My wireless switch works / stop does not work anymore

Similar Questions

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• HP Pavilion g6 (B1X18EA #ABH): switch to Internet does not work after update of 10 64-bit Windows

  Today I updated my laptop Windows 7 to Windows Home 64 bit OS 10. Everything seems to work fine, except the WIFI. Windows can't find my card, but don't wake him. My button built-in wifi (f12) got a red light on the subject, even when I pressed it. I tried the buttons Windows 8 wireless driver, but I does not solve my problem. With this driver installed the button turn the power Modeavion. Not between WIFI. Also the wifi settings WIFi will go off. When I try to turn it on, it turn on directly to 'off '. Internet connection cable works flawless.

  I gues it's a driver problem, so I was wondering if there is a next pilot? Or is there another way to turn it on.

  Please help me. It is very annoying.

  I've read som other forums and I came tot a solution:
  1. install Windows 8 button wireless driver
  2. perform a hard reset
  3. reboot the system
  4 boot BIOS tot, load default values
  5. the wifi button works.

• The Microsoft Wireless mouse right button does not work

  The right button of the mouse on my Microsoft Wireless Mobile Mouse 4000 does not - at first I thought that it was a hardware problem, but when I used the mouse properties/control panel to change the buttons on the mouse, the right button worked and the left mouse button does not, which leads me to believe that it is related to the software/driver.
  I have the latest version of the driver/Intellipoint software.  I am running Win 7 32 bit on a Lenovo ThinkPad T410.
  Change the port USB did not help; the problem persists, no matter which USB port I use for the receiver.
  Reinstall the software Intellipoint also did not help.
  It is a recent issue; I had the mouse for several months and it has worked well upward until a few days ago.
  Googling the problem that leads me to believe that it is a common problem, although most people seem to think it's a hardware problem.

  Hello

   
  Run the Fixit described in the article:
  Troubleshoot a wireless mouse that does not correctly
  
  http://support.Microsoft.com/kb/321122
   

  I also suggest you to remove the batteries in the mouse and keep it idle for 10-20 minutes. Insert the batteries and check it out.

   
  See also:
   
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   
  I hope this helps.

• Stop() does not work in the slide presentation

  I have a very simple stop() in my managers name and a blade that is under the master slide. No other code. The strangest thing is that the first stop() does not, however, the last stop() action works. I thought that it is something to with the Flash presentation type documents so I created a normal Flash document and of course the first frame stop() action works. I even created a fresh new Flash presentation document type and the same effect of the first action of image does not. No idea why this is happening to the presentation type documents?

  your last stop works well? try to put some images b4 the first stop... see if she jumps on it. ... he shouldn't do it... but it could due to the loading on presentation.

• Fingerprint reader does not react anymore while the software seems to work (Thinkpad E530 Windows 10)

  I used logg in via the reader of fingerprints (windows 10) with no problems, now the fingerprint reader does not react anymore when I pull the finger. I managed to remove all the passwords in the password manager (still not sure about it as I don't really understand how all the components work together) hoping that would solve the problem. Not the fingerprint reader software keeps asking me to register a new finger. Everything seems to work fine (I can pick a finger to be registered, type my password windowns) until I asked me to draw the finger on the fingerprint reader: nothing happens! The indicator that shows how the finger was scanned shows nothing at all. Looks like the software works, but the fingerprint reader itself is dead. However, looking into the information system the "TouchStrip Fingerprint Sensor' (WBF mode advanced) seems to work fine.

  Help, please. I don't have any idea how to find out what's not here.

  Thank you very much for the tip! He works in fact :-). Even if it does not seem logical to me, as I never put it in place a front pin - and fingerprint reader work very well even without PIN code. But who cares - the main thing is it works now! So thanks a lot again :-)!

• Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

  mifi4510L

  Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

  THX

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• Stop does not appear on the menu bar on the 29.0.1 Version. How can I install?

