Matrix Revolution Cam not recognized on my Satellite M40

Similar Questions

• New DVD drive not recognized on my Satellite Pro 4600

  Hi all

  I recently bought an engraver of DVD in NEC ND-6650 nine.
  This drive is NOT recognized by my Satellite Pro 4600 at all - neither Windows 2000 nor in the BIOS (v 2.60). BIOS updates higher than the 2.60 version are not provided.
  Does that mean I can forget about using the new writer in my old notebook?

  Thank you and best regards,

  Nils

  Hi Nils,

  I suspect that your new drive may be not be compatible with your laptop. Like all scanners to your new drive will be configured as slave or master (or CSEL possible), and this configuration should match your laptop.

  Usually your hard drive is configured as master on IDE channel 0 with optical drive is the slave on the same channel device. However, you may find that your optical drive is configured as master on the IDE 1 channel.

  Normally the setting is preconfigured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure they are the same.

  Kind regards

• SD not recognized on the Satellite A100-787

  Although the card slot recognizes the memory stick from Sony, the SD card is not recognized at all. I tried the card on the other computer and it worked fine. The driver for the card slot works well.

  Any ideas?

  Sorry, but it is not easy to tell what can be the problem. What is the capacity of this SD card? You have produced high quality or some unknown manufacturer SD card?

  If possible, try to get the second SD card and test how it works with your laptop Satellite A100.

• It is not recognized on Toshiba Satellite M70-169 Web site

  Hello
  I have a laptop TOSHIBA SATELLITE M70-169
  I wanted to update my drivers, so I logged on the TOSHIBA site.
  The problem is that my phone is not listed on the site, there are * M70-168 * and * M70-170 * but not * M70 - 169 *.
  I tried the recognition by serial number, result: DO NOT RECOGNISED

  I tested the autodetection, and here too, the result was: DO NOT RECOGNISED.
  I am surprised that my laptop is not recognized on the official website of TOSHIBA, while I had bought in a store.

  Can someone tell me if he had the same problem and give me directions to upgrade my laptop?

  Thank you

  Satellite M70 is old enough laptop model, and I can imagine that auto detection tool doesn't properly work. Your laptop is the model European and part PSM70E number (very important for research).
  In any case, you can find all the drivers or updates manually. Follow these steps:

  Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  Click tracking options:
  Type of product - ARCHIVE
  Family - SATELLITE
  Series of products - M SERIES SATELLITES
  Model - SATELLITE M70 (PSM70)
  Short model No. - PSM70E
  OS - operating system

  And all of the available stuff appears there.

  If you have any other questions let us know.

• Drve DVD is not recognized in Windows - Satellite P25

  Hello
  IM the owner of the satellite p25 last night somehow got my pirate pc sience then im trying to reinstall my operating system
  but the main problem is that my bios recognize not my dvdr (uj - 830 b) in windows I can see, but I'm not going to see in bios, any ideas how can I boot from a dvd to reinstall my windows?

  Hello

  Why are you suggesting that the drive is not recognized in the BIOS?
  Have you tried different options to boot from the CD?

  Usually if you press the C key immediately after starting the laptop, you should be able to boot from the disc. In addition, you must change the boot order in the BIOS.

  Have you tried to boot from various records as the original CD of Windows?
  Maybe your first CD is corrupt and that's why the drive cannot start.

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• Battery is not recognized on my Satellite C50D-A - 13 G

  Updated to win 10. Battery not recognized, seeing not on battery, operating only with power supply.
  Tried to put up-to-date, but lost the Toshiba PC Monitor health.
  Help!

  This means that battery is recognized properly if you are using the original operating system that you got with your laptop?

• TouchSmart 520: Camera not recognized

  I had my Touchsmart for 2 or 3 years now and have always used with Google Photos (Picasa) for edit and download. I first used a Canon EOS 400 d and a couple of years, upgraded to a 7 d. All were working well.

  Last week, I returned from vacation with about 1,000 pictures on my camera and my Touchsmart plugged the cable of the camera as usual, but it does not recognize the camera. She did little to sound a device makes when something plug into a USB port, but would not see the camera. I looked in the Device Manager to see if all the indicators showed ofr questions USB, none was.

  I restarted the Touchsmart, always the same. I removed the two external HARD disks always the same so that the camera was the only thing that connected, I tried the camera cable in all 6 USB ports, the same. I tried another cable, the same thing. I then tried a card reader with the CF in this document card, initially the same. Then I had some weird problems with the PC it recognized as an external drive but showing some strange characters in the view, but as soon as I tried to access the missing drive.

  I looked to see if there was a specific driver for the 7 d, but there is not, then I downloaded the Canon EOS s/w utility and tried to see if that recognizes the camera but it didn't.

  I jumped, then the CF card in the camera to find that the camera now showed the map in a vacuum; You can imagine how I felt thinking I had lost 7 days of vacation photos! I tried on the Touchsmart once again and it was the same thing, so I took a few pictures and they have now read on the camera but it was all that was there. I accepted that I had lost all.

  Last resort, I plugged the camera on Asus laptop, W8 for my wife and it recognized the camera and I downloaded on his laptop, then used a HARD drive them to get to the mines.

  I then formatted the card in my camera and tried CF in the Touchsmart, still does not recognize it. So, I ordered a new card see That happened today, I took some pictures in the garden, plugged the camera on the Touchsmart and you guessed it, he still does not recognize. I tried to plug in the card reader and it shows up as an external drive, but as soon as I plug the inside CF card, it is the view.

