CD and camera not recognized in the bios

Similar Questions

• Hard drive is not recognized in the BIOS - Equium A60

  Hi hope someone can help. I have a Toshiba Equium EA60-173 and the hard drive is not recognized in the BIOS. When I remove the hard drive and put it in another laptop it is detected fine. I also tried another hard drive in the Toshiba and that does not work either. So I suspect the IDE controller has disappeared, but can I do to confirm this? I wish there was an option in the BIOS to force detection. I updated the BIOS but still the same.

  This laptop is only just out of warranty, so if it is the controller would I need to replace the motherboard? Are there other options at my disposal?

  Thanks in advance.

  Hi Neil,

  Unless there is some physical\problem with the cable/connector hard drive, then it is most likely that you will have a new mainboard for your laptop. I suggest you to contact an authorized service partner and ask them to check your laptop and give you an estimate of the cost of the repair. Then you can try to shop for less expensive alternatives.

  Kind regards

• Satellite A60 - replacement HD not recognized in the BIOS

  I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

  I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

  The recovery CD installs saying there no drive selected.

  Can anyone offer any help or advice on what I can try next?

  Here are some technical details.

  Laptop Toshiba A60-672
  old MK4025GAS (40gig) drive
  spare MK4026GAT (40gig) drive

  Thank you
  Phil

  > I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
  For me, it looks more like an overheating problem caused by the internal temperature.
  It is a typical problem if the cooling fans are clogged and that air can circulate properly.

  > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
  One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

• A SSD from OCZ Agility 3 disc works with a dv9700T? Mine is not recognized by the BIOS.

  I bought a 120 GB OCZ SSD Agility 3 disc to install in my laptop the dv9700T CTO.  The drive is not recognized by the BIOS when it is installed in the Bay of 1 or 2, but is recognized when connected via USB as a secondary drive.  The drive works fine in a different computer, so I know the drive works.  There seems to be a problem with the SATA (ICH8) controller.

  Someone at - it any information on that?  Would love to get the drive works in my laptop.

  Thank you.

  Lloyd

  If you have a HARD drive installed in the secondary Bay and the OCZ SSD in the first Bay, the dv9700t starts and works very well.

  Lloyd

• Satellite L100: CD/DVD drive is not recognized in the Bios or workstation

  Satellite L100 - 170 No.PSLA3E model 02501QEN under Win XP.

  The icon of the CD/DVD drive has disappeared from the desktop and is not listed in the Device Manager or showing in the BIOS.
  There is power to the drive and the tray ejects OK
  I tried to use the ease of adding new hardware in the Control Panel, but it does not list a CD player.
  I removed the disc and then re - it sitting, but it made no difference.

  I used the restoration of the system for the last available date 26 January 08, but it does not restore the CD player... and I have none, he worked at that time.
  I don't think it's a faulty drive, because he is picking up power and when you insert a CD, it starts as if she was about to read the disc, but nothing appears on the screen.

  The laptop belongs to a child with autism and all I can get out he is "I don't know" when asked what happened to the laptop.
  Sorry I don't have any other information.

  Can anyone help.

  Thank you

  Jan

  Well, usually if the CD/DVD drive doesn t appear in the BIOS or BIOS cannot recognize the ODD then chances are that the CD/DVD drive is malfunctioning.

  But the best way to check this is a new installation of the OS. You should try to boot from a bootable XP CD.
  If the laptop would be able to boot from the CD, then the material is ok.

• Satellite L50 - B - 2 8 - new SSD is not recognized in the BIOS settings

  Hello

  I just bought a new laptop Toshiba Satellite L50 - B - 2-8 and I also bought Samsung SSD 850 evo 250 GB.
  When I try to install the SSD drive rather my drive HARD, the BIOS show 'none' in the category of SSD/HDD (BIOS not recognize the SSD).

  Please help me.
  My bios version is: 2.00
  someone told me that I have to downgrade my version of BIOS to 1.2V and then the BIOS recognize the SSD drive, so perhaps someone here can send me a download link for version 1.2 of my model L50 - B - 2-8.
  Thank you

  someone told me that I have to downgrade my version of BIOS to 1.2V

  And who? I mean you are sure that this person was right?
  From my point of view of the few there is no reason why beginning version BIOS should recognize the SSD and the latest version of the BIOS is not...

  But BIOS v1.2 for series Satellite L50 - B - 2 8 PSKTQE there is no v2.0 (at this time) is the latest version and previous versions of BIOS are not available for this series.

  Also, I guess you must slimply check different SSD drive... it might be possible that the other SSD drive would be recognized correctly.

  By the way: I am owner of Evo 850 SSD drive and as I remember, I had to update the firmware of the SSD drive to use it correctly in my other laptop (not the Toshiba device)

• new drive HARD Seagate Barracuda not recognized in the BIOS

  Hello

  The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

  Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

  Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

  can someone help me?

  THX, David

  Thanks for all the support.

  It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

  THX and greetings

• my camera not recognized by the correction lens lightroom

  I have the Fuji x - T10, RAW files, works very well, but the correction of the lens is not aware of my camera and when I select Fujifilm is defaulting to X 100, if anyone can suggest how to solve this problem?

  Corrections of the lens for the XT10 are integrated and cannot be disabled.  If you disable the Corrections allow profile, you will see a message at the bottom of the lens Corrections box that indicates that they are used and if you click on the circle-i you'll see exactly what corrections are applied.

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• Web Cam not recognized since the upgrade to Windows 7

  I've recently updated my Toshiba Satellite Windows Vista to Windows 7. Skype now does not recognize my web cam. How can I fix it?

  By getting the win7 drivers and Tosh photo app supports, specific to your model, they provide win7 drivers, if it's not vista drivers usually work

• HP Pavilion dv7-6004ea: new SSD not recognized in the BIOS

  Hi I have a want dv7 and is currently using a 700 GB drive HARD However im upgrading to an SSD

  I bought a Sandisc SSD PLUS 120 GB, I cloned the HDD to the SSD, I see partitions

  in windows Explorer when im running HDD, but when I try to boot from SSD I get an error

  error code (3F2) I ran diagnosis but no result without error of ideas? Thank you

  If you use the Apricorn software and a usb cable to SATA it should work.

  I did it several times without problem, except when I got an SSD that was a problem.

  Replace the original hard drive in the notebook.

  Download the latest version of the firmware from the manufacturer to the SSD and install it.

  Once you have done this, try cloning of the OS for the SSD, reinstall it in Notepad and start on the SSD.

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj

• I recently bought a Canon 5 d camera SR and when I imported the photos taken in Lightroom RAW gave me the following message: "files are not recognized by the RAW format support in Lightroom (73)" what should I do?

  I recently bought a Canon 5 d camera SR and when I imported the photos taken in RAW, Lightroom gave me the following message: "files are not recognized by the inLightroom of support for the RAW format (73)" what should I do?

  Hello

  Looks like you may not have the latest version of Lightroom as the Canon 5 d R raw files are supported in Lightroom 6.0 and above (not in previous versions)

  Devices supported by Camera Raw

• WIN VISTA: After installing new drivers through the utility Dell to keep the PC to date, DVD not working anymore (and not located in the bios Setup)

  When starting, it not recognizing my DVD drive more.  I went into the bios setup and it does not appear in there.   I have to re - install the bios?  or ....???

  Hello

  If the drive does not appear in the BIOS, there is a hardware problem - either with the player, wiring,
  or the motherboard interface circuits.

  Check with a real computer store (the one that makes its own internal circuits and not of leeks and poster
  a Best Buy or other stores) or Support of Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.