bought the new iphone 6 s more and can't find a manual

Similar Questions

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• I bought a new iPhone 6 s more and told me to load for a long time I did let him charge for 25 hours. Is that going to affect my battery life and what happens if I use it immediately?

  I have a new iPhone, and told me to let it load for a long time. I let it charge for 25 hours. This can affect my life of bacteria? And what happens if I don't use the phone immediately?

  Not at all, you can leave it plugged into the power supply, and it won't hurt the battery. However I am not leaving the phone in a State discharged for a long time. That can hurt so when he approaches zero the load soon.

  This user tip can help: when to charge your iPhone or iPad

• Cannot pass through the screen of iTunes 'music' when you try to access my library on the new iPhone 6 sec more

  There's probably a simple answer here... but I can't get past the music screen so I can access my iTunes library.  The phone is brand new, and I thought I had done everything to implement.  Any ideas?

  Thank you.

  B

  Have you tried the settings > music > show Apple music > Off? If so, tap you my music in the lower left corner of the app music? If you have done these two, Force to restart the phone. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• I bought the new iphone 6 of jarir Bookstore Riyadh Saudi Arab when I insert my sim pakistan it doesn't work I check sim in another iphone 6 then it works.

  Pakistani sim does not not in Saudi Arabia

  If your iPhone is locked by a carrier, you must contact the carrier to unlock. Note that this is possible only when the contract has already been terminated and there is no charge to be paid

• DeskJet F4580: new router cannot get connection and can not find the whole upward on macbook

  I had to get a new router as I have had problems with my fixed internet internet problems but now my printer does not work unless I connect with the usb cable, I have tried everything including the abolition of the printer, which now, I deleted the setting up of information out of my macbook and can not install the printer please help it worked very well with my other router...

  Hey @gingerjean1,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have replaced your router and are having trouble with your Deskjet F4580 of connection to the network. I can help you with that.

  As you use Macintosh 10.7 I recommend the use of a Windows PC to install the printer on and then to add to your wireless network. If this isn't a practical option there are a number of things we could try.

  Apple Software Update

  1. Click on your Apple icon and go to software updates.
  2. Install the available updates.
  3. Apple's HP printer driversdownload.

  If during the installation there is no wireless options then:

  1. Go to your Apple system and print and Scan preferences icon.
  2. Double-click your printer icon on the left side of this screen.
  3. In the pop-up window, click on settings, utility, and then click Open Printer Utility.
  4. In this new window, you must have a wireless tab along the top, that you can click.
  5. On the left side, we are looking for a wireless configuration wizard.
  6. Run the Wireless Setup Wizard to add the printer to your wireless network.
  7. Once the printer is connected, disconnect the USB cable to the back of the printer.
  8. Return to the Apple, system, print, and Scan preferences.
  9. Click on the button "+" at the bottom left.
  10. In this window, select your printer.
  11. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  12. Click on Add.
  13. Try to print.

  Ad-Hoc

  If the method above does not allow you to connect the printer wireless, then it can work.

  1. Perform a factory reset the printer. I will include guidance on how to do so shortly in a private message.
  2. Turn on the printer.
  3. Press the button on the front of the printer wireless.
  4. Wait for about a minute.
  5. On your Mac or another wireless device, you should see a network with a name similar to "HP Deskjet F4500 XX Print" listed. To connect to this network.
  6. Press and hold the scan button (the icon of the printer under the red x on the printer) for 10 seconds. When you release the printer should print a test wireless report.
  7. On the device you connected to the printer, open a web browser and type the IP address in the bar of address exactly as shown on the test report.
  8. You should have a network tab along the top of this window.
  9. On the left side, we are looking for a wireless configuration wizard.
  10. When you run that must connect the printer to your wireless network.
  11. Once the printer is connected, disconnect the USB cable to the back of the printer.
  12. If you have connected your Mac to the printer above and then reconnect the printer to your wireless network now.
  13. Return to the Apple, system, print, and Scan preferences.
  14. Click on the button "+" at the bottom left.
  15. In this window, select your printer.
  16. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  17. Click on Add.
  18. Try to print.