  Stop does not appear in the menu bar on the 29.0.1 Version and I can't find the icon in the Customize menu. Simply, he seems to have disappeared. I would also like the words under the menu icons. Also the icon charge cannot be moved or customized.

  I HATE IT WHEN SITES ARE COMING OUT WITH A NEW "STREAMLINED" APPEARANCE THIS MEANS LESS AND LESS FEATURES AND MORE DIFFICULT TO USE.

  Help!

  Have you tried classic restaurateur theme? https://addons.Mozilla.org/en-us/Firefox/addon/classicthemerestorer/

• Can I upgrade from lightroom 5 to 6 or 6 does not exist anymore, and my only option is to Lightroom CC?

  Can I upgrade from lightroom 5 to 6 or 6 does not exist anymore, and my only option is to Lightroom CC?

  Hello

  You can proceed to LR 6.

  Please see store Adobe - Adobe Lightroom 6 - upgrade

  Hope that helps!

  Kind regards

  Sheena

• Update error Code 8024200B & unable to update Wireless Keyboard 800 - keyboard does not work

  I have win7 pro 32-bit. Some updates fail.
  Currently updates for keyboard and mouse USB MS they return the error Code 8024200 B, for which I am unable to find an explanation.
  It is a problem that I bought a Wireless Desktop 800, and the keyboard does not work.
  I tested the material on my Win7 32 bit system and it works fine.
  The device is detected and enabled, etc. of thin batteries
  There is no drivers for 800 system, so I was hoping that the update would solve the problem, if I could install it.
  Any ideas on the error code, or how to solve the problem of keyboard?
  Thank you
  * Problem solved. These updates succeeded at the 5th attempt - and I was able to install 'Microsoft mouse & keyboard Centre' that got my keyboard working *.
  * I'll leave the rest of my response below in case it would be useful to all. **

  Thanks for the reply Fazil.

  1. There is no way to 'connect' from the keyboard to the computer. I insert the usb bluetooth dongle and it works for the mouse but not the keyboard.
  2. the updates are the two option, without numbers KB:
  -Other hardware - Microsoft Hardware Microsoft USB keyboard
  Mouse Microsoft USB - other hardware - Microsoft Hardware
  3 update error message for both simply put the Code 8024200 B. There seems to be no documentation for this error code.
  All security updates I ran & updated ok.
  I tried various things - stop programs anti-virus etc.
  4. This is the first time I tried to run the mouse wireless 800 & keyboard on this PC. I checked on my other laptop running exactly the same OS and that's fine, this isn't a hardware problem.
  I tried fixit, who found nothing wrong.
  In Device Manager, it shows the two devices (keyboard and mouse) twice, as on the other laptop.
  Bluetooth > open settings Options are set to "enabled" and in the material it shows "HP Integrated Bluetooth Module" and "Microsoft Bluetooth Enumerator.

• Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter does not work.

  I have Acer laptop V3-571.

  I have upgraded to windows 8 Windows 7.

  Adapter Qualcomm Atheros AR5BWB222 Wireless Network Adapter is showing work fine in Device Manager, but the wifi does not work.

  When I checked the soft switch in the Pc, swith found to disable the position. Could someone help to solve?

  Well I solved it by bypassing the wireless adapter and buy something external usb nano wireless, it works perfectly now. problem still not fixed however.

  I found a way to fix my network, ive manually uninstalled the network cards, drivers and downloaded the following file "win78 - 10.0.0.75 - whql" of
  http://www.Atheros.cz/Atheros-wireless-download.php?chipset=81&system=6
  and simply installed the driver via Device Manager

  Hope this will help some of you.

  Kind regards
  Stamp of Pieter

• Pro/wireless Intel 2200bg card does not work

  Toshiba Satellite M65-S9062 with 2 GB of RAM (and old... I know)
  Now back to the original state after using the recovery discs. If it is XP Pro SP2.

  The laptop was a donation to our Organization and the previous owner of thing asked was to reformat HD. It looked like an easy task because he had the original recovery media.

