Browse the bugs of identifier

Similar Questions

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• My 6s keep thing on another site. Please advise me how to clean the bugs. Thank you

  My 6s keep thing on another site. Please advise me how to clean the bugs. Thank you.

  Hi Limkk1952,

  Thank you for contributing to the communities of Apple Support.

  If you are redirected to other web sites or see pop-up windows when using Safari on your iPhone, here are some steps to try first:

  On your iPhone, iPad or iPod touch, force Safari to close. To avoid automatically reopen all Safari Windows, go to settings > Safari, then click clear history, and data from the Web site. It also removes your browser history and cookies.

  Stop advertising windows pop-up and adware in Safari

  You can also try Safari settings by following the steps in web settings Safari on iPhone, iPad and iPod touch.

  In addition, if this happens when you are connected to a Wi - Fi network, try the following steps:

  • If someone set up your network, ask them for help. If you use a network in a business, school, hotel, store or other place of Wi - Fi, find an employee for assistance.
  • Try to connect to a Wi - Fi network in a different location.
  • Update your Wi - Fi router with the latest firmware and check that the router supports your Apple product. For more information, contact the manufacturer of your router.

  Of If your iPad, iPhone or iPod touch connects to a Wi-Fi network

  Sincerely.

• Developer SQL 3.2: Impossible to browse the java source into the base of

  Hello:
  
  I noticed a regression in SQL Developer 3.2 with respect to 3.1 (under windows).
  
  from SQL Developer 3.1.7.7.42 I was able to browse the java sources stored and compiled in the database.
  The 'Invisible', 'Source', 'Policies' tabs have been correctly filled. If I had to complain about something, the names of the classes were 'shortened' while I saw "c932e55e_PrintDebug" instead of "my/company/application/package/PrintDebug".
  
  I tested version 3.2.
  Now, the names of classes are complete, but the tabs are empty. I am also unable to recover the source of a class (as was in 3.1)
  
  This happens to other people?
  
  Thank you
  Andrea

  Hello Andrea,

  Thanks for reporting this. Looks like you will have to keep available alongside 3.2 3.1 for now. I logged a bug:

  Bug 14535076 - FORUM - REGRESSION - IMPOSSIBLE to BROWSE the JAVA SOURCE INTO THE base of

  Kind regards
  Gary
  SQL development team

• Work around the bug of 10.7 Lion Flash Player parameters

  Here are some steps that should help you:

  UI - display settings tab

  
  

  

  You should be able to change the hardware acceleration option when Flash Player is in full screen mode. Try the following steps:

  1. Open a YouTube video in the browser.
  2. Expand to view full screen.
  3. Right click on the video to call the context menu of Flash Player, then click "Settings" to call the user interface of the Flash Player settings. (Note that you must do this twice if the interface settings user is not called by the first click.)
  4. Parameters of the user interface must be clickable mode full-screen. Go to the view tab and try to turn on/off hardware acceleration. Click the "Close" button to close the UI parameters. (Note that this should be done during playback of video from YouTube).
  5. Switch to window mode. If you call again the settings UI, you can check that your previous setting in step 4. has been applied.

  UI - Privacy tab settings

  
  

  

  Settings on this tab can be bypassed using the tabs of the native Flash Player Control Panel camera and a Microphone.  See this video for more details.
  

  User interface - storage Local to the settings tab

  
  

  

  Most of the settings in this tab can be circumvented by defining them in the native Flash Player Control Panel storage tab, with the exception of set local storage limit.  A common case, you may encounter is the pop - up window "Local Storage" that is displayed if a website asks to store information on your computer.

  
  

  

  Unfortunately, due to the bug current that the effects of some iMacs, you can not click on allow or deny buttons. Escape temporarily this pop-up window, we can do the following steps in the native Flash Player Control Panel (NCP)

  1. Click on the tab "Storage" in the NCP
  2. Select "Allow sites to save information about this computer" If you want to allow the Web site to store information on your machine.
  3. Close the NCP and reload the Web site in the browser.  No pop-up window should appear.

