BPM process stops just to work on a Service mission (?)

Similar Questions

• Have used Windows Movie Maker very well for months and now it stops just to work

  OK, so I had a recent problem with Movie Maker. How original is that? For months and months I used it with only minor headaches. But I can't understand it and I spent hours to friction on this problem and the search for something. All Google tell me is to make sure that my files are in a format that is accepted! Duh! I use them very well until about a month ago.

  After months of works very well, many of my clips imported media (especially. AVI and others. WMV) has decided to stop working one day. The video will not play, but the sound is very good. I re-imported the videos just to be sure, but no luck... He would not even show a thumbnail after I imported the.
  
  Original title: what is the problem with WMM? Help, please!
  
  I tried to look at the files in Media Player and got a black screen with audio complete.
  I reformatted the. AVI files (using zamzar.com) in. Format WMV, but when I tried to import those, he would give me some nonsense. In any case, I tried to defrag my drive hard as someone suggested online (I have an old computer anyway) but I don't really think it helped.
  It could be a codec problem (I don't know what would have prompted such), the Enigma is that SOME of my clips will play in the preview, but they stop working as soon as I drag them on the timeline. And I found one. WMV file in one of my old projects that will play in the panel mounting.
  I even tried to save an unfinished project to my computer (16:9 aspect ratio, high quality NTSC). But I got an error message: "WMM cannot be saved to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again. "So I tried to save the recommended"best suited"on a blank CD and it always gave me this message
  I hope this info helps (I don't know what most of it means):

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  Dimension E521 system model

  System Type X 86-based PC

  Processor x 86 family 15 model 79 walk AuthenticAMD 2 Mhz ~ 2004

  BIOS Version/Date Dell Inc. 1.0.3 02/10/2006

  SMBIOS Version 2.4

  System directory C:\WINDOWS\system32

  Boot Device \Device\HarddiskVolume2

  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).

  Total physical memory 512,00 MB

  Available physical memory 145,58 MB

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  1.03 GB of swap file

  Your specifications specify that you have 512 MB of physical memory...
  It's your RAM. When video editing with an application like film
  Maker it is generally recommended that a system has a nude
  minimum of 1 GB of RAM and 2 to 4 GB would be better.

  That said, perhaps the following information will be useful:

  The most common reasons for Movie Maker problems are...

  (1) source incompatible or damaged (video clips, pictures, music files).

  (2) incompatible, corrupt or nonexistent filters (Codecs).

  (3) projects that are too big or too complex for the system resources.

  First... Open Movie Maker and go to... Tools / Options /.
  Compatibility tab and disable all filters / OK.

  Try to create your project and find out whether there is a
  improvement.

  If no improvement, return to the same settings
  and left click Restore values by default all the button / OK.

  As for file formats...

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  (FWIW... DV - AVI is a specific format... it's
  doesn't mean "everything". AVI files are compatible with
  Movie Maker.)
  Audio - wav, wma, wmv

  There are to many converters available on the net and
  Some are better than others... it can be interesting to try
  experiment and see which suits you best.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  There is a small chance that download and installation
  one of the following Codec Packs would improve the problems.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Proceed at your own risk *.

  Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows XP - Vista - 7)

  Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (Windows XP - Vista - 7)

  Download CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/
  (Windows XP - Vista - 7)

  Good luck...

• How can I fix the touchpad when it stops just to work?

  My touchpad is everything suddenly does not respond to touch. I tried re-booting and looking for the mouse controls, but nothing has worked for me so far. Any help much appreciated woul.

  Pressing Fn + F1

• How to deploy BPM processes with the shape of the ADF?

  Hello world

  I'm a newbie on the BPM (11g) and ADF. I created a BPM process and an ADF train in the same project.

  I was wonder if I can deploy the makings of the ADF, and begin to test only the train before hook to the top of the form of the ADF with the UserActivity.

  How can I do? How can you deploy? Better create a jar or ear?

  Any suggestions?

  Best regards.

  Fairlie

  Hi Fairlie,

  Here is a brief one minute video that I just post on youtube you through one of the ways to deploy a project ADF - http://youtu.be/irt4_1IL0vosteps.  It's the deployment as an ear file.

  If you are using 11g, you will not be able to deploy in your integrated WebLogic Server that works using JDeveloper.  You will not be able to right click on the page of an ADF jspx file or its taskflow and click Run, if there is an ADF application used in conjunction with a BPM project and its human tasks.

  Hope this helps,

  Dan

• Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

  Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

  It won't let me choose a mode which worked well, it is stuck on "Start windows normally" for 20 seconds.

  Hello

  Restore the system from the recovery console and check.

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My wireless switch works / stop does not work anymore

  I have a HP Pavilion dv7-1245dx Notebook. My switch / stop wireless internet worked very well until I did the last update. Now my wireless button just stays light up in red. When I touch it it does not turn blue. What should I do?

  Have you tried using System Restore and go back to a restore point made just prior to the problem occurring?

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

• How to duplicate a payload in a BPM process?

  How to duplicate a payload in a BPM process?

  Thank you

  The screenshot of the process the Workflow tool that you used looks like it helped a split occurs with no melting downstream point.

  This is not allowed in BPMN.  Parallel and inclusive gateways must have a downstream melting point.  Because the model you have described has no melting point, it would be better managed using an activity to send without being involved a bridge.

  Once this activity send is called, another process (or service) is called asynchronously.  In this case, the process called can contain activities that you are showing "Path 2".  Once the send activity is called, the work item instance continues to the next step of the original process automatically and would go maybe through the series of activities that you testify "Path 1".

