iPhone used 6 4 MB of data in 30 seconds

Similar Questions

• Given to replace my current iphone with a 6s - a trip that I can disable the use of boxes and use a unique sim card data for emails

  Given to replace my iphone today with a 6s - a trip that I can disable the use of boxes and use a sim card only data for email & web.

  If you go to settings > Mobile and less ' use of mobile data for: "turn off all except Safari and Mail

• Why my 6s Iphone says that I used 44,59 GB of data and documents when I don't have? Recently updated to iOS 9.2.1 and having problems.

  I bought the new 6 s iPhone with 64 GB of storage in December. A few days ago I updated to iOS 9.2.1 and I got a notification the next day saying that my storage was almost full. I was shocked because I have not yet used half of the 64 GB and before I upgraded to the latest updated everything worked well. Also, on a side note, game Center does not work and when I try to open the app it's just a blank screen and when I go into settings, click on the play icon, it does not even open.

  Back to the problem of storage, I don't not even use a lot of my storage upward. Look at the photo for reference. This photo was taken after I updated.

  So I am very confused right now with my phone and I have only had it a month ago and it's already the case. It does not make sense to me to have only 4.84 GB free. I used 6,76 Go on applications, and I have 20 apps and I understand that, but whence this other 44 gb?

  Why do we say I used 44,59 GB of data and documents when I don't? Could be a problem due to the update to iOS 9.2.1?

  BradCalifornia15 wrote:

  So I am very confused right now with my phone and I have only had it a month ago and it's already the case. It does not make sense to me to have only 4.84 GB free. I used 6,76 Go on applications, and I have 20 apps and I understand that, but whence this other 44 gb?

  Why do we say I used 44,59 GB of data and documents when I don't? Could be a problem due to the update to iOS 9.2.1?

  Connect your phone to iTunes on your computer and see what the ability the bottom bar shows for storage. You can have one large amount of 'other' data which may indicate a corrupted sync or corrupted update. If you have backed up with iTunes before you update, try to restore the backup.

  Take a look at the Board to the alarm user.

  What is 'Other' and what I can do about it?

• Buy unlocked iPhone 7 right after the release date

  Friends good day! Let's say I want to buy an iPhone 7 right after the release date before apple officially begins selling the devices free SIM card. I'd be able to come simply to store and buy, for example, an AT & T phone to use with my operator? Because I know that they would be not selling sim free phones in the first two weeks. Or do I have to buy a plan as well and become a customer of AT & T? In other words, I need now a unlocked device, and can I get one without waiting for the start of the free features of SIM card sale. Thank you!

  If you buy any iPhone outright directly from Apple full paying, it is carrier unlocked.

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards

• You can print with a 6s iPhone using a printer no Wifi

  How do you print with a 6s iPhone using the printer no WiFi?

  Hey,.

  I always got WiFi printers in my house and never had to deal with this problem personally, but the following CNET article seems to answer this question:

  http://www.CNET.com/how-to/how-to-print-wirelessly-from-your-iPhone-iPad-or-iPod - touch.

  My printer is a HP OfficeJet 7500 E910, which allows me to print from any wireless device and my printer is plugged only the power source.

  Also, I did not read the entire article carefully, but I would venture to say that if you have a cable to connect your printer to your wireless router, it should appear as a network printer. If your iPhone is connected to the same wireless network as the router is mounted, you should have this success. It would still be printing wireless from your iPhone, but just a different configuration.

  Hope this helps, and feel free to respond with thoughts or questions!

  Thank you

  Michael

• Why can't I access a book that I just bought my iPhone using iBooks on my MacBook Pro using iBooks?

  Why can't I access a book that I just bought my iPhone using iBooks on my MacBook Pro using iBooks?

  Perhaps one of the main reasons is that the Apple ID, I used on my iPhone is different from the AppleID that I use on my MacBook Pro.

  But when I went to add that Apple ID for my 'family' I get the message that the 2nd "" Apple ID is already part of the family.

  Any ideas how to make this happen?

  Steve

  You need to get them on the same Apple ID choose one registered with the family and change it on the computer or device that has different ID.

