Bounding box character labview OCR code

Similar Questions

• PDTextSelectGetBoundingRect and PDETextGetBBox producing different bounding boxes

  I used PDTextSelectGetBoundingRect to get the bounding box of a single character, then I used PDETextGetBBox to retrieve the character bounding boxes in a PDEText element. However when I get to the character in question limit box will not come out the same. The left, right and the sides of the bottom of the box are coming as planned, but the top is larger, then the original box from PDTextSelectGetBoundingRect. Any idea on what could be the issue.

  These are not only different API, they are conceptually different and work in different ways (one on content EDP page, an abstraction of the graphical model and one on the PDWordFinder, a text extractor). I'm surprised that they are also similar because they are given many different concepts of "enclosing" you might find (square em, limit of control point, nominal path, path antialisesed limit, advance left-right text...)

  The mixture of these unfortunate necessity of the API isn't. You must apply a fuzzy logic to match its content and hope for the best.

• Resizing Auto text in a bounding box (and remove the line break)

  I have a lot of certificates of completion of the course I create (using pre-made our graphic charts).  I set up some variables from my diapers and I use a data set to shoot in the person's name, the course title and date of a CSV file.  The text 'Name' encompassing that I created is set to a specific width and height (and must stay that way) with a font size of 94,22 pt; However, some names are REALLY long and are too big for the bounding box.  They dress up.  When I run the "data fusion", I need Photoshop to automatically resize the text in the bounding box so that it is not word wrap.

  For example, "Jane Doe" fits well in the box.  However, "Johnathan Cornelius Doe" is too long, and the word encapsulates.  Instead, I want Photoshop to the long name and simply its size down to fit properly in the lack of word envelope bounding box.

  I have about 200 of them to spend in Photoshop, print and send.  I really don't want to individually open each certificate to verify this last after that I have run through.  I just batch process and print batch.

  Is there a way to do this?  Please note that I have never made any script; so if this is the way it must take, I need to explain carefully and in simple terms.

  Thank you!

  OK, try this. Save the code in a text file with the extension .jsx below. Create an action that runs the script. Then, you can use this action with the batch command.

  #target photoshop
  var doc = activeDocument
  doc.activeLayer = doc.layers.getByName ('LastName')
  var ly = doc.activeLayer
  var before = ly.bounds[2]-ly.bounds[0]
  
  var amt = doc.width/before*100
  transText (amt)
  ly.translate (-ly.bounds[0], 0)
  
  function transText(amt){
      var idTrnf = charIDToTypeID( "Trnf" );
          var desc2 = new ActionDescriptor();
          var idnull = charIDToTypeID( "null" );
              var ref1 = new ActionReference();
              var idLyr = charIDToTypeID( "Lyr " );
              var idOrdn = charIDToTypeID( "Ordn" );
              var idTrgt = charIDToTypeID( "Trgt" );
              ref1.putEnumerated( idLyr, idOrdn, idTrgt );
          desc2.putReference( idnull, ref1 );
          var idFTcs = charIDToTypeID( "FTcs" );
          var idQCSt = charIDToTypeID( "QCSt" );
          var idQcsa = charIDToTypeID( "Qcsa" );
          desc2.putEnumerated( idFTcs, idQCSt, idQcsa );
          var idOfst = charIDToTypeID( "Ofst" );
              var desc3 = new ActionDescriptor();
              var idHrzn = charIDToTypeID( "Hrzn" );
              var idPxl = charIDToTypeID( "#Pxl" );
              desc3.putUnitDouble( idHrzn, idPxl, 0  );//259.646484
              var idVrtc = charIDToTypeID( "Vrtc" );
              var idPxl = charIDToTypeID( "#Pxl" );
              desc3.putUnitDouble( idVrtc, idPxl, 0.000000 );
          var idOfst = charIDToTypeID( "Ofst" );
          desc2.putObject( idOfst, idOfst, desc3 );
          var idWdth = charIDToTypeID( "Wdth" );
          var idPrc = charIDToTypeID( "#Prc" );
          desc2.putUnitDouble( idWdth, idPrc, amt);//1050.143628
          var idIntr = charIDToTypeID( "Intr" );
          var idIntp = charIDToTypeID( "Intp" );
          var idBcbc = charIDToTypeID( "Bcbc" );
          desc2.putEnumerated( idIntr, idIntp, idBcbc );
      executeAction( idTrnf, desc2, DialogModes.NO );
      }
  

• Can I change the bounding box of a symbol?

  Hi, I'm doing the detection of collision for my game, but I don't necessarily like the premade hitTestObject and hitTestPoint methods as they are.  I've looked everywhere to find out how to change the bounding of a symbol box, but all I found was how to get his rectangle encompassing.  I am aware of the pixel perfect collision detection there code, but I try to use boxes bounding for certain classes.

  Is it possible to change the bounding box of the symbol and still have this area recognized by hitTestObject and hitTestPoint?   If this isn't the case, I could write my own code of colllision detection.  =/

  Thanks in advance.

  Hello, Sylvandyr!

  You cannot change the objects encompassing. But you can create a shape on the inside. Then check the hitTest with this form instead of test the movieclip.

  See you soon,.

  CaioToOn!

• How can you turn on and off this bounding box?

  Hello

  I work with a group of students in AfterEffects and showed students how to move an object.  There is a bounding box appears around the work of everyone with the exception of a student and for the life of me I can not understand how to market.  I'm probably using the wrong name for it, but I enclose a photo.

  Could someone point me toward putting in - should I use to activate it?

  Thank you!

