Problem with Aspire-e1 - 571g very bad!

Similar Questions

• Problems with aspire switch SW5-012 10

  New to the community. Just bought an Aspire SW5 - 012 Switch 10. Upgrade to Windows 10 before use. We use Office 365 with Onedrive for storage. After a week, the machine connects to the wifi, but not the internet. I ran 10 Windows diag on connection and got "wifi is not the valid IP configuration". I could get it to make the connection if I went to the command prompt and did; ipconfig/release and then ipconfig/renew. I discuss with Windows 10 tech, to see if problem with Windows. He clearly had me Winsock, Tcp, Int and reset. Nothing has worked. Then he told me to uninstall the network adapter driver and reinstall. Once I did, I can't go past media disconnected (State of the media). Everyone has problems of this kind. We have (badly) need this tablet to work.

  Problem solved! After posting here, I found a blog, Geeks in Phoenix, who gave the commands to reset the network card. I followed their instruction and it worked! We're back in business. How to reset the network adapter in Windows 10: go to the administrative level command prompt and run these four commands. netsh advfirewall reset, then enter. netsh int ip reset, then enter. netsh int ipv6 reset, then enter. netsh winsock reset, then enter. Restart the computer to complete the reset. I'm guessing that we had something change in the firewall settings, in the configuration of the adapter. The Windows 10 technician, that I have chatted with earlier, couldn't do that to me.

• WiFi problem with Aspire VN7 - 791.

  Hello

  I have a problem with my Acer Aspire VN7-791.

  I reinstalled Windows 8.1 and I have some problems with the wireless card.

  I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

  Then I tried to install the driver from the official site and with this one:

  http://www.killernetworking.com/support/driver-downloads/standard-drivers

  The system has detected the wifi card and now I can see the SSID of the network around me.

  But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

  I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

  My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

  However, I can still use the functionality of network hosted the wifi card, if this information could help.

  Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

  Thanks in advance for your help and sorry for my bad English.

  Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

  As a last resort, book your personal date and do a cover of the plant.

• problem with drive Intel HD 520 - bad resolution

  Hello

  I bought the HP Pavilion 13-s104ne model and I am facing problem with the resolution.

  some msg boxes are not clear, it looks like to scanned box, I am really very angry about this and I need a solution...
  I tried to unstall and install the driver but nothing changed...

  Please help me

  Medhat

  medmarai

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about resolution issues and wanted to help.

  Since it is a machine relatively new, instead of hurt for hours to fix yourself, why not just let HP fix it - for free!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Brightness problem with aspire switch 10

  Hi all

  I have a gene with a switch screen aspire 10.
  The brightness level is constantly changing. It is not dependend on the ambient light, because I turned off Adaptive brightness. (When I put a flashlight on the light sensor that does nothing).

  For example: sometimes when I switch between the metro and the desktop mode. Notable stage screens turns a bit more or less clear. It also happens when you watch movies, opening programs, almost always when the image changes.

  Does anyone know a solution to this?

  Kind regards.

  To resolve this problem, I did this.

  On the desktop, right-click. Properties of the graph. Power. I turned off the screen of the energy saving technology.

  I hope this works for you also.

  

• problem with aspire menu start v5-122

  Hi, I just bought this acer v5-122 a week ago and I'm still learning to use it. the problem is, it does not display a start menu in the screen is just blank. What should I do to return to the start top menu?

  Murray, my first reaction to take it back to the store while it is still under warranty.

  However, you can get to the desktop? Did you save the machine? If you can get to the desktop, install the free program of the classic interface to get a start button. Then do a scan in depth with your antivirus. Then install the free Malwarebytes program and do a scan in depth.

  If none of this works, you should definitely take it back.

• Thers been a slight problem with lightrooms speed, its very slow and every time I come back inside, he keeps asking for me to connect

  My lightroom was very slow for the last two weeks that I can't find the question .im wondering if you might know the problem? In addition, whenever I connect it always ask for me sigm again.

  Hi rileyt.

  You can disable the graphic processor of Lightroom preferences to correct performance.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  For the sign in question refer: Lightroom does not launch or closes automatically after the splash screen

  
  

  Let us know if that helps.

  Kind regards

  Mohit

• Problem with the new iPhone - iOS bad for the backup in the cloud

  Today, I received my new 6 iPhone.  When I try to configure the phone and download all my info to the cloud backup, I get an error message that says new phone is iOS 9.1 - backups from the old phone 6 (no longer works) are iOS 9.3.1 - so I'm stuck.  Happy to upgrade the software, but...

  I cannot go forward, and I'm nervous about losing all my data/images, if I choose 'NEW PHONE'

  Help, please.  I've been without my iPhone since Sunday... was so excited when it arrived today... now I'm going to lose my mind!

  Kim

  Set up as a new phone. Do not restore the backup. Then update to iOS. After the update, delete it (settings > general > reset > erase all content and settings.) After the erase operation, restore the backup to iCloud.

  You cannot restore a backup made with a new version of the iOS on a device that is running an earlier version.

• Problems with the restore points very limited available in the system restore

  I found that I can't go further than 3 days on the system restore points. I have noticed for some time and it causing problems. I can't go back to the previous month. Can someone tell me why?

  YES-open SR-glance left to SR parameters - click sur-put slider for max.

  min he won't give you a few days.

• Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

  My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

  I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

  Any help will be appreciated.

  Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

• Satellite U400 - 10L: problem with the start-up & reboot

  Hello

  Well I don't like much about the touchpad overheating but I have a problem. When I restart this mobo instead of activate after a reboot it stays black without any reaction only lower diods, dvd - rom and the display flashes (can't hear fan or hard drive).

