Brand new G560 - all function keys launch "a recovery key.
The subject line says it all - whenever I try to use one of the special keys, such as volume-to the high or low volume, instead of the marked task, the lap top throw a key recovery in place.
Any suggestions on how to fix this?
I'm as Win7 64 bit.
Sigh. Both pis - first time with a lenovo keyboard, I confused the small key with the Red at the top of the keyboard label as the modifier key f instead of the fn downstairs.
Tags: Lenovo Notebooks
Similar Questions
-
Brand new and all of a sudden death! What should I do? Bought on Amazon
Hello
Brand new Tablet convertible, upgraded to Windows 10 without a hitch. Was happy with its performance, but this morning I took it to work with me (I use it for work as well to the list of customers using a calendar) and only nothing when I hit the power button. I thought that it was not charged, so I took it home to get it on the charger... nothing. Dead. How a new Tablet may be already dead? I don't have the packaging as it was heavy, so I threw it. I really hope that I am not at a few hundred dollars on something that is not my fault.
If anyone has ideas of what we must try thanks for posting.
Thank you
Richard
It would be useful to know which model you have.
Sometimes a system can get stuck in the mode 'sleep', it can usually be fixed by a forced feeding cycle. Press in and hold the power 10-30 seconds, wait a little the turn on normally. Let us know if this is useful, and if not, we will try and dig deeper into the diagnosis. You should have a one year warranty if it was bought new, so no worries on that side.
-
My brand-new U410 has a key on the keyboard has no
When I am very happy with my new laptop, I just realize that the "s" key had a problem. It is hard to type and seems to be looser than the rest of the keys. I like to shoot to wound again but don't know how to do. In any case, is it a good idea to take a risk, or simply go to the warranty service. Because now I stay at the Viet Nam and service here is terrible and slow. I bought this laptop in the United States
It was so awkward, Zehn. I was so disappointed on this key, you know, press imbalance so. But when I packed it and put it in the backpack, after a day of work, I came and turn. Bump, everything woks perfectly. I guess that the rubber inside the key to the race (I don't know how it's called) dislocated, however when I moved, she accidentally returned to the correct position, then this is how I "fixed"... ". Next time, maybe anyone experienced this laptop just turn problem on the opposite side.
-
Some function keys do not work on my Portege R830
Like others, I have a new Portege R830 and experience the sudden and unexplained feature of keys loss 13 function. My os is 64-bit native windows 7 with office 2010 installed subsequently. I have the SSD model.
I followed the instructions, withdrawal PVAT and re-setup, and I have two VAP and operational flashcards. I used the drivers of the USA site for the last series (Australian and European pilot sets are old and different versions).
In most, but not all, function keys are working again. What does work are the following:
-Functionkey F12 does not
-volume up and down keys not working not - what I'm more interested - suggestions on how to make functional again please?also, on re - install VAP, I lost the feature on ecobutton. Suggestions on how make it work again?
Thank you in anticipation
Hello
You are on the guy to the right way of the VAP and utility Card Support Flash controls the FN keys. If you have a European model for laptop, I advise to use the drivers of Toshiba page of European pilot, but generally avoid a difference in software
However, in my case restart the cards Flash allows you to recover the functionality of buttons FN. Can be found in all programs-> Toshiba-> Flash, Flash cards cards.
In order to verify if restart help.Regarding the key Eco: ECO Utility controls this button too then recommend installation/reinstallation of the software next to the VAP
-
BRAND NEW AND OUT OF THE BOX! Help!
I just finished setting up my new T5 rebel and was able to capture an image. I try to take pictures and can hear the shutter, but does not display the photo taken, or it will appear in the storage of photos. Someone help me, please. I am brand new to all this.
«"... does not display the picture taken, or it will appear in the storage of photos"»
I don't know THAT DISP causes permits it not reading on a T5? You can reset the camera. A "cancel all the settings' in the menu?
-
VSAN showing license key have expired on a brand-new facility.
Currently have a test laboratory of the three hosts Vsphere implemented.
With each host with a brand new facility, from magnetic today ESXi 5.5 and at least an SSD and one of the hard drives.
I was able to initially configure the vsan through the command line on the first host, and then once I had imported the latest version of the standalone version of VCenter and added the two remaining hosts on the VCenter server. It would allow me to add additional disks to the cluster vsan because of a vsan expired license key error. I found this rather curious because everything is the oldest in its facility in four hours.
