broke 100 today woo woo

Similar Questions

• Second hard drive broke off today and after that reattching the XP Pro disc will read the current files.

  When you try to open the XP disc prompts you to format the drive.

  How can I get XP to recognize the current files without loseing no information?

  Hi FeedUsFajitas,
   
  -Is the hard drive is detected?
  -What is the brand and model of your hard drive?
  -What, exactly, is a transcript of the error message that you receive?
   
  Method 1: Check if there is a problem with the device.
   
  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 2: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• Canon Pixma Pro - 100 prints very dark

  I see that it is a recuring with the Canon Pixma Pro-100 problem, but nothing, I found an online help I ask and hope someone can solve this problem for me.

  Just picked up a Pixma Pro-100 today and installed on my iMac 27 "(Yosemite) 2011 with the latest drivers downloaded from Canon to be sure to have the website." I also checked the printer firmware but it's later to 1,100. Weather, I'm printing through Lightroom or Photoshop; by Canon Print Studio Pro, my garden image, or by LR / PS directly; with - or without PS as a manager of color; the prints is proving to be much to dark.

  I have to set an exposure of 2/3 in LR to be anywhere nearby to get the same result as on the screen. I am also careful to select the right ICC for correct paper profiles. My monitor is calibrated with a Spyder4pro and I also re-calibrated her during this process to see if that helped.

  Well. Long story short; the prints are dark. So I borrowed 2013 Spyder4pro MacBook Pro (Yosemite my wife) and installed the latest drivers from Canon. Once again; on this machine, the impressions are also to dark with about + 2/3 in order to correct the impression of something that looks like the monitor. The two screens can also be programmed to 30% brightness.

  I also have access to an Epson Stylus Photo R3000 and the prints of that much brighter spell.

  Unfortunately, I see that many others also have the same problem. Then; Here's the question. How can I fix it? Do I have to return the printer and get a refund? Because it's clearly not good enough.

  Thank you very much for your answers. But unfortunately, I have "been there, done that" on all of your advice.

  I go back on Monday to the printer and replace it with an equal Epson printer as I have only good experiences with this brand and the prints I get without using overtime to tinker with settings.

  It was my first (and last) Canon printer.

• Dazzle DVC 100

  Hello, I received my dazzle DVC 100 today and I downloaded the disc and stuff... I then plugged everything to record from my xbox. On all the programs I tried it does not work. (this is Windows 7 64 bit) Ive tried Ulead VideoStudio SE DVD and the program of the glare comes with. The Ulead detects the device as it is said Dazzle DVC 100 but when I try to record it says no signal input or something like that. I don't know much about computers so I understand not all change between PAL and NTSC (or what it is) and I don't know about the settings for this at all... I don't know what to do any suggestions?

  Hi Lavelle77,

  Check the link for more information on the device with windows 7 below, as well as download the required driver mentioned in the link below and check if it helps.

  Windows 7 and Instant DVD Recorder

  http://Avid.custkb.com/avid/app/selfservice/search.jsp?docid=351801

  For more information about how to configure the device, I would say that you contact the manufacturer of the device.

  Pinnacle forums

  http://forums.pinnaclesys.com/forums/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Concerned about the performance of the battery Ipod 6

  Hello!. Please tell me your thoughts on this because I have no idea about. I bought a new Ipod 6 a week ago. I think that the battery is not give the performance of desire. He's dead, and after a charge noticed that drain you very quickly. So I turned off bluetooth, reduces the brightness of the screen and wifi on when I used it. I loaded 100% today, and according to the battery report used for 1 h and 50 min. (audio, videos Youtube Safari 91% Config Kindle of 5%, Home and Lock Screen 3%, 1%), time to sleep 10: 00 and 9 min. and the battery icon displays between 50 and 60 per cent of costs. It is the average or do you think the device is defective? Thanks in advance.

  On the basis of messages as your battery life seems comparable to others. Note that % battery is not accurate on an iPod, then you can not go this way.

  The test is responsible for at least 6 hours and read a video. You should get 5-6 hours

• Battery does not charge AC760

  The modem is a little more than 12 months and is struggling to accept a charge. It will work occasionally but rarely. I have tried other chargers with the same result. Yesterday, I managed to get to 100% today that I got to 50% before loading, it stopped. Is this a battery problem or a connection problem?

