Win 7 will not install, says blocking system Mechanic 6

Similar Questions

• Win 7 will not install my old version of still

  I have a new computer with Windows 7 as operating system. On my old Win Xp computer, I used Encore 1.7 and it worked fine. Now my new system will not install my old version yet. What are my options? I still like I'm used to it.

  Thank you

  Phil Taylor in Montana

  It would probably never work. Architecture of Windows Media has fundamentally changed and the CoDecs does not, even if you somehow have it installed, which probably won't be possible. And unfortunately still is not sold separately more, so you should have a shape any new suite or Premiere Pro where it is included. In those circumstances, the best cost effective way would get the creative cloud.

  Mylenium

• BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

  A day at the start of a program on my computer that I used for years without incident, the computer suddenly fell down, restarted, and I got the infinite loop of system repair. No change in hardware/software, don't know if a recent Windows Update has been installed. Once again, CPU, mobo, Vid, RAM are the same for the past 4 years.

  After much frustration, I decided to just reinstall Win 7. So I deleted my partition, re-created a new partition and installed Win 7

  In the last step of the process of installing Win 7, it says Setup cannot complete. It is then stuck in a loop of reboot with a BSOD page fault in non paged area.

  I tried F8 on startup and choose Safe mode, but then he says that the installer cannot boot mode safe because the installation of Win 7 did not finish.

  I tried to reinstall Win7 by removing the disc again, but I get the same results.

  What can I do?

  HI - finally got the job. I had the computer to use only the GPU on board BIOS and was able to install. Somehow the graphics driver conflict when Windows is first installed and it kept crashing.

  Thanks for your help.

• will not install updates of system restore will not be the recovery of the system (no installation cd)

  Hello out there!  Bought this machine at a pawn shop, HP seems another good charity that cannot get updates installed and that is all I want to do right now - knowing that I did a restore system first and made a recovery (ithink) cd and I see that a lot of the system drivers are disabled (don't know how do to light and cannot find material to read) that I'm sure is a simple solution for you, but for me - OH MY - thank - you, Vista 32-bit sp2

  http://welcome.HP.com/country/us/en/support.html

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Downloaded driver intended to spend my Win 7 to 8 Win C309n will not install. Any Suggestions?

  I've updated to a computer with Windows 8.  The original disc downloaded for my Photosmart Web C309n for Windows 7 is not recognized by the computer, unfortunately nor is a new download for 7 or a download for Windows 8.   Suggestions (which do not include replace a perfect all-in-one?)

  Success!  I have now to find a fax line number, but that's small stuff it worked before.  (It says the phone line not of the correct type but it is the same one that I used before moving.)  I'll work on that.

  8lives, you're a champion!  Thank you!  I'm a happy camper.

• HP4680 will not install supported operating system windows 7

  The impasse this printer when purchasing for more than one year. Returned after 4 months of a period far and printer would not communicater with the computer. (Laptop G72). I tried to reinstall the software and said "the systyem to use on this computer is not supported. Current OS: 601.64. "This computer is Windows 7. What I'm missing here?

  Using the original installation CD?

  Windows7 is listed as compatible on CD label?

  Otherwise, download and install the software Windows7 below depending on your printer model:

  HP Photosmart C4680:

  http://ftp.HP.com/pub/softlib/software11/COL27450/MP-68348-4/PS_AIO_05_C4600_NonNet_Full_Win_enu_140_047.exe

  HP Officejet J4680:

  http://ftp.HP.com/pub/softlib/software12/COL31050/MP-88608-2/OJJ4600_Full_14.exe

• KB2160841 will not install win 7 .error code 66A

  "Original title:" kb2160841 will not install win 7

  I tried the installation manual ' can low but the installation gives me a message that says doe. s does not apply to this os or blocked I get error cde 66A, I'm under win 7 cannot install auto or manual

  Help! tomt2006

  See the section "How to get help" of http://support.microsoft.com/kb/2160841

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Software CyberLink will not install on Win 8

  H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.