• I bought an iphone used several years ago... hen his recently updated with the new iOS 7.1.2 it was locked with the previous owners account.how can I use my iphone is back with my apple and pass

  I bought an iphone used several years ago... When updating with the new iOS 7.1.2 recently, he was locked with previous apple owners account.

  its now useless. I didn't know all these crappy activation locks and all.now I have no idea

  How can I find my iphone is off and use my phone back

  iphone 4 32 gb

• Trouble when using the FPGA to record data on PDM

  Hello world

  I encounter something strange with the use of FPGAS to save data to the disk. I use 4 channels and allows saving data PDM. I use 4 different graphs to observe each channel and no bad thing. But when I check the data stored in PDM, they are not saved in the order that they are supposed to be. Each column in the PDM should represent 1 signla of a channel, but the result shows that the data seems to fill a single column, then another. I do not understand how it becomes like this. I have attached a few photos for your information.

  The data of the FIFO.read must be 1 d table, right? So when it passes through the form 'table' in my VI, it should become a 2D of the 4 column table. Each column represents the data for each channel. I don't see any problem with this Vi. Why PDM data are not saved in the right direction?

  Thank you

  In my opinion, that you simply return your dimension sizes.  The number of rows should be 500 and your number of columns must be 4.

• My computer will not read usb flash drives or recognize the iphone using windows xp

  How can I get my computer to read usb flash drives or recognize iphone using windows xp both can be played on other computers, but not this one.

  Hi Nate53,

  ·         You have the latest drivers installed for the computer?

  ·         Have you tried to connect the player to different ports on the same computer?

  Check to see if the following is useful.

  Method 1: Try to reinstall the USB controllers and check if it helps.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager. Expand the Bus USB controllers section by clicking on the sign «+»

  c. each of the devices under the USB controller section uninstall by right-clicking on each one, then click on uninstall.

  d. close Device Manager, and then restart your computer. Windows XP re - automatically installs the USB controllers in your computer, so you don't have to do anything further. Your computer is now running properly USB devices.

   

  Method 2: Log on to the manufacturer's Web site and update the latest chipset drivers and other updates to the device driver.

  How to manage devices in Windows XP

• I need a free software to use for all my students data registration

  I need a free software to use for recording of all data from my students to my computer

  sage180

  If you mean the personal info, then http://www.libreoffice.org/

• stupid questions on the use of mds-GOSA/bip_datasource data sources.

  Dear gurus,
  I'm confused about the use of some as securities data sources.
  And what is the relationship of them with RPD source data/connection pool setting?
  
  As I found in the turning performance guide, while I can't find where is the caller / user of these data sources and never mentioned turning guide turning data sources RPD which I think is more important...
  
  So I think I must have Miss understanding of something, need your help!
  
  Michael

  Hi Michael,

  The data sources mds-GOSA/bip_datasource etc. are for the weblogic server access to the metadata of Fusion Middleware.

  If you remember, we had used the RCU to create a repository of information of configuration settings, host of Fusion Middleware /product information/versions etc in a separate database, and these data sources are created in weblogic, and the different products that we install, in this case OBIEE/RTD/BIPublisher etc. can interact between them, transparently and through weblogic.

  Since then, it is the common platform (application server) on which all products have been deployed, it is necessary that we tune elsewhere too for optimal performance from the Infrastructure point of view.

  Now, the connection pool of the physical layer in our .rpd is all about access to data, and so the setting guide does not, in this regard because it is completely dependent on the type of data source, network interfaces of appeal, not concurrrent users, total dashboards, reports etc etc which is dependent demand.

  The setting guide is all about the setting of the Middleware Infrastructure + optimal settings for middleware (middleware) only.

  Hope that I was clear.

  Thank you
  Diakité

• Publish an iPad and iPhone using DPS simple editing app

  Hello

  I read a LOT of articles and seen a TON of videos, but can't seem to find a solid answer. I'm close to being ready to publish my first app. I have a folio with items built with predefined dimensions of the iPad and an another folio with the same items built with the dimensions of the built-in iPhone. But now I read that I can not publish an iPhone app using the same edition. Is this true? If so, why inDesign enabled to build an iPhone app and test it on my iPhone using the Adobe viewer?

  Any help on how I can publish this app for both devices would be GREATLY appreciated, be it by the book or full of gaps.

  Thank you

  Samuel Monsour

  Unique Edition is iPad only. You need a pro or business account and an multi-folio application to publish on iPhone.

• How to use the TRUNC function with dates in the expression builder in OBIEE.