If you help me to find a way to get the vsan on trial license once again, would be great.
After having play with VCenter apparatus and ESXi hosts, looks like it was a problem syncing after all. Not so much the time set in the BIOS, as well the ignition when the VCenter unit is initially configured.
-
I just bought a brand new "Magic Keyboard" and the last row of keys DO NOT WORK. I'm outraged and absolutely do not update to OSX Yosemite or El Capitan. It is a piece of hardware that does not work as expected.
] How can I fix?
Stop SCREAMING. Apple isn't here, only volunteers trying to help people to get unraged.
The magic keyboard requires OS X El Capitan 10,11 or later version. That is printed on the box and said in the Apple Store online, just as it is for the Magic Mouse II. If you still use OS X Maverick and remains adamant about not upgrading to El Capitan, then just take the keyboard for a refund.
-
New T520 function key does not work do not
Good forum,
Just got my first ThinkPad, a T520 and after the UltraNav driver update it seems that some of my function keys no longer work. I've seen similar posts on this problem but all stem from different problems.
My volume keys work, but there is no image on the screen on show mute/up/down. My microphone mute button doesn't seem to work at all, nor does the ThinkVantage button.
According to the keys function F2, F3, F5, F6, F7, F8, all do nothing when used with the function button, however I can use F4 to sleep, F12 to Hibernate, the brightness and PgUp all light work.
I tried the BIOS to see if I could affect something there, but I saw no way to do it.
Any help in getting the function keys working properly again would be greatly appreciated!
Thank you much in advance,
ADK
Hey again,
Fixed the issue, incase someone else has this problem, it is called driver Hotkey for Windows integration.
-
I need to disable all skills specific to HP function keys
I have a HP Pavilion G7 - 2551dx with Windows 8.
I want to disable all the functions specific to the HP keyboard function key. -F1 to F12 functions. I don't need or want Ttout of them and in fact, they are just shortcuts to make things I already do through other means. His airplane mode, brightness, etc - I don't want one of these functions mapped to my function keys.
How do I with this model?
I have a 3 year Compaq, and it was an application that gave the PC these functions. I could disable all these features to uninstall this application. I can't find such an application on this computer Pavilion G7. Rather, these functions are software controlled, they are activated in another way. The specific features of the HP gets in my way, because I accidentialy press these keys by mistake. They get in the way of games and other applications that map with the function keys. I have to be able to completely disable these functions as I have in the past with my Compaq.
How can I do this?
The link above says this:
"On most of HP and Compaq computers laptops, it is necessary press the function (fn) key while pressing one of the f1 through f12 keys to activate the features by default; as for example increase or decrease the brightness of the screen, the sound volume, sleep, keyboard lock, etc... On computers laptops HP Envy and other laptops with Advanced BIOS, the function keys options can be configured so that it is not necessary to press and hold down the fn key. »
It worked for my problem BUT I almost didn't try because it is very misleading and very badly written.You see, it has never been necessary for me to hold and press the Fn button to use the default function keys (so why would I need to use the option above as written - I wouldn't). This makes you only believe that it turns on or off the ability to use the function keys to use the Fn key in conjunction with the 1 to 12 function keys - and not the function keys do not work. That would have helped me.
In reality, what it does, is change the function of these keys depending on whether you use the Fn key at the same time with the 1 through 12 keys or not. It acts as a switch allowing only the multimedia type function keys work if you press the Fn key first. I had to tell him to use the Fn key in conjunction with the 1 through 12 keys. In this mode when the keys functioned are affected without using the Fn key, they act like normal multimedia type function keys, no.(These types of key functions multimedia were introduced for multimedia keyboards a few years ago. They added extra functionality that I needed off. They were never the standard functions for the function keys on the keyboards. Recently, desktop computers and laptos started to add these functions to the keyboard by default.)
It's a good thing I played a bit with it to know because that is never written these things must be fired and replaced by someone who can explain all the s and outs of a much better task. It's very badly written garbage. It omits important information people need to know what actually makes the function under a permit and mobility.
Thank you. -
1. I have already installed windows 7 32 bit and then upgraded to 10 32 bit windows all drivers and all were working great.