  To change the local storage site settings follow these steps in the NCP:

  1. Click on the tab "Storage" in the NCP.
  2. Click on the button "settings of storage Site Local... ", a dialog box appears that lets you specify parameters of local storage for specific sites.
  3. For each Web site in the list, you can set 'Access to storage' to allow or block.

  To change the limit of local storage , we can use the Panel settings for recording Web site.

  1. Click on a Web site where you want to change the storage limit, for example, my.adobeconnect.com
  2. Move the slider to set the limit of storage for this site.
  3. Refresh the "website storage settings panel" in the browser for the settings to take effect.

  User interface - Microphone settings
  You should be able to change the microphone options when Flash Player is in full screen mode.  Here is an example of use of Google Talk (you should be able to do it with any Flash content full screen) .

  1. Start a Google Talk session.
  2. Switch to the mode full-screen chat.
  3. Right-click on the chat box to call the context menu of Flash Player, then click "Settings" to call the user interface of the Flash Player settings. (Note that you must do this twice if the settings UI is not invoked by the first click.)
  4. Now the UI parameters should be fully clickable.
  5. Exit full screen. If you call again user interface settings, you should see that you settings have their effect

  User interface settings - camera
  You should be able to change the options of the camera when Flash Player is in full screen mode.  Here is an example of use of Google Talk (you should be able to do with any content Flash fullscreen).

  1. Start a Google Talk session.
  2. Switch to the mode full-screen chat.
  3. Right-click on the chat box to call the context menu of Flash Player, then click "Settings" to call the user interface of the Flash Player settings. (Note that you must do this twice if the settings UI is not invoked by the first click.)
  4. The UI parameters should be fully clickable.
  5. Output mode full-screen. If you invoke UI settings once again, you should see you settings have their effect

  Now, this bug should be fixed with the 10.7.4 Apple operating system release.  Update your operating system, reboot and try again.

  http://support.Apple.com/kb/HT5167

• Search for and change all the bug after his conversion to Authorware 7

  A few months ago, we went from Authorware 6.5 to Authorware 7

  I have problems with a 6.5 converted to Authorware 7.0 file. I tried to convert the file again after the first compact 6.5 file. I tried it again after the Authorware 7.02 update, but still the same problem.

  The bug affects "search".

  If I get " : " and replace everything by ": " 

  i.e. get cites two spaces OR and replace by quote single space OR

  There is no problem of search and replace in 6.5, but version 7 search text 16 characters to the right of the correct text, it is not change because it would produce a syntax error.

  Using 'Find in calculation' correctly identifies the first occurrence of

  quote two spaces OR

  Another example, if I get a variable named Mode, the first, several items are correctly identified, but ultimately it incorrectly highlights text.

  I tried in both XP & Vista, with similar results. Obviously, editing is a nightmare, because of global change, I now by clicking next several times, check that the correct text has been detected before the election change the code.

  I copied and pasted the calculation containing cites two spaces OR, a spreadsheet Excel and got the Ascii code all 9000 characters. The lowest recorded value is 32, half, I expect a non-display less than 32 character could be the cause of the error.

  Could find no mention of this error on the forum, I contacted Adobe. They kept me 15 days pending then lift the query at a higher level. For two months, they have ignored every week queries asking what was going on.

  This was their response, if any.

  Monday, November 30, 2009 1:34:07 AM PST
  Hello Tom,
  
  Thank you for providing your information.
  
  We wish to inform you that there is something on the text in the
  calculation, as saved from Authorware 6.5, which is not Authorware 7
  as. The only way I found to stop this is to cut and rebonding of
  calculation script in Authorware 7. You may need to check that
  the find command is highlighted before you apply the changes, and when he sees a
  problem like that, you have to copy / paste for this calculation. We
  were afraid of us can't see another way to stop this, and like Authorware's
  is not developed, there is no engineering team we can point to.
  
  For additional assistance, please contact us at the Support Web Portal:
  www.Adobe.com/support or you can use the following on support options
  the Adobe Web site:
  
  * The user-to-User Forums where you can enter your problem or
  desire to see if another user of Adobe can offer advice. Access to this
  resource address www.adobeforums.com.
  