  After a total reinstall the network card wireless (Intel (r) PRO/Wireless 2200BG) shows a yellow exclamation mark in Device Manager. And the message says: "this device cannot start. (Code 10) ».

  It was working fine before reinstalling the system.

  I tried everything I could think of:

  1. drivers of toshiba, Intel, other brands (as some forums say some certain brand driver worked for them)
  2 update (all updates) windows SP3 included
  3 reinsert the card and check that the black and white cables (but why should be after a simple reinstalled XP?)
  4. try with switch WiFi on... try with switch...
  5. modification of permissions in the registry
  6. remove the card, reinstall the system and install card later
  7 read the explanation of MS for a code 10 and follow their suggestions to fix
  8.... 9.... 10...!

  I'm still far from ready to give up :) BUT!

  Right now I use a USB wireless network but it is not possible that the laptop will be in public space for anyone to use and which would mean the stick would disappear immediately (Yes... you don't believe :))

  Any help would be much appreciated. Please :)

  11. Exchange of a new card.
  12. I'll give you upwards. Now I use the external WLAN USB card.
  13... 14... !!!

  ;)

• T410 AiO customer CAPS, NUM, and scroll keyboard stop does not work with PCoIP view desktop computers

  We have problems with our t410 AiO customers, where the CAPS, NUM and scroll stop lights on the keyboard do not work with view PCoIP desktop computers.

  I found the below information and a work around:
  If you use the Protocol PCoIP to display on a client system Ubuntu 10.04, the CAPS Lock, NUM Lock, and Scroll Lock lights on your keyboard do not work with desktop view. Although the lights do not work, the keys themselves work.
  Solution: Set the following configuration in a configuration file, such as/etc/vmware/config:
  mks.keyboard.useXkbSetNamedIndicator = 'TRUE '.

  The problem is this difficulty is already in place via the latest version of the HP, Z6A440, software that is installed within our Organization.

  What I discovered, is that the model that we initially bought for the test doesn't have this problem.  However, the models that we ordered since that time, DO have the problem and the solution above does not work as expected.

  The model originally ordered for test is still a customer of IOA t410... but there are 4 "under models' for customers of IOA t410... that we have to test is a H2W20AA, while those we receive and distribution are the H2W21AA model.

  No idea why, when connected to the desktop from view, that models of H2W21AA have this problem?

  H2W20AA is with Teradici PCoIP optimized, which can support PCoIP better, but H2W21AA is not with Teradici. That's the difference.

  However, the issue that you are experiencing does not matter in fact, we have not heard of this problem before. I would suggest that you do the following to see if there is no change:

  1. Go to download the latest VMware View 2.3.4 for t410, follow the instructions to install.
  2. If suggestion 1 does not work for you, try to connect to another VM group or set up a new machine virtual clean
  3. Call HP service center to save your problem for further investigation if the suggestion above did not work

• Microsoft Wireless Optical Mouse 2000 does not work.

  Original title: mouse

  I use a Microsoft 2000 wireless optical mouse on my laptop and it won't work, even if you say that my device is not working properly

  Hey nanapaw,

  Please see two items of the below knowledge base for help.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to find wireless adapter/driver installation does not work

  I recently had to open my laptop HP G7 to blow off the dust of my fan and under the keyboard. When I put they keyboard back together, my wifi does not work. I am now on an ethernet connection. Open a network connection, there is no icon wifi adapter. I tried to install the driver, but mid install, I get this message "the driver that you want to delete the files will not be deleted as the corresponding card is not installed". I don't know what that means, but when installation is finished, the Wi - Fi connection does not always appear in network connections, and the driver does not appear in Device Manager. What else can I try?

  Hi @king26 ,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I think that after you open your laptop to clean dust from your fan and that breaks down your wireless card is no longer recognized.

  I suggest deleting and reinstalling the wireless card, as it can move during the cleaning process.

  The driver could not complete the installation because he couldn't find the map to focus on.

  Please let me know the results.