  Looks like it's a bad connection. The battery may charge good if removed and fitted with a battery charger. Taxation leads all work fine with other devices. This could be a fault as it is the second to do that to me.

• Microsoft LiveCam Q2F-00001 does not, 64 bit.

  Well, I tried everything. their support module and literally never tutorial there are to fix this shit. People are pointing the finger at Windows 7 x 64... Bought this unit for us $ 100 today... What a shame. :(

  Hi John,

   

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What are the troubleshooting steps you have tried to solve the problem?

  3. you receive an error code or message?

  4. What is the exact model of the Microsoft Webcam number?

  Please follow the links and check with the question:

  Troubleshoot failures to find the new LifeCam hardware:

  http://support.Microsoft.com/kb/929087

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  For more information:

  Troubleshooting: Webcams:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

   

  Supported Microsoft mouse, keyboards, LifeChat, LifeCam & more:

  http://support.Microsoft.com/ph/7746

  Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

   

  I hope this helps.

• Not having the chance to disable PS on my computer crashed

  My computer broke down today and I do not have the chance to disable PS on my machine.  I'm going to have problems to install PS on a new computer?  Thank you.

  Hi Yuan,

  You can use the license on 2 machines provided that you do not use at the same time. If you get an error you can contact our support via the link below and provide the serial number.

  https://helpx.Adobe.com/contact.html

  Please post on the Adobe Forums.

• Satellite A200-WOO overheating - hight temp

  Hello

  I bought my computer in Australia. A model Toshiba A200 WOO, 2.2 GHz, 2 GB Ram and Core Duo and for the last few months, I noticed the laptop gets very hot. At some point, I put on low power when it's plugged in because it overheating randomly and just stops.

  But even at low power, the temperature will be about 85 degrees. Now, as I it comes have type that my hands are very hot to rest on the laptop and the touchpad is is as a heating unit. The fan never sleeps and I use the fan speed to monitor the temperature and the temperature is currently on Core 0 93 and 94 degrees on Core 2 and Im only running Mozilla Firefox, Notepad, Speedfan, and Windows Media Player.

  I read that the radiator is probably dust in there but my warranty is valid till if I really don't want to invalidate opening upward... I'M not sure if that is the cause, or is this something else. I always keep my own machine and its always in my room or in its coverage I don't see how he could collect the dust so. When I start a game after about 10 minutes, it gets really hot and turns off. When I feel the underside it literally burns and stickers are peeling.

  Any suggestion would be appreciated.

  Thank you

  Hi Mezzi

  Yes, the clogged cooling fans and bad air circulation could cause this high temperature and could lead to a point where the laptop would be closed automatically to prevent the equipment from damage.

  You should also know that all internal devices would go with optimal performance while playing a game and because of the dissipation of heat, the temperature would arise at a critical level.

  Therefore, it is really important to make sure that the vents are free and not blocked by dust and other objects...

  Anyway, you said that your warranty is still valid, and that's why I strongly recommend contacting ASP (certified partner) guys in your country and explain your mobile number.
  I'm sure that the technician can help you!

  Good luck and best wishes mate.

• SamsungRecovery user1.w01 user1.wcl user1.woo?

  Hi, I noticed recently that I have SamsungRecovery in my D drive that contains 3 files; User1.W01 user1.wcl user1.woo. Is this normal?

  I use Windows Vista on a laptop Samsung R60 Plus.

  Thanks for the advice/help.

  Kind regards

  Stuart
  PS thanks to Savan H for helping me to sort a previous issue.

  http://www.Samsung.com/au/support/main/supportSupportMain.do#.

  For all questions relating to the Samsung and its content recovery Partition, contact Samsung at the link above.

  It is their software, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• LR 2.6 - woo - hoo!

  A woo - hoo because the problem I always had with scrollwheeling (is that a Word?) that damage the scroll bars and scrolling not when all panels are developed (and now also present in the Beta 3 - LR) has apparently been fixed! At least it has escaped my various attempts to bring it that day.

  Thank you!

  You have completed a probably bug report? Here:https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• Thunderbird broke down! I downloaded Windows 10 last week and have had no problems until today...

  I download with Windows 10 success recently and everything worked very well including today that this afternoon, I had a Thunderbird crashed the message and can no longer receive or send emails! What happened and what I do to restore service?

