Brush the flashing arrow cursor cursor

What paint with the brush cursor flashes between the cursor size round brush with an arrow. The brush continues painting as it should, but the cursor blinks constantly between the 2. It is a Visual nuisance, but doesn't seem to affect performance. Anyone had this happen and is there a possible solution?

I'm on Photoshop CS6 (latest updates) on 2008 Mac Pro 3.1 with OS X 10.6.8.

We saw that on Mac OS 10.6.8 - due to some third-party plugins that should be updated and ex-driver wacom requiring an update.

Also, make sure you have the updates installed (13.0.3 or 13.1.1).

Tags: Photoshop

Similar Questions

Annoying hourglass constantly flashes along with the arrow cursor.

Original title: annoying hourglass!

Since a deep cleaning with Tune Up Utilities, I find that an hourglass flashes constantly along with the arrow cursor.

I also think now that the buttons do not always to react when clicked, although they will be later.

Everyone out there find this and I hope to have an answer?

davewilk5944

Dave has not been heard from in almost 3 years and since it's the XP community, and you have Windows 7, you can post your request in the community of Windows 7 which is here:

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7?tab=threads

And the advice of this KB article for this is terrible advice:

After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
1. Click Startand then click run.
2. Type msconfig and click OK.
  The System Configuration utility dialog box appears.
3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
4. When you are prompted, click restart to restart the computer.
If you do this, your system will be load and start own Service and component on your system, and it's very ulikely you want that to happen--unless you want your system to work not as yak squeeze.

After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins. Try to understand the problem. Can I try to reinstall? Problem is on flashing screen cannot do anything.

Original title: Windows 10

Hello

Thanks for posting in the Microsoft Community.

(1) do the Windows 10 installation process is complete?

(2) you are able to view the Windows 10 desktop?

You can check the help below article and check if it helps.

http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

To download an ISO image see the link below:

https://www.Microsoft.com/en-us/software-download/Windows10

To create an Installation media check out the link below.

http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

It will be useful. Please get back to us with the State of the question.

Thank you.

Bookmark shortcut does not work if the mouse cursor is focused in the version of the flash plugin.

I tried to open the bookmark panel shortcut [ctrl + shift + B] buttons when the mouse cursor is focused with the flash plugin. But it does not open. But I clicked on the page and he's trying again, he opens the bookmark panel.
Try the following link
[Example: https://learnable.com/courses/a-crash-course-in-mobile-web-design-195]

This may or may not be a problem.
It's just a suggestion...

This is a limitation of the works in Firefox.

If a plugin is developed, which makes this shortcut key is no longer so he treats all keys work.

You have to click outside the plugin, if you need to use a keyboard shortcut.

Arrow cursor freezes on the desktop to start OK in safe mode

Compaq Presario laptop. Windows Vista SP 1. Touchpad

My wife's cell phone goes through a normal startup and about 5-10 seconds after the desktop appears, the arrow cursor freezes in its previous location. It will not move. It apppears that touch screen turns off. To turn off the computer, I pressed the power button.

When I start in safe mode the touchpad works very well.

I reinstalled the driver touch screen safe mode ATP. No joy.

This has happened in the last two days. After it happened, I did a full scan with a Norton freshly updated in safe mode. Only a minor tracking cookie has been found and fixed. The problem has not disappeared.

Do I have to restore full or is it just a simple fix?

Hello

Two methods:

1 try a restore of the system back to before that happened.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
-----------------------------------------------------

2A. What antivirus/antispyware/security products do you have on the machine? Be one on which you ALREADY had
This machine, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

-----

2 B follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

==========================================

2 C. After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

2. D Vista and Windows 7 updated drivers love then here's how update the most important.

It's my generic how updates of appropriate driver: (include reinstalling the drivers for the touchpad).

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.

Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.

Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

Hope these helps.

Rob - bicycle - Mark Twain said it is good.

Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

Original title: Max the mouse

I had a little friendly MS mouse pointer / cursor schema greet me on the initialize upward from Win 98 to Win 2000 Milnm, finally to Win XP. It was simple, little grey mouse that has nibbled cheese if the program was busy. Since the abandonment of Win XP, I bought a Dell E6440 with Win 7 Pro installed. I used a USB transfer cable / program to migrate settings and files above. My favorite mouse pointer scheme is not. I tried to change my plan of cursor recorded, but Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

Someone at - he saw this original classic pointer / cursor for Win 7 64 bit?