2. After installing windows 7 64-bit and upgrade to windows 10 Pro. before you install the driver of quicklaunch 64bits, function keys did not work. but after installing the driver of quicklaunch, only the sensor ambient keys work but not working not properly.
3. as I have activate the ambient sensor. the light become very low and don't resolve with regard to lighting and after you turn off the room sensor the brightness of the screen become maximum. And when I press the funtion key low/high brightness. only appears this brightness bar is lowering down or up.
4. power supply do not work. Eve/battery power Saver/High Performance on the selection.
Please suggest a solution for this.
install the intel hd driver and restart the pc.
-
original title: Chess Titans
I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D. What's past and how to fix this. Thank you.
These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")
-
told to turn off the printer after ink system failure msg, but then gives a cartridge can fail to msg and said that the printer can be damaged if turned off.
The printer is brand new. I print a dozen test pages fine... haven't touched inks since installed first. When I open the cartridge access door, inks/heads move to the opening, so I can't reinstall the cartridges. Help!
The document here can help. You'll need temporarily ignore the message about not to turn off the printer...
-
All the function keys have stopped working.
Original title: function keys
My function keys have suddenly stopped working on my microsoft keyboard. I don't know I touched something worng. What should I do to fix this?Hello
1. what operating system do you use?
2 did you change on your computer?
I suggest you to follow the links and check out them.
Troubleshoot wired keyboards that do not or only the erroneous characters category
http://support.Microsoft.com/kb/258826
Some function keys or keyboard shortcuts do not work correctly on a computer that is running Windows 7
http://support.Microsoft.com/kb/975741
Keyboard shortcuts
http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts
Troubleshoot the incidents of the response to the mouse or wireless keyboard
-
How to define new function keys
Hello
Can someone tell me if it is possible to define the function keys?
for example, to save F10 or F11 - create folder.
Thank you
concerning
JerryHello
You can use Apex Builder Plugin for quick access keys.
http://builderplugin.oracleapex.info/
Kind regards
Patel Kartik
------------------------------------------------------------------------
http://patelkartik.blogspot.com/
http://Apex.Oracle.com/pls/Apex/f?p=9904351712:1 -
Display brightness with EliteBook 8460p function keys
I'm having the same problem with my brand new 8460 p which was much discussed here: the brightness of the screen cannot be adjusted using the function (fn + F keys) then under Windows. In other threads, the problem has been resolved by installing the latest drivers for chipset (which was not provided by HP), but in these discussions, the computer was an earlier model. 8460p has the new QM67 express chipset and currently I use the latest drivers for it (according to the website of detection of intel).
So, does anyone have a solution how I might be able to fix this annoying little problem?
I'm running a new installation of Windows 7 Enterprise 64-bit with all the latest drivers.
Hello
The FN keys are not directly related to the chipset. Try to reinstall the following driver: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5056942 & swItem = ob-96404-1 & prodNameId = 5056943 & swEnvOID = 4060 & swLang = 13 & taskId = 135 & mode = 3 .
Also, install HP Support Assistant: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5056942 & prodNameId = 5056943 & swEnvOID = 4060 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-97618-1 and check for updates.
Best regards
Andrew
Maybe you are looking for
-
Version of Thunderbird: 24.5.0 When I press on delete key, or click 'delete' button, nothing happens. I have to click right button of the mouse on the mail, select "move worms-> local directory-> trash ' to delete. '.
-
Hello. I came here for advice how to store data. What I'm trying to do is to take the gains given by my DAQ and store all in a table as it is acquired in an organized manner (3-columns, with a time stamp.) So far, I looked at writing text .vi and wri
-
HP Envy: question of processor compatibility
I have a desktop HP h8-1534, AMD 6 hearts FX-6200 3.8 GHz, 8 GB of memory MOB is M3970AM-HP (Angelica2) by type of Gigabyte Chipset AMD 970 and Socket: AM3 - b. I can it switch to a FX 6300?
-
DEP on Telechareger Vista installation I Tunes
When tried to connect I pod touch and I pod computer no longer recognizes the. I tried to uninstall itues, repair of the air etc. with no luck. so now, try to DOWNLOAD i tunes DEP protection comes up.never had a problem before. The last version of i
-
I got a so-called windows services call, to solve the problems they had received through error reports. I was instructed to enter an address in the term to start the process, but I did not trust the call. Was - this legitimate? Original title: window