Peripheral PnP USB - muted, is unplug sound when not touched, "device not recognized" or a malfunction, etc...

Similar Questions

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

  My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

  I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

  Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

• USB ports power your equipment, but not recognizing devices

  I started my pc yesterday (21/02/10) - for the first time since the incident of the blue death screen has resolved on 10/02/10 (see 'recent history of the problem' below). I got a screen that says "volume dirty cleaning in 3 steps" or something like that. Subsequently, the windows starts fine but the USB ports stopped working.
  

  All 3 USB ports are now fueling your equipment (confirmed by my laptop fan) , but none of them give me access to any external devices as my flash drives.

  Note: I didn't say "" do not recognize devices "and instead said"give me no access to devices "because when I plug in my flash drive, it is profiled as a material published by ususal Display icon at the bottom right of the taskbar." Of more when I try to eject the material, the flash drive appears as "Kingston Data Traveller". It's simply not let me access the flash player - instead when I click on the flash player icon (drive F :) it asks me to format the drive before using.) But then when I am trying to format it says that "windows cannot format the device."

  [Please note that the USB ports are all works perfectly between these two dates.] In addition, I did not any changes, hardware or software, recently. ]

  Recent history of problems (might be useful):

  I got a blue screen of death problem 2 weeks after I had installed Windows XP updated 09/02/10. I could solve this problem by uninstalling all the following patches: KB978262, KB971468, KB978037, KB975713, KB978251, KB978706, KB977165, KB975560 KB977914. (as suggested in the forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1)

  After that I do not start my PC, until yesterday. It is the problem of the USB to start.

  Hello
  ) not a bad answer, but a lot of work and you can make mistakes
  make a sfc/scannow, as indicated here that it will reinstall missing and corruption of files http://www.updatexp.com/scannow-sfc.html I also noticed in your answer "dirty volume in 3 steps of cleaning" is you have using a kind of cleansing software registry cleaner etc. Registry cleaners that aren't much good for the most part and they will mess up your computer...
  If you do not use a cleaner that get some anti malware software download and run
  I left and use http://www.malwarebytes.org/ please click the checkbox as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• Webcam stopped working says insert USB after that reinstalling but being not recognized help pleae

  I have a new computer, webcam stopped working, I reinstalled the software screen indicates it has been reinstalled ok but when I try to use the camera it says on screen no device connected to the usb. help please.

  Hello

  1. what operating system is installed on your new computer"? XP, Vista or Windows 7?
  2 do you see anything unusual (yellow bang) in Device Manager?

  Assuming you are using XP (because the thread is in the XP category), I suggest you follow the steps below.

  Step 1: Use Device Manager to find the hardware changes
  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start and then click Run.
  Note If you are running Windows Vista, click Start and then use the search box.
  b. type devmgmt.msc, and then click OK. Device Manager opens.
  (c) in Device Manager, click on your computer so that it appears highlighted.
  d. click Action and then click Scan for hardware changes.
  e. check the USB device to see if it works.

  Step 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
  b. click on the Hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers.
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

• USB printer (HP Laserjet 1012) is not recognized. Help, please.

  It is urgent, please!

  Hello TximasBala,

  Thank you for your message.  To clarify, when you say that your printer is not recognized, do you mean that when you plug it in via USB it is not or not you can not install the printer?  If the printer does not appear after you have connected to your computer, try another USB port on your computer.  If the driver is the problem, you can click HERE for the latest print driver.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Sound card not recognized by windows server 2008 r2 on h8 1120

  Hello

  I installed Window server 2008 r2 (x 64) on my new h8 1120it

  It was a pain to find all the drivers and install it, but finally I did it!

  .. almost. Because my sound card is not recognized by the system

  If I look in Control Panel of-> system-> Device Manager all the drivers are ok (no point warning exclamation!)

  Under the terms of his, I have 4 audio devices by NVIDIA and 1 generic audio device high definition with a microsoft driver installed

  Any suggestion?

  Solved! He just needs to activate audio services
  Sorry

• HPE 8-1287 c: no sound when not installed windows 7 prof hpe c 8-1287

  I changed my home 7 to windows 7 Professional in my hp hpe 8-1287c and now I have no sound? I had a bit of her before?

  Tom

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  I understand that there is no sound after installation of windows 7 pro on the device.

  Please try and install the following drivers from the link below:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-HPE-H8-desktop-PC-series/5187019/model/5263291#Z7_3054ICK0KGTE30AQO5O3KA30R1

  The link above click on original driver and click on below one by one and download the same.

  Driver Chipset Intel original and Original IDT high definition Audio driver

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1

  Although I am an employee of HP, I speak for myself and not for HP

• Disable reactivate sound when I touch the volume control

  Hello, is there a way how to avoid auto reactivate when I change volume upwards or downwards? This is quite annoying... I installed Realtek High Definition Audio drivers, but did not find any checkbox to disable here. Thank you.

  This problem has been noted in 2009 during the development phase: http://www.windows7taskforce.com/view/3140. I guess he has not obtained enough votes to make the developers look at it again.  I really hope that a solution for this is rolled up in SP1...

• USB Flash Drive Digital Signature is not recognized

  During the summer, I discovered that there is a huge trojan virus on my Vaio laptop.  I had to buy phone support and Sony helped me catch the virus from my computer.  However, now that I'm in College that I discovered that my laptop is unable to do the only thing I need to do - recognize my flash drive.

