Satellite C70D PAGE FAULT IN NONPAGED AREA - frequent BSOD

Similar Questions

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.

• Portege M400: update XP to Vista causes the page fault in nonpaged area

  I spent several hours working through the Vista upgrade only. After a restart the process, I get a BSOD now reporting a page fault. Microsofts advice was to regularize the upgrade and then try again. Useful (or not) This resulted in the same second time around. The office is now closed for the weekend, probably because no one gets questions Friday night / on weekends?

  There is a KB on support.microsoft.com (kb 939720) which refers to a similar problem and a fix, but you can not download it - you must call. All other users Portege had the same problem and how they have solved their?

  Concerning

  Chris

  Hello

  just a quick question: have you already installed the BIOS compatible Vista on your computer? It s one of the most important steps before installing the 'wonderful' on your drive Vista hard (I don't understand why you need but it s OK your machine... ;))

  If it isn't already, go to the website of Toshiba Driver download and download the latest BIOS for machine (Vista compatible) which is absolutely essential if you decided to put Windows Vista on your computer.

  Here´s the link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Would appreciate any comments about your situation.

  Greetings

• U310 - "failure page in the nonpaged area."

  Hello

  I have Lenovo IdeaPAd U310. Since a few days, I have problem with booting the operating system. When I turn on, after that a few seconds system displays a BSOD with an error "page in the nonpaged area failure." After that computer try to fix yourself, then restart and... system displays a BSOD with error 'page in the nonpaged area failure' it is the same in safe mode. So I can't back up my data from the HARD drive or check system settings or drivers. I can run BIOS and boot menu, I changed the boot sequence, but the computer boot form USB CD or USB key.
  What I would do. How private backup files form HARD drive?

  My job U310 now I used onekey recovery and now have windows 8. My problem has been resolved.

• Cannot start after the blue screen "page in the nonpaged area failure."

  My sons laptop has got to me.  There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.

  I tried all F8 options, without success.  I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not.  I ran diagnostics memory on the scope option and who found nothing.

  No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!

  I would be grateful for any suggestions that anyone can have.  I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?

  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get the Blue error screen: "error of Page in the nonpaged area".

  Original title: Page fault

  I get a blue screen Page fault in non paged area... just above what it lists win32k.

  I get this error when you create a new contact in Outlook or by using Firefox.  I can use IE 8 without any problem.  Do not know what is causing this problem.

  LJ

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  http://msdn.Microsoft.com/en-us/library/ff559023%28VS.85%29.aspx

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

  A day at the start of a program on my computer that I used for years without incident, the computer suddenly fell down, restarted, and I got the infinite loop of system repair. No change in hardware/software, don't know if a recent Windows Update has been installed. Once again, CPU, mobo, Vid, RAM are the same for the past 4 years.

  After much frustration, I decided to just reinstall Win 7. So I deleted my partition, re-created a new partition and installed Win 7

  In the last step of the process of installing Win 7, it says Setup cannot complete. It is then stuck in a loop of reboot with a BSOD page fault in non paged area.

  I tried F8 on startup and choose Safe mode, but then he says that the installer cannot boot mode safe because the installation of Win 7 did not finish.

  I tried to reinstall Win7 by removing the disc again, but I get the same results.

  What can I do?

  HI - finally got the job. I had the computer to use only the GPU on board BIOS and was able to install. Somehow the graphics driver conflict when Windows is first installed and it kept crashing.

  Thanks for your help.

• Satellite C850-1NU - BSOD with Page fault in non paged area error

  So basically I was looking through the web on my laptop, and then suddenly I got a blue screen of death.
  It said Page fault in nonpaged area.

  Some people say it means that the RAM could be faulty.
  Is this true and if it is faulty should I take it back to PC world where I bought it?

  Thanks ;)

  Hello

  The BSOD could be caused by system problems or malfunction of the equipment.

  .. and Yes; the BSOD containing the paginated Page Fault in any area error could be related to memory problems, but it could also be a temporal problem that appeared one last time

  But if this BSOD will appear in the future for the umpteenth time, I recommend you contact the service partner to verify the material.

• Frequent BSOD PAGED_FAULT_IN_NONPAGED_AREA please help

  My PC blue screens in six minutes to start no matter what I'm doing and I can't put my finger on why. I put my dump file in a rar for you guys to take a look at, thank you very much!

  Link to download:

  http://www.speedyshare.com/WcUVP/minidump-file.rar

  Also as a note, I've already tried sfc/f/r and it has not fixed this issue.

  Let me know what I please!

  Hello

  Bugcheck 50, {fffff6fb40000000, 0, 0, 6}

  Could not read the name of the problem driver
  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'chain' + 32 d 48)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  1. check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Updated BIOS, drivers of low level chipset and on-board major
  and separate device drivers. See the updated driver below methods.

  BiosVersion = F.1C
  BiosReleaseDate = 06/07/2013
  SystemManufacturer = Hewlett-Packard
  SystemProductName = HP ENVY 17 Notebook PC
  Family = 103C_5335KV G = N L = CON B = HP S = ENV
  SystemVersion = 0884100000305B 00000620100
  SystemSKU = E0K90UA #ABA
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 1968
  BaseBoardVersion = Version KBC 93.34

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  2 check memory very carefully (see memory test methods below).

