Bottom line keys Lenovo T430 does not

Similar Questions

• 'Lines' of the table does not automatically extend as added content?

  This is a table of Storyboard, built with a simple table.  Three columns: one for the images, one as a spacer, a text.

  I did the storyboard to the origin in the Pages, and then converted in Word to work with a partner, now converted to Pages yet.  It seems to be OK except for one thing:

  Before, when I would write in the text of the text column... the line would extend automatically as the text was written, at least in the size of a page.

  Now, I think lines are somehow "locked" and does not (at least one page), extend this text and images, are "hiding" because the line is not normally develop as she would have.

  Is there some click preferably a place that keeps my lines to a constant size, any content is in every cell?

  Or maybe it's a corruption caused by going to Word and back?

  All ears,

  Ben

  V4.3 Pages ' 09, or permit Pages v5.6.2 splitting a line beyond the limits of the page, so limit the content of text in a cell a to a single page. I just copy and paste a page full of text and he dropped in the first row, cell 3. It is automatically extended to the bottom of the page and not details. There is no hidden settings in Pages that will be substituted for this limitation.

• Menu key FN bar does not appear on Satellite R

  PROB-1: I bought this tour before 4 months... All of a sudden my FN key does not work... that is, if I press the FN key menu bar not POP OUT, but if I touch FN and press F7 or F6, the brightness of the screen changes.
  I got this in Saudi Arabia, the key Board also have Arabic fonts (which I really don't want to).

  PROB-2: if I want to type "@", I have to Shift + tap on ""rather than"" Shift + 2 ".

  pls help on these...

  Hello

  Problem 1:
  The FN key line that appears at the top of the screen is Support of Flash Card Utility controller.
  Select all programs-> Toshiba-> Flash cards and restart the software.
  If this does not work, reinstall this tool.

  Prob2:
  I guess you the keyboard language setting does not match the keyboard layout.
  Just change the keyboard language setting.
  I guess you have to change it in English (United States)

  Welcome them

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• Multimedia keys of LED does not

  I tried to click on my media keys of LED, but it does not work... supposedly, when I click on my movies main power media will come out but now it won't... I try to search in google on how to configure the multimedia keys LED... He told me to press the FN key... I tried to click FN... But nothing seems to happen... I use toshiba satellite A300...

  Hello

  Did you change your computer?

  (a) turn on your Toshiba Satellite laptop.

  (b) press the "Fn" key on your laptop keyboard, which should set up a line of icons at the top of your screen.

  (c) use the arrow of your keyboard and the 'Enter' keys or your touchpad to select the icon that has a silhouette of a person inside.

  (d) select the icon "settings". Although it is not labeled 'Settings' by name, it will be the icon at the far right of the screen that looks like an audio equalizer, four columns with sliders.

  (e) use the touchpad of your laptop Toshiba Satellite to select the list for the media playback button that you want to reassign.

  (f) label your media new button function by typing a descriptive word or phrase in the box "Description." Then, copy the location (see 'tips') of the program you want the media button to open the box of "path of the target.

  (g) press 'Save' to configure this media button based on your new settings

  I suggest you contact the computer manufacturing and check.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Key FN + F8 does not not on Satellite M300 after system rebuild

  I recently (after a problem with a regular update of the XP) had to rebuild my M300 Sat because I had no order form setup that I fear, I made a mistake and installed the drivers of chip set too late.
  The process stopped at 90% and the system needed a hard reboot. After that everything seems OK, work with one exception about (so far):
  the FN F8 keyboard shortcut does not work.

  My questions:
  y is there a way to check the problem with this shortcut key and can it be repaired even with my a bit messy installtion order?
  -can, in some so, fix the mistakes I made with the order of installation for the chipset guide when the full 100%?

  Hope someone has some advice.

  Thanks in advance.

  Try the Wireless Hotkey driver from the Web from Toshiba site

• Function key the brightness does not

  Hi dude!

  HP 15-D009TU model

  Windows OS 8.1

  The brightness key function does not work. But the other function keys do not work correctly

  Can you please give me the solution to the problem resolver thi.

  Thank you

  Sekar!

  Hello

  Try reinstalling your driver of Intel HD graphics on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64376.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Lenovo y480 does not connect to wifi

  I've had my y480 (renovated) Lenovo for about a week now and it connected to my wifi without problem the first days. Then last night it suddenly lost internet connection and has not received this morning either. I rebooted several times. All of my other "gadgets" / laptops get the connection. This one seems to find my router for a second, give me internet for a second, then don't say 'no internet connection' and then finally say that it does not find my wifi connection.