  When I plug ANY flash drive into the USB port of no matter WHAT, he did not recognize.  I get this message: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  When I try to update the driver software it says that it is up-to-date.  I tried the thing support page of this says Sony (https://us.en.kb.sony.com/app/answers/detail/a_id/31399/p/48903%2C49902%2C71535%2C71585/c/65%2C66/kw...) where you configure the Local Disk Manager to start automatically and I do not have a local disk on my computer management.

  Is there a way to get back or get my USB key to work without the Disk Manager?  I really need this to get fixed!

  Here is the info on my laptop if it helps:

  OS: Windows 7-64 bit

  Model: VPCEH3MFX

  I haven't downloaded or modified software since they fixed my hard drive since the virus, I don't know if maybe the person who fixed it has removed this feature accidentally or something.

  Thank you so much in advance!

  Hi kendall__bryant,

  Please try to reinstall the usb drivers using these measures or these steps to solve the problem.

  Nick-

• Windows 7 printer and HP1120c using gigaware usb, a parallel printer cable is not recognized by plug-and-play

  I can't get my printer recognized by plug-and-play.  I have installed a printer manually, but still can not get to work.  All boards

  Hello Kirk,

  I'm not sure what you mean by "manually installed", but you need a print driver for the printer recognized by Windows. Go to this page to download the driver you need for whatever version of Windows you have: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=14497&locale=en_US&taskId=135&prodSeriesId=25522&prodTypeId=18972&lang=en&cc=us .

  Once you have downloaded the right print driver, I let the computer do the installation.  NOTE: you may need to completely uninstall what you've done "manually" so that the correct driver is working correctly. See the HP Web site for more information (I'd do it, but I do not know what operating system you have and its depth of Bit (32 or 64)).

  Post here if you need further instructions or assistance (be sure to include your OS and Bit depth). Let me know how you fare.

  Kind regards

  BearPup

• HDD USB not recognized as "physical1" when creating the new virtual machine

  Hi all

  I wanted to create a new virtual machine, and I wanted to use my USB as a physical drive.

  But Workstation shows me "physical0" which is of course my drive internal.

  I tried USB pen drives. They are not recognized either.

  This somehow is no longer supported? I would have that it would be possible to use USB external HDD as the physical drive to a new virtual machine.

  you have installed VirtualBox?

  If so, you can try to use the virtuaklbox command line tool to create a descriptor of rawdisk for this disc.

  say diskpart on this drive? -It is "online"?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• MacBook Pro not recognizing the Cougar USB install

  I have a Macbook Pro 5.2-17 "retina display. I replaced the hard drive and I am installing Mountain Lion. The hard drive is not an SSD. It's a 500 GiB Western Digital SATA, partitioned with TPG and JHFS +.

  I started by installing El Capitan, because that's all I had. The installer of El Capitan is on an external USB drive that is partitioned. When I boot using the down Option key, the C key or command-R, the installer of El Capitan is recognized. I installed El Capitan, created an installer of Mountain Lion on a different partition on the same external USB drive and erased El Capitan the internal hard drive. When I boot on the USB setup of Mountain Lion is not recognized. Setup of El Capitan is recognized correctly. Why not available in boot manager during startup? When I got El Capitan installed, the two partitions have been recognized very well when I plugged in the USB. Both were mounted and appears on the desktop. So I know that the problem is not the USB key, or 2.0 or 3.0, or the recovery partition because I erased the disc and the recovery partition is no longer exist. How can I get the installer of Mountain Lion to be recognized at startup?

  I did the command Option P R, NVRAM reset several times. No joy. The only partition recognized at boot time is the installer of El Capitan.

  I want to level back to Mountain Lion because it is less intrusive than El Capitan and will be more familiar to the person who will use this computer.

  Oh, and more than two elements. When I start the installer for OS X from the external USB drive, I gives me three options on where to install TO - install OS X El Capitan, install OS X Lion mountain and Macintosh HD. Therefore the partition setup of Mountain Lion is recognized, but not as an installer to start from. Although when I plugged in the USB port when El Capitan was installed he showed as an installer Mountain Lion.

  Also, there is NO option to choose where to install FROM. If I have two installation programs, I have two choices of installation?

• The mistake that the USB device is not recognized... Help, please...

  I am trying to connect to Simple external storage drive and once I followed all the steps (only 2) Windows XP gave me a message that the USB device is not recognized or it malfunctioned. I disconnected everything and tried again in another USB port and still had the same error. I know that is not the usb port of my computer because I have it plugged into a port that just worked. I have Windowx XP SP2. Any help on this would be appreciated.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I have a problem with finding a PnP USB audio device when you search for available audio devices.

  Hello.

  I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.

  The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.

  1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.

  In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.

  If I reconnect it however a new USB port, the device is not found. This is not good.

  2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.

  "Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.

  I'm under labview 2012 on windows 7.

  I am running the application as an exe to build.

  I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.

  Is there a way to reset the information usb labview during execution?

  Concerning

  Stephan.

  Hey Stephan.

  The sounds screws require a DLL located in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll

  Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:

  Dynamically that I can load and unload a DLL in LabVIEW?

  http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5

  I would also recommend that you provide a Kudo to this idea:

  Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/update-the-lvsound2-library-sound-input-sound-output-V...