  Hello

  Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.

  Any suggestions on why Cyberlink programs will not install?

  Thank you

  Hello

  Check the compatibility of your products from Cyberlink here.

  The HP position maintenance for Cyberlink is only an update.

  If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required.  So just try to install Cyberlink under W8 then click on the products tab Compatibile.

  BTW, nice PC.

• OfficeJet 7310: Officejet 7300 series software will not install on new pc Win 7

  My Officejet 7310 networked HP software will not install on my new Dell Precision Tower 3620 running Windows 7 64 bit.

  Downloaded file is: AIO_CDB_Net_Full_Win_WW_130_141.exe

  * When you run the Setup program, two errors that have occurred having to do with the system who don't not USB capacity or equipment. (There are about 8 USB ports that work, some USB 3.0, any other USB 2.0).

  * Try with disabled firewall doesn't change anything.

  * If I'm running the original printer installation disc, it downloads the new software and I find myself in the same dead end.

  Sitting next to this machine is my (dying) old workstation Dell Precision 390 with Win 7 and operate the HP and related applications very well Solution Center with the same network printer. (The two machines work protection antivirus Malwarebytes'.)

  It sounds crazy!  Any suggestions on how to fix would be greatly appreciated.

  Hello

  Run the Setup program and comlpete extrction process.

  Once the installation dialog box appears to put an end to this window.

  In Windows Explorer, press and type % temp % fall.

  Locate the most recent installation folder, which begins with 7z (e.g. 7z1234s)

  Open the installation folder.

  Rename the file named usbready.exe in usbready1.exe

  Back a levell and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Please let me know the results,

  Shlomi

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  Hi Marleneb3511919,

  I'm sorry for the inconvenience caused to you.

  I guess you tried rebooting your system?  If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0

  Please let us know if this goes through.

  Kind regards

  Aurélie hamadi

• iPad Pro will not install the last update of iOS, says that it is not connected to the Internet. It is connected!

  MY iPad pro(9x7) will not install the last update of iOS. I get the message it is not connected to the Internet, but it is connected! I have f

  I istalled the update on my iPhone 6 without Ant problem. I tried switching off and on again, but the result is the same, it will not be installed.

  I just read a post that Apple released the 9.3.2 update for iPad 9.7 Pro. Cannot confirm this, but not me. See post by Phil.

  iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2

• 3.6.8 patch will not install. Message says that it cannot find liscense... .view homepage. What can I do? Using XP version 3.6.7

  3.6.8 patch will not install. Message says that it cannot find liscense... .view homepage. What can I do? I use XP and Firefox version 3.6.7

  This has happened

  Each time Firefox opened

  Is since mid-July

  Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.
  Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  You can skip the step to create a new profile, which is not required on this issue.
  .....
  See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• El Capitan will not install. Error message "file system check or repair a failure." Had to reboot with the snow leopard disc.  Any suggestion what happens?

  Trying to upgrade Snow Leopard to El Capitan.  El Capitan will not install.  Get the error message "failed to file system verify or repair.  Quit the installer to restart your computer and try again. "After Setup could not restart without using the Snow Leopard disc (then to download all updates for Snow Leopard).  I tried reinstall and same results.  (in fact made three times)  I'm back to Snow Leopard 10.6.8... Any ideas what is happening.

  Dealing with the corrupt downloaded in OS X

  Dealing with the corrupt downloaded on OS X (2)

  Download Mavericks cannot be verified also applies to Yosemite.

• I've updated Illustrator CS6 by CC (I also Illustrator CC installed for work) and now CS6 will not open say that missing a bunch of plugins. Any ideas on how to solve this problem?

  I've updated Illustrator CS6 by CC (I also Illustrator CC installed for work) and now CS6 will not open say that missing a bunch of plugins. Any ideas on how to solve this problem?

  Try the "all Apps" in blue on the right, there is another menu in the menu drop down, below people say "See the previous Versions..."