  Don't know what to try.

  Thank you

  Casey

  After that I went out for a few hours, I came back and my power went out in my apartment. Now, everything seems to work again.

  I'm confused because I tried to reset the router once.

  It is unusual to have one computer accepts not WiFi sometimes? I have not experienced this with my other computers. I want to just make sure that the problem is not something to be feared that the system is refurbished.

  Thank you very much!

• Lenovo G500 does not start

  Hello

  How are you? I am new to the community.

  I am facing a problem with my laptop Lenovo G 500. The memory is as follows:

  When it is plugged in, the battery light is on (white color). But when I press the power on button/recover button, the power led starts for a second and then the two LED lights (power and battery) turns off. The screen blinks but turns off immediately.

  I tried to unplug the power cord and took out the battery and then you press the Start button for 30 seconds and then reinstalled battery and plugged the power cord. But the same thing happens again.

  Addiitonal Info:

  -The fan does not work

  -CD ROM will not open

  What should I do? Thanks for help.

  concerning

  Ravi

  It looks like a hardware problem that will require a tech to study. I advise you to contact the Lenovo Support by phone to discuss the repairs under warranty.

  Good luck.

  CB

• Lenovo Z585 does not start on a DVD - jump directly to Windows

  Hello, I just got a new IdeaPad Z585 from newegg, and I can't figure out how to boot from a disk in the drawer of the DVD.

  I tried to open the BIOS and change the boot order, as well as simply go directly to the start menu. I tried with UEFI both active and disabled, as well as Secure Boot both enabled and disabled. No matter what I try, it does not start in any DVD.

  I try to install Linux and tried different discs and distributions of this. When no even reached GRUB, I tried a Windows 7 installation disc, and even that is ignored.

  What should I do?

  Hello
  The secureboot and uefi must be handicapped simaltaneously. You can try if you haven't.
  Also, could you try pressing the novo button to power your laptop. The novo button is the button of reocovery key a small next to the power button. Has then access Startup menu see if it helps.
  Concerning

• Lenovo Y400 does not start correctly

  I bought a Y400 Ideapad in January 2013 and over time, the number of times where I had some random restarts or inability to properly start has increased. For the startup problem I press the power button and I hear the sound of the computer turn on but the screen does not turn on and does nothing. This can continue for many tests until it actually reaches the login screen. Sometimes I spam F8 or F1, just to be able to get to the startup Lenovo screen, but then it does that press the buttons are supposed to do.

  I called support and the last time I called they think that its a few horses of Trojan or virus and they say that the only help they can give me is some service $200 where they call a technician to come look at my laptop. After that call I ran things like AVAST, Malwarebytes and Super AntiSpyware Combofix without result. I used the One Touch recovery to restore the original configuration, and I still have this problem.

  I don't know what to do anymore.

  Hi sdy007,

  Yep

  According to the explanations here on the forums of Neokenchi

  "Calibration retry count is the number of times that the HARD drive has initialized (the head alignment and tracks) when the computer is turned on and it took 91 times to calibrate beaches head to HARD drive - this may seem like an imminent HARD drive failure.

  You can contact the Support technique Lenovo to get the HARD drive replaced it should be covered, you can ask them on your options on getting to this fact.

  http://support.Lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613

  At the same time have your saved data if possible.

  Concerning

  Solid Cruver

• HP Pavilion F6 / Mute key Light-Now does not?

  Hello

  A little over a week ago, I went out and bought a HP Pavilion 15 laptop-e092ea.

  It's a brilliant machine and I'm really happy with it, but there is just one small thing that has popped up.

  I'm sure many of you know, Pavilion series laptops have a mute very practice that serves to the F6 key. This key is a small LED that lights up when you press on to show that the computer is cut.  Until yesterday that the light was working fine until something came on the screen mentioning an update of the BIOS. I went ahead with the update and everything seemed fine. I then discovered that the LED was not lit when I used the key to turn off the computer.

  I tried to reinstall the audio drivers and restart the computer several times after reading some information on the forums, but nothing works. The key still works perfectly, but given that the computer is fairly new, I just fix the problem. I would take it to a repair place, but it is too small and the pricing is not fair in the slightest.

  The lights of the Caps Lock, button / stop and led for Mode without wire/flight work, it's just that touch Mute, that does not illuminate. As I said, this is a minor thing but I would be nice just to have working again.

  I am running Windows 8.1 if it's of any help.

  Anyone know how I can fix this problem? The update of the BIOS could affect it at all?