  * The Support Knowledgebase, which contains solutions to problems
  that occur on the assumption of the operating systems (<>) and products of <>).
  
  Thank you Adobe chossing.
  
  Abhishek

  I have never been a fan of Adobe, even before they took from Macromedia and abandoned Authorware. Their terrible support strengthens my opinion of them

  I asked Adobe if it is possible to convert in 6.5 (but no answer).

  Any suggestions?

  Looks like you have found the solution that could make the search and replace works for good. "Diving code", I mentioned at the top of the queue showme is a calc that is attached to the card. Open one of the showme files and double-click the = at the top left of the map at the top of the page. You can only paste a calc icon in your file. I'm not sure that your solution works for every situation... for instance if you replace the SPACE BACK by RETURN, then he could not correct the problem, if there are lines with several spaces at the end... Here again - maybe using GetCalc and SetCalc will be Authorware re - compile the Calc and fix the problems of every search and replace.

  Mike

• Unable to create the Bug DB link

  I tried to connect Bug DB at the apex. I tried the sql code next to connect using my credentials of the bug db but error previledge insufficient.
  
  CREATE THE DATABASE LINK "BUG. WORLD. "
  CONNECT to < user name > IDENTIFIED BY < password >
  Using "(DESCRIPTION = (ADDRESS_LIST =(LOAD_BALANCE=ON) (ADDRESS = (PROTOCOL = tcp) (HOST = CREATE DATABASE LINK"BUG. ")))" WORLD. "
  CONNECT to < user name > IDENTIFIED BY < password >
  Using "(DESCRIPTION = (ADDRESS_LIST =(LOAD_BALANCE=ON) (ADDRESS = (PROTOCOL = tcp) (HOST = dbs232 - crs.us.oracle.com)(PORT=1521)) (ADDRESS = (PROTOCOL = tcp) (HOST = dbs232 - crs.us.oracle.com)(PORT=1522)) (ADDRESS = (PROTOCOL = tcp) (HOST = dbs233 - crs.us.oracle.com)(PORT=1521)) (ADDRESS = (PROTOCOL = tcp) (HOST = dbs233 - crs.us.oracle.com)(PORT=1522))) (CONNECT_DATA = (SERVICE_NAME = bugap.us.oracle.com)))"
  /
  (ADDRESS = (PROTOCOL = tcp) (HOST = dbs232 - crs.us.oracle.com)(PORT=1522)) (ADDRESS = (PROTOCOL = tcp) (HOST = dbs233 - crs.us.oracle.com)(PORT=1521)) ((ADDRESS = (PROTOCOL = tcp) (HOST = dbs233 - crs.us.oracle.com)(PORT=1522))) (CONNECT_DATA = (SERVICE_NAME = bugap.us.oracle.com))) "
  /
  
  
  Please let me know how to link to Bug DB.
  
  Kind regards
  Subhash

  Aristotle,

  Your database user (schema mapped to your workspace) been the CREATE DATABASE LINK system privilege? It is not granted by default.

  If it's on apex.oraclecorp.com, just send me an email and I'll make sure that you get hooked up with this system privilege. I'll obviously need to know the name of your workspace and your schema name.

  Joel

• What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  I've never heard a backup report bugs, however if you are interested in, you can always restore the device as good as new.

• In one of my firefox browser, the header/footer margin setup parameter is inches, I need to change it to milimeter to inches. Your help is appreciated.

  In one of my firefox browser, the header/footer margin setup parameter is inches, I need to change it to milimeter to inches. Your help is appreciated.

  As far as I KNOW Firefox displays the metric or Imperial depending on the type of paper selected for printing. If you are using A4, you should get millimeters/metric.

• My Firefox browser is unable to browse the internet

  Hey there! When I use Firefox to browse the internet I just get a screen that reads "it works!" Thoughts? I'm happy to send a screenshot of the screen.

  It started when I installed the module for HTTPS Everywhere.

  Problem solved. Embarrassing, I simply relied on tools "Clear recent history" and all selected. It works fine now.

• PSAA9 satellite A100 - unable to browse the Internet

  Hello

  I reinstalled the operating system on a friends computer laptop A100, installation of WINXP pro.