  If I press the power button / stop all the icons of diod (ac, pwr, hdd bat) shine up just for a second and new (can't hear the fan hard drive or cpu) computer does not turn on. All this happened only when AC cable is connected to the power if I use just notebook power source battery boots and restart without problems.

  If I remove battery completely from the laptop, once more, I get the same symptoms (cannot start). And the saddest part of this story is the fact that I got brand new Toshiba U400 10 L to the seller and got a new.
  It has the exact same problem.
  As you all probably understand im crazy because in the last two days, I tried really everything, including the BIOS without flashing and the success.

  Well im not sure whats going on, but this could be the problem with the battery or a bad contact?
  Any ideas?
  I would return it back?

  Thanks much for the reply

  Hello

  The behavior of your laptop is really strange and I suppose it might be bound only to a hardware problem.

  A friend of mine couldn't t start the laptop connected to the AC adapter the power adapter is faulty. It was only possible to start Notepad using the battery, and only if the battery was not completely empty.

  I put t know if your AC adapter failures but the authorized service provider should definitely check out the laptop and accessory for laptop (AC adapter).

  Then call the ASP in your country and ask the technicians for later handling.

  Greetings

• Problems with my Satellite L500

  Hi all, I currently have a toshiba satellite L500 running windows 7, 3 GB of ram, 350 GB hard drive...

  It was working fine until a couple of weeks before, when my computor kept popping up message in the right hand corner down saying windows error, critical error, youre hdd is missing, lack of RAM etc etc, a window pops up telling me to do a scan of the system which I did and it came with all these errors very bad... He them pops up a dmemory calle program optimizer and told me to scan and do a Defrag... I did... and then the next Julien knew, the hard drive has disappeared from my computor, I couldn't access what on the office, but was able to open tab between pages, I already had. then it all crashed.

  I did a cover on mine, and the error seems to be fixed... but then would only work properly in safe mode. so I got a repairman who charged me $188, reformatt the entire disk, put on a copy of the full version of kapersky and office...

  the day after getting home, I noticed when I was typing things and the cursor would move on the page its own id end up typing in the middle of what id already typed, so frustrating! then the man tech suggested, I download a program called touchfreeze... and fixed it...

  now the last day or two, ill be working on my laptop and it starts just a black screen... and it will pick up when I press the mouse pad, or it will completely turn off and switch to "standby" mode...
  theres no parameters of sleep or hibernation, so somehow screensaver nothing... and as I said, it happens when laptos to use, approximately every 15 minutes and happens several times... any idea on what he could eb question?
  I'm sure other issues with my laptop and it just said it was a virus...

  Hey man you bomb us with all these questions, and your last issue is quite confusing.
  Before starting the discussion tell me a: are you using the Toshiba recovery image (OS original you got with your laptop)?

• Problem with Officejet 6500 has more wireless on my Mac running Lion

  I just got the Officejet 6500 has more. I was able to make it work with my HP PC Windows XP (would not work with the radio, but it's probably a problem with this computer - connected very well with USB). But I don't see the option to add it on my Mac (main computer) running OS Lion. I'm completely updated on Mac software. I see my other printer as usual (also a HP) on Mac.

  Tried to reboot several times. I looked on the HP site to various articles and it seems that I might need to make an update of the firmware on the printer, but when I downloaded the software (on the PC), my printer is gray and so wouldn't let me - or does not need the upgrade. Then. I can't see the printer on the Mac and don't know what else to do. Ideas? Thank you... Is the printer on my wireless network - I can not see the IP address and others.

  I don't really know exactly what I did - added to the printer with its IP address and manually the software (added name - I also had a HP update tonight for the printer software, but that only did nothing), then printing I tried and it still would not work.  I used the adjusted IP address, which I found on the dashboard of Verizon. And for some reason, once I put that in manually on the printer, it remained there, even when in desperation I tried to put it back the "detect network" setting. Sorry - but this is not quite logical or in the order.

  Also, I restarted the router, then the printer. Somewhere among all the things I tried, to my amazement, it finally worked! At first, I saw the IP address as the name of the printer (which I had entered it), and then he asked to be changed to the actual model. I did it and it now seems to work. Here, I could tell exactly what I did, but perhaps in what I wrote, you will get a glow and know WHY it worked?

  I wanted to thank you again for all the time you spent to try and help me get this working. It is really really REALLY appreciated and I definitely click the congratulations for you! Thank you very much!

• Problem with Binder

  There is something wrong with my hyperlink social media, when I publish my Web site that that work not, but they do not work in preview mode.

  It only my twitter I seem to have problems with. I'm very new with Muse and could really do with some help.

  Hi, you can publish the site to a temporary site of the BC for us to have a look on.

  Or if it's the Twitter feed widget displays do not, then you might want to check this.

  http://forums.Adobe.com/message/4725856#4725856

  Thank you

  Vinayak

• Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI

  Hi all, I recently bought a SONY HT-SS380 Home Theatre, and I tried to connect it to my Acer Aspire 5552-5686 by HDMI port. (I have Windows 7).

  My problem is that I have can´t set up the laptop to use more than 2 channels (stereo). I ve been looking around the internet and there seems to be a common problem with this computer, but I can´t understand why or how to fix it.

  I ve tried to install the latest Realtek Audio drivers, the Catalyst Control Center, some Audio HDMI of ATI drivers. I Don t know what else to try!

  Any help?

  Thank you very much!

  This isn't the audio chipset of this system, which I listed above.

  The audio chipset to send the data in 5.1 surround.  The HDMI port would support, if it was sent.

  It is not sent in this way, I listed above.