BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

Similar Questions

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.

• Cannot start after the blue screen "page in the nonpaged area failure."

  My sons laptop has got to me.  There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.

  I tried all F8 options, without success.  I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not.  I ran diagnostics memory on the scope option and who found nothing.

  No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!

  I would be grateful for any suggestions that anyone can have.  I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?

  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• U310 - "failure page in the nonpaged area."

  Hello

  I have Lenovo IdeaPAd U310. Since a few days, I have problem with booting the operating system. When I turn on, after that a few seconds system displays a BSOD with an error "page in the nonpaged area failure." After that computer try to fix yourself, then restart and... system displays a BSOD with error 'page in the nonpaged area failure' it is the same in safe mode. So I can't back up my data from the HARD drive or check system settings or drivers. I can run BIOS and boot menu, I changed the boot sequence, but the computer boot form USB CD or USB key.
  What I would do. How private backup files form HARD drive?

  My job U310 now I used onekey recovery and now have windows 8. My problem has been resolved.

• Win 7 will not install my old version of still

  I have a new computer with Windows 7 as operating system. On my old Win Xp computer, I used Encore 1.7 and it worked fine. Now my new system will not install my old version yet. What are my options? I still like I'm used to it.

  Thank you

  Phil Taylor in Montana

  It would probably never work. Architecture of Windows Media has fundamentally changed and the CoDecs does not, even if you somehow have it installed, which probably won't be possible. And unfortunately still is not sold separately more, so you should have a shape any new suite or Premiere Pro where it is included. In those circumstances, the best cost effective way would get the creative cloud.

  Mylenium

• Win 7 will not install, says blocking system Mechanic 6

  System Mechanic 6 has been removed years ago. Remnants of it blocks the installation of Win 7. Please advice how to remove the blockage.

  You try to perform a clean boot?

  http://support.Microsoft.com/kb/929135

  Also check C:\Program Files for all System Mechanic records and delete them.

• Update Windows not finding updates/East remained after fresh installation of win 7 pro on the laptop of dell d610 32bits.

  Hello

  I have recently re - installed win 7 pro on a 32-bit computer laptop dell d610 and after installing some updates it now just says: "check for updates...". "on the windows update screen and the green light just continues to go everywhere for centuries if I leave.

  I have also no wireless connection just a wireframe.

  I've added a certain drivers from the dell website including an update of the BIOS.

  When Windows 7 was installed it has 4 drivers problems / missing in the Device Manager and since the update of dell, there are now 2 problems with

  Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family and the controller of the network if I thought I had added the driver for this.

  I tried to use them, but they make no difference:

  WindowsUpdateAgent-7, 6 - x 86 (I also tried to install an equivalent standalone update for it and he says just looking for updates on this computer and also keeps going and going)

  WindowsUpdateDiagnostic

  MicrosoftEasyFix50202

  MicrosoftEasyFix20179.mini

  tweaking .com - reset the registry permissions

  Its a genuine product key as it turned on and I think that sp1 is built in otherwise it wouldn't activate.

  I tried to solve this for a week now without success any help would be really appreciated.

  Thank you very much

  Craig

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

• Downloaded driver intended to spend my Win 7 to 8 Win C309n will not install. Any Suggestions?

  I've updated to a computer with Windows 8.  The original disc downloaded for my Photosmart Web C309n for Windows 7 is not recognized by the computer, unfortunately nor is a new download for 7 or a download for Windows 8.   Suggestions (which do not include replace a perfect all-in-one?)

  Success!  I have now to find a fax line number, but that's small stuff it worked before.  (It says the phone line not of the correct type but it is the same one that I used before moving.)  I'll work on that.

  8lives, you're a champion!  Thank you!  I'm a happy camper.

• El Capitan will not install. Error message "file system check or repair a failure." Had to reboot with the snow leopard disc.  Any suggestion what happens?

  Trying to upgrade Snow Leopard to El Capitan.  El Capitan will not install.  Get the error message "failed to file system verify or repair.  Quit the installer to restart your computer and try again. "After Setup could not restart without using the Snow Leopard disc (then to download all updates for Snow Leopard).  I tried reinstall and same results.  (in fact made three times)  I'm back to Snow Leopard 10.6.8... Any ideas what is happening.

