Bridged SPA2102. Quick help needed-> No Internet at home!

Similar Questions

• Need help solving any internet connection. This happened to me several months ago and the supplier

  Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services.  I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:

  1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.

  Still under network adapter diagnosis; It shows the connection status of network as "connected."

  Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.

  I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.

  I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012

  Sorry... still with you... OK, we know that your network card is good and we know that your first post;

  1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.

  4. still under network adapter diagnosis; It shows the connection status of network as "connected."

  For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.

• Need quick help

  Hello

  I need quick help, the hp that we use at work has a background that someone else put (a new), I change back to the normal background but the picture is still on the menu so that everyone could see it or it could put it again. Someone knows what to do?

  (by the way I'm new to this forum so I could have failed by asking)

  Green as grass

  This solved so nvm but it's XP thanks for trying to help if

• HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  all I need is someone find my phone on the Sony site and that will be a pretty

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=home&PRODTYPE=24

  go to this site and to detect my model (vaio only)

• Oracle 11G install on Win 7 with PL/SQL Developer Help Needed

  Today is my first day with Oracle. I tried to install Ora11g since our network drive. I think that the installation went well. I also have installated PL/SQL Developer when I try to log in I got the following error see below.
  
  ---------------------------
  PL/SQL Developer - (not connected)
  ---------------------------
  Initialization error
  
  SQL * Net not properly installed
  
  
  
  OracleHomeKey: SOFTWARE\ORACLE
  
  OracleHomeDir:
  ---------------------------
  Ok
  
  After I did some research on the Internet I found this solution "go to tools > Preferences > options manually set 'Oracle Home" in the folder "Library OIC" and ORACLE_HOME to file oci.dll is located in ORACLE_HOME/bin/oci.dll.
  
  C:\app\user\product\11.2.0\Client_1\bin.dll < = I think it's my Oracle_Home
  C:\app\user\product\11.2.0\client_1\bin\oci.dll < = is my OCI library.
  
  When I apply a thse 2 ways I get the following error.
  
  Initialization error
  
  Could not load C:\app\user\product\11.2.0\client_1\bin.dll «»
  
  OCIDLL to C:\app\user\product\11.2.0\client_1\bin.dll
  LoadLibrary (C:\app\user\product\11.2.0\client_1\bin\.dll) returned 0
  
  Can someone help me with this? /

  PL indicate which version of Win 7 - you need professional or superior - home versions are not taken in charge/certified, then things may or may not work as expected.

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16773/reqs.htm#CHDHGGFE

  HTH
  Srini

• Do I need an internet connection to play music from Apple?

  Hello, I will be visiting by air soon, I need an internet connection to enjoy the music, that I loaded into my Apple iPhone music Playlist? Thank you.

  Start here:

  Add music catalog to Apple's music to your library on your iPhone, iPad, iPod touch, Mac, or PC - Apple Support

• When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection. That I have. Any ideas?

  When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection. That I have. Previously, I was able to simply select, make drag & drop in a folder open access to change. Any ideas?

  When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection.

  Could something intercept Internet to iCloud photo library and cause delays? A firewall or Antivirus filter?  Have you recently installed software?

• Need help to install windows 7 Home premium on my mac.

  Ideas:

  • Need help to install Windows 7 Home premium on my Mac
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Installation of Win7 on a Mac has nothing to do with Windows Update. Please repost your question here rather: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Please can someone help, need password CNU9497P2C

  I have the same problem and its driving me crazy... I need the BIOS password because I can't access to this

  [number of Series edited by Moderator]

  Please can someone help, need password

  HP MINI CQ10

  Sweb try.

  e9lovox27e

  3rd letter tiny L.

  4th and 6th letter lowercase o.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• help to connect to the internet at home?

  I have comcast cable internet at home, but my computer (Dell, windows XP) cannot connect to it. The Cable Guy was able to connect on his Dell computer, and comcast tech said that the service was very good, but the IP address of the connection shows that my computer has tried to find a router (it was connected directly to the modem).  What can I do to get online?