  Here is a recent blog post that I wrote which describes the patterns of different processes supported in BPMN and Oracle BPM: model processes using BPMN BPM | AVIO Consulting

  Hope this helps,

  Dan

• Separate the UI and BPM process deployment.

  Hi all
  
  We have memory problems while deploying our application (11.1.1.5) Fusion web on the server with following config Details: -.
  
  WebLogic server 10.3 (installable was generic to the 64 bit OS).
  Windows Server 2003 SP2 with 64-bit support,
  RAM is 8 GB.
  
  To work around the problem, now we want to deploy UI (ADF) separately from the BPM process.
  
  Is this feasible? If Yes, then how?
  
  Any help or pointers in this respect would be useful.
  
  
  Thank you
  PK
  
  Published by: user10314058 on January 12, 2012 01:33

  Hi PK
  Yes and infact the more standard to deploy a workflow application consists of 2 parts. One is the jar of workflow real sca, with all streams work, tasks and bpel stuff etc. And the other is full application itself with all projects such as TaskForms, any other EJB project, util, etc EXCEPT the workflow, and then ear deployment. Kind of JDeveloper, menu application level, you can create a deployment profile and add all projects (including taskforms) BUT NOT the flow of project work in the Assembly section. You're the ears. Then for Workflow project, you can always deploy to a JAR file. Take these EAR and JAR and deploy on any server of soa applications.

  NOTE: When you generate a JAR for Workflow, be sure NOT to check your TaskForm projects. It is the list of all projects with the boxes, do not check them.

  Re: Migrate a file TJS

  Thank you
  Ravi Jegga

• BPEL process stopped polling after the displaced Table

  Hello
  
  Oracle 10.1.2
  SOA Suite 10.1.3.4
  
  We have a process BPEL has been deployed and working for a while. This process is defined to query a table in every 5 seconds and set the State on BPEL_POLLED once found. It was working fine until I dropped and re - recreates the table that was questioned. (No changes have been made to the structure of the table - I was mearly testing a build script).
  
  This table was recreated, the BPEL process stopped polling. I have re-deployed service, stopped and started the server and it is not the voting table.
  
  May I take it that drop and recreate the table being queried have an impact on the electoral process and I looked through the forums, but I don't really know what I'm looking for?
  
  I'm not a developer, BPEL, however I was left the task of working through this, any help would be appreciated.
  
  Concerning
  
  JB

  Hi James,
  This is an expected default behavior (in 10.1.3.4 MLR #7 from at least). The State of the process is set to 'stop' if the vote fails with a SQL error. If you look at the log file, after you turn on debugging, you'd be able to see an explicit message that indicates that the process is currently disabled.

  If you simply change the status of the process to 'On' even once, it would begin returning.
  Or to be on the safer side, if you want to change the structure etc. of the voting table, its best to withdraw from the process, modify the table and then activate the process.

  Hope this helps,
  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles

• My ability to thunderbird to receive the mail suddenly stop and it worked before. What can be the reason? Now, I'm not able to receive all e-mails.

  My ability to thunderbird to receive the mail suddenly stop and it worked before. What can be the reason? Now, I'm not able to receive all e-mails.

  This forum is the official place to support Thunderbird. There is no phone support.
  If you think that this helps to explain the problem, you can add a screenshot to your message.
  You are supposed to follow instructions and suggestions that precede.

• Speakers just stoped working on my Tecra 9000

  Any 1 can help me?
  My speakers just stoped working on my Tecra 9000 and I tried the update for the sound.
  My drivers are up 2 date. I tried all the fixes everything... Please help

  Hello

  What you connect the headphones?
  You hear something?

  Did you check if mute is not activated?

• Recovery process stops error 1117 Satellite C650

  After the removal of a lot of files with virus, the C650 was slow. Decided to reinstall wondows 7 on partition D: restoration. After formatting C: restore failed.
  I ordered restoration Media, USB received follow-up procedure.
  After 3 hours it tells me there is an error 1117. a new attempt has begun putting. After 1 hour still error 117 and the process stops.
  I made a picture of the screen

  What can I do?

  could it be save you shut down the computer and try again from scratch?

  Of course, you could interrupt the recovery process and could start the recovery procedure, once more, using the recovery media (flash memory stick or DVD discs)...

• Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  You should be able to move your cursor to the top of the screen and the menu bar will fall.  So, you start with

  

  Drag the slider to the top of the screen against the edge and hold that and you should see

  

  Click the button of "green".  This should take you out of mode full-screen Mail.

  Command + control + F should do it too.

  Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output

  You should also be able to use the command + Tab to switch to another application

• My PC has XP Tablet installed. I would like to re - install, do not have the disks. I have XP Home drives and unused product valid key. I don't need the features of the Tablet, just a working pc. Can I do this?

  My PC has XP Tablet installed.  I would like to re - install (it's so slow) but do not have the disks (PC was good for me to my business when I'm retired).  I have XP Home disks and another valid product key and not used.  I don't need the features of the Tablet, just a working pc.  Can I do this?

  Toshiba Portege P3500, XP Tablet.  2 GB of Ram.  Has had a lot of software installed and uninstalled during the years, and even if I do cleanups and defrags, etc, it's still dog slow.  I want to just start from scratch.

  Yes, you can install your unused copy of Windows XP Home Edition, assuming that it is a "Full Version" and not a "Version upgrade".