  Therefore, I hope that someone out there can help as I don't want to have to go through the process of loading on my wife's cell phone photos, copy them to a HARD drive, and then loading them on my Touchsmart whenever I have to deal with pictures.

  Hi again botty1963,

  Thanks for the quick response!

  Because your computer is not able to recognize the camera from a previous restore point, please call our technical support at 800-474-6836 for your desktop computer repair options. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  I hope this helps!
  
  Concerning

• SX20 camera not recognized

  Our telepresence PrecisionHDMC 2.5 x camera is no longer recognized by the SX20.

  The camera itself shows a blinking white light and it seems to be stuck trying to adjust. He clicks on 8 or 9 times, waiting a second or two, then on again. The electronic web, diagnosis show the camera like:

  ERROR: Selected input Source video

  No video signal received on the configured video source (video HDMI [1] 'Caméra')

  The logs show:

  May 18 15:54:14.054 a8 appl[1677]: 18790.20 VIDSRCCTRL-0 I: HDMI format change vidIo event - [email protected]/*  */, src 0
  May 18 15:54:14.055 a8 appl[1677]: 18790.20 VIDEOLC-0 I: VLC_readySignalSourceEvent port:HDMI 1: no signal
  May 18 15:54:14.056 a8 appl[1677]: 18790.20 VIDSRCCTRL-0 I: HDMI format change vpss msg - [email protected]/*  */
  May 18 15:54:14.056 a8 appl[1677]: 18790.20 VIDSRCCTRL-0 I: Send format change msg from HDMI to requester - [email protected]/*  */, src 0
  May 18 15:54:14.056 a8 appl[1677]: 18790.20 VIDEOLC-0 I: Received SourceFormatEvent from video link 1 ([email protected]/*  */, unknown type, timings not found) in ready state
  May 18 15:54:14.275 a8 appl[1677]: 18790.42 CAMERA I: CamVisca: ReconfigureAll
  May 18 15:54:14.276 a8 appl[1677]: 18790.42 CAMERA I: Keeper::getCamera: camera -1 unknown

  The version of the software is the recommended and running systemtools camerarescue makes no difference... There is another thing to try to fix the camera?

  If the camera is just clicking and don't move does not correctly, it is likely that the camera has stuck, either accidentally, or by a person moving by hand for the CMV align properly inside.

  You could try rotating the camera manually to try to get back on the track, or you could do a RMA number on the device through the TAC.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Fuji ax200 camera not recognized

  Have a new Dell laptop with Windows 7. Connect the camera - get usb on the screen of the device. No recognition by a camera assistant, or workstation, i.e., no camera 'reader' does not appear. Can take out the memory card, plug in and get the pictures in this way in windows explore. Not nice!

  Hold the camera recognized and I'd love an identical to the Assistant Assistant scanner and digital camera & XP.

  Any help is appreciated!

  Hi Bill,

  I see that the camera is not getting recognized. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. are you able to access other devices usb on the computer?

  Method 1.

  Connect the camera to a different computer and check if the camera is detected.

  Connect another device usb on this computer and check if the device is detected.

  Method 2.

  Connected to the camera and run a hardware troubleshooting to verify.

  To open the convenience store follow the given link: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 3.

  You can update the camera driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/is-IS/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Refer.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Web Cam not recognized since the upgrade to Windows 7

  I've recently updated my Toshiba Satellite Windows Vista to Windows 7. Skype now does not recognize my web cam. How can I fix it?

  By getting the win7 drivers and Tosh photo app supports, specific to your model, they provide win7 drivers, if it's not vista drivers usually work

• Module of RAM not recognized on my Satellite Pro A60

  Hello
  I have a Satellite Pro A60 and recently bought a RAM of 512 MB memory upgrade.
  I have fitted on the correct port, however, there does not appear to be be achnoledged as being there.
  Can someone help me?

  [Edited by: admin August 31 05 19:02]

  Hi Robert,.

  I guess your A60 has two RAM ports, then I suggest that Exchange you the two RAM modules autour to check if the port rather than the modules itself that is the source of the problem.

  I hope that you took of anti-static precautions before manipulating the new RAM module. They are easily damaged by a discharge of static electricity.

  HTH

• DVD is not recognized on my Satellite P100

  Just installed windows 7 on Satellite P100, now, do not recognize the DVD drive?

  Can you please use more than one phrase to describe your problem?

  DVD drive in the Explorer Win State?
  DVD player in the State of the Device Manager?

  Have you noticed this problem after installing Win7 or later?

• It is not recognized on Toshiba Satellite L505-10V support site

  Hello

  Two months ago I bought the Toshiba Satellite L505-10V, but my laptop can t be recognized on the Toshiba support site.
  Product PSLS3E-01Q014Y4 number. Does anyone have similar problem?

  Thanks in advance!

  Concerning

  Its an

  Hello

  Maybe the auto detection doesn t work properly on each laptop

  If you want to search for drivers & downloads I would recommend research yourself. So follow this:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Now you can search for your laptop and you will find the drivers if you need! ;)

• CD and camera not recognized in the bios

  original title: cd and camera is not reconised in bios

  My camera and DVD disc does not appear in Device Manager or the bios

  A camera may or may not appear in the BIOS, but a DVD player should without a doubt. It seems to not have and be in need of replacement if the BIOS do not see it.

  writing in the new message: * e-mail address is removed from the privacy... *

  My camera and DVD disc does not appear in Device Manager or the bios