  Please post a few crash IDS here.
  See https://support.mozilla.org/en-US/kb/mozilla-crash-reporter-tb#w_viewing-crash-reports

• 7 d Mark II with a teleconverter 1.4 x - WOO HOO!

  So, just a few weeks ago, I found myself in an interesting position - let me explain.

  I had a 60 d that I loved for the past 3 years.  But... I have a 100-400 f4 - 5.6 L that I also like.  BUT I'm also a 1.4 x teleconverter I sometimes still add the 100-400, for extra reach.  BUT, when I bolt on it, I lose autofocus-* beep! *  I do mostly photography of wildlife, particularly birds, and autofocus makes my life much easier.  I did my homework and I understand (as a physicist) what are the limits, but it is a HUGE thorn in my side.

  So, back to my "interesting position -" my best friend/cousin was a rebel, he did a great job with it, because he discovered photography about two years ago.  He was ready to upgreade, and I was able to upgrade, even thought I have didn't need of (at least, I don't think I need to).  So, as that action (selfish), I decided I upgrade and sell my cousin my 60 d for a symbolic price.  I did my research and decided that my next device would be a 7 d Mark II.  So, we moved to this topic - he ended up with a MUCH better device for a symbolic price, and I went on the 'learning curve' that I love so much.

  So, to shorten this (already too long) story a bit, I JUST found out that the 7 D Mark II actually allows the 1.4 X teleconvertor actually AUTOFOCUS with the 100-400! OK, so you must be in the 'focal point' or 'point central + 4 points that surround' modes, I don't care.  This allows me to do what I have to do, WITH autofocus.

  YAAAAAAAAYYYYYYY - thank you, Canon!

  Yes--

• Airport most convenient that the range extender today broke up after that put 7.6.7 at level

  I have two extreme airport connected with an ethernet cable, one for upstairs and one for down. One downstairs is set to extend the reach of the network wireless created by one on the floor. Also the one upstairs is configured in Bridge mode because I have a server that I use for DHCP and DNS, instead of using the airport for that. The server and the airport on the floor are connected to the same network switch.

  Everything worked very well under firmware 7.6.4. But after the upgrade to 7.6.7 and without changing any settings, now my network is terribly broken. No devices can connect to the wifi network, and the network interface on the server shows errors like "has received the package on eth1 with own address as source address" and "Null supervisors, receiver of broadcasting not ready."

  The problems went away by unplugging the airport down.  But this isn't a good solution.  I want to have both, and I want that they function as they did before.

  When you have airports connected by ethernet... YOU MAY NOT USE EXTEND WIRELESS.

  The result is the following.

  Server shows errors like "has received the package on eth1 with own address as source address" and "Null supervisors, receiver of broadcasting not ready."

  You create a loop where packets are going around and around the system.

  If you say you had it past 7.6.4 firmware and it was broken by 7.6.7 well, I can only say that he has never worked on any firmware with a switch or other device which is able to break loops.

  Return to 7.6.4 and see if it still works.

  I found that Wireless extend over 7.6.7 is more restrictive than the firmware as soon... I highly recommend 7.6.1 for it... as I can show 7.6.4 reproducible problems but it is also a case that former airports are losing just their WILL... I had success extend wireless who recently failed... and it's purely too big range... considering that it used to work properly. Which shows that the products are just slow decline.

  I also get numbers of the absurdity of airport utility that I still don't understand.

  for example. I got the link to work on a new Gen5 TC (refuses to bind on Gen4 TC)

  

  If I click on the unknown link, it shows a link 450Mbps speed which is impossible. The RSSI is also what you would get with the two devices within 1 foot of the other (30 cm) No 20 M through several walls and a floor.

  The end of TCgen5 by using the utility v5.6, I see the actual rate...

  

  The link is showing 54 Mbit/s and a signal-78dB which makes much more sense. Unfortunately the other end does not record again... and the value 0 for the noise is also wrong.

  Noise on the latest diagnostics wireless displays 0 for a lot of wireless.

  

  Something rotten in the world of the Apple to the end... What with the CCMM giving a total mess to Airport utility if people use it...

• 10.22.3 update wooing.

  Cannot use the address of Safari to 10.11.3 field update. Do not click or search. Anyone have this problem?

  Check this box (and similar) subject (s): Safari search field works do not since 10.11.3 updated