  If it allows you to connect your printer to your wireless network and then do other forum users know clicking on accept as Solution below my post. Even if you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• Bought the new iPhone 6 and FaceTime doesn't work. How can I fix?

  I already looked for alternatives, but none of them work. I don't even have facetime in my settings. Help, please

  Where the phone was purchased?

  What is the model number to: settings - general - about us - model =?

• Random Activation on the new iPhone lock 7 more

  So, I bought an iPhone brand new 7 more on the program of upgrading my Apple apple local store and I left for a week before actually removing the seal plastic and using my iPhone. I opened today and tried setting up, however the activation step it kept showing me an activation failed message. So I decided to try and activate my iPhone via my computer by connecting and setting up this way. When I plugged and began the process of my iPhone 7 more suddenly went to the activation showing lock screen an iCloud I have never seen before you say that I must enter iCloud to use my phone. I did not understand how it had happened that the phone was brand new, I even proof of purchase from Apple etc. Anyone know how I can remove the lock? Or find out who it is? I called apple and they say that they will not be able to set for a few days, but I need my phone now and I was wondering if there is another method. I had a problem similar to this before that every time I try to retrieve backups iCloud my devices always show the iCloud random accounts I've ever seen to check my back.

  I would really appreciate help as I'm very angry about this, I understand not why should I pay that much for a phone every month if I'm unable to use it immediately. Please could someone help, thanks.

  I don't blame you for being upset, but you have to take the iPhone to your Apple Store and explain what is happening.

• Errors with the new Motorola Moto G4 more and WiFi not working not

  Hello, I got a brand new Motorola Moto more G4 64 GB phone two days ago, and since then, I have had several different problems.

  When I started my phone for the first time that I saw that there was an update (after initial installation) and I clicked to install the update and in the end, I received a message saying that the update failed, but I never got re - apply the update again and unfortunately I do not know what was in this update.

  Anyway, the first day I was able to connect to my WiFi at home, but since yesterday my WiFi setting is always off and when I try to tap on the button nothing happens. My phone is not even show the available WiFi connections, because the WiFi is completely turned off (as in airplane mode). When I try to turn on the WiFo then it immediately clicks back OFF - no message or whatever. I have tried several things but essentially decided to do a factory reset, and I also deleted the cache partition.

  After the reset, I get several errors now:

  'Unfortunately not stopped the user interface of the system.',

  "Unfortunately the retail Config Service was stopped.", etc.

  I did a clean reset several times and it happens every time. When I click on them away I can always configure my phone but the WiFi problem. Also after the reset, there is no update available, I found weird because it is the first time. My Android version is 6.0.1.

  Anyone know what to do? I feel that this phone is totally buggy and I would maybe return to Motorola if I can't fix it myself.

  dustinmoris wrote:

  Hello, I got a brand new Motorola Moto more G4 64 GB phone two days ago, and since then, I have had several different problems.

  When I started my phone for the first time that I saw that there was an update (after initial installation) and I clicked to install the update and in the end, I received a message saying that the update failed, but I never got re - apply the update again and unfortunately I do not know what was in this update.

  Anyway, the first day I was able to connect to my WiFi at home, but since yesterday my WiFi setting is always off and when I try to tap on the button nothing happens. My phone is not even show the available WiFi connections, because the WiFi is completely turned off (as in airplane mode). When I try to turn on the WiFo then it immediately clicks back OFF - no message or whatever. I have tried several things but essentially decided to do a factory reset, and I also deleted the cache partition.

  After the reset, I get several errors now:

  'Unfortunately not stopped the user interface of the system.',

  "Unfortunately the retail Config Service was stopped.", etc.

  I did a clean reset several times and it happens every time. When I click on them away I can always configure my phone but the WiFi problem. Also after the reset, there is no update available, I found weird because it is the first time. My Android version is 6.0.1.

  Anyone know what to do? I feel that this phone is totally buggy and I would maybe return to Motorola if I can't fix it myself.