Thank you, Mr. Singh. That did not help. But for the record, I finally found the correct cursor plan I was looking here: http://www.rw-designer.com/cursor-set/mouse download a .zip file that I had bad access to when you change the pointer of the mouse, but resolved by downloading each schema of cursor .ani and .cur individually on the site. I used this from Win 98 to Win XP.

How to edit text in Design view - that is to say get one I have instead of the arrow cursor

DW CS6 it is a very clear basis on the question of the concept. Normally, I work in code view and have no problem. Sometimes, there is a big block of text in a paragraph that is in a div.
I want to correct a simple typo or insert a text more directly from the view in design mode. However, almost all the time, when I click on-site I change, the cursor is an arrow and the whole div Gets a yellow border. I still have the selection arrow, not the vertical bar I have to edit.
Sometimes I seem to fall on the right set of clicks and get the Edit bar.
Thanks for your suggestions.

Design mode can get quite cranky when your code contains errors.

Check the validator to http://validator.w3.org and make sure you are working with clean code before resorting to wiping preferences, or by reinstalling config files.

If your code is clean and it is still not allow to click your text in Design view, you may have a problem of indexing of z. I noticed on the pages that use a lot of positioning (APDivs) you can accidentally hide your text boxes with transparent/virgins areas of other elements and cause problems when trying to access this text at a later date.

It's all guesswork without however to see your actual page.

Could you post a link?

MacBook pro 2 logon screen starts with no arrow cursor and must be restarted

2014 Macbook Pro screen Retina 2 13 "opening session starts with no arrow cursor and must be restarted once every five tests. When the computer reboots, message appears asking you if it must open programs that had started to load or cancel. It is a recent problem that does not occur two months ago. Once restarted, everything seems to be OK. That is what it is?

Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

I pushed cntrl alt delete push end treat a moment I have nothing, I don't see my arrow cursor cant access is almost anything. What process I end a how can I reopen a return to normal?

I pushed cntrl alt delete push end treat a moment I have nothing, I don't see my arrow cursor cant access is almost anything. What process I end a how can I reopen a return to normal?

This all started because I get a warning about upgrading one pay for vista internet security 2010 alert... every 2 minutes it would be enterupt of me

Hello

Just in case there are persistent pieces of malware here is the method of complete elimination.
.exe question difficulty in the next message.

Try Mode safe mode with networking - repeatedly, press F8 that you start.

The best two methods allow scanners to run and/or AV.exe out of the way or removing.

1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

If necessary use start - computer or Windows Explorer to navigate to

C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.

Right-click on it and rename it to ZZMbam.COM (or something different than now), then
Double-click it and run it like this. You can rename it back later. Do the same with others
programs as needed. Use this method for other necessary - DO NOT ASSUMER one
program removes all or that there is no other malware.

---------------------------------------------------

2.
Another method is to use them:

Use Process Explorer to "Suspend" the process will not stop

Then use AutoRuns to delete the malicious program startup items.

Now use UnLocker to delete the files in the malware.

You may need to do a file at a time.

Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

AutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

UnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

AV.exe

==============================================

Vista Internet Security is just another name for these:

Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
scams to get you to pay for them while they have no advantage at all.

How to remove Vista Internet Security
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

RENAME this as necessary to allow them to perform: (use .com instead of .exe)

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can download
here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

http://OneCare.live.com/site/en-us/default.htm

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Possible bug found in hyperlinkctrl.c when you use the "VAL_POINTING_FINGER_CURSOR" mouse cursor in your own user interface.

Hi people, I think I found a bug in the hyperlinkctrl.c custom control, after the update/upgrade an old project CVI.

I found when I started using the "VAL_POINTING_FINGER_CURSOR" mouse in my UI, when adding a new hyperlink control.

The error is recoverable error: ' from the mouse cursor is not valid.

This error breaks in RunUserInterface (never seen anything like this before and I use CVI since version 3.1).

This happens whenever I mouse - hovering anywhere on the Panel that contains the new hyperlink control.

I also had a hack temporary to solve the problem, for now, I'll pass it along to this announcement...

The hyperlink control's source code is located in \toolslib\custctrl\hyperlinkctrl.c

The bug/problem lies in the service of reminder (of HyperLinkPanelCallback), specifically in lines 460 to 465.

This hyperlink control wants to use the VAL_POINTING_FINGER_CURSOR as its default cursor when you hover over the custom hyperlink.

However, if you already use 'VAL_POINTING_FINGER_CURSOR' in your user interface, the branch which verifies that you use what he thinks is 'his own' thread-safe mouse cursor ID, so that can reset it by using his "token concatenation" - created macro "GetTsvCursor", is not an 'else' branch to protect the picture when you actually use the cursor pointing finger... where the error that the mouse cursor is not valid. Here is the snippet of these lines.