  After I installed, I noticed that a lot of missing drivers so I scoured internet and downloaded most of them. The problem I have is that the ethernet connection seems to not work properly. I installed the driver on the toshiba site and hooked it up to a test network to my polytec.

  On this network to test an internet connection is available, but the laptop cannot browse the internet! I can ping other PC networking on mobile Internet sites and ping but cannot browse their IE. Other network PC cannot ping the laptop automatically obtained IP address.

  Any ideas what's happening?

  Hello!

  Have you tried another browser like Firefox? I don t use IE because Firefox is much faster and I can't get a large number of modules.

  In addition, you should try to disable the firewall on the laptop. Maybe it s blocks the internet connection or the internet browser.

  Last but not least try to use a static IP address. You can change this in the TCP/IP settings.

• Booklet 70CT: unable to browse the network

  I'm trying to connect my booklet 70CT to an existing LAN. I use a Fast Ethernet Linksys PC card in the booklet, connect a Linksys Wireless-G Broadband Router on a LAN port.

  There are two other computers connected to the router network OK. I did all the installation procedures in the manual of the PC card and everything seemed to be working normally.

  When I double click on network neighborhood on the booklet, I get a screen with "Entire network" in this topic. When I double-click it, I have a sign saying "Unable to browse the network."

  Help, please.
  Frank

  Hello

  I searched on the Microsoft Web site to some proposals of solution and found this:
  Unable to browse the network"when you click Network Neighborhood
  http://support.Microsoft.com/kb/260214

  This problem may occur if there is a key to logon automatically in the registry at the following location:
  EntVersion entVersion\Network\Real Mode Net

  It seems that you can solve this problem by deleting the registry location AutoLogon value listed in the section "Cause".

  Also check this:
  Network error (1222): unable to browse the network
  http://support.Microsoft.com/kb/170336

  Good luck

• HP 15-f003dx: robotic sound on laptop while listening to music and browsing the Internet

  Hello

  I have a HP 15-f003dx and I have problems with the audio driver. Whenever I watch videos or listen to music while browsing the Internet, everything looks like a robot, and it's really bad. I already reinstalled the driver, updated the BIOS and tried the system restore and reformatted. Nothing else has worked.

  Here are my specs below:

  10 64-Bit Windows Home

  Processor: AMD A6 - 5200 APU with Radeon HD graphics card

  8 GB RAM

  Audio: Realtek High Definition Audio

  I'm running out of options. All the solutions to the current problem would be great, thanks.

  Hi @REL1983,

  Thank you for the update.

  I'm glad that the store has been able to solve the problem for you.

  Execution of the troubleshooter is a step I have provided, if you agree that it is your problem, you would be useful to the community by choosing accepted the solution to enable other posters locate information with greater ease.

  Thanks in advance.

• Satellite A120 - loss of Performance after browsing the internet

  Hi all, Im currently new on Toshiba laptops, just got my first one. But this question is for my brother. There an A120 laptop with windows xp. His laptop is generally very well outside of slow down after browsing the internet for 5 minutes of the ish. Initially he sails very well, but then all of a sudden slowing down, but it's not just the internet, the laptop everything slows down, turning off takes a lot of time just like any other process. The internet works fine on all other devices, IE. other computers laptops, xbox, mobile phones etc. His ISP has confirmed that there is no problem with the internet.

  Anyone have any ideas? He has already reinstalled XP

  Who knows what's wrong there. Install CCleaner and clean OS every time before you turn off laptop.

  Might be time for a clean installation of the new OS if your brother use it for years.
  You know, we don t know what is preinstalled on it, which is running in the background and what personal configuration on this machine.

• How to fix the bug of 1970 on iPad mini 2

  How to fix the bug of 1970 on iPad mini 2

  It is not a bug. It is the result of a deliberate action by the user. However, some reported that the DFU restore, if it does not, then you must make an appointment at the Genius Bar at the Apple Store closest to him have supported. Apple is working on an update that will prevent users from doing it again. If you changed the date to May 1970 or earlier and he can't restart your iPhone, iPad or iPod touch - Apple Support