  Hi dustinmoris,

  Sorry to hear that. Since you have already completed a factory data reset, repair indeed is necessary. But you mentioned that the phone is brand new and you received it just 2 days ago, you can go back to where you bought it so that they help you more.

  Kind regards

  Joy

  Motorola support

• iBooks crashing on the new iPhone 6 sec more

  I just upgraded from my iPhone 5S for a further 6 s. improved to 9.1, and everything is looking good EXECPT that iBooks leaves everytime I open a book and even when I'm looking at my list of books and have not yet selected a...

  Tests I've done:

  -force quit all applications

  -iBookstore vs home made (iBooks author) books

  -WiFi off

  -data cell iBooks out

  -Phone off then on again

  -Phone restarted

  -Downloaded a new book

  -Go straight to the store once launched the app

  Normally, my next step would be to remove the app and redownload, but iBooks is now installed with the operating system, there is no x to delete the application.

  The main reason that I went to the largest phone was because of the way that lots of reading I was doing on children 5 years old, so it is an important for me!

  Your thoughts of value...

  Hey Chris bolt,

  If I understand correctly, an application that is preinstalled on the OS crashes whenever you try to open it. Normally, we would like to uninstall and reinstall the application. Looks like you already have a troubleshooting. I recommend you to read this article, it may be able to help solve the problem.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Thank you for using communities of Apple Support.
  Have a good.

• I bought the new computer at best buy and they told me to contact microsoft to get my copy on windows 7, which shoul go?

  Ideas:

  Oblems withhadadfadsfasdfjadsfadsfladsfjlasdfj0aw9rjdf 90WWWW]

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Read the info on the 1st link below to see if your computer manufacturer is part of the free upgrade program for Windows 7.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

  Above Microsoft link has info for the Windows 7 upgrade Options from the various participating computer manufacturers.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

  FAQ about the upgrade is at the link above.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I've updated the cs6 camera raw and now cannot see the metadata of the camera I used to see and can't find it in photoshop itself.

  I updated the cs6 camera raw and now cannot see the metadata of the camera in the first I used to and do not at all see in photoshop.  This can be corrected?

  What operating system do you use?

  If your using a mac operating system

  http://helpx.Adobe.com/bridge/KB/ACR-84-bridge-CS6-metadata.html

• Hello to all I just upgraded for Iphone 6 seconds more and the 3D touch does not work on some things... What am I doing wrong?

  I just upgraded to the new Iphone 6 s more and tactile 3D on everything works expect applications on the home screen when I long press she made sure you

  can move the apps autour with x, but does not have the menu of dialogue that its supposed to come... what I do wrong... the 3D touch is enabled in settings so have no idea... anyone know thanks...

  What applications you try to press and hold on? To bring up the menu, you need to use more pressure. Simply hold down the icon with a light touch will make the icons wiggle with the X to remove the apps.

• Hi, I bought a new Iphone 6 s and made a backup of my old Iphone 5. The backup is visible in my new phone, but it is not clickable. Help someone?

  Hi, I bought a new Iphone 6 s and made a backup of my old Iphone 5. The backup is visible in my new phone, but it is not clickable. Help someone?

  Are you trying to access the backup during the initial installation or you have already install the new phone? If you already have the first installation, refer to the instructions below to transfer content from an iPhone, iPad or iPod touch to a new device - Apple Support

  To transfer a backup on a device, you have already configured, you need to clear the device: tap Settings > General > reset > erase all content and settings. This erases all the data that is currently on your device. After you erased, your device will restart and you will see the screen of 'Hello '. Now, you can transfer a backup of your device.

• Hi guys I have a bought a new iphone 6s more 16BG - model A1634, when I have this unpacking I found 'to '.

  Hi guys I have a bought a new iphone 6s more 16BG - model A1634,.

  When I have this unpacking I found "at & t" inside the sim card sim card try will would be possible to have the SIM on a new appliance?

  Is that I got a used phone? Help, please...

  Its fishy to me. I would definitely return. Where have you bought? If this isn't an Apple reseller, I'd be worried.