The mouse is not over a hyperlink
If (cursor is VAL_POINTING_FINGER_CURSOR)
{
Reset the cursor to the previous cached cursor
cursor = GetTsvCursor();
errChk (SetMouseCursor (cursor));

... etc...

}

So my hack was to change the type of cursor to "VAL_CHECK_CURSOR" in place and place the cursor of "VAL_POINTING_FINGER_CURSOR" in three locations in this function, then rebuilt files x 86 and x 64.

Hey Luis, finally win a free T-shirt of LabWindows/CVI with not only have reported this bug, but also to give the precise location of the source, as well as a work around?

:^)

JB

In the meantime, I have submitted a bug with ID #545203 report to track down this problem.

-Johannes

PL/SQL: ORA-00904 invalid identifier, PLS-00225: reference of the subprogram or cursor is out of reach

Hi gurus,
Your help is greatly appreciated.
Will I have a fucntion where we have the object it contains.
The changes that I have doen are: 2 new cusrosrs, but its failure with the error below.
Highlighted are the changes I made. his length very well before your help is greatly appreciated.
1) PL/SQL: ORA-00904: "GET_ACQ_ID.". ' ACQ_ID ': invalid identifier.
(2) PLS-00225: subprogram or cursor reference 'GET_ACQ_ID' is out of range
Here is the code:
_________________________________________________________________________
FUNCTION GET_IP_COMM_INFO return PROD. TERMINAL_IP_COMM_INFO_TAB IS
vTer TER.ter_id%TYPE;
vAPPL_ID TAC.appl_id%TYPE;
vValue TSF.vALUE%TYPE;
IP_COMM_INFO_LIST PROD. TERMINAL_IP_COMM_INFO_TAB: = PROD. TERMINAL_IP_COMM_INFO_TAB();
CURSOR GET_ACQ_ID IS
SELECT ACQ_ID
TER TAHA, MERC M, PROF
WHERE T.MER_ID = M.MER_ID
AND M.PROFID = P.PROF_ID
AND T.TER_ID = vTer_id;

CURSOR GET_INFO_CURSOR IS
SELECT H.DESCRIPTION AS HOST_DESCRIPTION
PROD. HOST H, PROD. APP_IP_COMM_ACCESS_INFO AICAI
WHERE (AICAI. HOST_ID = H.HOST_ID) and
(AICAI. APPL_ID = vAPPL_ID);
CURSOR GET_ACQ_CURSOR IS
SELECT H.DESCRIPTION AS HOST_DESCRIPTION
PROD. HOST H, PROD. APP_IP_COMM_ACCESS_INFO AICAI, PROD. ACQUIRER_IP_COMM_ACCESS_INFO ACICAI
WHERE (AICAI. HOST_ID = H.HOST_ID) and
(AICAI. APPL_ID = vAPPL_ID) AND
(ACQUIRER_ID = GET_ACQ_ID. ACQ_ID);
BEGIN

vTer_id: = GLOBAL_VARIABLES.gv_ref_Ter_id;
BEGIN
SELECT the VALUE IN vvalue OF Tsf
WHERE TER_id = vTEr_ID AND APPL_ID is vAPPL_ID and FEATURE_ID = 861;.
Vvalue = '04' IF THEN
For GET_ACQ_REC IN GET_ACQ_CURSOR
LOOP
IP_COMM_INFO_LIST. EXTEND;
IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_ACQ_REC. HOST_DESCRIPTION);
END LOOP;
ON THE OTHER
FOR GET_INFO_REC IN GET_INFO_CURSOR
LOOP
IP_COMM_INFO_LIST. EXTEND;
IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_INFO_REC. HOST_DESCRIPTION);
END LOOP;
END IF;
RETURN IP_COMM_INFO_LIST;
EXCEPTION WHEN OTHERS THEN
LIFT;
END GET_IP_COMM_INFO;
----------------------------------------------------------

You try to access another variable of slider within the slider...

CURSOR GET_ACQ_CURSOR IS

SELECT H.DESCRIPTION AS HOST_DESCRIPTION

PROD. HOST H, PROD. APP_IP_COMM_ACCESS_INFO AICAI, PROD. ACQUIRER_IP_COMM_ACCESS_INFO ACICAI

WHERE (AICAI. HOST_ID = H.HOST_ID) and

(AICAI. APPL_ID = vAPPL_ID) AND

(ACQUIRER_ID = GET_ACQ_ID. ACQ_ID );

But you have not opened this slider, or anything like that.