  Thanks to all those who can help you.

  Thanks for your reply.

  In fact, I managed to get the light works again after reinstallation of an audio driver using HP Recovery Manager.

  I tried to reinstall the driver using the Windows Device Manager, but it had not worked.

  As soon as I used the Recovery Manager when amber was light once more.

  Thanks for your help.

• HP envy 15 key 'fn' 1066NR does not

  I bought a referbished envy 15 1066NR delivered without an operating system. I installed Windows 7 and noticed that the 'fn' key did not work. I thought it was a driver problem, but now I have downloaded and installed all the drivers I can think.

  In the last few days that I have upgraded to Windows 8 and after many hours of work with video drivers, finally got the system is stable. All the old drivers I had installed Windows 7 are compatible and since it was an upgrade, settled automatically in Windows 8. I always have problems with the "fn".

  That's when my friend 'Google' has been used. I found that, in the bios settings, there is a way to activate the default fn keys (pressing the f11 key is f11 but mute). This setting has been activated (f11 = mute) and I turned it off (f11 = f11) but now the fn key still does not work.

  I know that the "f1 - f12" keys work with their assigned functions because when the above bios setting has been activated, I was able to use them, but not my f1-12 keys.

  I would like to activate my fn button. I think that it needs active and should be trivial, but I don't see how.

  Please help and thank you in advance,

  -bscholt22

  OK, so it sounds like the Fn key does nothing at all - just wanted to confirm that the toggling this setting did not produce a different result.

  So, it looks that the Fn did not work right out of the box, this exact key? In this case, if you bought it refurbished at HP, always be guaranteed on this subject and could get a repair - maybe it's that the keyboard is physically not working properly. If you bought the device, refurb, please contact them and see if they will honor any kind of warranty.

• Key wireless button does not

  I have a problem with the wireless button key. Does not. Is it possible to switch this button? Anti-piracy

  Hi Mark,

  Please contact technical support group of the manufacturer of your computer and/or forum with the specific brand, model and serial number or service of your computer code (phone, chat, email, articles, knowledge bases, guides the user manuals, forums, troubleshooting guidelines,...).

  It would have really helped to know the manufacturer, brand or specific model (not only the family of models but the exact model) of the computer that you're talking about (as well as the operating system.  Without that, I can only provide the following search options which are certainly generic but can help or you can modify as appropriate to better target your situation (including the specific computer model or something else):

  http://www.Bing.com/search?q=Wireless+Button+not+Working&QS=n&Form=QBRE&PQ=Wireless+Button+not+Working&SC=5-27&SP=-1&SK=

  http://www.bing.com/search?q=how+to+enable+wireless+button&form=O1FD2

  http://www.Bing.com/search?q=How+to+Bypass+Wireless+Button&QS=n&Form=QBRE&PQ=How+to+Bypass+Wireless+Button&SC=0-29&SP=-1&SK=

  Another option would be to check that the wireless works for other devices (the possibility that the problem is the router rather than on the computer) or with the laptop (so) at a kiosk computer to see if you can connect (which suggests a problem with the router or the configuration of your network as opposed to the computer or the button).

  You can also try to set up a new wireless connection on the computer and see if it works better.

  The out rule, I would update the networking and device manufacturer keyboard drivers to see if that solves the problem (and it may not hurt to get the updates anyway).

  I've never used a computer with a key/button, so I don't know where to look.  Instinctively, I would try to control panel / Device Manager to see if there are any problems detected it (red circles, triangles yellow, white points mark) and see if you can find the associated devices and confirm that they say they work very well without any problem, then check the network configuration and control center for options.

  I hope this helps.

  Good luck!

• New Lenovo A6000 does not

  I just got a new Lenovo A6000. I put a 3 G SIM to work in the slot (slot1) USIM card. However, the phone does not detect that and I move SIM not on turn on/off the phone.

  Under settings-> SIM card management, it says please enter the SIM card number. I tried to enter the SIM number printed on the SIM card but no luck. What number is supposed to be entered here?

  I also tried the same SIM in slot 2 (SIM / 2G). No luck.

  In addition, even though I configured and connected to the Wi - Fi network, I can't access any Web site through the browser and also no google applications connect. Is there a problem with the unit?

  I'm glad that the problem has been resolved.

  1. the phone detects no = Sim not detected. Guess its resolved now since its been the motive for data that was not enabled by default.

  2 WLAN is able to work with a different WLAN access point. I suggest that you set on a different channel on the affected WLAN access point.