is to simply detach the DBs with in SQL, stop SQL services, move the DBs from the old drive to the new location and then reconnect, we intend to reuse the drive letter, so that there will be real problems.

  What I'm having a hard time trying to figure out, is how to move successfully the readers of the page Web MSDTC and Quorum, would I simply create a new set and removing the current Quorum and MSDTC leads or is there a way to move the data on the page Web MSDTC and the Quorum of the current location reuse the old drive letters and stored it on the new San without having to change any configuration or break the cluster.

  All clearification would be much help.

  Thank you.

  Hi Vince,.

  This problem would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Thank you.