  3 use ALL methods in the troubleshooters below if necessary.

  4 if necessary execute DriverVerifier to see if it can indicate a CAUSE (see method DriverVerifier
  below).

  =========================

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA<-- read="" this="">
  http://msdn.Microsoft.com/en-us/library/ff559023 (v = vs. 85) .aspx

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names (and BIOS and chipset).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ========================================================

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC (Windows 8/8.1)
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to update Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a USB Flash Drive recovery or other methods:

  How to create a recovery USB in Windows 8 & 8.1

  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  --------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 8 errors and Crash_ Page fault in non paged area + attempt to write a readonly database

  Hello

  I am running Windows 8 on my PC and have seen the Failure of Page in the nonpaged area error when starting and stopping down a few times.

  Recently, she was accompanied by an attempt to write a readonly database error starting up, which led to several auto-redémarre.

  Here is the link to download the Minidump files on my computer, if that would help.

  http://1drv.Ms/1nOJ8If

  Please guide me how to on this subject.

  Thanks in advance,

  Rohan

  Rohan

  These related to the 802.11 Wireless netr28x.sys adapt Driver Ralink Technology, Corp..  I would setup the possible latest driver even if it is the same date that drivers become corrupt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading file Dump [C:\Users\Ken\Desktop\New folder\061814-23656 - 01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff801 'f0c1b000 PsLoadedModuleList = 0xfffff801' f0ee7aa0
  The debugging session: Wed Jun 18 03:25:39.915 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:10.667
  Loading the kernel symbols
  ..

  Press (cdb, ntsd, kd) ctrl-c or ctrl-BREAK (windbg) to drop the charges of symbol that take too much time.
  Run! SYM noisy before .reload to track symbols loading issues.

  .............................................................
  ................................................................
  ...
  Loading user symbols
  Loading unloaded module list
  .....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88003a1e000, 1, fffff8800529b442, 0}

  WARNING: Unable to verify timestamp for netr28x.sys
  ERROR: Module load completed but symbols can be loaded for netr28x.sys

  Could not read the name of the problem driver
  Probably caused by: netr28x.sys (netr28x + 3e442)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88003a1e000, memory referenced.
  Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
  Arg3: fffff8800529b442, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  DUMP_FILE_ATTRIBUTES: 0X8
  Generated Triage of the kernel image

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff801f0f73168
  GetUlongFromAddress: cannot read fffff801f0f731f8
  fffff88003a1e000 non paged pool

  FAULTING_IP:
  netr28x + 3e442
  fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: AV

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff88000b89230-(.trap 0xfffff88000b89230)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff880039de000 rbx = 0000000000000000 rcx = 0000000000000282
  RDX = a 0000000 00000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff8800529b442 rsp = fffff88000b893c0 rbp = fffff88000b89540
  R8 = 0000000000000001 r9 = 0000000000000114 = 0000000000000000 r10
  R11 = fffff88000b89380 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  netr28x + 0x3e442:
  fffff880 ' 0529b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h ds:fffff880 ' 03a1e000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff801f0d363e5 to fffff801f0c75440

  STACK_TEXT:
  fffff880 '00b 89048 fffff801' f0d363e5: 00000000'00000050 fffff880 '03a1e000 00000000 00000001' fffff880' 00b 89230: nt! KeBugCheckEx
  fffff880 '00b 89050 fffff801' f0cafb2b: 00000000 00000001 "fffff880 '03a1e000 fffffa80' 0730eb00 fffff8a0'00000001: nt! : FNODOBFM: 'string' + 0x33c2b
  "fffff880 '00b890f0 fffff801' f0c72eee: 00000000 ' 00000001 fffffa80 ' b 0, 200000 fffff880 '00b 89400 fffff880' 00b 89230: nt! MmAccessFault + 0x55b
  fffff880 '00b 89230 fffff880' 0529b 442: fffffa80'0 b 200000 fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff: nt! KiPageFault + 0x16e
  fffff880 '00b893c0 fffffa80' b 0, 200000: fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff 00000000' 00000000: netr28x + 0x3e442
  fffff880 '00b893c8 fffffa80' b 0, 200000: fffff880'00 b 89540 ffffffff'ffffffff 00000000 00000000' fffff880'05291007: 0xfffffa80'0 b 200000
  fffff880 '00b893d0 fffff880' 00b 89540: ffffffff'ffffffff 00000000 00000000' fffff880'05291007 00000000 00000000': 0xfffffa80'0 b 200000
  fffff880 '00b893d8 ffffffff' ffffffff: 00000000 00000000' fffff880'05291007 00000000 '00000000 00000000' 00000000: 0xfffff880'00 b 89540
  "fffff880'00b893e0 00000000' 00000000: fffff880 ' 05291007 00000000 '00000000 00000000' 00000000 fffffa80 ' b 0, 200000: 0xffffffff'ffffffff