  So, you are not using a router and the computer is connected with a wire directly to the modem?

  1 - Go to network connections and right click on the LAN/Internet connection, and then click Properties.

  2 - highlight (click on) Internet Protocol (TCP/IP), and then click Properties.

  3. If your ISP says allows you to use a specific IP or DNS address enter in the appropriate box, if they gave you any set address the IP address and the DNS to get the addresses automatically.

  John

• HP Pavilion g6-1201tx Notebook: I need my windows 7 Home Basic recovery copy

  I lost my drive recovery House pre installed base of windows 7 for my product mentioned above, I need my product software Home Basic windows 7 please help me.

  MK93

  Hello;

  Let me welcome you on the HP forums!

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.

  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC. They store any long recovery media for older PCs.

  You can try to contact the HP customer directly, using the links below, to see if you can order them if:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  If you have difficulties to find a phone number, then try: 1 (800) 474-6836

  If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• CQ60 Notebook: my computer hp cq60 laptop does not connect to internet at home

  Is no longer, my laptop HPCQ-60 will connect to the internet at home.  I can connect everywhere else, I'm going without any problems.   Using the ethernet cable to connect, but it doesn't work now, too.  Have seen previous assignments showing the same problem.  It seems to be a driver update the solution, but the link provided in the response, apparently is no longer active.

  @kg88

  Assuming that you are still able to connect to other networks wireless without problem, which means that the adapter and the driver is good; If not then try to reload the driver FRO m the support page:

  Compaq Presario CQ60 - 215DX Notebook PC - software & drivers

  After that, the best thing would be to forget this network and recreate the connection, at least as a starting point.

  Forget a network (Windows Vista)
  1. start network and sharing Center.
  2. in the pane tasks, click on manage wireless networks.
  3. right click on the connection that you want to delete and then click on remove network.
  4. in wireless networks handle - warning dialog box, click OK.
  5. the connection is removed from the list of wireless connections that you can view or edit.

  Then browse to the next page, and the other things to try cities then.
  Troubleshooting wireless network and Internet (Windows Vista)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an Ethernet on this router:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

• Cannot get on Internet at home

  I have two laptops at home, the two Dell, same system and configuration.  Initially, they both had McAfee on them.  Now we have McAfee and there your software.  The problem is one of the laptops will not get on the Internet at home.  I can get into any other thing but not at home.  The other laptop has now no problem.  Any suggestions?

  I move your message to the Windows forum for networking topic.

  The only impact of MSE would have on the PC it is installed on networking issues would be if you do not have to completely remove McAfee using McAfee utility software to delete linked from here:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  It is not likely to be the problem, however, given that the PC can access the Internet when docked elsewhere.

  My suspicion would be a defective router or misconduct. You have rebooted or power cycled the router? Do you have confirmed that your ISP is not having a problem in your area assuming that cable or DSL is your connection at home?

  -steve

• I need to upgrade Windows Home Edition SP3 to Windows Professional SP2.

  I need to upgrade Windows Home Edition SP3 to Windows Professional SP2.  I have the CD SP2 Professional.  I need to remove SP3 so that can perform the update.  How can I do this?

  I ask why you "may need to be upgraded" Win XP (I guess) professional?

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  NB: If your computer came with WinXP SP3 preinstalled, you can not uninstall it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need A Windows Xp Home Ed Disk, how do I get one?

  I need a windows xp Home edition disc.

  How can I get a?

  On Wednesday, February 2, 2011 23:40:02 + 0000, Angel2011 wrote:

  I need a windows xp Home edition disc.

  It is very difficult, because Windows is no longer supported. You can be
  able to buy a copy of a place that still has one in stock, but be
  very careful; for example, if buy you one from someone on eBay, you
  will probably get a pirated copy cannot be activated.

  Ken Blake (MS-MVP)