  Dealing with the corrupt downloaded in OS X

  Dealing with the corrupt downloaded on OS X (2)

  Download Mavericks cannot be verified also applies to Yosemite.

• KB2160841 will not install win 7 .error code 66A

  "Original title:" kb2160841 will not install win 7

  I tried the installation manual ' can low but the installation gives me a message that says doe. s does not apply to this os or blocked I get error cde 66A, I'm under win 7 cannot install auto or manual

  Help! tomt2006

  See the section "How to get help" of http://support.microsoft.com/kb/2160841

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• OfficeJet 7310: Officejet 7300 series software will not install on new pc Win 7

  My Officejet 7310 networked HP software will not install on my new Dell Precision Tower 3620 running Windows 7 64 bit.

  Downloaded file is: AIO_CDB_Net_Full_Win_WW_130_141.exe

  * When you run the Setup program, two errors that have occurred having to do with the system who don't not USB capacity or equipment. (There are about 8 USB ports that work, some USB 3.0, any other USB 2.0).

  * Try with disabled firewall doesn't change anything.

  * If I'm running the original printer installation disc, it downloads the new software and I find myself in the same dead end.

  Sitting next to this machine is my (dying) old workstation Dell Precision 390 with Win 7 and operate the HP and related applications very well Solution Center with the same network printer. (The two machines work protection antivirus Malwarebytes'.)

  It sounds crazy!  Any suggestions on how to fix would be greatly appreciated.

  Hello

  Run the Setup program and comlpete extrction process.

  Once the installation dialog box appears to put an end to this window.

  In Windows Explorer, press and type % temp % fall.

  Locate the most recent installation folder, which begins with 7z (e.g. 7z1234s)

  Open the installation folder.

  Rename the file named usbready.exe in usbready1.exe

  Back a levell and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Please let me know the results,

  Shlomi

• installation of Adobe is already running on mac osx10.9.5 will not install lightroom 6.0?

  installation of Adobe is already running on mac osx10.9.5 will not install lightroom 6.0?

  You can please download Lightroom6.0 here: Install Photoshop Lightroom

  (After downloading the .7z file, you must first extract and then run installation, if you go directly launch the setup that it will not be installed)

  If there is still Trouble in installation please contact customer (support Chat), they will help you to install your application.

  Adobe customer care http://helpx.adobe.com/contact.html

  • Remember that you are logged on the page with your Adobe ID.
  • Select your product and what you need help with
  • Click on the blue box "still need help? Contact us. "

• First Pro CS5.5.2 will not install after the replacement of the motherboard?

  First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

  Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

  Ideas for resolving the issue wou; LD appreciated.

  Also available at the section of material http://forums.adobe.com/message/4634472

  There is a new forum for download & install and installation issues

  http://forums.Adobe.com/community/download_install_setup

  Or, call Adobe

  In the United States - Adobe install problems 800-642-3623

  In the United States - Adobe Activation 866-772-3623 Open 24/7

  I offered to provide information of make and model of motherboard

  [Additional information about else added]

• Satellite C70D PAGE FAULT IN NONPAGED AREA - frequent BSOD

  Hello

  for awhile, my laptop is a blue screen several times a week, e-mail: PAGE_FAULT_IN_NONPAGED_AREA.

  Past discharges according to the attachment.

  How to recover from this?

  Help, please.

  Thank you
  Alex

  I also have this error sometimes, all my BSOD can be found here - http://answers.microsoft.com/en-us/w...7866#LastReply

  Most of the drivers are probably obsolete and not for Windows 10... For example my BSOD is caused by AR8171 of Qualcomm Atheros driver...

  BUMP...

• Installation of HP will not install on Windows 7

  HP 3210 all-in-one will not install on win 7 all your solutions have me chasing my tail for about 2 days... Please help

  Mike Garrotto

  It is a forum for users of peer-to-peer supported. HP maintains no official presence in this forum.

  When you request support, please provide the HP model name and/or product full number of the material in question. In addition, please provide brand and full model name or number of the computer used. Also indicate what you're trying to do and how the equipment is connected between them.

  Please send Bravo