  Hello
  How to use the TRUNC function with dates in the expression builder in OBIEE.
  TRUNC (SYSDATE, 'MM') returns 1 July 2010"where sysdate is July 15, 2010 ' in SQL. I need to use the same in the expression builder in the logical layer mdb column.
  
  
  Thanks in advance

  Use it instead:
  TIMESTAMPADD (SQL_TSI_DAY, (DAYOFMONTH (CURRENT_DATE) *-1) + 1, CURRENT_DATE)

• Oracle text using for dynamic comparison of data splitters

  Hello
  
  I have two tables with similar columns. There is a free text field (e.g. address). Address fields contain 1 to 10 words in different order.
  Address cut into 4 columns: Address1, Address2, address3, zip.
  
  ***************************************************************************************************************************
  
  I want to be able to retrieve all related rows in both tables using the CONTAINS operator and/or search fuzzy. Any other solution is more then welcome.
  
  ***************************************************************************************************************************
  
  TABLE oldaddress Data:
  
  12385 OAK LN APT 9898 LAYTON, UT 84040
  
  TABLE newaddress Data:
  
  9898 12385 OAK LN LAYTON, UT 84040 APT
  12385 OAK LN APT 9898 LAYTON, UT 84040
  12385 OAK LINE LAYTON, UT 84040
  9898 12385 OAK LN LAYTON UT APARTMENT
  12385, OAK LINE LAYTON, UT 84040
  
  Please, note that basically {color: #008000} * addresses * are the same{color}. My goal is to recover all of the new addresses by comparing the data to the oldaddress table.
  
  My steps are:
  
  -1.
  create the table OLDADDRESS
  (
  ID NUMBER (20) not null,
  ADDRESS1 VARCHAR2 (30),
  ADDRESS2 VARCHAR2 (30),
  ADDRESS3 VARCHAR2 (30),
  POSTCODE VARCHAR2 (10),
  ALL_COLS VARCHAR2 (1)
  );
  
  -2.
  create the table NEWADDRESS
  (
  ID NUMBER (20) not null,
  ADDRESS1 VARCHAR2 (30),
  ADDRESS2 VARCHAR2 (30),
  ADDRESS3 VARCHAR2 (30),
  POSTCODE VARCHAR2 (10),
  ALL_COLS VARCHAR2 (1)
  );
  -3. Insert data
  Start
  insert into OLDADDRESS (ID, Address1, Address2, ADDRESS3, ZIPCODE) values (' 11, ' OAK 12385 LN ","APT 9898', 'UT LAYTON', 84040');
  insert into NEWADDRESS (ID, Address1, Address2, ADDRESS3, ZIPCODE) values (22, "APT 9898', ' OAK 12385 LN", 'LAYTON UT", 84040');
  insert into NEWADDRESS (ID, Address1, Address2, ADDRESS3, ZIPCODE) values (' 33, ' OAK 12385 LN ","APT 9898', 'UT LAYTON', 84040');
  insert into NEWADDRESS (ID, Address1, Address2, ADDRESS3, ZIPCODE) values (' 44, ' 12385, OAK LN ","APARTMENT 9898', 'UT LAYTON', 84040');
  insert into NEWADDRESS (ID, Address1, Address2, ADDRESS3, ZIPCODE) values (55, ' 12385 OAK LINE","APT 9898', 'UT LAYTON', 84040');
  insert into NEWADDRESS (ID, Address1, Address2, ADDRESS3, ZIPCODE) values (' 12385 OAK LN, 66; "," APT 9898', "LAYTON UT»(, 84040');
  insert into NEWADDRESS (ID, Address1, Address2, ADDRESS3, ZIPCODE) values (77, 'APARTMENT 9898' 12385.', OAK LN', 'LAYTON UT', '84040');
  commit;
  end;
  
  -4. Created a section of land:
  BEGIN
  CTX_DDL. CREATE_PREFERENCE ("my_datastore", "MULTI_COLUMN_DATASTORE");
  CTX_DDL. SET_ATTRIBUTE
  ("my_datastore",
  "COLUMNS",
  "ADDRESS1, ADDRESS2, ADDRESS3');
  CTX_DDL. CREATE_SECTION_GROUP ('MYGRP', 'BASIC_SECTION_GROUP');
  CTX_DDL. ADD_FIELD_SECTION ('MYGRP', 'FIELD1', 'ADDRESS1', TRUE);
  CTX_DDL. ADD_FIELD_SECTION ('MYGRP', 'FIELD2', "ADDRESS2", TRUE);
  CTX_DDL. ADD_FIELD_SECTION ('MYGRP', 'FIELD3', 'ADDRESS3', TRUE);
  END;
  /
  
