Broadcom is unable to upgrade my software

Similar Questions

• XPS 13 (9343) - unable to upgrade to Windows 10 - error 0xC1900101 0 x 30018

  I have a brand new 13 XPS, 9343 model with i7 processor and 512 GB SSD. I'm still within the period of 14 days, and I'm now seriously returning. I've never known such a load of nonsense trying to install any other piece of software.

  So far, and after many attempts, I was completely unable to upgrade to Windows 10. The first thing I did was to install all the Windows updates available for 8.1 (there were 79 of them), and immediately after that I started the saga to install Win10. Nothing else has been done to the laptop - no questionable software or USB devices (except the USB boot if necessary). It is in a State of cleanliness.

  -After the download via Windows Update, the installation procedure is INCREDIBLY slow (for example, it takes 36 HOURS to reach 42% completion - and at this point, it hits the error message). What the heck can he do?

  -J' also tried to create a bootable USB drive via the media creation tool. If I boot from the USB key and perform a "clean" installation, it works perfectly: it takes about 8 minutes total (which highlights how ridiculous the 36 hours). However, because it is a clean installation and not an 'upgrade', I find myself with a non-activated version of Windows 10 and I am asked to pay £99.99, I don't intend to do. I paid for the laptop on the understanding, he would get a FREE upgrade to Win10!

  -J' also tried using the USB key (but not the start of it) to perform the upgrade in place - this strikes the same mistake as Windows Update (and taking so long)

  -J' tried to uninstall all antivirus software, and disable all wireless/bluetooth devices before performing the upgrade - nothing of this aid. Because need me 36 HOURS per attempt, it is really not acceptable to try disabling things randomly in the vain hope that it might work correctly.

  When trying to upgrade (i.e. not), I hit an error message "Windows Setup cannot set up Windows on your hardware" or similar. During the recovery after the failure, tool configuration gives the 0xC1900101 error code 0 x 30018 and says it failed in operation 'FIRST_BOOT', the phase SYSPREP. Just make this error message cost me 36 hours of waiting (welcome to the future!), then it would be really helpful if someone could give me a definitive answer on what makes...

  Help, please! Auuughhh

  Hello world

  If you are affected by the issue in which your XPS 13 is not upgraded to Windows 10 and he is stuck or take several hours, PM me with your serial number.

  Thank you

• Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

  Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.

  N °

  (143905)

• iPad flashing constant Air... can't even thug off the coast.  Upgrade the software, but worked for a while.  Can't do anything else.

  iPad constant Air flashing... cannot even turn off.  Upgrade the software, but worked for a while.  Can't do anything now.

  MY husband fixed this problem by pressing power and home buttons.  Duh...

• Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions?

  Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions? It seems that microsoft Web sites send me in circles. Patches do not work either.

  Hello
   
  1. What is the error code / message that displayed when you try to install updates for your Windows Xp Service pack 2 computer?
   
  2. What are the steps of troubleshooting that you already tried?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Steps to take before you install Windows XP Service Pack 3
   
  http://support.Microsoft.com/kb/950717
   
  Step 2
   
  Cannot install Windows updates
   
  http://support.Microsoft.com/kb/555461
   
  see, http://support.microsoft.com/kb/906602
   
  Method 2
   
  If you still face problems, please start your computer in a clean boot to avoid conflicts with security and third-party software conflicts and try to install updates.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  I hope this helps.

• Cannot upgrade the software on the computer.

  Original title: software updates

  I have no record of my 'administrator' password and am therefore not able to upgrade the software on my PC. What should I do?

  Hello

  1. how many user accounts have your configured?

  2. from what account you are trying to upgrade the software?

   

   

  To keep track of the workaround section below:

   

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

   

   

  Enable built into account admin and look for the question:

  a. click the Start button, and then type cmd in the Search box.
  In the list of research results, right click on cmdand then click run as administrator.

  b. at the command prompt, typenet user administrator / Active: Yesand then press ENTER.

  c. type net user administrator , , and then press ENTER.

  Note: Please replace the tag with passwords which you want to set for the administrator account.

  Type exitand press ENTER. Disconnect from the current user account.

  Now you will see the built in Administrator account, log on to this account and try to create a new user with administrator privileges account and check for the issue.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Hope the above information is helpful.

• Looking for a Vista Upgrade Advisor software see if our XP Pro computer can get the upgrade of Vista * with out having to reinstall the software / programs *.

  where can we get this Vista Upgrade Advisor Software?  Anywhere, there is a link saying need us for this software - it's rather Windows 7 Upgrade Advisor...

  We want to upgrade to Vista without having to reinstall all the software/programs, set up users, etc., on this computer.

  This software "Advisor" we apparently will tell if we can do it.

  Hello

  Do you have an upgrade copy or a full copy of the Windows Vista product?

  Vista Upgrade Advisor in is no longer available for download.

  Check if your computer meets the criteria of minimum system requirements to install Windows Vista.
  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  If you want to keep your files, settings and programs, you will need to perform an upgrade installation. Before installing, uninstall any security (antivirus)
  and CD burning software.

  NOTE: You can backup all your data before moving to Vista to be a good side.

  You can check these links for more information:

  Upgrade Windows XP to Windows Vista:
  http://Windows.Microsoft.com/en-us/Windows-Vista/upgrading-from-Windows-XP-to-Windows-Vista

  Installation and reinstallation of Windows Vista:
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  Windows Vista Migration step-by-step Guide:
  http://TechNet.Microsoft.com/en-us/library/cc748915 (WS.10) .aspx

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to install the software on my new Surface RT nook study to access a manual

  I'm unable to install the software on my new Surface RT nook study to access a manual while I'll be away next week.