You will probably need to pass as a parameter, just like a function:

(not sure of the type of data, so I assumed that the NUMBER)

CURSOR GET_ACQ_CURSOR (NUMBER in_acq_id) IS

SELECT H.DESCRIPTION AS HOST_DESCRIPTION

PROD. HOST H, PROD. APP_IP_COMM_ACCESS_INFO AICAI, PROD. ACQUIRER_IP_COMM_ACCESS_INFO ACICAI

WHERE (AICAI. HOST_ID = H.HOST_ID) and

(AICAI. APPL_ID = vAPPL_ID) AND

(ACQUIRER_ID = in_acq_id );

When you call this type, you must pass a value... So, it seems that you first call the other cursor.

Change this code:

IF Vvalue = ' 04 "THEN

FOR GET_ACQ_REC IN GET_ACQ_CURSOR

LOOP

IP_COMM_INFO_LIST. EXTEND;

IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_ACQ_REC. HOST_DESCRIPTION);

END LOOP;

ON THE OTHER

To do this:

IF Vvalue = ' 04 "THEN

FOR GET_ACQ_ID_REC IN GET_ACQ_ID IS

LOOP

FOR GET_ACQ_REC IN GET_ACQ_CURSOR (get_acq_id_rec.acq_id)

LOOP

IP_COMM_INFO_LIST. EXTEND;

IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_ACQ_REC. HOST_DESCRIPTION);

END LOOP;

END LOOP;

ON THE OTHER

(Or something like that)

I wasn't sure if your GET_ACQ_ID cursor returns only 1 row or not? If it returns more than 1 row, how to cope, you do not specify.

If it's just 1 row, then you can probably simplify it a little more:

IF Vvalue = ' 04 "THEN

SELECT ACQ_ID

in l_acq_id

TER TAHA, MERC M, PROF

WHERE T.MER_ID = M.MER_ID

AND M.PROFID = P.PROF_ID

AND T.TER_ID = vTer_id;

FOR GET_ACQ_REC IN GET_ACQ_CURSOR (l_acq_id)

LOOP

IP_COMM_INFO_LIST. EXTEND;

IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_ACQ_REC. HOST_DESCRIPTION);

END LOOP;

ON THE OTHER

Hope that helps.

Where the Panel haze cursor effects?

I have Lightroom CC and it is completely up-to-date (2015.1 and ACR 9.1). However, I have not an effect controls panel and the mist of cursor. Why? How can I get? I tried to stop cloud and then record in vain.

The develop module go to:

Window > panels > effects

Or press ctrl + 7

Is it possible to use the Photoshop brush in Flash?

Hello. I've always said that drawing with my bamboo create & Touch was good, but was not the same as the drawing in real life. Actually, that brings me a lot of problems, because even if it is good, is good enough for me. What happens to me when I use the Flash, but when I use Photoshop, it's much better! It's almost like real life. Is there a way to export information/setting/preference tool in the Photoshop brush (something like these things) in Flash?

Lol but you can create graphs completely in Photoshop and import them into Flash. You can also very easily with the right button on a bitmap in your library and "Edit with Photoshop". Whatever you do, if you save it, goes-automatic update in Flash.

Flash is not designed to create elaborate bitmap graphics. It is preferable to the vector, but none of those really all use the tool that is designed for it. Flash is generally what is used to take over media and mount it in an animation or application.

Browser 'Back' arrows do not work with the Flash buttons.

Can't seem to get around this problem...
I did several keys flash for use in my navigation bars. They work fine, but the 'return' arrows on the browser are still grayed out. It does not matter what kind of browser I use.
Flash keys are embedded in the pages and the site was done in Dreamweaver. I posted the same question on the Dreamweaver forum and got vague answers.
Is there a code I can put in my Flash buttons?
If you have an answer please be specific as I'm not an expert.
The site is fireonmcginnis.com
or just type 'Fire on McGinnis' in a search engine.
-Toastieo

Spry or regular hyperlinks in a list configuration or nav. One is better than the buttons Flash.

It's a search bot will read the HTML in these types of links (spry or HTML) and indexes. Way if you have a calendar of events for upcoming shows, or a Discography page, can and will be able to make a reference to them in search engine databases later (usually about 72 hours after indexing). Using the Flash, there is no code for the bot to find and your upcoming events, or a download page if there is one, will never be seen in a search even if people look directly to "fireonmcginnis: Annex", or "music by fireonmcginnis" because Google, Yahoo, Lycos and other pages simply do not exist.