  -- 5. CREATING INDEXES
  CREATE INDEX my_idx WE newaddress (all_cols)
  INDEXTYPE IS CTXSYS. FRAMEWORK
  PARAMETERS
  ("My_datastore of the DATA store
  GROUP of SECTIONS mygrp');
  
  -6. Select all the fields:
  
  SQL & gt; Select Address1 address2, address3, postal code
  2 of newaddress
  3 where CONTAINS (all_cols, (12385 & Oak & 9898'), 1) & gt; 0;
  
  ADDRESS1 ADDRESS2 ADDRESS3 ZIP
  -----
  9898 12385 OAK LN LAYTON, UT 84040 APT
  12385 OAK LN APT 9898 LAYTON, UT 84040
  12385, OAK LN APARTMENT 9898 LAYTON, UT 84040
  12385 OAK LINE APT 9898 LAYTON, UT 84040
  12385 OAK LN. 9898 APT LAYTON, UT 84040
  9898 12385 APARTMENT. LAYTON, UT 84040 OAK LN
  
  6 selected lines.
  
  -7. * Here, I am not able to find a way to make massively for several lines? How to use the operator CONTAINS external data instead of text (12385 & Oak & 9898')?
  Should I use ref cursor / bulk collection? Maybe the REGULAR EXPRESSIONS must be useful (and how)? *
  
  Select Address1 address2, address3, postal code
  of newaddress
  where CONTAINS (all_cols, (' Param 1 & 2 Param & Param 3... &...)) Param no), 1) > 0;
  
  Param 1 & Param 2 & Param 3... &... Param n refer to ' select address1. » '|| address2 | "| Address3 oldaddress'.
  
  I use oracle 10g.
  
  Thank you for coming ;)
  
  
  Kind regards
  
  Julia

  I don't know what kind of output desired, perhaps something like the following.

  SCOTT@orcl_11g> COLUMN old_ad1 FORMAT A15
  SCOTT@orcl_11g> COLUMN old_ad2 FORMAT A15
  SCOTT@orcl_11g> COLUMN old_ad3 FORMAT A15
  SCOTT@orcl_11g> COLUMN new_ad1 FORMAT A15 newline
  SCOTT@orcl_11g> COLUMN new_ad2 FORMAT A15
  SCOTT@orcl_11g> COLUMN new_ad3 FORMAT A15
  SCOTT@orcl_11g> select o.address1 old_ad1, o.address2 old_ad2, o.address3 old_ad3, o.zipcode old_zip,
    2           n.address1 new_ad1, n.address2 new_ad2, n.address3 new_ad3, n.zipcode new_zip,
    3           SCORE (1)
    4  from   newaddress n, oldaddress o
    5  where  CONTAINS
    6             (n.all_cols,
    7              o.address1 || ' ACCUM ' || o.address2 || ' ACCUM ' || o.address3 || ' ACCUM ' || o.zipcode,
    8              1) > 0
    9  ORDER  BY SCORE (1) DESC
   10  /
  
  OLD_AD1         OLD_AD2         OLD_AD3         OLD_ZIP
  --------------- --------------- --------------- ----------
  NEW_AD1         NEW_AD2         NEW_AD3         NEW_ZIP      SCORE(1)
  --------------- --------------- --------------- ---------- ----------
  12385 OAK LN    APT 9898        LAYTON UT       84040
  12385 OAK LN.   APT 9898        LAYTON UT       84040              51
  
  12385 OAK LN    APT 9898        LAYTON UT       84040
  12385 OAK LN    APT 9898        LAYTON UT       84040              51
  
  12385 OAK LN    APT 9898        LAYTON UT       84040
  APT 9898        12385 OAK LN    LAYTON UT       84040              51
  
  12385 OAK LN    APT 9898        LAYTON UT       84040
  12385 OAK LINE  APT 9898        LAYTON UT       84040              26
  
  12385 OAK LN    APT 9898        LAYTON UT       84040
  APARTMENT 9898  12385 .OAK LN   LAYTON UT       84040              26
  
  12385 OAK LN    APT 9898        LAYTON UT       84040
  12385 ,OAK LN   APARTMENT 9898  LAYTON UT       84040              26
  
  6 rows selected.