  "Nook" is in the Windows store, but not 'study of the corner. " Is there a work around to read my etext on my RT? I'm willing to try anything.

  Original title: nook survey application

  Microsoft them does not limit in any way: Nook is absolutely free to provide the study Nook Windows program, and encourage Microsoft to do.

• I have Dreamweaver CC15 and teach a class using a book written for the version CC14. I want to upgrade my software to go to the lower version.

  I have Dreamweaver CC15 and teach a class using a book written for the version CC14. I want to upgrade my software to go to the lower version.

  Hello

  Refer to the steps below, to get the previous version: -.

  http://blogs.Adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015.

  Hope this helps!

• I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  Yes.  and?

• How to upgrade the software on the cloud to adobe?

  How to upgrade the software on the cloud to adobe?

  Can I update all my software with one click instead of one?

  Impossible to find a page no matter how much I search for it.

  Thank you

  ~ Scott

  Hi Scott, there is no single click to update all applications Adobe CC, but you can go in the Adobe Application Manager to download the creative cloud app, which allows you to install new versions of photoshop CC, first, etc.

  So basically, you will always have your CS6 software, and it will install the software of CC next to him.  In this way, if one of your plugins have not been upgraded yet, you can still use CS6.

• Upgrading old software?

  Recently I factory reset on my Mac air book. I had to re install the operating system on it, but when I opened the computer is a really outdated version of os x lion. I tried the upgrade and nothing has changed. Then I tried to download a new copy, but the App Store was too old to do it. Before I reset I was running the latest version of Yosemite. Can someone help me please update the software if it the latest version possible. I don't mind spending money, I realize that I messed up this one.

  help is highly appreciated

  Tthanks

  I hope that you have a backup.

  If you were on Yosemite, then in order to install Lion, you should erase the SSD and install Lion through the recovery of the Internet or a Lion Installer.

  If you Yosemite on your MBA, OSX should be in your account in App store.  What keeps you from downloading Yosemite to replace the Lion?

  The last OSX is El Capitan, which you should also be able to download and install on your MBA by replacing the current OSX.

  Ciao.

• Setup is unable to install the software because there is no software, Huawei

  I use OS x version 10.11.3 and tries to install Airtel 4 G card on my Mac. I use a stick to mobile broadband Huawei E3372.

  When I try to install it, I got the following error. I uninstalled previous installed map software who was Photon + service

  I found some discussions online and also disabled the protection of the integrity of the system, but it did not help.

  Any suggestion on how to troubleshoot and resolve this?

  

  See:

  AirTel 4 G does not work after update for IE captain

  Airtel 4 G Dongle will not work after upgrading to OS X El Capitan

• ITunes is to be ridiculous. I updated my iPhone 6 s to the latest version of the software, 9.2.1 a week ago. Not perfect, no problem whatsoever. However, whenever I plug my phone into my Mac, Itunes wants to upgrade the software again. How can I stop this

  A week ago. I updated my iPhone to IOS 9.2.1 6s. The update was done with success directly on my phone via wifi.

  I had no problem with the software of the phone since.

  However, every time I plug it into my Mac Mini and open Itunes, now a pop up appears asking me to upgrade to the same version of software.

  I have no idea why this happens and how the hell I let itunes know that I've already updated?

  I have the iPhone 16 GB S6 with the latest version of the software: installed 9.2.1.

  Any help would be appreciated. Please note that I am a Luthier and build guitars. I'm about like a fish!

  Barry.

  A version update of iOS 9.2.1 is out to solve a problem with error 53 and replaced the sensors contact ID - if your phone is already on iOS 9.2.1 is without doubt the old version of it, not a new. As far as I know the new version will be only detected by iTunes from the computer, not directly on the phone in settings > general > software update.

• Unable to upgrade from Win98 to XP

  When one of my friends gave me an office with no hard drive, Windows XP upgrade CD and a hard drive that is not installed in the office.

  I installed the HARD drive in the desktop and install the new Windows 98 installation, it worked very well. When I tried to upgrade to Windows XP, it won't Cross and has a lot of compatibility problems. I installed the ASUS chipset and all the other drivers from the ASUS site before moving to XP.  He always stubborn won't let me update.

  I am unable to get the upgrade, and yet I am frustrating.  I wonder how can I "force" the HARD drive to accept the new update of Windows XP? Clones old HDD to new HARD drive work?

  The office is probably not OEM. It seems to me it's built pc. The motherboard is ASUS P4V8X-MX.  I kinda wish I could find commercial full Windows XP for under $ 20. :/

  Hi Deafbusta,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the issue you are facing problems with the upgrade from Windows 98 to Windows XP. I will certainly help you in this regard.

  I suggest you to refer to the help article and check if it helps.

  How to prepare to upgrade from Windows 98 or Windows Millennium Edition to Windows XP
  http://support.Microsoft.com/kb/316639

  How to install or upgrade to Windows XP
  http://support.Microsoft.com/kb/978307

  Taken Windows XP supported upgrade paths

  http://support.Microsoft.com/kb/292607

  Support for 98 was completed, refer to the article:

  Support for Windows 98

  http://support.Microsoft.com/W98

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.