Spry is great if you have submenus, and since it can be customized using CSS, you can make it match your layout of the site. You can also do with hyperlinks regualr and CSS, but spry looks more attractive to a large number of Internet users and the submenus are a little more difficult with basic HTML.

For the record, the script should read: getURL ("http://www.site.com/page.html""_self"); for the buttons. There's a drop down to select _blank, _self, _parent etc when you add the getURL script to the button.

But... you need to stay away from the keys Flash for navigation or you're really defeat the purpose of putting a band on a Web site in the first place. It is the exhibition and keys Flash will limit seriously that exposure, even if they are working correctly.

Statement of the type of cursor in package/sp
Hello
I use the package with sp than using slider as below:

--#1============================ PACKAGE
{THE PACKAGE AS ORA_PK_TR2
Type CURS_01 IS REF CURSOR; -return RYBB. T_COLLECT % rowtype;
Procedure ORA_SP_CUST (present in date_exp,
END

--#2============================ BODY
create or replace
PACKAGE ORA_PK_TR2 BODY as
Procedure ORA_SP_CUST (present in date_exp,
open_CURS_01 OUT CURS_01) IS
BEGIN
SQL_string = "(select * de RYBB.)" T_COLLECT where col =' | DATE_EXP)"

Open_CURS_01 OPEN FOR SQL_STRING;

END;

-3 # = RUN_PORTION

DECLARE
DATE_EXP DATE;
OPEN_CURS_01 RYBB. ORA_PK_TR2. CURS_01;
TYPE_IN RYBB. T_COLLECT % ROWTYPE; -/ * < = go to the package
BEGIN
Date_exp: = 10-seven.-10';
RYBB. ORA_PK_TR2. () ORA_SP_CUST
Date_exp = > date_exp.
OPEN_CURS_01 = > OPEN_CURS_01
);
LOOP
Look FOR open_CURS_01 IN TYPE_IN;
EXIT WHEN open_CURS_01% NOTFOUND;
DBMS_OUTPUT. PUT_LINE (TYPE_IN. COL1 | » '|| TYPE_IN. COL2); -/ sample
END LOOP;
END ;}

I need to put TYPE_IN declation of cursor inside the packaging, so the user who will run this pack/sp deals with this structure. How I can do this,
I tried to use < return RYBB. T_COLLECT % rowtype; > in the package but then I get:
Error (122,6): PLS-00455: cursor 'open_CURS_01' cannot be used in a dynamic OPEN SQL statement.
Not sure I can somehow in the BODY and make it available to the user?

Help you enjoy.

Best
Trent

Published by: trento on 13 Sep, 2010 14:36
Hello

Slider strong Ref (with a return type) cannot be used with dynamic SQL
because the compiler cannot check dynamic SQL return type during compilation.
String ref cursor can be used only with static SQL.
Dynamic SQL can be used only with the low (untyped) cursor variables.

You can use static SQL in your procedure, look at this example:
```
create or replace
PACKAGE TEST AS
  TYPE CURS_01 IS REF CURSOR RETURN SCOTT.EMP%ROWTYPE;
  Procedure ORA_SP_CUST (EXP_DATE IN date, open_CURS_01 IN OUT CURS_01 );
END TEST;
/

CREATE OR REPLACE
PACKAGE BODY TEST AS

  PROCEDURE ORA_SP_CUST (EXP_DATE IN DATE, OPEN_CURS_01 IN OUT CURS_01 ) AS
  BEGIN
    OPEN OPEN_CURS_01 FOR
        SELECT * FROM SCOTT.EMP WHERE SCOTT.EMP.HIREDATE = EXP_DATE;
  END ORA_SP_CUST;

END TEST;
/

VARIABLE CR REFCURSOR;

BEGIN
   test.ORA_SP_CUST (TO_DATE('1981/12/03', 'yyyy/mm/dd'),
                     :cr );
END;
/

print :cr

CR
---------------------------------------------------------------------------------------------------------------------------------------------------------------
EMPNO                  ENAME      JOB       MGR                    HIREDATE                  SAL                    COMM                   DEPTNO
---------------------- ---------- --------- ---------------------- ------------------------- ---------------------- ---------------------- ----------------------
7900                   JAMES      CLERK     7698                   1981/12/03                950                                           30
7902                   FORD       ANALYST   7566                   1981/12/03                3000                                          20                     
```

Brush the flashing arrow cursor cursor

Similar Questions

Maybe you are looking for