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  netr28x + 3e442
  fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: netr28x + 3e442

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: netr28x

  Nom_image: netr28x.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 531982e8

  FAILURE_BUCKET_ID: AV_netr28x + 3e442

  BUCKET_ID: AV_netr28x + 3e442

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_netr28x + 3e442

  FAILURE_ID_HASH: {5c6cc3bb-48d3-d6cb-422b-45f5619bcc52}

  Follow-up: MachineOwner
  ---------

• PAGE FAULT IN NON PAGED AREA and IRQL not less or equal

  I left my computer on overnight to come on this morning to find the blue screen of death saying IRQL not less or equal - I tried access through safe mode, but I get PAGE FAULT IN NON PAGED AREA. I tried and it was crossed by the last setting but I just got IRQL not less or equal - it's the next day, I quit a game on last night though.

  Edit: I can't quite

  Have you recently updated the video driver or a service update update it? Try restarting with the VGA driver or last known good configuration.

  Tom

• Toshiba Service Netherlands; dissatisfied consumers! Satellite C70D-A-114

  Dear users,

  My 8 week old * laptop Satellite C70D-A-114 * (purchased January 14, 2014) is down for the second time.
  It is still the HARD drive which gave, as well as a broken cd tray.

  Currently, the situation is that Toshiba blames me for inflicting damage to the laptop Satellite.
  Well, without any physical damage on the outside, it's a hypothesis rather bold, true?

  It is not just that I, as a consumer, have suffered a lot of frustration and discomfort by this second default when a 8 week old product, don't... Now, it's MY FAULT.

  After calling several times to a pretty expensive 'helpdesk'... which is now the result broken down from the Toshiba laptop which has not left my house since I bought it 8 weeks ago.
  (he also spent 2.5 weeks for repair and transport... so if you think... I used it about 6 weeks and now it is down for the second time)
  The laptop remains the repairfacility, until I paid for the repaircosts. 25% of the price - new.
  I lost not only my product, I'm subject to blackmail.

  In any case, feel like it... feel like I'm made to blame for a product that is less... that makes me furious!

  Way to go, Toshiba NL!
  Excellent service * not *.

  Post edited by: Satellite-user-NL

  Sorry to hear all this. Have you asked Toshiba hotline if there is only one service allowed in your country, or you can send it elsewhere?

  I mean Toshiba contracts with various small approved partners and if you are not satisfied with one of them tried to contact someone else and ask for help.

• Satellite C70D-B-310 - Webcam and the Microphone does not

  Cannot get my mic and the webcam doesn't work on Win7 64.
  Drivers are not available on the download section of Toshiba.

  That please?

  Toshiba Satellite C70D-B-310 PSCLEE.

  All the essential and necessary Win 7 64 bit drivers for Satellite C70D-B are available on the Toshiba UE driver page.

  The only webcam driver isn't available because AFAIK the Toshiba value added Package already contains the necessary driver to get the webcam working.

  The microphone part of the webcam and to be selected in the Panel? sound? Recording tab

• Satellite C70D-A-11 t - sound does not work with HDMI

  Hello

  I buy a Satellite C70D-A-11 t and pass it on Windows 7 64 bit Home Premium edition.
  I have install all drivers, and I have no problems.

  When I want to connect it to my TV for the first time, I discovered that there is no sound on the TV.
  I try to go on the speaker (near windows clock), right-click, sound, first tab (I think it's 'Read' in English... I have a french Windows) and my device (TV) does not appear.

  I'll be back on the Web site of Support of Toshiba to download the latest driver "HDMI Audio driver" for my laptop, I connect the cable, and it appears in the sound properties. I select it as default device and the Øresund have just my TV.

  Great!

  But when I restart my laptop (with or without the HDMI cable), TV disappear from the list in the sound properties, the only solution to reinstall the Audio HDMI driver to retrieve the sound.
  If I start the installation of the driver with the 'Advanced' option, I have the list of drivers to install and I see all the drivers are already installed, but the HDMI Audio Driver will be modernized... I have install and it works until the next reboot.

  Could you explain to me why the version of the driver do not remain on the system, and how to do the work without reinstalling every day?

  Thanks a lot for your help.

  Stéphane

  Someone here? :(

• Satellite C70D - Has: game lag due to the graphics chip?

  Hello

  I have laptop Toshiba Satellite C70D-A-11th week series 1.
  Unfortunately, I'm at the moment not really satisfied with the image... game is lagging because my graphics.

  My question is where you can find how much I consume the 4 GB.

  And where can I put I consume more or less. Since then, it is a separable memory Yes.

  My English is not perfect. hope someone understands.

  Please answer

  Hello

  Well, I m wondering why you bought a device with a (inner part of the CPU) graphics chip if you want to use the laptop for games?

  The laptop supports the AMD Radeon HD graphics 8400 which is part of the A6-5200 Quad-Core AMD processor.
  This GPU is similar to Intel HD GPU, which is also part of Intel processors.

  Such graphic internal cards are not really designed for a game of course, you would be able to run and play a game, but don t expect too much