  This is the layer handles. See-> see the layer controls to turn it on. If the layer controls are on and you see her always, click on the compose window and choose View-> display options and see that the "handles" is checked.

• Check if the bounding box is another setting of

  Using the PDETextIsAtRect function, I discovered that if returns items that do not part of the bounding box. So I wanted to know if I have two bounding boxes, is it possible to check if the an element bounding box is located in the bx covering something else.

  This isn't valid C. Eh well, clearly, it compiles, but it doesn't do very well what you think. You cannot use form one<= b=""><= c,="" only="" compare="" two="" things,="" not="">

• How to create a bounding box in Photoshop CS6?

  Hello, group.

  The other day, I saw an Adobe web page that showed a picture whose part was a sheet inside. The sheet was locked in a bounding box. However, it seems unlikely that the person working on this image needed (where this picture was concerned) for the text tool. If you need to place a block of type within a bounding box, you simply select the text tool and drag. This creates a bounding box.

  What of those occasions when no text is at issue, but simply a physical object in the picture? How to create a bounding box for this?

  Thank you for all the helpful tips.

  S.G.

  You can also use the move tool, with "Show transform controls" checked in the options.

• Reset bounding box

  In versions before 2015 Illustrator, choose object > transform > reset the rectangle encompassing would reset the bounding box so that she was right, even if an object had been turned. Now, if the shape is created with a basic shape tools, as the polygon, this command does nothing, it is not correct the bounding box.

  Does anyone know how to reset the bounding box on forms of base in CC?

  It seems that we are stuck with it if we want to have forms of living. If you go to object > shape > expand your shape, you can reset the bounding box. But if you then go object > shape > convert shape, the bounding box jumps to angle.

  Thus, the choice is currently Live forms or reset the bounding boxes, but not both. That answer your question?

  (Time for a feature request!)

  ~ Jane Edwards

  

• I want to fill track of Image with white people, but not the bounding box

  I want to fill track of Image with white people, but not the bounding box.

  I have several black and white pen and ink sketches that I want to scan to JPEG, make a record of the image in the drawing line and have "encompassing" transparent but keep the white background in the image.

  Is there a way to do this?

  You would need to expand the trace, and then remove the 'bounding box white' after tracing.

• No bounding box using the drawinmg object.

  Hello

  To animate a CC, I find that if I draw a circle with the Oval tool in object drawing Mode, there is no encompassing visible around the object.

  My understanding is that a bounding box should appear around objects in Object Drawing Mode.

  Can someone explain this? I use a wacom with OSX 10.11.2 stylus

  Thank you.

  It is a change with the new version. Limits will be consistent with the actual shape of the object to place the rectangular outline that you are used to seeing.

• Do I turn on the leaders, I lose guides, bounding boxes and anchor points.

  When I turn on the leaders, or open a file with them, it is not appear.  I can still do the guidelines and select them, so I know what they are.  I'm also losing anchor points and bounding boxes.  Any ideas?

  Have you tried to switch between views GPU and CPU? CTRL + E

  It may be a GPU problem... ?

  What is your system, the version of the application, etc.

• When you change the text, all the text in the bounding box is removed...

  I have a PDF file that was created in a different version of Adobe. The Adobe program, I am currently working with that is Adobe Acrobat Pro DC. It is on a Windows 7 PC. When I change the text in the 'framework', any word, I try to change, all of the text in the box is removed. How can I stop this from happening?

  Nevermind, I figured it. I had select the bounding box and select "bring forward" under the "objects" tool

• How can I make the bounding box to sit on the outside edge?

  I used CS6 for years and just purchased CC. One annoying thing I noticed is that the bounding boxes do not sit on the outside edge. How can I change this? Please note that there is no line on this box.

  

  In Preferences > general control "limits use of the preview.

  Can cause other difficulties.

• Why the bounding boxes are different between the XI Acrobat Pro and Acrobat DC?

  Hello

  Firstly apologies if this been asked elsewhere, but so far I have failed to find a solution.

  I have Acrobat Pro XI and Acrobat DC, each on two different PCs using Windows 8. Why the function edit text & Images interprets the same PDF document differently when displaying the bounding boxes. In Pro XI he produced 7 inclusive about 7 decent size paragraphs of text only. In MS bounding boxes are reduced to only 3 each effectively covering most thick of text in the document. To quickly select 3 of 7 bounding boxes to remove them entirely from my PDF seems not to be possible in DC, where I appear instead of having to select large portions of the text instead and delete accordingly.

  I don't see where in preferences maybe you can change the 'sensibility' or 'threshold' to distribute a PDF file in smaller sizes (but more) bounding boxes. Is it possible to make DC behave like a Pro XI?

  Any help would be appreciated.

  Mark

  These boxes are the result of speculation, well enough. The algorithm behind

  He probably changed between versions, so the different results.

  There is nothing you can do about it.

• Help please with bounding boxes!

  Hello

  I'm new to Illustrator and I have a problem with what I think are the bounding boxes. All my bounding around text and image boxes are missing, so I can't resize or change the text as a paragraph or resize objects. Instead a bounding box appears around my work plan alone, then I can only resize everything as a whole. After you have clicked several times to select a paragraph, it appears (see photo). This possibility only to remove and re-add the text on a single line, but I'm unable to select or change the entire paragraph. Also out of the tool bar above my fonts and and size appear no more.

  How can I get my return to normal bounding boxes? Or if not the bounding boxes, what do you think is the problem?    Thank you!!

  you open a PDF file?

  Check the layers panel to review the structure of the document and then solve it.